Discuss

discuss@lists.centos.org

34758 discussions

CentOS5 and VMware
by centos＠911networks.com 23 May '07

23 May '07

I have the 6 CDs for CentOS 5, and I have installed it on a couple of computers without any problem. I just tried to create a virtual machine under VMware 5.5.4, it goes through the 1st CD without problem, and crashes on the 2nd CD for Xorg. Any suggestion? -- Thanks http://www.911networks.com When the network has to work

5 4

Vsftpd & Iscsi - fast enough
by Karl R. Balsmeier 23 May '07

23 May '07

To extend space on our 64-bit centos FTP servers, we are considering setting them up to work with an existing PromiseRAID system via iscsi. -just curious if anyone here knows if iScsi is fast enough to serve up all the images? -might it be something where we get dedicated cards and put the iScsi traffic on its own Vlan? Just curious if this would hold up under alot of traffic, like weather images and the like... -karl

8 19

iptables patch-o-matic
by Andreas Micklei 23 May '07

23 May '07

Hi, I am trying to install some additional iptables modules on a CentOS 5 Box (imq, tarpit, geoip). Can anyone recommend a version of patch-o-matic-ng that works well with the CentOS 5 kernel sources (2.6.18-8.1.4)? The most current version (patch-o-matic-ng-20070521.tar.bz2) does not compile. With patch-o-matic-ng-20061128.tar.bz2 I could at least get tarpit working but geoip and imq seem to be missing. Did anyone build these on CentOS 5? Is there a better way than using pom? regards, Andreas Micklei -- Andreas Micklei IVISTAR Kommunikationssysteme AG Ehrenbergstr. 19 / 10245 Berlin, Germany http://www.ivistar.de Handelsregister: Berlin Charlottenburg HRB 75173 Umsatzsteuer-ID: DE207795030 Vorstand: Dr.-Ing. Dirk Elias Aufsichtsratsvorsitz: Dipl.-Betriebsw. Frank Bindel

1 0

Re: [CentOS] A question about RAID and partitions
by Miguel Medalha 23 May '07

23 May '07

From: "Brent L. Bates" > If you really want separate partitions for all of those directories, > why > you would I don't know, create separate partitions on each drive and RAID > the > partitions as needed. (...) > /boot / /home /swap /tmp /var As far as I know, that kind of partitioning scheme is fairly common with servers. You wouldn't want your users filling up the whole disk and bringing the system to a crawl or halt, or the log files from the web server doing the same, would you? So, give them separate spaces that cannot be trespassed! Some distributions of Linux automatically create this partitioning scheme when you choose Instalation Type=Server.

1 0

Help me in building a initrd*.img in CentOS 5 for Intel SATA driver.
by Shreenidhi Nidugala 23 May '07

23 May '07

Hi All, Can anybody help me in building a initrd*.img in CentOS 5 for Intel SATA driver. More Details: I have a driver package downloaded from the Intel Web site: http://www.intel.com/support/motherboards/server/s3000ah/index.htm It is for an Intel motherboard S3000AH using the embedded RAID controller. We need this driver to work with CentOS5. I'd like to get help with the following: - Compile the attached driver package against a standard CentOS5 kernel and provide a driver module. - Description of the procedure on how this is done. Thanks in Advance, Shreenidhi

1 0

java packages - tomcat5?
by Les Mikesell 23 May '07

23 May '07

Have the jpackage-packaged things like tomcat5 been moved into the disto repositories? Do they work with sun java? In particular, tomcat5 used to require jta. The one yum installs doesn't mention it now, but it also doesn't work with sun java 1.5 installed the jpackage way. What am I missing? -- Les Mikesell lesmikesell(a)gmail.com

2 2

CentOS-announce Digest, Vol 27, Issue 14
by centos-announce-request＠centos.org 23 May '07

23 May '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0343-01: Moderate CentOS 2 i386 gimp security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Wed, 23 May 2007 11:17:37 +1000 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2007:0343-01: Moderate CentOS 2 i386 gimp security update To: centos-announce(a)centos.org Message-ID: <46539631.5080500(a)ict.swin.edu.au> Content-Type: text/plain; charset=us-ascii; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2007:0343-01 Moderate: gimp security update Files available: gimp-1.2.1-7.1.el2_1.i386.rpm gimp-devel-1.2.1-7.1.el2_1.i386.rpm gimp-perl-1.2.1-7.1.el2_1.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 27, Issue 14 ***********************************************

1 0

kannel on CentOS 5
by Indunil Jayasooriya 23 May '07

23 May '07

Hi, has anybody out there who has setup kannel on CentOS 5. I just installed from src.rpm pls see below for installed rpms. [root@mailgw ~]# rpm -qa |grep kannel kannel-1.4.1-2.rf kannel-debuginfo-1.4.1-2.rf kannel-devel-1.4.1-2.rf I want to setup kannel for sending SMS via a web browser on this CentOS 5 box. I googled a lot. But I could not find a lot of info. I think I need an external modem as well. What type of external modem do u recommend? Pls see below for my /etc/kannel.conf file. [root@mailgw ~]# cat /etc/kannel.conf # # THIS IS A SAMPLE CONFIGURATION FOR SMS KANNEL # # It is run like this: # # 1% gw/bearerbox gw/smskannel.conf # 2% gw/smsbox gw/smskannel.conf # 3% test/fakesmsc -p 10000 -H localhost -i 1 -m 100 "123 345 text nop" # # ..all 3 commands in separate shells (or screen sessions) # # For any modifications to this file, see Kannel User Guide # If that does not help, send email to users(a)kannel.org # # Kalle Marjola May 2000 # Changed for new fakesmsc version by Uoti Urpala Jan 2001 # Added service and sendsms for HTTP SMSC by Kalle Marjola Mar 2001 # group = core admin-port = 13000 smsbox-port = 13001 admin-password = bar #status-password = foo #admin-deny-ip = "" #admin-allow-ip = "" #log-file = "/tmp/kannel.log" log-file = "/var/log/kannel/bearerbox.log" log-level = 0 box-deny-ip = "*.*.*.*" box-allow-ip = "127.0.0.1" #unified-prefix = "+358,00358,0;+,00" #access-log = "/tmp/access.log" #store-file = "/tmp/kannel.store" #ssl-server-cert-file = "cert.pem" #ssl-server-key-file = "key.pem" #ssl-certkey-file = "mycertandprivkeyfile.pem" # SMSC CONNECTIONS group = smsc smsc = at modemtype = auto device=/dev/ttyS0 my-number = 123123123123 connect-allow-ip = 127.0.0.1 log-level = 0 # SMSBOX SETUP group = smsbox bearerbox-host = localhost sendsms-port = 13013 global-sender = 13013 #sendsms-chars = "0123456789 +-" log-file = "/tmp/smsbox.log" log-file = "/var/log/kannel/smsbox.log" #log-level = 0 #access-log = "/tmp/access.log" access-log = "/var/log/kannel/access.log" # SEND-SMS USERS group = sendsms-user username = tester password = foobar #user-deny-ip = "" #user-allow-ip = "" # SERVICES group = sms-service keyword = nop text = "You asked nothing and I did it!" # there should be default always group = sms-service keyword = default text = "No service specified" Have I included evrything essentinal for my set up. Could you pls help me to solve this? -- Thank you Indunil Jayasooriya

1 0

clamav error
by Indunil Jayasooriya 23 May '07

23 May '07

Hi All, I installed clam on CentOS 5 as below. yum install clamav clamav-db clamd I got them form Dag. below are the RPMS I installed. [root@box ~]# rpm -qa |grep clam clamav-db-0.90.2-1.el4.rf clamd-0.90.2-1.el4.rf clamav-0.90.2-1.el4.rf But, when I restart clam it gives following error. [root@box init.d]# /etc/init.d/clamd restart Stopping Clam AntiVirus Daemon: [FAILED] Starting Clam AntiVirus Daemon: [ OK ] [root@box init.d]# tail -f /var/log/clamav/clamd.log Wed May 16 10:46:43 2007 -> +++ Started at Wed May 16 10:46:43 2007 Wed May 16 10:46:43 2007 -> clamd daemon 0.90.2 (OS: linux-gnu, ARCH: i386, CPU: i386) Wed May 16 10:46:43 2007 -> Log file size limit disabled. Wed May 16 10:46:43 2007 -> Reading databases from /var/clamav Wed May 16 10:46:43 2007 -> ERROR: Unable to open file or directory Wed May 16 10:46:43 2007 -> +++ Started at Wed May 16 10:46:43 2007 Wed May 16 10:46:43 2007 -> clamd daemon 0.90.2 (OS: linux-gnu, ARCH: i386, CPU: i386) Wed May 16 10:46:43 2007 -> Log file size limit disabled. Wed May 16 10:46:43 2007 -> Reading databases from /var/clamav Wed May 16 10:46:43 2007 -> ERROR: Unable to open file or directory This happens with clamav-0.90. I am ruuning clamav-0.88 on CentOS 4.4. It works fine. below are RPMS I installed on CENTOS 4.4 [root@netmonitor ~]# rpm -qa |grep clam clamav-0.88.7-1.el4.rf clamd-0.88.7-1.el4.rf clamav-db-0.88.7-1.el4.rf I tried a lot to solve this issue. But still have not been able to solve. Help needed. -- Thank you Indunil Jayasooriya

3 4

a2ps bug in 4.5?
by Henk van Lingen 23 May '07

23 May '07

Hi, My desktops which have gone from 4.4 tot 4.5 (i386) have a problem with a2ps. 'a2ps file.txt' dumps to the terminal instead of to the printer. 'a2ps -P printername file.txt' dumps to a file 'printername' 'lpr' still seems to work correctly. Any ideas about what can cause this? Regards, -- Henk van Lingen, Systems Administrator & DBA (o- -+ Dept. of Computer Science, Utrecht University. /\ | phone: +31-30-2534107 v_/_ http://henk.vanlingen.net/ http://www.tuxtown.net/netiquette/

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss