Discuss

discuss@lists.centos.org

34758 discussions

Re: CentOS Digest, Vol 34, Issue 5
by Radek Bursztynowski 05 Nov '07

05 Nov '07

> ------------------------------ > > Message: 4 > Date: Sun, 04 Nov 2007 18:38:14 +0200 > From: Bazy <bazy(a)goofy.celuloza.ro> > Subject: Re: [CentOS] tftp-server > To: CentOS mailing list <centos(a)centos.org> > Message-ID: <472DF576.2030601(a)goofy.celuloza.ro> > Content-Type: text/plain; charset=ISO-8859-1 > > Radek Bursztynowski wrote: > > Hello, > > > > I have just installed Centos 5 and I have some problem with tftp-server. > > I use the same configuration like with Centos 4.4. With Centos 4.4 > > everything works properly. > > > > With Centos 5 DHCP server sends IP address to the client and client is > > booting. I can see: > > > > > > TFTP prefix: /lts/2.6.20.9-ltsp-1/ > > Trying to load: pxelinux.cfg/01-00-0c-29-62-e2-ed > > Trying to load: pxelinux.cfg/C0A8001D > > > > (several trials of loading and at the end I receive: > > > > # boot: > > > > When I switch dhcp and tftp servers to Centos 4.4 (using the same config > > files) everything comes back to the order. > > > > What can I do with Centos 5 to fix this problem? > > > > > > Best regards > > Radek Bursztynowski > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > CentOS mailing list > > CentOS(a)centos.org > > http://lists.centos.org/mailman/listinfo/centos > > Just a guess... check the permissions on the /tftpboot or /srv/tftp, > where your tftp root directory is located and chmod 777 it. > > If your using xinetd to run the tftp server please paste the > /etc/xinetd.d/tftp file on the list. > > Many thanks for support but it doesn't solve my problem. I use proper permissions. Regards, Radek

1 0

help with script
by Mark Snyder 05 Nov '07

05 Nov '07

I am doing a md5sum to verify nightly transfer of files between servers and want to email the results to support. Everything works fine except reading the contents of the check file into mail. Any suggestions or help would be much appreciated. #!/bin/bash cd /bak md5sum -b `date '+%m-%d-%y'`.tgz > `date '+%m-%d-%y'`.ver diff -s `date '+%m-%d-%y'`.md5 `date '+%m-%d-%y'`.ver > `date '+%m-%d-%y'`.chk #outfile=`date '+%m-%d-%y'`.chk #setup name of file to read into mail mail -s 'file verify' me(a)mymailaddr.com <<MAIL_IN ~r `date '+%m-%d-%y'`.chk . MAIL_IN exit entering the same mail commands from a command prompt works. Mark

4 7

Sort imap e-mail remotely
by Patrick Lodder 05 Nov '07

05 Nov '07

Hi all, I have a big e-mail box over at my provider. I receive a lot of e-mail every day (over 100), which are distributed into different imap-folders by thunderbird. The problem is that thunderbird must be running (offcourse) to be able to it's job. And for thunderbird to run, my (home)computer must be running. I have a CENTOS 5 server running also. Are there any programs out there that work via command line or as a daemon, that i can use to sort my imap e-mail. I've googled a bit, but didn't come up with a solution(maybe I'm search with the wrong keywords). I found fetchmail & procmail, but I wasn't able to figure out if they can do it. Cheers, Patrick

8 9

Tomcat 4 on Centos 4.1
by Satish Kumar 05 Nov '07

05 Nov '07

I have a small question, Can I set it up with Tomcat 5.5 ? Satish

1 0

mdadm syntax
by Art Baldini 05 Nov '07

05 Nov '07

Hi All, I am trying to create an MD device. I am using the command: /sbin/mdadm --create --a /dev/md12 --level=1 --run --raid-devices=2 /dev/sda12 /dev/sdb12 to create the device, and to dynamically create the device file if needed. What I want is the device file to be created as /dev/md12, but with the -a flag it creates it as /dev/md<first unwsed minor number>. I have tried various options to the -a or --auto, but cannot seem to find the correct syntax. From the man page it says: -a, --auto{=no,yes,md,mdp,part,p}{NN} Instruct mdadm to create the device file if needed, and to allocate an unused minor number. "yes" or "md" causes a non-partitionable array to be used. "mdp", "part" or "p" causes a partitionable array (2.6 and later) to be used. The argumentment can also come immediately after "-a". e.g. "-ap". Am I doing something wrong, or is there no way to get mdadm to automatically create a specific device file. Thanks...

3 4

centos base install
by Mark Quitoriano 05 Nov '07

05 Nov '07

Hi, im trying to create a trimmed down version of centos. just the base installation no services or anything, if i can trim it down to kernel bash and yum only working that would be great. What programs and dependencies i need for this kind of installation? thanks!

2 2

centos 5+intel desktop board D102GGC2 video problem
by Mark Quitoriano 05 Nov '07

05 Nov '07

Hi i installed centos 5 and im having problem with starting X. but when i kill xorg process the GUI just pops up working properly, anyone experience this before?

1 0

Re: [CentOS] Yum Problem
by Jun Salen 05 Nov '07

05 Nov '07

Jun Salen ha scritto: > Hi, > > I have no problem running yum update inside the root prompt, but when running yum using sudo as logged-in as ordinary user and command the 'sudo yum update', I am having below error: > > Could not retrieve mirrorlist http://apt.sw.be/redhat/el5/en/mirrors-rpmforge error was > [Errno 4] IOError: <urlopen error (110, 'Connection timed out')> > Error: Cannot find a valid baseurl for repo: rpmforge > > This happened even I try to export my proxy server since where using them to connect internet. This is in a newly installed CentOS5 box. I also try to issue 'yum clean metadata' and 'yum clean all' but the problem still persists. Can you please give me the clue on how to solve this. > > Thanks, > > junji > aisalen.wordpress.com > Linux Registered User #253162 Is this appening even if you put the proxy=http://<host>:<port> directive on /etc/yum.conf ? Regards Lorenzo Quatrini ---------------------------- Do you mean http_proxy=http://<host>:<port>? Yes, it still happens even after I try proxy=http://<host>:<port>. Sorry for the delay answer, due to long holiday. Thanks, junji aisalen.wordpress.com Linux Registered User #253162 Send instant messages to your online friends http://uk.messenger.yahoo.com

2 1

Question about centosplus kernel and jfs...
by Jean-Yves Avenard 05 Nov '07

05 Nov '07

Hello I run the latest kernel from centosplus and use a JFS partition. Even though the jfs tools are installed, when the server crashes, it doesn't run fsck.jfs automatically when at boot time it detects that the partition is corrupted I have to run fsck.jfs manually and mount the drive. Is there a way to make fsck.jfs run automatically if required ? (I recently moved from Fedora to CentOS, so pardon my ignorance here) Thank you Jean-Yves

1 1

Re: [CentOS] Yum Problem - SOLVED
by Jun Salen 05 Nov '07

05 Nov '07

Jun Salen ha scritto: > Hi, > > I have no problem running yum update inside the root prompt, but when running yum using sudo as logged-in as ordinary user and command the 'sudo yum update', I am having below error: > > Could not retrieve mirrorlist http://apt.sw.be/redhat/el5/en/mirrors-rpmforge error was > [Errno 4] IOError: <urlopen error (110, 'Connection timed out')> > Error: Cannot find a valid baseurl for repo: rpmforge > > This happened even I try to export my proxy server since where using them to connect internet. This is in a newly installed CentOS5 box. I also try to issue 'yum clean metadata' and 'yum clean all' but the problem still persists. Can you please give me the clue on how to solve this. > > Thanks, > > junji > aisalen.wordpress.com > Linux Registered User #253162 Is this appening even if you put the proxy=http://<host>:<port> directive on /etc/yum.conf ? Regards Lorenzo Quatrini ----------------------------- Hi Lorenzo, I answered this a while ago and I am very fast in answering your suggestion not waiting the result of my command because it froze a while. Actually it works using your directive. So it must be proxy instead of http_proxy. Thank you very much, junji aisalen.wordpress.com Linux Registered User #253162 Send instant messages to your online friends http://uk.messenger.yahoo.com

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss