Discuss

discuss@lists.centos.org

34753 discussions

Re: [CentOS] Re: Zimbra error on centos 4.4 (SOLVED)
by Indunil Jayasooriya 11 Oct '07

11 Oct '07

Hi All, Thanks eveyone. I had a fresh installation. My box behind the firewall. it has a private ip. So irst o all, I setup DNS on that box and add that ip ( 192.168.101.38) to /etc/resolve.conf. the below URL helped me. http://wiki.zimbra.com/index.php?title=Beginner%27s_Guide_to_installing_Zim… Then, ran Zimbra. It went all the way long successully. So I now have zimbra up and running. On 10/10/07, Chris <racerx(a)makeworld.com> wrote: > > On Wed, 10 Oct 2007 13:43:46 +0530 > "Indunil Jayasooriya" <indunil75(a)gmail.com> wrote: > > > Hi, > > > > Thanks everyone that helped me so far. I got it up and running. I > > gave a public ip to the zimbra box and wrote a MX record for it. > > Everything works fine. > > > > Then, I changed the public ip and gave it a bogus ip (192.168.101.28) > > and wrote a port 25 DNAT rule to taht zimbra box. It recives mail. > > But, When I go to my account, No email can be found in inbox. > > > > WHY? > > > > YOUR IDEADS. > > > > > > You are better off posing that question to the Zimbra Forums on the > Zimbra website. > > -- > Best regards, > Chris > Registerd Linux user number 448639 > -- Thank you Indunil Jayasooriya

1 0

How to export X displays
by techlists＠comcast.net 11 Oct '07

11 Oct '07

I have a CentOS server at home and want to view the X display on a laptop running Ubuntu, and not having much success. Here's what's been tried so far: I ran this command on the CentOS server: export DISPLAY=192.168.0.18:0.0 And ran this command on the Ubuntu laptop: xauth +192.168.0.2 When I try to run, say, xclock on the Ubuntu laptop, this is the error message I'm getting: [root@centos-ws ~]# xclock Error: Can't open display: 192.168.0.18:0.0 I'm assuming there's an important little detail I'm missing somewhere, but don't know what. Any suggestions? Paul

14 21

NDOutils ./configure results; do I need gcc?
by Rogelio 11 Oct '07

11 Oct '07

I am trying to trying to "./configure" NDOutils on a CentOS 4.4 box with a minimal install, but it gives me the following error, which I assume means I need something gcc-related? *********************./configure output ******************** ************************************************************** checking for a BSD-compatible install... /usr/bin/install -c checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for gcc... no checking for cc... no checking for cc... no checking for cl... no configure: error: no acceptable C compiler found in $PATH See `config.log' for more details. ************************************************************** ************************************************************** I did a "yum search gcc" and found several packages that look like they might be what I need. I assume that it's "gcc-c++" that I need? (And for what it's worth, here is my config.log results) ******************** config.log ***************************** ************************************************************** ************************************************************** This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by configure, which was generated by GNU Autoconf 2.59. Invocation command line was $ ./configure ## --------- ## ## Platform. ## ## --------- ## hostname = localhost.localdomain uname -m = i686 uname -r = 2.6.9-42.ELsmp uname -s = Linux uname -v = #1 SMP Sat Aug 12 09:39:11 CDT 2006 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = i686 /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /usr/kerberos/sbin PATH: /usr/kerberos/bin PATH: /usr/local/sbin PATH: /usr/local/bin PATH: /sbin PATH: /bin PATH: /usr/sbin PATH: /usr/bin PATH: /usr/X11R6/bin PATH: /root/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:1337: checking for a BSD-compatible install configure:1392: result: /usr/bin/install -c configure:1411: checking build system type configure:1429: result: i686-pc-linux-gnu configure:1437: checking host system type configure:1451: result: i686-pc-linux-gnu configure:1506: checking for gcc configure:1535: result: no configure:1586: checking for cc configure:1615: result: no configure:1628: checking for cc configure:1674: result: no configure:1727: checking for cl configure:1756: result: no configure:1770: error: no acceptable C compiler found in $PATH See `config.log' for more details. ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=i686-pc-linux-gnu ac_cv_build_alias=i686-pc-linux-gnu ac_cv_env_CC_set= ac_cv_env_CC_value= ac_cv_env_CFLAGS_set= ac_cv_env_CFLAGS_value= ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_LDFLAGS_set= ac_cv_env_LDFLAGS_value= ac_cv_env_build_alias_set= ac_cv_env_build_alias_value= ac_cv_env_host_alias_set= ac_cv_env_host_alias_value= ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_host=i686-pc-linux-gnu ac_cv_host_alias=i686-pc-linux-gnu ac_cv_path_install='/usr/bin/install -c' ## ----------------- ## ## Output variables. ## ## ----------------- ## CC='' CFLAGS='' CPP='' CPPFLAGS='' DBCFLAGS='' DBLDFLAGS='' DBLIBS='' DEFS='' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='' EXEEXT='' INSTALL='/usr/bin/install -c' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' LDFLAGS='' LIBOBJS='' LIBS='' LIBWRAPLIBS='' LTLIBOBJS='' MOD_CFLAGS='' MOD_LDFLAGS='' OBJEXT='' OTHERLIBS='' PACKAGE_BUGREPORT='' PACKAGE_NAME='' PACKAGE_STRING='' PACKAGE_TARNAME='' PACKAGE_VERSION='' PATH_SEPARATOR=':' SET_MAKE='' SHELL='/bin/sh' SOCKETLIBS='' ac_ct_CC='' bindir='${exec_prefix}/bin' build='i686-pc-linux-gnu' build_alias='' build_cpu='i686' build_os='linux-gnu' build_vendor='pc' datadir='${prefix}/share' exec_prefix='NONE' host='i686-pc-linux-gnu' host_alias='' host_cpu='i686' host_os='linux-gnu' host_vendor='pc' includedir='${prefix}/include' infodir='${prefix}/info' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localstatedir='${prefix}/var' mandir='${prefix}/man' oldincludedir='/usr/include' prefix='NONE' program_transform_name='s,x,x,' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='${prefix}/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## #define PACKAGE_BUGREPORT "" #define PACKAGE_NAME "" #define PACKAGE_STRING "" #define PACKAGE_TARNAME "" #define PACKAGE_VERSION "" configure: exit 1

3 3

Balsa for CentOS ??
by fred smith 11 Oct '07

11 Oct '07

Anybody know where I can find a RPM of a recent version of Balsa for RH5 or Centos 5? Dag, et al, don't seem to have it. Thanks! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- The Lord is like a strong tower. Those who do what is right can run to him for safety. --------------------------- Proverbs 18:10 (niv) -----------------------------

2 2

Replacing failed software RAID drive
by Hugh E Cruickshank 10 Oct '07

10 Oct '07

CentOS release 4.5 Hi All: First of all I will admit to being spoiled by my MegaRAID SCSI RAID controllers. When a drive fails on one of them I just replace the drive and carry on with out having to do anything else. I now find myself in the situation where I have a failed drive on a non-MegaRAID controller, specifically an Adaptec 29160 SCSI controller. The system is an Acer G700 with 8 internal hot-swappable SCSI drives arranged in two banks of 4 drives. Each bank is connected to a separate channel on the 29160 controller. When I installed CentOS 4 I enable software mirroring between the two banks so that I ended up with 4 pairs of mirrored drive (sda/sde, sdb/sdf, sdc/sdg, sdd/sdh). The problem I have now is that it is sda (the boot drive) that has failed. I have not encountered this problem before and therefore I need to make sure that I understand what I need to do before I start mucking around with things and dig myself into a deeper hole. I have spent much time attempting to research the problem but have not been able to come with any definite information to help. As far as I can see I have two options... Option 1: Leave the system running and replace the drive. Then either the RAID software will re-sync the drives or I can manually sync them with mdadm. I have not seen anything that will support this option but I am hoping that it is a valid option. Option 2: Create a boot disk (floppy or CD) that I can boot from but that points to sde (the boot mirror). Shutdown the system and replace the failed sda drive. Boot from the new boot disk. Format, partition and re-sync the new sda from sde. Shutdown, remove the boot disk, and reboot from the new sda. Can anyone confirm either of these options and point me in the right direction to any documentation that would assist me. TIA Regards, Hugh -- Hugh E Cruickshank, Forward Software, www.forward-software.com

5 16

nscd segfaulting on centos 4.5
by jlee 10 Oct '07

10 Oct '07

Does anyone know if there is a fix for nscd segfaulting after a short period of time. Googling for it came up with one result that suggested deleting the files in /var/db/nscd , but that didn't help. Another result was about run away processes which is not the problem I'm having. They are x86_64 boxes. output from /var/log/messages Oct 9 12:56:38 lyra kernel: nscd[11660]: segfault at 0000002b401fee8b rip 000000552aab7966 rsp 00000000408029e0 error 4 Oct 9 13:16:38 lyra kernel: nscd[12540]: segfault at 0000002b401fee8b rip 000000552aab7966 rsp 00000000408029e0 error 4 output from dmesg nscd[12540]: segfault at 0000002b401fee8b rip 000000552aab7966 rsp 00000000408029e0 error 4 nscd[13640]: segfault at 0000002b401fee8b rip 000000552aab7946 rsp 0000000040a039e0 error 4 output from uname 2.6.9-55.0.9.ELsmp #1 SMP Thu Sep 27 18:28:00 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux

5 12

CD emulation (a la daemontools)
by Chris Mauritz 10 Oct '07

10 Oct '07

I was wondering if anyone was aware of a method for mounting virtual CD devices with CD image files. I keep images (.CUE/.BIN pairs) of my CD collection on a NAS appliance tucked away in my closet. I'd like to write a script to mount each one, create ID tags, rip the tracks, then move along to the next one. I figure with a quad core opteron, it should be able to crank through them in a few days (it's a few thousand CD's worth of images). Anyone done this before with their trusty CentOS box? I'd be using CentOS 5. Best,

4 3

Re: [CentOS] PCI-X SATA RAID Controllers
by Steve Bluck 10 Oct '07

10 Oct '07

Thanks for the replies (and thanks Matt, PCI-e is indeed what I meant -brain freeze moment), I realise "linux dd" works -and is in fact how I've installed CentOS 5, but unfortunately I require a card (PCI even!) that will not require driver updates every kernel update and support a minimum of 6 ports in RAID 1. Being a noob at Linux I'm having trouble sourcing a card that is supported in the 2.6.18 kernel without the need to install drivers, and replies from manufacturers either evade the question or require a Masters degree in Linux, so I thought I'd tap into the combined knowledge of everyone here! So I'm still open to suggestions! Cheers Steve > I would recommend PCI-E if you want the fastest card available, and > using the 'linux dd' option before you install CentOS 5 allows you to > load the 3ware kernel module prior to installation which is what I > did to get my 9650SE-16 working. ;-)

3 2

ssh X11 forwarding not working
by James A. Peltier 10 Oct '07

10 Oct '07

I'm having problems with ssh.com and X11 forwarding ssh: SSH Secure Shell 3.2.0 (non-commercial version) on i686-pc-linux-gnu I am in the process of testing some of my machines with CentOS 5 x86/x86_64 and have run into a bit of a snag. X11 Forwarding is not working. I've tried all combinations of (+/-)[Xx] and it doesn't work, seemingly it doesn't want to set the environment variable properly and therefore doesn't know where to send the X requests. Any hints? I've checked the ssh config files and they seem to be identical to the config files on our existing SuSE 10.0 machines which are working. This is troubling indeed. -- James A. Peltier Technical Director, RHCE SCIRF | GrUVi @ Simon Fraser University - Burnaby Campus Phone : 778-782-3610 Fax : 778-782-3045 Mobile : 778-840-6434 E-Mail : jpeltier(a)cs.sfu.ca Website : http://gruvi.cs.sfu.ca | http://scirf.cs.sfu.ca MSN : subatomic_spam(a)hotmail.com

7 12

NFS and Firewall
by Timothy Kesten 10 Oct '07

10 Oct '07

Hi Folks, I'm using VMWare on a Linux Host (CentOS) with a Linux-Guest Sidux). And I'd like to use NFS. Furthermore I'd like to use the Firewall in CentOS with this little GUI. If I activate this firewall then my Guest says "no route to host" on mounting nfs. Firewall disabled -> no problem occurs. Is there a solution to use firewall _and_ nfs ? Please, no iptables scripts. I'd like to use this small GUI for the firewall. Thx Timothy

3 4

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss