Discuss

discuss@lists.centos.org

34753 discussions

access to file system through web browser
by Jobst Schmalenbach 06 Aug '10

06 Aug '10

Hi. I am trying to find "something" (php prefered) that I can stick onto a Centos apache server that would allow me to browse a selected file system by employees through a web-browser "explorer like" interface. I know I can do this through WinSCP (and have done so), but my problem is I have Linux, Windows and MAC clients and my knowledge of MAC's is rather limited. I can limit access to the (php) files to (ranges of) IP addresses, so security is reasonable ok and doing this through a web interface saves me time, too, as I only have to do this once, and security fixes is easy, too. Is there anything that would imitate a tree view like interface to browse a file system? Jobst -- "She said she loved my mind, though by most accounts I had already lost it."

8 10

Intel Graphics Media Accelerator 4500MHD and dual monitors
by CS_DBA 06 Aug '10

06 Aug '10

Hi All, Anyone know if the Intel Graphics Media Accelerator 4500MHD will support dual monitors with CentOS ? Thanks in advance /Kevin Sent from my iPad

2 1

who uses Lustre in production with virtual machines?
by Rudi Ahlers 05 Aug '10

05 Aug '10

I'm considering setting up a Lustre cluster system for our XEN virtual machines as shared storage, mainly for high availability on our XEN VPS servers. Does anyone use Lustre in a production environment? What is your opinions / experiences with it? One of the main reasons I'm looking at using Lustre is that we have a few older machines, of different specs that I want to use for storage purposes. i.e. I don't want to use proprietary, or matching hardware if I don't want to. Many of these machines are still in good standing and of good spec (3.2Ghz PIV + HT & 4GB RAM, Core2Duo + 4GB RAM, single XEON + 4GB RAM, dual core Atoms, etc) Will this work? -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog: http://Blog.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532

9 39

Manually mounting partitions in "linux rescue" mode
by Edward Diener 05 Aug '10

05 Aug '10

I boot from the installation DVD, with an already existing CentOS 5.5 system on my hard disks. I have separate boot, root, and home partitions. I have moved the boot partition and now I need to re-initialize grub from rescue mode. Attempting to use 'rescue mode" to automatically mount my system under /mnt/sysimage eventally fails with an error message, which essentially says 'mount error' and nothing else. I am then put at a command prompt as root. So now I decide to manually mount my partitions at /mnt/sysimage and then do a chroot to /mnt/sysimage. This succeeds and when I look at my files they are there. I now try 'grub' and the 'grub' shell comes up. I now attempt the 'grub' command: root (hd0,9) only to be met with: Error 21: Selected disk does not exist. I do not know what this means and how I can correct it. Does anybody know what is going on ? One thing I am concerned about is that when I booted from the DVD and was eventually put at the command prompt, I saw there were devices in the /dev subdirectory but after I did the chroot, there were no devices in the new root's /dev subdirectory although when I had previosuly booted into CentOS 5.5 on my hard disk off course they were there. The other thing I noticed is that after the 'chroot' the 'mount' command showed only my root partition mounted on /dev/sdb8 where it actually exists ( along with sysfs and proc which I mounted from the old root ). But despite this there are no subdirectories under the new root's /dev. I am just trying to re-initialize 'grub' so I can boot my CentOS 5.5 system again. There must be a way to successfully do this from the installation DVD. If somebody can give me the steps to manually mount my partitions and succeed it would be very much appreciated.

8 15

CentOS to RedHat and vice versa
by Kwan Lowe 05 Aug '10

05 Aug '10

Has anyone ever tried to mass replace installed RedHat RPMS with their equivalent CentOS versions or vice versa? I was thinking of generating a list of all packages and then running RPM or yum with a 'replace' option. The reason for doing this: Years ago I was tasked with building a RHEL4 system. Budgeting, time constraints, the lunar cycle, etc.., prevented the purchase of an equivalent development environment. So CentOS was used for the development/test system. It sufficed for several years. Now I need to make them as close to identical as possible which means registering the development system in RHN and making it "standard". I've seen posts that RHEL -> CentOS is at least possible. That is, take a RHEL system and get it to update via YUM and CentOS repositories. I have not seen the reverse, however.

3 4

mirrors down?
by m.roth＠5-cent.us 05 Aug '10

05 Aug '10

Just went to update a couple systems this morning, and first one machine took nearly 15 min to find the mirrors (and it should be getting it all from our own repo, actually), and then the next one showed about 8-10 mirrors down, including Harvard and VCU. Anyone know what's going on? mark

8 9

Re: [CentOS] mirrors down?
by m.roth＠5-cent.us 05 Aug '10

05 Aug '10

Steve Huff wrote: > > On Aug 5, 2010, at 10:07 AM, m.roth(a)5-cent.us wrote: > >> I do not believe it's a local yum issue. I tried to point firefox to >> http://mirror.harvard.edu, not exactly an obscure mirror, and it times >> out. As I work for an agency of the US gov't, and we have *fat* pipes, >> it's not likely to be on our end. > > Mark, > > 1) are you looking for CentOS mirrors or for RPMforge/Fedora/EPEL mirrors? > > 2) do you, perhaps, mean to point to http://mirror.hmdc.harvard.edu/ > rather than http://mirror.harvard.edu/? > > -steve > (AKA shuff(a)hmdc.harvard.edu) I see the email....<g> I just called our network support, and when I asked if there'd been a firewall change in the last 12 hours, was told "there's a routing issue", with no ETR. *sigh* Thanks, folks. mark "rollback the change, um, what's that mean?"

1 0

how to dual boot centos with redhat?
by hadi motamedi 05 Aug '10

05 Aug '10

Dear All On my centos machine, I need to install redhat on one of its partitions and so make it dual boot . Can you please let me know how this can be accomplished? Thank you

14 25

Introduction and request for help with virtualization
by Kevin Chang 04 Aug '10

04 Aug '10

Good morning everyone. This is my first post to this list. I am very new to Linux so please bear with me. Also, English is not my first language so please excuse me if I am unclear. I am trying to install CentOS Linux operating system in a virtualization setup. I have already built four host machines with CentOS 5.5 and KVM virtualization. I can install fine if I do a manual installation. I am now trying to automate the process. To this goal, I have create multiple LVMs inside my new volume group. The name of the volume group is vmstorage_vg. The problem occurs when I try to run the installation. I found a script via google: #!/bin/sh virt-install \ -n calcnode01 \ -r 1024 \ -f /dev/vmstorage_vg/calcnode01 \ --cdrom=/software/iso/CentOS-5.5_x86_64-boot.iso \ --accelerate \ --vnc \ -x "ks=ftp://192.168.0.101/pub/ks/calcnode01.ks ip=192.168.0.101 netmask=255.255.255.0 dns=192.168.0.20 gateway=192.168.0.1 text console=ttyS0" When I start this script from the SSH terminal it starts but I cannot see anything being installed. I entered the virsh console and see the calcnode01 entry if I do a list. If I try to connect using virsh I do not see anything. The kickstart was created from the anaconda file created from the manual installation. I enabled the options to create the filesystems. I think the installation is waiting on some input but I cannot see any console. I have tried with and without the "console=ttyS0" option. Thank you everyone for your time.

3 4

Kerberized NFS4 w/AD 2008 R2
by James A. Peltier 04 Aug '10

04 Aug '10

Is anyone currently using CentOS 5.5 with 2008 R2 AD authentication and a fully Kerberized NFSv4? If so would you mind sharing your configuration with me? I have been able to successfully get it working with Windows 2003 as discussed earlier on the list http://lists.centos.org/pipermail/centos/2010-July/096374.html With the exception that I had to use dynamic UIDs on the machine since we don't have Services for UNIX installed. Instead of going with a long drawn out certification of Windows 2003 R2 w/SFU, we plan to target our deployment in line with our Windows 2008 R2 campus deployment. I have followed everything that I did with Windows 2003 to get it working but NFSv4 w/Kerberos doesn't seem to work with 2008 R2 at all. No matter what I try I consistently get WARNING: Client not found in Kerberos database while getting initial ticket for principle NFS/hostname@DOMAIN using keytab or ERROR: No credentials found for connection to server any help would be appreciated. I've been banging my head against a wall for a while now and may have damaged to many brain cells to see what's going wrong. -- James A. Peltier Systems Analyst (FASNet), VIVARIUM Technical Director HPC Coordinator Simon Fraser University - Burnaby Campus Phone : 778-782-6573 Fax : 778-782-3045 E-Mail : jpeltier(a)sfu.ca Website : http://www.fas.sfu.ca | http://vivarium.cs.sfu.ca http://blogs.sfu.ca/people/jpeltier MSN : subatomic_spam(a)hotmail.com Gravity is a myth. The world just sucks!

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss