May 2014 - Discuss - lists.centos.org

Memory vs. Display Card
by Rick 28 Oct '25

28 Oct '25

Since memory has become quite cheap lately I decided to move from 2 GB to 6. When I installed the memory every thing was fine until I went to run level 5. At that point the screen turned to garbage and the system froze. Is there a way to fix this so I can use the memory I bought? Do I need a new display card? Current hardware: Intel D975XBX2 Motherboard VGA compatible controller: ATI Technologies Inc RV505 [Radeon X1550 64-bit] -- http://www.spinics.net/lists/

13 19

SSD for Centos SWAP /tmp & /var/ partition
by Keith Roberts 03 Sep '25

03 Sep '25

Has anyone actually used a SSD in a Centos setup? My little experiment with a s/h WD drive for /tmp and SWAP partitions kicked the bucket on Wednesday, when the poor WD drive caught the click-of-death. It was a s/h drive to start with and lasted about 4 months. But that was without the /var/log/ partition being written to it, as I mounted that back onto /var/log from the original drive. So I had to install another (WD) drive, and repartion it and rebuild my RPM package database, from the backed-up Packages file. That seems to be all OK now. I'm wondering if it would be a good idea to use a new SSD for moving all the disk i/o to, that Linux likes to do so often. Plus putting SWAP onto a decent SSD should speed things up somewhat. Here's a short video of a laptop fitted with a SSD drive booting macOS, compared to a similar laptop booting from the standard HDD. The laptop with the SSD boots and loads some apps in 28 seconds. The other one takes twice as long. http://eshop.macsales.com/shop/SSD/OWC/Mercury_Extreme_Pro_6G/?utm_source=t… Kind Regards, Keith Roberts ----------------------------------------------------------------- Websites: http://www.karsites.net http://www.php-debuggers.net http://www.raised-from-the-dead.org.uk All email addresses are challenge-response protected with TMDA [http://tmda.net] -----------------------------------------------------------------

33 96

Mail Merge data to a pdf file by overlaying the data on the image
by Gregory P. Ennis 07 Jun '15

07 Jun '15

Everyone, I am looking for a utility that I can use to do a mail merge of data to a pdf image file. The image file does not have any active fields, but will be just an image file. I would like to overlay names addresses etc. We currently do this with a pcl file by just overlaying the data with pcl print positions. However, in order to get the pcl file from an original pdf file we have to use gimp to convert the pdf to pcl file, and we always lose a little resolution. I was wondering if anyone knows of a utility to perform this function without first converting the image to a pcl file. Thanks, -- Greg Ennis

4 10

heavy IO load when working with sparse files (centos 6.4)
by Ron E 31 Mar '15

31 Mar '15

Dear List, We have noticed a variety of reproducible conditions working with sparse files on multiple servers under load with CentOS 6.4. The short story is that processes that read / write sparse files with large "holes" can generate an IO storm. Oddly, this only happens with holes and not with the sections of the files that contain data. We have seen extremely high IO load for example copying a 40 or 80gb sparse file that only has a few gigs of data in it. Attempts to lower the io priority and cpu priority of these processes do not make any measurable difference. (ionice, nice) This has been observed with processes such as: cp rsync sha1sum The server does have to be under some load to reproduce the necessary conditions. The cases we have seen involve servers running 10-30 guests under kvm. Load is in acceptable norms when the processes are run, such as load avg 5-15 on a 24 core (12 core with HT enabled) server. We also verify before starting such a process that the spindle with the file we're working on is not being unduly hammered by another process. These servers have one hardware raid controller each (Dell H700 controller with write cache enabled) and multiple raid arrays (separate sets of physical spindles). Interestingly, the IO storm is not limited to the array / spindles where the sparse file resides but affects all IO on that server. We have looked extensively and not found any account of a similar issue. We have seen this on configurations that are 'plain vanilla' enough to think that this is not something specific to our environment. Wondering if anyone else has seen this and if any suggestions on gathering more data / troubleshooting. We wonder if we've found either a raid controller driver issue, an OS issue or some other such thing. What seems to point in this direction is that even with ionice -c3 which should prevent the process from using IO unless the storage is idle, an io storm which appears to saturate the entire raid bus on a given server can occur. Thanks in advance.

3 3

Centos 6.4 on Xserve, IPMI error
by Arno B 31 Mar '15

31 Mar '15

Hello! I'm trying to install Centos 6.4 64 bit on this Xserve: http://www.everymac.com/systems/apple/xserve/specs/xserve-intel-xeon-2.8-ei… I got a bootloader from: http://blog.christophersmart.com/2009/07/23/linux-on-an-apple-xserve-efi-on… as none of the official Centos releases (full, minimal, network 64 bit) boot on this machine. They all crash when loading the bootx64.conf. I have built a USB stick with a working bootx64.efi, grub.cfg, together with an initrd and a vmlinuz from the isolinux folder. These seem to get me into booting a kernel until something called IPMI is starting to throw errors at me: Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si 0000:09:00.4: enable device (0002 -> 0003) ipmi_si 0000:09:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16 ipmi_si: Adding PCI-specified kcs state machine ipmi_si 0000:09:00.7: enable device (0000 -> 0003) ipmi_si 0000:09:00.7: PCI INT D -> GSI 17 (level, low) -> IRQ 17 ipmi_si: Adding PCI-specified bt state machine ipmi_si: Trying PCI-specified kcs state machine at mem address 0x90841000, slave address 0x0 irq 16 IRQ 16/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs Using irq 16 ipmi: Found new BMC (man_id: 0x00003f, prod_id: 0x0003, dev_id: 0x20) IPMI kcs interface initialized ipmi_si: Trying PCI-specified kcs state machine at mem address 0x90840000, slave address 0x0 irq 17 Refined TSC clocksource calibration: 2792.999 MHz. Switching to clocksource tsc IPMI BT: timeout in XACTION [ B_BUSY ] 1 retries left IPMI BT: timeout in XACTION [ B_BUSY ] failed 2 retries, sending error response IPMI: BT reset (takes 5 secs) IPMI BT: timeout in XACTION [ B_BUSY H2B ] failed 2 retries, sending error response IPMI: BT reset (takes 5 secs) IPMI BT: timeout in XACTION [ B_BUSY H2B ] failed 2 retries, sending error response IPMI: BT reset (takes 5 secs) IPMI BT: timeout in XACTION [ B_BUSY H2B ] failed 2 retries, sending error response IPMI: BT reset (takes 5 secs) IPMI BT: timeout in XACTION [ B_BUSY H2B ] failed 2 retries, sending error response IPMI: BT reset (takes 5 secs) then the screen goes to black and the machine doesn't respond to anything anymore... Can anyone please help me with this? Maybe just point me in a direction where to find a solution? I've been googling for a few days now without much results... thanks in advance Arno Beekman

2 1

chromium-33.0.1750.152-3.el6
by ngeorgop 24 Sep '14

24 Sep '14

*New version of chromium (33.0.1750.152)*Build by me :-)i686 chromium-33.0.1750.152-3.el6.i686.rpm <https://docs.google.com/file/d/0B9RlkKQB1POSWmFiT0REeG1QS28/> SRPM chromium-33.0.1750.152-3.el6.src.rpm <https://docs.google.com/file/d/0B9RlkKQB1POSQlZ1OUljT3p6U1U/> -- View this message in context: http://centos.1050465.n5.nabble.com/CentOS-chromium-33-0-1750-152-3-el6-tp5… Sent from the CentOS mailing list archive at Nabble.com.

5 6

mixing MX and CNAME
by aurfalien 27 Aug '14

27 Aug '14

Hi, Has any one had problems with mail clients were your DNS is like this; doman.com MX 50 mail.domain.com domain.com MX 100 mail2.domain.com domain.com CNAME www.domain.com -aurf

8 12

RH developer toolset
by Jerry Geis 13 Aug '14

13 Aug '14

I saw an article this morning about the RH developer toolset. basically it includes a couple of packages like PHP python mysql (etc) that are later packages than that included in the released version like a 6.4 for example. So instead of php 5.3 with patches it would be php 5.4 and so on. That is great for a couple packages - but what about more up to date libraries like glib. 6.4 is way behind on glib. Like a couple years behind. Are there any plans in the "toolset" to update core libraries also? Thanks, Jerry

6 6

Mailman 2.1.16 RPMs?
by Robert Heller 14 Jun '14

14 Jun '14

Before I go through the hassle of building it myself I want to know if someone else has built RPMS for Mailman 2.1.16. I *need* to update the version of Mailman on my CentOS 5 server to Mailman 2.1.16 in order to be able to use the from_is_list option to deal with DMARC issues with Yahoo, Aol, and Hotmail. -- Robert Heller -- 978-544-6933 / heller(a)deepsoft.com Deepwoods Software -- http://www.deepsoft.com/ () ascii ribbon campaign -- against html e-mail /\ www.asciiribbon.org -- against proprietary attachments

3 2

Create Virtual Machine via HTTP or FTP
by cbulist＠gmail.com 08 Jun '14

08 Jun '14

Hi, I'm trying to create a Virtual Machine using Network Install mode (I tried HTTP and FTP). The HTTP/FTP server where the installation files are located is the Host Machine. The URL that I'm using is: http://192.168.1.104/inst and the Automatic detect option detects the OS without problem. When the installation starts I got an error: Unable to retrieve http://192.168.1.104/inst/images/install.img I tried different path but I always get the same error. The host machine is a Centos 6.2 (2.6.32.-220.el6.x86_64) I really appreciate any help with this problem. Thanks in advance,

5 7

chromium-34.0.1847.132-4.el6
by ngeorgop 05 Jun '14

05 Jun '14

New EL6 compilation of chromium (34.0.1847.132) (aura) Based on russian fedora build Build with devtools-2 (http://people.centos.org/tru/devtools-2/readme) chromium-34.0.1847.132-4.el6.i686.rpm https://drive.google.com/file/d/0B9RlkKQB1POSM1ByMUNMaWNVYmM/edit?usp=shari… chromium-34.0.1847.132-4.el6.src.rpm https://drive.google.com/file/d/0B9RlkKQB1POSNk05U0tlYU1DR1k/edit?usp=shari… It works with latest flash taken from chrome (non-free) e.g. http://pull-mirror.yandex.net/fedora/russianfedora/russianfedora/nonfree/fe… -- View this message in context: http://centos.1050465.n5.nabble.com/CentOS-chromium-34-0-1847-132-4-el6-tp5… Sent from the CentOS mailing list archive at Nabble.com.

2 1

firefox-29.0-5.1.el6
by ngeorgop 05 Jun '14

05 Jun '14

New compilation of firefox (v. 29.0) build with 1) devtools-2 (http://people.centos.org/tru/devtools-2/readme) 2) python27 (from SCL) (http://ftp.scientificlinux.org/linux/scientific/6.5/i386/external_products/…) 3) icu-last-50.1.2 from remi (http://rpms.famillecollet.com/SRPMS/) firefox-29.0-5.1.el6.i686.rpm https://drive.google.com/uc?id=0B9RlkKQB1POSOXk1OG5KODJNWFk&export=download ibicu-last-50.1.2-10.el6.i686.rpm https://drive.google.com/file/d/0B9RlkKQB1POSNW9YaWxBVWR6UVk/edit Sources: firefox-29.0-5.1.el6.src.rpm https://drive.google.com/file/d/0B9RlkKQB1POSems0VXNIWXVuSjg/edit?usp=shari… icu-last-50.1.2-10.remi.src.rpm https://drive.google.com/file/d/0B9RlkKQB1POSY0RJQTFQWlk0N3M/edit?usp=shari… Waiting for comments ngeorgop -- View this message in context: http://centos.1050465.n5.nabble.com/CentOS-firefox-29-0-5-1-el6-tp5726640.h… Sent from the CentOS mailing list archive at Nabble.com.

3 4

Re: [CentOS] Mother board recommendation
by Joseph Hesse 04 Jun '14

04 Jun '14

On 05/16/2014 10:28 AM, Dave Stevens wrote: > Quoting Joseph Hesse <joehesse(a)gmail.com>: > >> Hello, >> >> I want to build a lightweight server and install centos. Does anyone >> have a recommendation for a suitable motherboard? >> >> Thank you, >> Joe > > there are lots of motherboards that might do; in my experience make > sure it has lots of top end for memory, 32 gigs is not hard to find. > you also need to consider how many cpus cores drives other > peripherals. really it's a large topic. check ebay too, I found a nice > supermicro two cpu opteron board with 8 cores and 16G ram for $250. > > D > >> _______________________________________________ >> CentOS mailing list >> CentOS(a)centos.org >> http://lists.centos.org/mailman/listinfo/centos >> > > > Thank you for your reply. I am currently using, as a server, a workstation computer. It was built with a gigabyte motherboard and has 8G ram and a 1000G Sata 3 drive. It is accessed with ssh and runs an ftp server, a web server and a samba server so my wife can back up her pc to it. It is running behind a router. This computer more than meets my needs as a lightweight server except the hardware is dying and I want to replace it. The question in my mind is: should I just buy another workstation class motherboard and duplicate what I already have or buy a motherboard which is intended to be used as a server? Thank you, Joe

6 12

Centos box and Cisco 3750 VLAN's
by Boris Epstein 03 Jun '14

03 Jun '14

Hello all, I have a CentOS box that has a NIC (eth0) on which I defined 4 VLAN's (counting the NIC itself): eth0, eth0.1, eth0.2 and eht0.3. Initially the Cisco switch was not partitioned into VLAN's which means that the only VLAN running on it was the default one (VLAN 1). I have then played with VLAN's a bit on the switch and at this point have two: VLAN 1 (which is default and can not be deleted) and VLAN 3. The CentOS box is plugged into a trunk port on VLAN 3 which by virtue of being a trunk should belong to all VLANs. However, this does not seem to work as expected. What I get is the following: 1) eht0 does not come up at all. ifup eth0 Device eth0 does not seem to be present, delaying initialization 2) eth0.3 comes up fine. 3) Other VLAN's do not come up. No error messages, just never show up. Any insight into this would be most welcome. Primarily, I fail to understand why all those VLAN's came up on VLAN 1 and why now even VLAN 1 does not come up - even though the trunk port the device is plugged into is supposed to be a member of all VLAN's. Thanks in advance. Boris.

5 7

Mother board recommendation
by Joseph Hesse 03 Jun '14

03 Jun '14

Hello, I want to build a lightweight server and install centos. Does anyone have a recommendation for a suitable motherboard? Thank you, Joe

7 6

Newer version of ffmpeg for EL6?
by Lists 03 Jun '14

03 Jun '14

We're trying to build a rich media website, and will need to re-encode the video content with ffmpeg. Unfortunately, the ffmpeg version that comes with the most common repos are rather out of date. As in 0.6.5 vs 2.21 being the most current version. However, ffmpeg looks to be a pretty thorny thing to compile with all the options we need. It appears that the FFMPEG with rpmfusion for Fedora is pretty current, 2.1.4. Is there a repo out there that anybody knows of that has a relatively current version of ffmpeg out for Centos 6? Thanks in advance, Ben

3 3

Re: [CentOS] clamav
by Filip Bartmann 03 Jun '14

03 Jun '14

On Thu, 29 May 2014 21:53:53 -0700 Emmett Culley <lst_manage(a)webengineer.com> wrote: > Every time I update my system with clamav, it doesn't restart and > freshclam no longer works, because of a permission issue on the log > directory. Each time I update clamav I have to search the Internet > to figure out what there is to do. That NEVER helps so I try > different combinations on user and group in amavis-new and clamav > configuratio files, until I eventually get them both to work. > > I am getting clamav and amavisd update from the epel repo. What can > I do to prevent this from happening? I have same issue, and i have after each update change permissions of /var/log/clamav and /var/lib/clamav to amavis.amavis. Filip Bartmann

7 14

nodejs, epel, SCL
by Eugene Vilensky 02 Jun '14

02 Jun '14

Hello, With SCL and epel repositories enabled, some dependencies for the package name 'nodejs' get satisfied with libs from SCL which are placed in paths that are not part of my user's environment. Is there a method to make sure that nodeJS from epel dependencies are only satisfied from epel? For example, the http parser dependency gets satisfied by nodejs010-http-parser-2.0-5.20121128gitcd01361.el6.centos.alt.x86_6 http-parser-2.0-4.20121128gitcd01361.el6.x86_64 : HTTP request/response parser for C Repo : epel Matched from: Filename : /usr/lib64/libhttp_parser.so.2 Other : libhttp_parser.so.2()(64bit) Filename : /usr/lib64/libhttp_parser.so.2.0 http-parser-2.0-4.20121128gitcd01361.el6.i686 : HTTP request/response parser for C Repo : epel Matched from: Other : libhttp_parser.so.2 Filename : /usr/lib/libhttp_parser.so.2 Filename : /usr/lib/libhttp_parser.so.2.0 nodejs010-http-parser-2.0-5.20121128gitcd01361.el6.centos.alt.x86_64 : HTTP request/response parser for C Repo : scl Matched from: Filename : /opt/rh/nodejs010/root/usr/lib64/libhttp_parser.so.2 Filename : /opt/rh/nodejs010/root/usr/lib64/libhttp_parser.so.2.0 Other : libhttp_parser.so.2()(64bit)

6 14

traffic distribution not happening in centos 6.5
by Varun Sharma 02 Jun '14

02 Jun '14

Hi, I am experimenting with libnetfilter_queue. libnetfilter_queue is a userspace library providing an API to packets that have been queued by the kernel packet filter. I am using sample code(nfqnl_test.c) available on netfilter.org. I have generated two binaries (queue0 and queue1) using that nfqnl_test.c sample code. These binaries are working as per expected behaviour in case of Centos 6.2 but with Centos 6.5 only one queue is receiving network traffic. I am not able to understand why only one queue is receiving network traffic in case of Centos 6.5 whereas same network traffic is being distributed in both the queues with Centos 6.2. uname –a :- Linux hwcentos8 2.6.32-431.el6.x86_64 #1 SMP Fri Nov 22 03:15:09 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Machine Info: 16 core machine with 64GB RAM. Command used for iptables in Centos 6.5 :- iptables -A INPUT -j NFQUEUE --queue-balance 0:1 Output In Centos 6.5 :- [varun@exp2 ~]$ ./queue0 opening library handle unbinding existing nf_queue handler for AF_INET (if any) binding nfnetlink_queue as nf_queue handler for AF_INET binding this socket to queue '0' setting copy_packet mode pkt received queue0 hw_protocol=0x0800 hook=1 id=0 hw_src_addr=fc:4d:d4:d3:7f:73 indev=2 payload_len=40 entering callback pkt received queue0 hw_protocol=0x0800 hook=1 id=1 hw_src_addr=fc:4d:d4:d3:7f:73 indev=2 payload_len=40 entering callback pkt received queue0 hw_protocol=0x0800 hook=1 id=2 hw_src_addr=fc:4d:d4:d3:7f:73 indev=2 payload_len=40 entering callback pkt received queue0 hw_protocol=0x0800 hook=1 id=3 hw_src_addr=fc:4d:d4:f1:e1:5f indev=2 payload_len=78 entering callback [varun@exp2 ~]$ ./queue1 opening library handle unbinding existing nf_queue handler for AF_INET (if any) binding nfnetlink_queue as nf_queue handler for AF_INET binding this socket to queue '1' setting copy_packet mode Please let me know if more information is required. Regards varun

2 2

CentOS 6 KVM networking: What am I missing???
by Robert Heller 01 Jun '14

01 Jun '14

OK, I have a strange problem. It is probably something simple/stupid, but I cannot figure it out. I have a nice new PowerEdge T20 that I installed CentOS 6 (6.5) on with Virtualization (KVM). I then installed Ubuntu 14.04 in a virtual machine, with a bridged network: ------ begin ub140464.xml------------------ <domain type='kvm' id='2'> <name>ub140464</name> <uuid>53f7caec-1ff8-3bcd-3387-781dbc686907</uuid> <memory unit='KiB'>1048576</memory> <currentMemory unit='KiB'>1048576</currentMemory> <vcpu placement='static'>1</vcpu> <os> <type arch='x86_64' machine='rhel6.5.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='block' device='disk'> <driver name='qemu' type='raw' cache='none' io='native'/> <source dev='/dev/vg_newserver00/ub140464'/> <target dev='vda' bus='virtio'/> <alias name='virtio-disk0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> <alias name='ide0-1-0'/> <address type='drive' controller='0' bus='1' target='0' unit='0'/> </disk> <controller type='usb' index='0'> <alias name='usb0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <controller type='ide' index='0'> <alias name='ide0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='network'> <mac address='52:54:00:11:43:29'/> <source network='virbr1'/> <target dev='macvtap0'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5900' autoport='yes' listen='127.0.0.1'> <listen type='address' address='127.0.0.1'/> </graphics> <sound model='ich6'> <alias name='sound0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='cirrus' vram='9216' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='selinux' relabel='yes'> <label>system_u:system_r:svirt_t:s0:c369,c592</label> <imagelabel>system_u:object_r:svirt_image_t:s0:c369,c592</imagelabel> </seclabel> </domain> ------ end ub140464.xml -------------------- ------ begin virbr1.xml --------------------- <network connections='1'> <name>virbr1</name> <uuid>c2621cc7-49d7-a94d-d682-a77a3f1fcbef</uuid> <forward dev='em1' mode='bridge'> <interface dev='em1' connections='1'/> </forward> </network> ------ end virbr1.xml --------------------- The Ububtu VM can connect to the LAN the T20 is on and off into the public Internet. Machines on the LAN (eg my laptop) can connect to Ububtu VM. *BUT* the host server cannot connect to the Ububtu VM and the Ububtu cannot connect to the host server. Netstat -r on the T20 (host server): [root@newserver ~]# netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 * 255.255.255.0 U 0 0 0 em1 192.168.122.0 * 255.255.255.0 U 0 0 0 virbr0 link-local * 255.255.0.0 U 0 0 0 em1 default server1.wendell 0.0.0.0 UG 0 0 0 em1 Netstat -r on the Ubuntu VM: heller@ub140464:~$ netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default server1.wendell 0.0.0.0 UG 0 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 (server1 is the older PowerEdge server running CentOS 5 that *presently* serves as the router to the public Internet and is also the dhcp and DNS server for the LAN. Eventually, the new T20 server will take that over, once it is fully set up.) I have set up VMs like this on my CentOS 5 (Xen) machine without any problems, but I must be missing something here. -- Robert Heller -- 978-544-6933 / heller(a)deepsoft.com Deepwoods Software -- http://www.deepsoft.com/ () ascii ribbon campaign -- against html e-mail /\ www.asciiribbon.org -- against proprietary attachments

4 3

Centos 6.5
by Manjunath N 31 May '14

31 May '14

Hi, I am using centos 6.4. i am trying to update /proc/sys/fs/epoll/max_user_instances but it seems like it is not supported anymore in /etc/sysctl.conf. How do we update max_user_instances on centos 6.4? Thanks & Regards Manjunath

2 1

"new" computers and monitors
by Michael Hennebry 30 May '14

30 May '14

Until recently, I had a 32-bit machine with one monitor running fedora. The later editions of fedora didn't like it, so I switched to CentOS. Now I have two 64-bit machines and two monitors and a CenturyLink router. Also a KVM switch that I have not taken out of the package. My main machine has two video connections and two ethernet connections, eth0 and eth1 . I've never had more than one machine or more than one monitor before. I'd like to be able to use both monitors at once on my main machine. I'd like to be able to switch one monitor between machines without too much trouble. I'd rather not where the pins out. KVM will do this, right? KVM is transparent to the computer, right? My secondary machine sometimes runs Windows, so I'd like it not to have its own global IP address. My first thought would be to connect it directly to one of the ethernet ports on my main machine. How do I go about this? The answer I am expecting is one or more links to tutorials or the like. -- Michael hennebry(a)web.cs.ndsu.NoDak.edu "SCSI is NOT magic. There are *fundamental technical reasons* why it is necessary to sacrifice a young goat to your SCSI chain now and then." -- John Woods

11 26

OEM suggestions
by m.roth＠5-cent.us 30 May '14

30 May '14

Hey, folks, I'm working on finding some new compute nodes. What I'm looking for is a 64 core box, with room enough for a lot of RAM. I can get it from Dell, or HP (bleah! a 4U box), but I need to have three quotes, y'know. We've gotten a lot from Penguin in the past, but they're all Supermicro, and we've had a *lot* of problems with the 64 core boxes, so I'm looking for another vendor. Suggestions? Recommendations? People to run the other way from? (Sun/Oracle is down there *under* "none of the above"). mark

11 37

Tracking Open Ports
by Eric Falbe 30 May '14

30 May '14

Hi All, I was wondering if anyone knew of a way to notify or log when a specific remote port is openened? I have an old LDAP server that I am looking to get rid of, but there is still a few queries reaching it. The sytem authentication is setup correctly (as is Postfix), so I am thinking there must be some script or program that is setup to query the older LDAP server. I tried using lsof -i|grep 389, but I am not quick enough to get results before the socket is closed. Is there any program or script I could write to detect when this socket gets opened, and what PID and/or program owns it? Thanks, Eric Falbe

6 6

CentOS-announce Digest, Vol 111, Issue 15
by centos-announce-request＠centos.org 30 May '14

30 May '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:0569 CentOS 5 gfs2-utils Update (Johnny Hughes) 2. CEBA-2014:0571 CentOS 5 java-1.7.0-openjdk Update (Johnny Hughes) 3. CEBA-2014:0572 CentOS 6 ibus-table FASTTRACK Update (Johnny Hughes) 4. CEBA-2014:0570 CentOS 6 iproute Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 29 May 2014 13:30:00 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0569 CentOS 5 gfs2-utils Update To: centos-announce(a)centos.org Message-ID: <20140529133000.GA504(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0569 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0569.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: df64a4378505afee7a8f09ab4b60136fc5bd0dd31cecdcf6422e341984ea7f64 gfs2-utils-0.1.62-39.el5_10.3.i386.rpm x86_64: 2a1b7cadd39d0e5887c8edd7ac4b61b383da664a149c194f23788877ef2f9553 gfs2-utils-0.1.62-39.el5_10.3.x86_64.rpm Source: 1ba5063d700b93b4f2dca75b1117f2214166b53306b055d6a66fe1e2cbcc5fad gfs2-utils-0.1.62-39.el5_10.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Thu, 29 May 2014 13:46:41 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0571 CentOS 5 java-1.7.0-openjdk Update To: centos-announce(a)centos.org Message-ID: <20140529134641.GA2050(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0571 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0571.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 861a383b7d8c54c1fd174ee50a19094691e67b65dd3e36ee7714e78645857470 java-1.7.0-openjdk-1.7.0.55-2.4.7.2.el5_10.i386.rpm e916d0444c1ac33f4d8a764a91512c3efff34dd9a8531a760a716cb46b600208 java-1.7.0-openjdk-demo-1.7.0.55-2.4.7.2.el5_10.i386.rpm 8d6170a6bafb6ed81cdd2e4f3be0239fd7422c9c204078889871e0257e72683f java-1.7.0-openjdk-devel-1.7.0.55-2.4.7.2.el5_10.i386.rpm 06a543e22f65ff2fbc17af52da3d8000f253be1224469550948ccb3bb1876a6b java-1.7.0-openjdk-javadoc-1.7.0.55-2.4.7.2.el5_10.i386.rpm 96e45ecef7924cd51330160be422baa846dd62840c8ce1e86168c7df2fab19b8 java-1.7.0-openjdk-src-1.7.0.55-2.4.7.2.el5_10.i386.rpm x86_64: 10f6de29a4b295ed000f666ad5bbeeb720f99a74cc39334f1597cd8d1f3c1575 java-1.7.0-openjdk-1.7.0.55-2.4.7.2.el5_10.x86_64.rpm cf62cafa02e44dcfc1b71e4ab2973de3064172c8f4915c4f3d855a8583e8f7ef java-1.7.0-openjdk-demo-1.7.0.55-2.4.7.2.el5_10.x86_64.rpm bebd4ec55f417749220e5b9dc844630e447ec6a310c239c21429e5ba40ba0d2b java-1.7.0-openjdk-devel-1.7.0.55-2.4.7.2.el5_10.x86_64.rpm 12e644beadf558502a2ab34aa2a14dc966dd446632ce21f67afeb1da5b7ae00e java-1.7.0-openjdk-javadoc-1.7.0.55-2.4.7.2.el5_10.x86_64.rpm 9fd537778d5a9f6e23a0744be6449ca924f7860964bd649d240b3ed911d1d1b2 java-1.7.0-openjdk-src-1.7.0.55-2.4.7.2.el5_10.x86_64.rpm Source: 26a0f7bbc3cafe87008a8c1d62dab6b5f201d691c96cb796bccf4055bb8d3728 java-1.7.0-openjdk-1.7.0.55-2.4.7.2.el5_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Thu, 29 May 2014 13:49:07 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0572 CentOS 6 ibus-table FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20140529134907.GA33584(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0572 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0572.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 5632ab3aaad7983670ae5a919c31f3048b3bc0ae60cc0ce4f539e39fc44e02dd ibus-table-1.2.0.20100111-5.el6.noarch.rpm 1750d4a0a45a5aec63f021312f8977581c0f12a30b32b7542293f9b9b4bfc42f ibus-table-additional-1.2.0.20100111-5.el6.noarch.rpm 111a6134d60342b4e3c609a5a77b3b54bd0a764dc2a3c0b87d3e314bb8e632d4 ibus-table-devel-1.2.0.20100111-5.el6.noarch.rpm x86_64: 5632ab3aaad7983670ae5a919c31f3048b3bc0ae60cc0ce4f539e39fc44e02dd ibus-table-1.2.0.20100111-5.el6.noarch.rpm 1750d4a0a45a5aec63f021312f8977581c0f12a30b32b7542293f9b9b4bfc42f ibus-table-additional-1.2.0.20100111-5.el6.noarch.rpm 111a6134d60342b4e3c609a5a77b3b54bd0a764dc2a3c0b87d3e314bb8e632d4 ibus-table-devel-1.2.0.20100111-5.el6.noarch.rpm Source: b46530795ebff85c969b3e2fa38a6a1b64edfffe51c8853bcd9102102f08d272 ibus-table-1.2.0.20100111-5.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Thu, 29 May 2014 13:49:38 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0570 CentOS 6 iproute Update To: centos-announce(a)centos.org Message-ID: <20140529134938.GA33826(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0570 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0570.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 31a7240ff770ddd2f18715bccd1907f290b22468f2fa7d654e912e242cdeafcb iproute-2.6.32-32.el6_5.i686.rpm ab480269824cfbc232e526cc29f5cd8a4a4728121e5dbb906286a8862b34b80d iproute-devel-2.6.32-32.el6_5.i686.rpm ff19d039eb2787620f61cfb8de1bcf621b25132d19e73040513c0ec3545a485a iproute-doc-2.6.32-32.el6_5.i686.rpm x86_64: 79711ce75632a05d5cd2f91bef3a4de1c4567cc01db7b6088e3eb3fbdea2ffc5 iproute-2.6.32-32.el6_5.x86_64.rpm ab480269824cfbc232e526cc29f5cd8a4a4728121e5dbb906286a8862b34b80d iproute-devel-2.6.32-32.el6_5.i686.rpm 339ed6500b7e67c33efdb2bee3353f6978d726cac64cfc91676fe77e2f1ac6b0 iproute-devel-2.6.32-32.el6_5.x86_64.rpm 86440aacab4a29963a92c42114f69780f731878f7eeb4b744e9ecf1d24f4bba7 iproute-doc-2.6.32-32.el6_5.x86_64.rpm Source: e1266658c6b53ec9c6274e2680b91d58a9b9ac9ffb79be073b830ec4fcb4f2de iproute-2.6.32-32.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 111, Issue 15 ************************************************

1 0

clamav
by Emmett Culley 30 May '14

30 May '14

Every time I update my system with clamav, it doesn't restart and freshclam no longer works, because of a permission issue on the log directory. Each time I update clamav I have to search the Internet to figure out what there is to do. That NEVER helps so I try different combinations on user and group in amavis-new and clamav configuratio files, until I eventually get them both to work. I am getting clamav and amavisd update from the epel repo. What can I do to prevent this from happening? Emmett

1 0

my setup
by zep 30 May '14

30 May '14

I'm not sure if this is helpful to anyone else and I can't decide if it's mildly clever or just a stupid pet trick, really. I recently decided to reinstall my work laptop with centos. as part of the install I used an 8g sandisk USB drive; it's roughly the size of a wireless mouse receiver. I put /boot, / and /usr on the USB drive, set encrypted partitions for swap, /home, /opt, /var and put them as well as the boot loader the internal drive. so now the USB drive is quite literally acting like a 'key' for whole laptop. with no drive, the laptop comes up to an error like 'No OS found' or something of the like. anyway, not sure anyone else will find it useful, helpful, interesting or anything else, but I felt like sharing, I guess.

2 1

EFI & grub on a Dell PowerEdge T20...
by Robert Heller 30 May '14

30 May '14

OK, I have installed CentOS 6.5 on this beast using parted to make GPT partitions (royal PIA, but done). The machine has three 500G SATA disks with 4K sector sizes. Partitioned with three partions for each of the main disks: sda1 => FAT32 => /boot/efi sdb1 => FAT32 => (not presently mounted, but will be a backup copy of /boot/efi). sda2, sdb2 => /dev/md0 => ext4 => /boot sda3, sdb3 => /dev/md1 => LVM VG, containing /, /home, swap, soon others sdc1 => will be an ext4 and will hold backups. I went into the BIOS and added a UEFI boot option using sda1: "C:\EFI\redhat\grub.efi", but this boots to the grub shell. Doing a device (hd0) /dev/sd0 root (hd0,1) configfile /grub/grub.conf boots up the machine, but how do I make it possible to boot the machine automagically? -- Robert Heller -- 978-544-6933 / heller(a)deepsoft.com Deepwoods Software -- http://www.deepsoft.com/ () ascii ribbon campaign -- against html e-mail /\ www.asciiribbon.org -- against proprietary attachments

1 0

USB-3.0 on C6.5 ??
by Fred Smith 30 May '14

30 May '14

Just wondering if there are any known issues with USB 3.0 storage devices in Centos 6.5?? I just got one of these: http://www.newegg.com/Product/Product.aspx?Item=N82E16817332028 it does either esata or USB 3.0. My new motherboard (ASUS M5A99X EVO R2.0) supports both, so I've tried both (of course, can't have a feature without at least giving it a whirl! :)). esata seems to work fine, I can copy gigs 'n gigs of data to it using the esata connection. however, with USB3 it works for a bit then something goes wonky... After copying some hundreds of megabytes (and I don't know if it is a consistent number or not) suddenly my C6 box starts reporting write errors. some investigation shows that /dev/sdc (and /dev/sdc1) no longer exist on the system. it takes a reboot to get it back. After which it'll work for a while then the same thing all over again. I've tried a different USB 3.0 cable but it makes no difference. Anyone got ideas on this? thanks! -- ------------------------------------------------------------------------------- Under no circumstances will I ever purchase anything offered to me as the result of an unsolicited e-mail message. Nor will I forward chain letters, petitions, mass mailings, or virus warnings to large numbers of others. This is my contribution to the survival of the online community. --Roger Ebert, December, 1996 ----------------------------- The Boulder Pledge -----------------------------

3 9

CVE-2014-0196 and upgrade of Centos 6
by Alexander Danilov 29 May '14

29 May '14

Hi, I have a question about this vulnerability. Could someone please help me which packages i should upgrade in Centos 6 to fix this vulnerability? I don't want to perform upgrade of whole system with "yum upgrade". -- Best Regards, *Alexander Danilov*

3 5

CentOS-announce Digest, Vol 111, Issue 14
by centos-announce-request＠centos.org 29 May '14

29 May '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2014:0561 Moderate CentOS 6 curl Update (Johnny Hughes) 2. CESA-2014:0560 Moderate CentOS 6 libvirt Update (Johnny Hughes) 3. CEBA-2014:0566 CentOS 6 openmotif Update (Johnny Hughes) 4. CEBA-2014:0567 CentOS 6 389-ds-base Update (Johnny Hughes) 5. CEBA-2014:0568 CentOS 6 audit Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 28 May 2014 12:52:04 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:0561 Moderate CentOS 6 curl Update To: centos-announce(a)centos.org Message-ID: <20140528125204.GA64226(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0561 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0561.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: cf0a982bec1212cc7cbba88aa8329d6ece826ae175c65c1799d614ad326712e5 curl-7.19.7-37.el6_5.3.i686.rpm 4b22a18cdd3771279425911a92adb70522a8e4681e83a04fb567b4aa1a469092 libcurl-7.19.7-37.el6_5.3.i686.rpm 018b0b132b567b023fe4a2f7c0fff5b2dac63fdcf9b0e0705f462112aaa447be libcurl-devel-7.19.7-37.el6_5.3.i686.rpm x86_64: 14dacdf46e20d59a866ac6e16a85ad4e7ede330fbe1a3585f52e10b92e18b008 curl-7.19.7-37.el6_5.3.x86_64.rpm 4b22a18cdd3771279425911a92adb70522a8e4681e83a04fb567b4aa1a469092 libcurl-7.19.7-37.el6_5.3.i686.rpm a74646407f46e6b4871259cafcb527047d3f6744aa87e5c3c86c08da43d40543 libcurl-7.19.7-37.el6_5.3.x86_64.rpm 018b0b132b567b023fe4a2f7c0fff5b2dac63fdcf9b0e0705f462112aaa447be libcurl-devel-7.19.7-37.el6_5.3.i686.rpm 374c58267fec287d1a3e38a90a917bc227684ae7287cd5c137104caa972fffed libcurl-devel-7.19.7-37.el6_5.3.x86_64.rpm Source: 0beb826caead2e6b1d3993e5c9d600dc68d2be83e6558b6b702264ab3cb6732c curl-7.19.7-37.el6_5.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 28 May 2014 12:52:42 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:0560 Moderate CentOS 6 libvirt Update To: centos-announce(a)centos.org Message-ID: <20140528125242.GA64525(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0560 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0560.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 84cfe90ef37aafdf8eb8ab3ddf97d0dc0a7e7b9dc20b01a7a6345535c3cad376 libvirt-0.10.2-29.el6_5.8.i686.rpm 306f9bca74029238d789b9fe89b7968d8e27ff72444934d7da27314632d1c2ad libvirt-client-0.10.2-29.el6_5.8.i686.rpm 7deb83f2aa89174889e62aa42ed1567fab957125ed7df7d52518cdaa548e624d libvirt-devel-0.10.2-29.el6_5.8.i686.rpm 68bd6f4bea37aafb6e28f735d49c85b90fa32941ced0dd54b063beb6fbe13a74 libvirt-python-0.10.2-29.el6_5.8.i686.rpm x86_64: f28270885ba213e62c0b19b6d2beabee2d41a75b4453c981018de08f1d504462 libvirt-0.10.2-29.el6_5.8.x86_64.rpm 306f9bca74029238d789b9fe89b7968d8e27ff72444934d7da27314632d1c2ad libvirt-client-0.10.2-29.el6_5.8.i686.rpm 1f2803fe606c0a0ac145f8adc18e3c41a294bac68cba1cadee727854d490e645 libvirt-client-0.10.2-29.el6_5.8.x86_64.rpm 7deb83f2aa89174889e62aa42ed1567fab957125ed7df7d52518cdaa548e624d libvirt-devel-0.10.2-29.el6_5.8.i686.rpm ab0c58d8d5800503ae4fffa70f058f0bc3b810e6845d573be4fb7bf8af7fa56c libvirt-devel-0.10.2-29.el6_5.8.x86_64.rpm 539331c3d592a0a6b833ea75403805254f0857ad86b75ec8860a3cafec981a99 libvirt-lock-sanlock-0.10.2-29.el6_5.8.x86_64.rpm 2b3826383b429dc31ad4552e70e839776a46ca2991dbb30018ef60dff828ebca libvirt-python-0.10.2-29.el6_5.8.x86_64.rpm Source: f5a8961960021783ab329d7970acfc183c4fefd1315e2b81353c8cc3581b17d8 libvirt-0.10.2-29.el6_5.8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 28 May 2014 12:53:14 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0566 CentOS 6 openmotif Update To: centos-announce(a)centos.org Message-ID: <20140528125314.GA64749(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0566 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0566.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 334b54f70b8c3b7a604383bb7ef31c27e6c4a98ecfbf0a0e245777cf6595ff99 openmotif-2.3.3-7.1.el6_5.i686.rpm 5f3382879a12a701b1ec912abcd948fb4c9cacc041ecde64da860ffd81d5c274 openmotif-devel-2.3.3-7.1.el6_5.i686.rpm x86_64: 334b54f70b8c3b7a604383bb7ef31c27e6c4a98ecfbf0a0e245777cf6595ff99 openmotif-2.3.3-7.1.el6_5.i686.rpm b93605d9709b00145f1c1838d50fd85e1a91c5a61fcdcd0d334fa7d381c23aae openmotif-2.3.3-7.1.el6_5.x86_64.rpm 5f3382879a12a701b1ec912abcd948fb4c9cacc041ecde64da860ffd81d5c274 openmotif-devel-2.3.3-7.1.el6_5.i686.rpm 1404413c153751f9180ac81d8369f0017ed2bf6d689593a02f9ae0dfbf357bbd openmotif-devel-2.3.3-7.1.el6_5.x86_64.rpm Source: 48ebb0b640f18fbd561aacb05eb6ce170d988c17b712feadc28093dff0c333b1 openmotif-2.3.3-7.1.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Wed, 28 May 2014 12:53:46 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0567 CentOS 6 389-ds-base Update To: centos-announce(a)centos.org Message-ID: <20140528125346.GA65000(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0567 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0567.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e8da24c96de6e356c8dbc57f5a0159d1c89ea6aa76ea18ebca42301450e69049 389-ds-base-1.2.11.15-33.el6_5.i686.rpm afb571c5781358d6dcfb646a2e7f79a66930422da6c9d5b3a2021223d9be6c96 389-ds-base-devel-1.2.11.15-33.el6_5.i686.rpm 6ff856d3ec8ba40834ed4220922edb98c98b5d443ce9746870ca0784be807623 389-ds-base-libs-1.2.11.15-33.el6_5.i686.rpm x86_64: 37dafe5632e71f68a5140bab74454172115b9abb411c97670f6464a9badb8df1 389-ds-base-1.2.11.15-33.el6_5.x86_64.rpm afb571c5781358d6dcfb646a2e7f79a66930422da6c9d5b3a2021223d9be6c96 389-ds-base-devel-1.2.11.15-33.el6_5.i686.rpm 00450fc51955103db8def4a17e7a532690122f205d731451ce2e576a5db53407 389-ds-base-devel-1.2.11.15-33.el6_5.x86_64.rpm 6ff856d3ec8ba40834ed4220922edb98c98b5d443ce9746870ca0784be807623 389-ds-base-libs-1.2.11.15-33.el6_5.i686.rpm 146b10a31f884f31b9cfa9db7cf2d7f28a5255520a6befc32d7e79959474db26 389-ds-base-libs-1.2.11.15-33.el6_5.x86_64.rpm Source: 550a8298a28229e990bdcadb712e4bbdf29ec40b77cf0dae57dfc79674e4d982 389-ds-base-1.2.11.15-33.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Wed, 28 May 2014 17:32:51 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0568 CentOS 6 audit Update To: centos-announce(a)centos.org Message-ID: <20140528173251.GA11347(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0568 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0568.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 93ab2ebd62dcdbe9e5f8a065fb35512031a326e59677b9c2661b73c64f2fd53d audispd-plugins-2.2-4.el6_5.i686.rpm ef43d75cfd93d3476f5974376ab00c07c9bf6c4a70912b001e0fac40f3f13429 audit-2.2-4.el6_5.i686.rpm 19dd52e6aa8dd48f10050de569596e5be43328767331cbdeeb9bbf0b1695cde8 audit-libs-2.2-4.el6_5.i686.rpm 110e00faee32c97a3b01d03ed0d594559725e38ef33c36760385998fa3e660af audit-libs-devel-2.2-4.el6_5.i686.rpm 71953753cefb5c6fb39f9eaa721f4457a11c63c7e319f976e286249d7c5e9777 audit-libs-python-2.2-4.el6_5.i686.rpm 83a621c0d53af1325c2a65fdaec214a88a0f08c7a94639671a32ab6ba96d8fcb audit-libs-static-2.2-4.el6_5.i686.rpm x86_64: ddc52e17090cd5336441c5a02c637559fb831b289f2cca2b290a07b3e4befff6 audispd-plugins-2.2-4.el6_5.x86_64.rpm 9502c91af5406fb00a6b8ba46bcf63490cd08b6fba6bf25a56048b725c414b9b audit-2.2-4.el6_5.x86_64.rpm 19dd52e6aa8dd48f10050de569596e5be43328767331cbdeeb9bbf0b1695cde8 audit-libs-2.2-4.el6_5.i686.rpm dcd9683e24eab8f6a08a22216bd5d6135283530352d52d54660d039ff0aa6125 audit-libs-2.2-4.el6_5.x86_64.rpm 110e00faee32c97a3b01d03ed0d594559725e38ef33c36760385998fa3e660af audit-libs-devel-2.2-4.el6_5.i686.rpm 15831f1d23022d871ac6f4f660156ac20daa9ad5329bd46401aa3e44185bc605 audit-libs-devel-2.2-4.el6_5.x86_64.rpm 5dc33dc151e6d5b07748e4d7b903a0d74958c03c738cdd46b578b4b4c062dab1 audit-libs-python-2.2-4.el6_5.x86_64.rpm 68ab0c6bf262f9995d67595dd3e4ee1489d79fe70d9c7e694782380fd2c7babb audit-libs-static-2.2-4.el6_5.x86_64.rpm Source: c3b8e1717c809d2ee530b2589b347f076fe8967c9404c9a450713006d847f0d3 audit-2.2-4.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 111, Issue 14 ************************************************

1 0

files automatically changing permissionssdsds
by Tim Dunphy 29 May '14

29 May '14

hello, I'm running apache 2.2.24 and php 5.2.17. The web site that it's service turns into a 403 Forbidden error every 5 minutes literally. I've found that doing a chmod -Rv 775 on the web root restores the site. However this is a band-aid and no real solution. I've combed through all the cron jobs in /var/spool/cron both on this machine and the one it was recently transferred from. And I can find absolutely NO evidence of any rsync jobs or chowns or anything similar that could be affecting that directory. What I need to do is to figure out how to determine what exactly is changing the permissions on that directory's files so that I can put an end to it. Right now I have a chown -Rv 775 running on the directory every 5 minutes. But that is just going to contribute to load and can't be a permanent solution. The directory in question is on an NFS share. However I am unsure of that being the cause. I'm afraid that I am at a loss for troubleshooting steps here. Can someone please help me find some ways to track this down and put an end to this? Thanks Tim -- GPG me!! gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B

4 5

Centos/RHEL 64bit and ARM questions
by Robert Moskowitz 28 May '14

28 May '14

I am digging a bit into RHEL 7 roadmap info. It seems there are statements that RHEL 7 will only support 64 bit. Is this corrent, and what for Centos 7? Also the ARM info I found was the target is ARMv8 which is 64 bit, not the ARMv7 which is 32bit. Any clearification is appreciated.

4 9

The state of xfs on CentOS 6?
by m.roth＠5-cent.us 28 May '14

28 May '14

We're looking at getting an HBR (that's a technical term, honkin' big RAID). What I'm considering is, rather than chopping it up into 14TB or 16TB filesystems, of using xfs for really big filesystems. The question that's come up is: what's the state of xfs on CentOS6? I've seen a number of older threads seeing problems with it - has that mostly been resolved? How does it work if we have some *huge* files, and lots and lots of smaller files? mark

4 7

bash script reading directory with while and do
by Paolo De Michele 28 May '14

28 May '14

hi everyone, I'm searching to do a functionally bash script for copy many file inside in a directory the scenario is: root path= /var/www/clients/ inside of this there are many subdirectories with this name: client1 to x (depends of the customer) it happens that a customer not renew the contract and I would stopping to do a backup directory for him. this operation should be versatile and very easy so, I don't understand the error in this script. look below: !/bin/bash while read line; do read NR PATH NAME<<<$(IFS=" "; echo $line) cd /var/www/clients/ cp -R $PATH /backup/temp/www/ cd /backup/temp/www/ tar cfz `date +%F`_$NAME.tar.gz web$NR/ mv *.tar.gz /backup/www/test/ rm -rf /backup/temp/www/* done < sites.txt anyone can help me, please? thanks in advance regards

7 12

/etc/bash_completion.d/git generates permissions errors
by James B. Byrne 28 May '14

28 May '14

I did a yum update to my desktop machine as root this morning and now my regular logon account sees this whenever I press the enter key: etc/audisp/audispd.conf: Permission denied etc/audisp/plugins.d/af_unix.conf: Permission denied etc/audisp/plugins.d/syslog.conf: Permission denied etc/audit/audit.rules: Permission denied etc/audit/auditd.conf: Permission deniedetc/dhcp/dhclient.d/ntp.sh: Permission denied etc/libvirt/libvirt.conf: Permission denied etc/libvirt/libvirtd.conf: Permission denied etc/libvirt/lxc.conf: Permission denied etc/libvirt/nwfilter/allow-arp.xml: Permission denied etc/libvirt/nwfilter/allow-dhcp-server.xml: Permission denied etc/libvirt/nwfilter/allow-dhcp.xml: Permission denied etc/libvirt/nwfilter/allow-incoming-ipv4.xml: Permission denied etc/libvirt/nwfilter/allow-ipv4.xml: Permission denied etc/libvirt/nwfilter/clean-traffic.xml: Permission denied . . . etc/lvm/backup/vg_vhost04: Permission denied etc/lvm/backup/vg_xnet241: Permission denied etc/lvm/backup/vg_xnet242: Permission denied etc/lvm/backup/vg_xnet243: Permission denied etc/ntp/crypto/pw: Permission denied etc/selinux/targeted/modules/active/base.pp: Permission denied etc/selinux/targeted/modules/active/commit_num: Permission denied etc/selinux/targeted/modules/active/file_contexts: Permission denied etc/selinux/targeted/modules/active/file_contexts.homedirs: Permission denied etc/selinux/targeted/modules/active/file_contexts.local: Permission denied etc/selinux/targeted/modules/active/file_contexts.template: Permission denied . . . root/iaxmodem-debuginfo-1.2.0-1.el6.x86_64.rpm: Permission denied root/ifcfg-br0: Permission denied root/ifcfg-br1: Permission denied root/ifcfg-eth0: Permission denied root/ifcfg-eth0:xxx: Permission denied root/ifcfg-eth1: Permission denied root/install.log: Permission denied root/install.log.syslog: Permission denied root/internal_call.trace: Permission denied root/iptables.gateway.revised: Permission denied root/iptables.gway01.20130517: Permission denied root/iptables.inet09-2012-12-31: Permission denied root/jcameron-key.asc: Permission denied root/locale_en_CA(a)yyyy-mmm-dd.tar.gz: Permission denied root/more_or_less_commands.txt: Permission denied root/named.conf.bind-9.8.2-default-2013-07-04: Permission denied root/named.conf.inet01-dns01-2013-07-04: Permission denied root/named.conf.inet03-dnm-2013-07-04: Permission denied root/pg_hba.conf: Permission denied root/pg_ident.conf: Permission denied root/pgadmin.log: Permission denied root/pgdg-91-centos.repo: Permission denied root/ping_host.sh: Permission denied root/ping_http.sh: Permission denied root/postgresql.conf: Permission denied root/root_voinet09.tgz: Permission denied root/rsync_control.tgz: Permission denied root/rsync_inet01.sh: Permission denied root/rsync_inet02.sh: Permission denied root/rsync_inet03.sh: Permission denied root/rsync_inet04.sh: Permission denied root/rsync_inet05.sh: Permission denied root/rsync_inet06.sh: Permission denied root/rsync_inet07.sh: Permission denied root/rsync_inet08.sh: Permission denied root/rsync_inet09.sh: Permission denied root/rsync_voinet09_freepbx.sh: Permission denied root/rsync_xnet241_home_byrnejb.sh: Permission denied root/ttyS0.conf: Permission denied root/vimsetup.tgz: Permission denied root/virtinstallscript: Permission denied root/voinet01_pki.tgz: Permission denied root/xTuple-3.8.2-linux-installer.run: Permission denied I traced this back to this statement in ~/.bash_profile source /etc/bash_completion.d/git Removing this statement allows new terminal sessions for my regular account to work as they did before - in other words without the massive list of permissions errors. This file comes from the git package in base: $ yum provides /etc/bash_completion.d/git . . . 129 packages excluded due to repository priority protections git-1.7.1-3.el6_4.1.x86_64 : Fast Version Control System Repo : base Matched from: Filename : /etc/bash_completion.d/git My question is: what is in /etc/bash_completion.d/git that is causing this? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 2

CentOS-announce Digest, Vol 111, Issue 13
by centos-announce-request＠centos.org 28 May '14

28 May '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:0539 CentOS 6 akonadi FASTTRACK Update (Johnny Hughes) 2. CEBA-2014:0538 CentOS 6 xguest FASTTRACK Update (Johnny Hughes) 3. CEBA-2014:0540 CentOS 6 sgml-common FASTTRACK Update (Johnny Hughes) 4. CEBA-2014:0555 CentOS 6 shared-mime-info FASTTRACK Update (Johnny Hughes) 5. CEBA-2014:0554 CentOS 6 fontconfig FASTTRACK Update (Johnny Hughes) 6. CEBA-2014:0543 CentOS 6 glibc Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 27 May 2014 11:45:55 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0539 CentOS 6 akonadi FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20140527114555.GA30690(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0539 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0539.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: d6020e4949ddbfa76f2513216a6acc4d8105923a77343ce635b2bf3795bd7f3b akonadi-1.2.1-3.el6.i686.rpm 0ba9fd6d811b1e30d9c7bcc5885c263699e996008b4dc2185e8480f5bff74c71 akonadi-devel-1.2.1-3.el6.i686.rpm x86_64: d6020e4949ddbfa76f2513216a6acc4d8105923a77343ce635b2bf3795bd7f3b akonadi-1.2.1-3.el6.i686.rpm 7db832f132bcc6311167d5d40774851be76401ab3e442ebe506ceedc1fae0a84 akonadi-1.2.1-3.el6.x86_64.rpm 0ba9fd6d811b1e30d9c7bcc5885c263699e996008b4dc2185e8480f5bff74c71 akonadi-devel-1.2.1-3.el6.i686.rpm b5e4afe64c88d50171843b98815039646e3a6d21829ea9c7684639c1e99d0a5c akonadi-devel-1.2.1-3.el6.x86_64.rpm Source: 6029f3e58233b1a09b14273a13d11d1036152fc11fb472ac59d7237c794afaae akonadi-1.2.1-3.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 27 May 2014 11:46:30 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0538 CentOS 6 xguest FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20140527114630.GA30883(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0538 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0538.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: d7f13dd36d43ac5779c905131d1801e6500f94a970ae775c8aae62d981feae4b xguest-1.0.9-5.el6.noarch.rpm x86_64: d7f13dd36d43ac5779c905131d1801e6500f94a970ae775c8aae62d981feae4b xguest-1.0.9-5.el6.noarch.rpm Source: a0f443f88cf2aaf04e9134881fc2a79a92a17b05507702ecd9b4f6850f3008c2 xguest-1.0.9-5.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 27 May 2014 11:47:15 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0540 CentOS 6 sgml-common FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20140527114715.GA31095(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0540 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0540.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6107dbc2ecc841048ae183d9fe610c303f21190ceed55a6f477339b65fd85cbf sgml-common-0.6.3-33.el6.noarch.rpm 2f735793dc38cc9f14966fd5f119ae0c50b069c544d95ad62c07e90654662432 xml-common-0.6.3-33.el6.noarch.rpm x86_64: 6107dbc2ecc841048ae183d9fe610c303f21190ceed55a6f477339b65fd85cbf sgml-common-0.6.3-33.el6.noarch.rpm 2f735793dc38cc9f14966fd5f119ae0c50b069c544d95ad62c07e90654662432 xml-common-0.6.3-33.el6.noarch.rpm Source: 7424491cd81e0a2103e27f069284e32ba79d0bcff97cb456b0b65bec5e23c01e sgml-common-0.6.3-33.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Tue, 27 May 2014 11:48:17 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0555 CentOS 6 shared-mime-info FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20140527114817.GA31284(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0555 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0555.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 2d793e4365531d7a60789ebd56d169548fa2a9924d04d7afa392c75209b400bf shared-mime-info-0.70-6.el6.i686.rpm x86_64: e65f8236fd178a74a174d2659baeb27133ced99ee5cb5e827adef3d641ac0697 shared-mime-info-0.70-6.el6.x86_64.rpm Source: f4d93e884c18a6d23cd9a30c62639e47a05090293f4a41be0b5bd8dd3054d6f2 shared-mime-info-0.70-6.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Tue, 27 May 2014 11:49:07 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0554 CentOS 6 fontconfig FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20140527114907.GA31518(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0554 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0554.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 09cee79c086775d03e0219dc92d82f2803d6936bfe44f0c71f4ff7c33918d4f8 fontconfig-2.8.0-5.el6.i686.rpm 6019c636a5b93f9f11ff91289dadea1922eeeafc59d9ed6645f6019a3b8730e3 fontconfig-devel-2.8.0-5.el6.i686.rpm x86_64: 09cee79c086775d03e0219dc92d82f2803d6936bfe44f0c71f4ff7c33918d4f8 fontconfig-2.8.0-5.el6.i686.rpm 6a915b6e1ad740994aa9688d70a67ff2b6b72e0ced668794aeb27b2d0f2e237b fontconfig-2.8.0-5.el6.x86_64.rpm 6019c636a5b93f9f11ff91289dadea1922eeeafc59d9ed6645f6019a3b8730e3 fontconfig-devel-2.8.0-5.el6.i686.rpm 4938701d283915837478b414dcf365592e1581052fcf5c89f9d89f2aea9e5361 fontconfig-devel-2.8.0-5.el6.x86_64.rpm Source: 8a737297dbb39f12c67f88db1b21b37ef97bed2ca00fa0975b16e264d6953a33 fontconfig-2.8.0-5.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Tue, 27 May 2014 11:50:16 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0543 CentOS 6 glibc Update To: centos-announce(a)centos.org Message-ID: <20140527115016.GA31887(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0543 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0543.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 646353d24e7b98a82728147d03501703a922b1c4aa3e10e1ec2a80612a997895 glibc-2.12-1.132.el6_5.2.i686.rpm a3fd211ee6f6919bcd47151c2928a126619fd3a140b2c62f1f219681663169f6 glibc-common-2.12-1.132.el6_5.2.i686.rpm 98ddfca5350f05caefe915dddea0affbd75f1c7322d2a0e13a7c6528680fd56c glibc-devel-2.12-1.132.el6_5.2.i686.rpm 95d1a2a050f462b00df20ebe98c5f027d5b78fb3f1563e4c9caa57f5ee8ab634 glibc-headers-2.12-1.132.el6_5.2.i686.rpm b461b6d54062b8321e2e980157e49bec3e83d76a4d37aa715d636fcf5b022e9b glibc-static-2.12-1.132.el6_5.2.i686.rpm c97079fae6c7ba9a6749243e0872485ef80f96bc783b98b6041e4bcc9a6e39d8 glibc-utils-2.12-1.132.el6_5.2.i686.rpm df8d8397944ff32733e95ecab9e0e866f75e6826cb02e80ed1b717d5dbc3c910 nscd-2.12-1.132.el6_5.2.i686.rpm x86_64: 646353d24e7b98a82728147d03501703a922b1c4aa3e10e1ec2a80612a997895 glibc-2.12-1.132.el6_5.2.i686.rpm 649fbe5cb00873b827f903f67d1110695c429a6333b71d17ace0cd65e7d57fa7 glibc-2.12-1.132.el6_5.2.x86_64.rpm 1b71ef8b7138b126fb226195ac82031f3605c63ba662368c647230ae6babd28e glibc-common-2.12-1.132.el6_5.2.x86_64.rpm 98ddfca5350f05caefe915dddea0affbd75f1c7322d2a0e13a7c6528680fd56c glibc-devel-2.12-1.132.el6_5.2.i686.rpm 93cdbd31e4a3d926fa3e43a9b04171ca0b07bd544f5b663417d2620c8e558a10 glibc-devel-2.12-1.132.el6_5.2.x86_64.rpm 752daa034bf639acae2584064da3d1380058a5b4622f0899b1a6be3ef3acc6b9 glibc-headers-2.12-1.132.el6_5.2.x86_64.rpm b461b6d54062b8321e2e980157e49bec3e83d76a4d37aa715d636fcf5b022e9b glibc-static-2.12-1.132.el6_5.2.i686.rpm 9cb559c8888834a235150389c006cf757892986958ca594952ed8c0c9fcc2143 glibc-static-2.12-1.132.el6_5.2.x86_64.rpm 9e72a435a0067d6a824569ecb0a02356599e00a50f68a3206bcefd4308cfd7b0 glibc-utils-2.12-1.132.el6_5.2.x86_64.rpm ce233677bc97d43e59f3fd6fedc704cbcdd9053dd3bda4e16d5fe9aa68c67c07 nscd-2.12-1.132.el6_5.2.x86_64.rpm Source: 7d9744402371ac36bde39c84f62c8b5bc5509c64f1cc419018fc00d54b18d5ae glibc-2.12-1.132.el6_5.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 111, Issue 13 ************************************************

1 0

Enlightenment and CentOS 6.5
by Jeff Layton 28 May '14

28 May '14

Good morning, I've been looking around for binaries for Enlightenment (>= 0.17) for CentOS 6.5. I've found something called "elementary" from OpenSUSE but I'm not sure what Elementary really is :) Any suggestions? Thanks! Jeff

2 2

freebsd hangs when install on centos6.5
by Jarod. w 28 May '14

28 May '14

Hi, All The freebsd(version: 10.0, RC3) can't be installed as kvm guest based on CentOS 6.5(kernel: kernel-2.6.32-431.17.1.el6.x86_64, qemu-kvm: qemu-kvm-0.12.1.2 -2.415.el6_5.8.x86_64). When installing it, it always shows 'booting' and hangs. My cpu&memory information: CPU: Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz Mem: 132189664 My qemu-kvm command: /usr/libexec/qemu-kvm -name testbsd -M rhel6.5.0 -enable-kvm -m 2048 -realtime mlock=off -smp 4,sockets=4,cores=1,threads=1 -uuid 7f68743b-d725-4c7d-dc7e-9aa6712584b3 -drive file=/home/vAPV/test.img,if=none,id=drive-ide0-0-0,format=qcow2,cache=none -vnc 0.0.0.0:0 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 --cdrom /home/downloads/FreeBSD-10.0-RC3-amd64-dvd1.iso Any suggestions? Thanks in advance.. -- --- Best Regards Jarod.W

3 6

Regex Kiki
by Chris 27 May '14

27 May '14

Dear All, is there a kiki [1] package for CentOS? [1] https://code.google.com/p/kiki-re/ -- Christian

1 0

kvm and 6.5
by John R Pierce 27 May '14

27 May '14

I'm trying to create a 6.5 VM on a 6.5 system using virt-install... # virt-install --network bridge:br0 --name kfat --ram=2048 --vcpus=2 --disk path=/var/lib/libvirt/images/kfat.img,size= 16 --cdrom=/home/downloads/CentOS-6.5-x86_64-minimal.iso I get through the first part of the installation, asks for disk layout (I leave default, tell it to take the whole vdisk), networking (I setup a static IP), then bombs with an error that it can't mount / not sure what to do next. -- john r pierce 37N 122W somewhere on the middle of the left coast

2 5

CentOS-6.5 rescue disk?
by Timothy Murphy 26 May '14

26 May '14

Is there such a thing as a CentOS rescue disk? Google gives many links to such a thing, but when I pursue them I do not get to an URL where I can actually download one. -- Timothy Murphy e-mail: gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin 2, Ireland

4 5

Newer version of FfMpeg
by Lists 26 May '14

26 May '14

We're trying to build a rich media website, and will need to re-encode the video content with ffmpeg. Unfortunately, the ffmpeg version that comes with the most common repos are rather out of date. As in 0.6.5 vs 2.21 being the most current version. However, ffmpeg looks to be a pretty thorny thing to compile with all the options we need. It appears that the FFMPEG with rpmfusion for Fedora is pretty current, 2.1.4. Is there a repo out there that anybody knows of that has a relatively current version of ffmpeg out for Centos 6? Thanks in advance, Ben

3 2

Re: [CentOS] Disabling IRQ 16
by Alessandro Baggi 26 May '14

26 May '14

Hi Reindl, thanks for the answer. I've tried to make some hardware changes. I've ridden my mobo irq configuration from manual, and changed vga card and nic modo allocation. The problem persist, but now I get for IRQ 19. What's that cause (a condition, an error...) IRQ disabling? Thanks in advance. Il 19/05/2014 15:24, Reindl Harald ha scritto: > > Am 19.05.2014 15:20, schrieb Alessandro Baggi: >> Hi list, >> I've a problem with my system on CentOS 6.5 x86_64 on a workstation. >> >> During utilizzation, after several hours after boot (6/7 hours) I get an >> error: >> >> Disabling IRQ #16 > > that is a well known problem > > https://bugzilla.redhat.com/show_bug.cgi?id=1013054 > https://www.google.at/search?q=+irq+16%3A+nobody+cared >

1 0

xfs and user quota
by Götz Reinicke - IT Koordinator 25 May '14

25 May '14

Hi, I try to enable userquota an a new xfs filesystem. Its centos 6.5, the filesystem is mounted with usrquota, the server was rebooted. I thought xfs_quota -x -c 'limit bsoft=20000m bhard=22000m username' /home would set the quota for that user. But I do get an error: Command limit not found. Did I miss something? Any hints/how to beside the official sgi xfs and redhat doc would be nice. Regards . Götz -- Götz Reinicke IT-Koordinator Tel. +49 7141 969 82 420 E-Mail goetz.reinicke(a)filmakademie.de Filmakademie Baden-Württemberg GmbH Akademiehof 10 71638 Ludwigsburg www.filmakademie.de Eintragung Amtsgericht Stuttgart HRB 205016 Vorsitzender des Aufsichtsrats: Jürgen Walter MdL Staatssekretär im Ministerium für Wissenschaft, Forschung und Kunst Baden-Württemberg Geschäftsführer: Prof. Thomas Schadt

2 2

LG 34UM95 monitor
by Frank Cox 24 May '14

24 May '14

I was just reading about the new LG 34UM95 monitor and got to wondering what it would take to make something like that work with a Centos machine. Would any particular video card or drivers required? I don't know much about video past pluging in the video cable, switching 'er on and see the pretty pictures. -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com

2 1

add time to log file for cron job
by Tim Dunphy 24 May '14

24 May '14

Hey all, I'm trying to figure out a way to insert a timestamp into a log file I'm creating for a cron job I'm setting up: /usr/bin/rsync -v --min-size=1 -rlpgo -O --inplace /home/myuser/Get* root@xx.x.xx.xx:/mnt/bravotv/media/compass 2>&1 >& /tmp/rsync_user.log I've googled this but all I could find are tips on how to add the time and date to the name of the log file itself, not to the contents of the log. Any tips or pointers would be great. Thanks Tim -- GPG me!! gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B

2 2

CentOS 6 Manuals
by Mark LaPierre 23 May '14

23 May '14

Hey all, I just went looking for some manuals for a friend of mine who is new to Linux. I installed CentOS 6.5 on his machine. The CentOS.org web site has documentation up to CentOS 5. Where can I look to find the manuals for CentOS 6? -- _ °v° /(_)\ ^ ^ Mark LaPierre Registered Linux user No #267004 https://linuxcounter.net/ ****

6 7

CentOS-announce Digest, Vol 111, Issue 12
by centos-announce-request＠centos.org 23 May '14

23 May '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:0533 CentOS 6 mksh FASTTRACK Update (Johnny Hughes) 2. CEBA-2014:0534 CentOS 6 perl-Class-MethodMaker FASTTRACK Update (Johnny Hughes) 3. CEBA-2014:0535 CentOS 6 netlabel_tools FASTTRACK Update (Johnny Hughes) 4. CESA-2014:0536 Moderate CentOS 5 mysql55-mysql Update (Johnny Hughes) 5. CESA-2014:0537 Moderate: mysql55-mysql SCL Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 22 May 2014 13:53:40 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0533 CentOS 6 mksh FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20140522135340.GA7208(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0533 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0533.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: edf841f0529fbaec0ae2fb797d89ba0477480cf2c054153f92e4a4db65a14fa9 mksh-39-9.el6.i686.rpm x86_64: d5dbcf66027fdfcc12e940640168a95a2357c14a7a55040442c37301e6622d6c mksh-39-9.el6.x86_64.rpm Source: eed41137532ad66ebb3d96bcd9d99e9a887eff8f1642b51fff17ccbe22a6aba5 mksh-39-9.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Thu, 22 May 2014 13:54:33 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0534 CentOS 6 perl-Class-MethodMaker FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20140522135433.GA7401(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0534 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0534.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 941953eb964380cc73edb60fa10c9fcfb4a066dcf73b8e6d72325b625fdfef31 perl-Class-MethodMaker-2.16-6.el6.i686.rpm x86_64: 5f2262da14443eab5be22e9b6fa91dadb336ff578dffe4dff1c146523eb9e1ab perl-Class-MethodMaker-2.16-6.el6.x86_64.rpm Source: 2aba1a1893b7b37ab510fcf3e7f7688ed35f98a60b69830aab606837d35904b9 perl-Class-MethodMaker-2.16-6.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Thu, 22 May 2014 14:09:50 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0535 CentOS 6 netlabel_tools FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20140522140950.GA9387(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0535 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0535.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1f4fb6892be41627d0bf50425bcb0548190d4ea061d90be96f760b2d8b98c350 netlabel_tools-0.19-11.el6.i686.rpm x86_64: b440256e3fba1d50b695f9afe2da763a6c59109fd3722398648b17ca4c677c45 netlabel_tools-0.19-11.el6.x86_64.rpm Source: 9255778a51b51697590f5e6e1ef9e3b6d7f7610e9ab22fee831a3f49fcc3159b netlabel_tools-0.19-11.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Thu, 22 May 2014 23:08:29 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:0536 Moderate CentOS 5 mysql55-mysql Update To: centos-announce(a)centos.org Message-ID: <20140522230829.GA31236(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0536 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0536.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: bad9b939c38220b35f687b0e511b592d5c929e5ff4f5e0816dacbc3df6d5e3a8 mysql55-mysql-5.5.37-1.el5.i386.rpm 6bb67177de1254c3c6ea51ff1bd312906592344b6a1dd96b99655751b40436b6 mysql55-mysql-bench-5.5.37-1.el5.i386.rpm 22df2756d2b7437358b49540c695270ef835a21ec475093e2f31d4af78bede06 mysql55-mysql-devel-5.5.37-1.el5.i386.rpm 23609232eb1cfb8ea965f54e03ff0b6d3d93b851553eee89afaf16054a2a303a mysql55-mysql-libs-5.5.37-1.el5.i386.rpm 0a07a8e3bd9203017feeb9978186e76fb0dfddd44b228955d31650765ee1de7e mysql55-mysql-server-5.5.37-1.el5.i386.rpm c717a6945ee6491346d8c601a58279e264dbaabcd9369022008b2f51c7e8455a mysql55-mysql-test-5.5.37-1.el5.i386.rpm x86_64: 01f9cce3a7328b587fbc6f744f08492d6f0f3c6fab2139a2f1d9e26c80ee4be3 mysql55-mysql-5.5.37-1.el5.x86_64.rpm b18f7c0cf1fd5a465df7b7d01902ad393524896d7ac08588c2d0cf0808e851d2 mysql55-mysql-bench-5.5.37-1.el5.x86_64.rpm 22df2756d2b7437358b49540c695270ef835a21ec475093e2f31d4af78bede06 mysql55-mysql-devel-5.5.37-1.el5.i386.rpm 868b22cfdfffbd21f3c700bcc3d2e37c016db79a05b0bc8a86e076bbd5c1724d mysql55-mysql-devel-5.5.37-1.el5.x86_64.rpm 94d37e86087e87ea2f33e93d17b42f8f38bfbbbea555155345fb541959b1d9f2 mysql55-mysql-libs-5.5.37-1.el5.x86_64.rpm d26ed3c56a5c7f28c5285d363199618eafa99608b94dafd6f9c743ef5381019c mysql55-mysql-server-5.5.37-1.el5.x86_64.rpm a8ec0bbec3398d280b29836d6356a37f28b197568aa62096e8c586463a73a571 mysql55-mysql-test-5.5.37-1.el5.x86_64.rpm Source: dddd7a93b6ce549ca8abfbcb4944070544dc07edcb2ceee0b37774871af644d1 mysql55-mysql-5.5.37-1.el5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Thu, 22 May 2014 23:25:52 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:0537 Moderate: mysql55-mysql SCL Security Update To: centos-announce(a)centos.org Message-ID: <20140522232552.GA17634(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0537 (CentOS Software Collections) The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) ----------------------------- X86_64 ----------------------------- b0fc2ef19139477f41242bbe96b5d739cb3ee7272aea5ef80130a3ad59af0cfe mysql55-mysql-5.5.37-1.2.el6.centos.alt.x86_64.rpm 4014a470d90d95e395b3b937017eda0fec67288175185cb8045a52b41761781d mysql55-mysql-bench-5.5.37-1.2.el6.centos.alt.x86_64.rpm 0fed2afab61b415194bf0b6fe44ceb9ec5837cecf0dee9ece4a7b256010cf929 mysql55-mysql-devel-5.5.37-1.2.el6.centos.alt.x86_64.rpm c54a04c04ee1308bc66fed0e34ac9d484259e9868ea726cca0a14d04ae09a550 mysql55-mysql-libs-5.5.37-1.2.el6.centos.alt.x86_64.rpm a289afb4ed73c70cf1d01e1a0ecc161238d3ab2b37254e8f20ba5c998afc3a2d mysql55-mysql-server-5.5.37-1.2.el6.centos.alt.x86_64.rpm fdda47c7de9cc1a68644b1b9b2a25d05ad8452bdafd044bbfb3ed6bde1aaac92 mysql55-mysql-test-5.5.37-1.2.el6.centos.alt.x86_64.rpm ----------------------------- Source: ----------------------------- a5b5e7b7942fff083035f2aada8b7d603a95d8494d02888e4e69accef5487f0e mysql55-mysql-5.5.37-1.2.el6.centos.alt.src.rpm ===================================================== The following upstream security issues are addressed in this update: https://rhn.redhat.com/errata/RHSA-2014-0537.html -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos at irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 111, Issue 12 ************************************************

1 0

snmp hang reading sensors?
by Les Mikesell 22 May '14

22 May '14

I have one machine (out of many with similar hardware) where snmp requests frequently time out and killing the snmpd process may take several minutes. The logs are full of entries like: ipmi_si ipmi_si.0: Error reading sensor 0. so I assume it is hanging trying to read some hardware sensor. Is there some way to make it skip that check so it won't hang? -- Les Mikesell lesmikesell(a)gmail.com

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss May 2014