Discuss

discuss@lists.centos.org

34758 discussions

Deployment Guide in french?
by Niki Kovacs 25 May '07

25 May '07

Hi, I have CentOS 5 installed, and I'd like to read the RHEL 5 Deployment Guide in french. The online version seems to be available in english only. There's an RPM package on my system: # rpm -qa | grep -i depl Deployment_Guide-fr-FR-5.0.0-19.el5.centos Deployment_Guide-en-US-5.0.0-19.el5.centos Now what does the package consist of? 'rpm -ql' on the package shows a series of .xml files in /usr/share/doc/Deployment_Guide-fr-FR-*. Question: how do I access these? My GNOME desktop is in french OK. Only when I access the help browser via 'Système -> Documentation -> Enterprise Linux Deployment Guide', I get access to the english version, but the french version is nowhere to be found. Any suggestions? Niki -- Dyslexics have more fnu.

2 3

dcc error on centos 5
by Indunil Jayasooriya 25 May '07

25 May '07

Hi, I set up DCC on CentOS 5 with Dual Sendmail - Amavisd-new and and Spam assassin. I installed DCC from AT rpms. pls see below for installed DCC rpm. [root@mailgw ~]# rpm -qa |grep DCC DCC-1.3.50-16.0.el5 Then, I configured in Deamon mode. I did below steps. [root@mailgw ~]# yum install DCC then, [root@mailgw ~]# cdcc "delete 127.0.0.1" [root@mailgw ~]# cdcc "delete 127.0.0.1 Greylist" then, edited /etc/dcc/dcc_conf [root@mailgw ~]# vi /etc/dcc/dcc_conf I changed DCCIFD_ENABLE=off to DCCIFD_ENABLE=on then, [root@mailgw ~]# cp /usr/libexec/dcc/rcDCC /etc/rc.d/init.d/ [root@mailgw ~]# chkconfig rcDCC on And finally,I edited SpamAssassin's configuration file, and tell it where to find the path to DCC: vi /etc/mail/spamassassin/local.cf Add this to the end of the file: dcc_home /usr/libexec/dcc then, Edit the file v310.pre: vi /etc/mail/spamassassin/v310.pre I changed #loadplugin Mail::SpamAssassin::Plugin::DCC to ( I removed the # mark) loadplugin Mail::SpamAssassin::Plugin::DCC then, [root@mailgw ~]# /etc/init.d/spamassassin restart Stopping spamd: [ OK ] Starting spamd: [ OK ] then, [root@mailgw ~]# /etc/init.d/rcDCC start Then, I checked logs, It gives below erros. May 25 13:31:51 mailgw dccm[30935]: setpgid(): Permission denied May 25 13:31:51 mailgw dccm[30935]: 1.3.50 listening to /var/run/dcc/dccm with /etc/dcc May 25 13:31:51 mailgw dccm[30935]: DCC: Unable to bind to port /var/run/dcc/dccm: Address already in use May 25 13:31:51 mailgw dccm[30935]: DCC: Unable to create listening socket on conn /var/run/dcc/dccm May 25 13:31:51 mailgw dccm[30935]: 1.3.50 detected 0 spam, ignored for 0, rejected for 0, and discarded for 0 targets among 0 total messages for 0 targets since 05/25/07 13:31:51 May 25 13:31:51 mailgw dccm[30935]: smfi_main() = -1 May 25 13:31:51 mailgw dccifd[30950]: setpgid(): Permission denied May 25 13:31:51 mailgw dccifd[30950]: 1.3.50 listening to /etc/dcc/dccifd Can you solve this issue? Then, I disabled selinux as below [root@mailgw ~]# setenforce 0 Then, I started DCC service again, [root@mailgw ~]# /etc/init.d/rcDCC start Then It gave no erros. pls see below. [root@mailgw dcc]# tail -f /var/log/maillog May 25 13:35:05 mailgw dccm[31026]: 1.3.50 listening to /var/run/dcc/dccm with /etc/dcc May 25 13:35:05 mailgw dccifd[31041]: 1.3.50 listening to /etc/dcc/dccifd I do not want to leave selinux disabled. So could you pls help me to solve this? -- Thank you Indunil Jayasooriya

1 0

Update, now can't unlock
by Peter Crighton 25 May '07

25 May '07

I started a yum update this afternoon and there were lots of updates (182) so I presume it's the 4.5 update. Now I can't unlock the session with my password! Any ideas? (no caps lock is not on!) -- Peter Crighton

7 6

OT: Racoon with virtual ip (roadwarrior client)
by carlopmart 24 May '07

24 May '07

Hi all, Somebody can explains me how can I configure ipsec-tools package to use private virtual ip address as an openswan does or some doc/howto about it?? I have seen this howto, but doesn't works for me: http://www.howtoforge.com/racoon_roadwarrior_vpn Many thanks. -- CL Martinez carlopmart {at} gmail {d0t} com

4 9

recompiling kernel results in error: .../linux-2.6.18.i686/arch//Makefile: No such file or directory
by dcw 24 May '07

24 May '07

I have installed CentOS 5 with all updates. Also I have 2 ne2000 isa cards. In recompiling the kernel, I have been trying to follow the instructions on this URL: http://wiki.centos.org/HowTos/Custom_Kernel The complete error message I get is: Makefile:403: /home/cs/redhat/BUILD/kernel-2.6.18/linux-2.6.18.i686/arch//Makefile: No such file or directory I have the following kernel and rpm packages installed: kernel-2.6.18-8.1.4.el5 kernel-headers-2.6.18-8.1.4.el5 kernel-devel-2.6.18-8.1.4.el5 rpm-devel-4.4.2-37.el5 rpm-4.4.2-37.el5 rpm-python-4.4.2-37.el5 redhat-rpm-config-8.0.45-17.el5.centos rpm-build-4.4.2-37.el5 rpm-libs-4.4.2-37.el5 uname -r gives 2.6.18-8.1.4.el5 The .rpmmacros file has the following: %_topdir /home/cs/redhat %packager cs <dwoody1(a)charter.net> The script I am using from a user login is: rpm -i /home/packages/kernel-2.6.18-8.1.4.el5.src.rpm rpmbuild -bp --target=`uname -m` kernel-2.6.spec cd /home/cs/redhat/BUILD/kernel-2.6.18/linux-2.6.18.`uname -m` cp /home/cs/redhat/SOURCES/kernel-2.6.18-`uname -m`.config .config # enter 'y' for isapnp, isa and 'm' for ne2000 support make xconfig cp .config /home/cs/redhat/SOURCES/kernel-2.6.18-`uname -m`.config cd /home/cs/redhat/SPECS # change the release to: # %define release 8.1.4.1.ne2000%{?dist} vi kernel-2.6.spec cd /home/cs/redhat/SPECS rpmbuild -ba --target=`uname -m` kernel-2.6.spec After the patches are applied during the last rpmbuild command I get the error message at the top of this email. Searching the web has not provided any useful information. According to the documentation in make xconfig, isa and isapnp support have to be compiled into the kernel. I know that I have either not set a parameter, doing commands in the wrong order or I have missed a step, but I have not been able to determine what. I have even tried to change the order of the commands without luck. Any help will be greatly appreciated, David

16 56

fonts on centos 4 and 5
by Jerry Geis 24 May '07

24 May '07

I am running centos 4.x and 5 x86_64 and using the script below and the slider bar at the bottom I cannot get fonts bigger than 50. someone else posted a followup and said he has the same issue. What can be happening here??? xlsfonts shows that bigger fonts are available. How can I get bigger fonts??? Note - I had to do a "yum install tk" also... Thanks, Jerry --------------------------------- #!/usr/bin/wish proc updateText {args} { set text [.c1 find withtag text] foreach {name size type} [.c1 itemcget $text -font] {break} set font [list $name $::value $type] .c1 itemconfigure $text -font $font } set c [canvas .c1 -width 800 -height 600 -bg white] set s [scale .s1 -from 5 -to 200 -orient horizontal -var ::value -length 400] set text [$c create text 400 300 -text "Test" -anchor c -fill red -tag text -font Helvetica] trace variable ::value w updateText pack $c $s

4 5

csgfs packages
by Jan Koop 24 May '07

24 May '07

Hi, is there anything happening to the csgfs repo ? The packages in there are extremely old. At least for CentOS 4.5 Kernels there should be an update. I would like to help package them if possible. I use them in production and need up to date packages so I can update to 4.5. There's already a bug report (#0002017): http://bugs.centos.org/view.php?id=2017 Bye, Jan

1 0

What host based ids is available in centos repositories?
by Erick Perez 24 May '07

24 May '07

What host based ids is available in centos repositories? the i can install with yum install package? -- ------------------------------------------------------------ Erick Perez Panama Sistemas Integradores de Telefonia IP y Soluciones Para Centros de Datos Panama, Republica de Panama Cel Panama. +(507) 6694-4780 ------------------------------------------------------------

3 3

4.5 upgrades on production servers?
by Abba Communications 24 May '07

24 May '07

Anyone besides me totally throw (most) caution into the wind and yum update any mission critical production 4.x boxen to 4.5 without any problems? 8-p - rh -- Abba Communications Spokane, WA www.abbacomm.net

13 21

Re: [CentOS] Simple Install of x86_64 CentOS 5 is failing
by David G. Miller 24 May '07

24 May '07

"James Olin Oden" <james.oden(a)gmail.com> wrote: > It gets all the way through the install, and then when it reboots, > grub can't find the kernel. Grub can't find the kernel because the > kernel was not instaled for some reason? I looked at the box through > rescue mode and in /boot there is no kernel. > > Any ideas what might have happened? > > Cheers...james Nice clean x86_64 install here: [dave@spindle ~]# uname -a Linux spindle.local.davenjudy.org 2.6.21.1 #1 SMP Wed May 16 21:19:02 MDT 2007 x86_64 x86_64 x86_64 GNU/Linux [dave@spindle ~]# cat /etc/redhat-release CentOS release 5 (Final) [dave@spindle ~]# cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 15 model name : AMD Athlon(tm) 64 Processor 3500+ stepping : 0 cpu MHz : 1000.000 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext 3dnow up bogomips : 1995.39 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp This is on a HP Pavilion zv6015us laptop. The only problem I has was getting the wireless working. Loading bcm43xx froze the system. I went back to ndiswrapper which had a less dramatic stability problem that went away with the 1.43 version. I also went to the current kernel from kernel.org since that way the laptop's SD card reader works. Cheers, Dave -- Politics, n. Strife of interests masquerading as a contest of principles. -- Ambrose Bierce

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss