Discuss

discuss@lists.centos.org

34753 discussions

SATA errors on CentOS 5.2
by MHR 05 Nov '08

05 Nov '08

We have a new machine here that we are trying to use for CentOS as a base for our primary application. Although I do not have direct access to the physical machine, I have begun looking into it remotely (via ssh) to see why we are getting the following errors periodically: /var/log/messages.1-Nov 1 18:19:00 Centos5 kernel: hda: status timeout: status=0xd0 { Busy } /var/log/messages.1:Nov 1 18:19:00 Centos5 kernel: ide: failed opcode was: unknown /var/log/messages.1-Nov 1 18:19:00 Centos5 kernel: hda: no DRQ after issuing MULTWRITE_EXT /var/log/messages.1-Nov 1 18:19:00 Centos5 kernel: ide0: reset: success This happened 12 times (at least) in the last four days, and it (reportedly) does not occur if FC9 is booted on that machine. The machine is configured as follows: Pentium Core 2 Duo at 3.4GHz, 1GB RAM Intel m/b, not sure exactly which one, but here's what lspci shows: 00:00.0 Host bridge: Intel Corporation 82Q963/Q965 Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82Q963/Q965 Integrated Graphics Controller (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HO (ICH8DO) LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02) 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller 03:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller 04:0c.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) 04:0d.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) 04:0e.0 Communication controller: Comtrol Corporation RocketPort 16 port w/external I/F (rev 04) 04:0f.0 Non-VGA unclassified device: PLX Technology, Inc. PCI <-> IOBus Bridge (rev 01) The disk is a Seagate ST3250310NS (250GB) with an 8G /boot, 65G / and 160G /usr, with 2 2G swap partitions in the extended partition (!). (Seagate - I smell trouble, but, as I said, FC9 doesn't do this at all.) uname -a returns Linux Centos5.2SATAMaster 2.6.18-92.1.13.el5 #1 SMP Wed Sep 24 19:33:52 EDT 2008 i686 i686 i386 GNU/Linux. I've run the smartctl utility, and it shows no errors. What am I missing? Is it odd to have two SATA controllers for a single disk drive, or is that at all relevant? Thanks. mhr

4 11

program can check memory in application?
by adrian kok 05 Nov '08

05 Nov '08

Hi Any program can check the application is using how much memory? Thank you Send instant messages to your online friends http://uk.messenger.yahoo.com

2 1

nfs and permissions
by Anne Wilson 05 Nov '08

05 Nov '08

My CentOS box is my server for data and some services, including nfs shares. On my laptop I have folderviews displaying two directories on the server, via nfs mounts. An fstab line mounts each, such as: 192.168.0.40:/home /mnt/borg2_home nfs nosuid,exec,rw,bg,soft,intr 0 0 From the folderview I have no problem accessing the files and directories. Now comes the problem. I use kontact, with imap mail (working fine) and a calendar/diary (korganizer) mounted as a remote file. At least, I did, until this new install. I can give it the path, but I don't see any entries. I suspect that it is a permissions problem, but I can't see anything obvious. The firewall is temporarily disabled. Any ideas. please? Anne

2 2

How to get Bugzilla working on CentOS 5.2 with SELinux turned on?
by Aleksey Tsalolikhin 04 Nov '08

04 Nov '08

Hi. Has anyone figured out how to get Bugzilla working on CentOS 5.2 WITHOUT TURNING OFF SELINUX? I've run chcon -R --reference=/var/www/html /path/to/bugzilla and added the following module (generated by audit2allow), but am still getting errors in my Web browser tryinig to use Bugzilla: Software error: Can't connect to the database. Error: could not connect to server: Permission denied Is the server running on host "localhost" and accepting TCP/IP connections on port 5432? Is your database installed and up and running? Do you have the correct username and password selected in localconfig? And there is an AVC denial as well: type=AVC msg=audit(1225832104.970:405): avc: denied { connect } for pid=30831 comm="index.cgi" scontext=user_u:system_r:httpd_sys_script_t:s0 tcontext=user_u:system_r:httpd_sys_script_t:s0 tclass=tcp_socket Here is the module I added: module local 1.0; require { type httpd_sys_script_t; class tcp_socket setopt; } #============= httpd_sys_script_t ============== allow httpd_sys_script_t self:tcp_socket setopt; [root@hwd-ddc-app-prod01 selinux]# httpd_sys_script_t ============== allow httpd_sys_script_t self:tcp_socket setopt; I've tried running the AVC denial message through audit2allow again, but it just produced the same module that I already have loaded. Any suggestions? Thanks, Aleksey -- Aleksey Tsalolikhin UNIX System Administrator "I get stuff done!" http://www.lifesurvives.com/

2 1

Closing a multi-session disk
by Anne Wilson 04 Nov '08

04 Nov '08

I have a disk which is not being recognised for reading, and I suspect that it may be a multi-session disk which has not been closed. K3b seems to agree with me, since it lists it as an appendable data cd. However, I can't find any way to close the session in k3b. I thought I remembered that it was possible to do that in xcdroast - which is almost certainly the application that burned the disk in the first place. However, xcdroast tells me that no disk is loaded. That brings me to ask those of you that use command-line burning if you know of any way I can close this disk. I suspect the files on it are ones that I don't have elsewhere. Anne

3 6

boot problems
by fabian dacunha 04 Nov '08

04 Nov '08

Dear All, I am quite new to centos i had installed centos 5.2 to be as a squid proxy server and it was working fine for over a month or so but 3 days back the machine after a reboot jus refused to boot it jus was goin to the grub prompt i wd really apprecite if someone cd help me .. cd i boot from centos boot cd n go to rescue mode and check grub 2) if grub is OK how cd i reinstall centos without destroying data 3) any other tps to check out the problem cd be highly apprecited regards Fabian -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

9 10

pup update for mplayer: missing dependency libizo.so.1
by Lanny Marcus 04 Nov '08

04 Nov '08

I am updating my daughters CentOS 5.2 box. When pup was Resolving Dependencies, I got an error for mplayer: "Missing dependency. libizo.so.1 is needed by package mplayer". Questions: (a) Where do I get that file? (b) How do I install it? TIA! Lanny

4 7

CentOS-announce Digest, Vol 45, Issue 2
by centos-announce-request＠centos.org 04 Nov '08

04 Nov '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:0971 Important CentOS 5 i386 net-snmp Update (Karanbir Singh) 2. CESA-2008:0971 Important CentOS 5 x86_64 net-snmp Update (Karanbir Singh) 3. CESA-2008:0971 Important CentOS 3 i386 net-snmp - security update (Tru Huynh) 4. CESA-2008:0971 Important CentOS 3 x86_64 net-snmp - security update (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Mon, 3 Nov 2008 19:25:11 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:0971 Important CentOS 5 i386 net-snmp Update To: centos-announce(a)centos.org Message-ID: <20081103192511.GA4672(a)vkalu.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:0971 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-0971.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: bf7e37233e6e3d4f7761415a6947f5d5 net-snmp-5.3.1-24.el5_2.2.i386.rpm 1345fe20386781b6888bd3037833e427 net-snmp-devel-5.3.1-24.el5_2.2.i386.rpm 4cd9420e64f0a02182b3ff52e90c0332 net-snmp-libs-5.3.1-24.el5_2.2.i386.rpm 096b2597a0df76a7cd09423e9bf134be net-snmp-perl-5.3.1-24.el5_2.2.i386.rpm f8677a55b21d06b9ffb5e5ca14c09277 net-snmp-utils-5.3.1-24.el5_2.2.i386.rpm Source: 33b1ced85b82bd81a38383eed25b55f5 net-snmp-5.3.1-24.el5_2.2.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 3 Nov 2008 19:25:11 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:0971 Important CentOS 5 x86_64 net-snmp Update To: centos-announce(a)centos.org Message-ID: <20081103192511.GA4687(a)vkalu.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:0971 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-0971.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: dbba57d2b96429f28e2398b57a11a794 net-snmp-5.3.1-24.el5_2.2.x86_64.rpm 7aac59a634e8d6f6d29513d16184f894 net-snmp-devel-5.3.1-24.el5_2.2.i386.rpm d6b85b2188f684db23b787540d65f3f1 net-snmp-devel-5.3.1-24.el5_2.2.x86_64.rpm 1e6e0c2c7b731e7f1633869d76de90e3 net-snmp-libs-5.3.1-24.el5_2.2.i386.rpm 5683335b6265c039abdb35aad2a09d2a net-snmp-libs-5.3.1-24.el5_2.2.x86_64.rpm f65f4c9faad05b95e044b63d09a20544 net-snmp-perl-5.3.1-24.el5_2.2.x86_64.rpm 6c50375aefbffefdde9c770e73992149 net-snmp-utils-5.3.1-24.el5_2.2.x86_64.rpm Source: 33b1ced85b82bd81a38383eed25b55f5 net-snmp-5.3.1-24.el5_2.2.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 3 Nov 2008 21:40:39 +0100 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2008:0971 Important CentOS 3 i386 net-snmp - security update To: centos-announce(a)centos.org Message-ID: <20081103204039.GA14157(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2008:0971 net-snmp security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2008-0971.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/net-snmp-5.0.9-2.30E.25.i386.rpm updates/i386/RPMS/net-snmp-devel-5.0.9-2.30E.25.i386.rpm updates/i386/RPMS/net-snmp-libs-5.0.9-2.30E.25.i386.rpm updates/i386/RPMS/net-snmp-perl-5.0.9-2.30E.25.i386.rpm updates/i386/RPMS/net-snmp-utils-5.0.9-2.30E.25.i386.rpm source: updates/SRPMS/net-snmp-5.0.9-2.30E.25.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update net-snmp Tru -- Tru Huynh (mirrors, CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

rpm spec question
by Tom Brown 04 Nov '08

04 Nov '08

Hi I am trying to package a bunch of files so that i can deploy them with rpm - Its prtty much just a case of dumping some files on the filesystem. I achieve this with rpm without issue however when i remove the rpm from the system it also removes the dir that contains the files, even though i dont specify this in the %postun. Is there a way to tell rpm to NOT remove files/dir's that it creates unless i request it? thanks

2 2

[OT] List of all email users
by Jussi Hirvi 04 Nov '08

04 Nov '08

This is not CentOS-specific, hence OT. I need a list of all email users on my system (there are hundreds of them). The list could be extracted from /etc/aliases and the virtusertable. Does anyone know of a script that would do this automatically? It would have to - exclude commented-out lines (of course) - exclude duplicates - produce a list of usernames (or maybe unresolved email addresses for some users) separated by a comma I imagine perl would be the way to go. I haven't used perl at all myself. Regards, Jussi -- Jussi Hirvi * Green Spot Topeliuksenkatu 15 C * 00250 Helsinki * Finland Tel. & fax +358 9 493 981 * Mobile +358 40 771 2098 (only sms) jussi.hirvi(a)greenspot.fi * http://www.greenspot.fi

6 11

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss