Discuss

discuss@lists.centos.org

34753 discussions

Start a nNew thread

4.5 Version
by Frank Büttner 08 May '07

08 May '07

Are there an release date for 4.5? Frank

10 13

Centos 5 and blutooth mouse
by Jerry Geis 08 May '07

08 May '07

I have an hp dv9000 laptop with centos 5. everything is working except my bluetooth mouse... I go up to the icon (upper right) for bluetooth, right click on it, click the discoverable icon, then click the discoverable button on my mouse - ----- and nothing. Nothing pops up with a pin number for the mouse, nothing happens at all... Does this not work? What might I be missing. Jerry

1 0

adsl-setup (compaq presario sr5010nx)
by gary 08 May '07

08 May '07

> I just bought a new cheap compaq presario sr5010nx and so far > have been unable to get my dsl up and running on Centos5. > pppoeconf on Ubuntu works just fine -- same machine -- same > harddrive. > > I've run adsl-setup and system-config-network? (separately) > numerous times without success. > > So far I suspect a missing driver but suppose it could also be a > detection issue. > > Suggestions or workarounds appreciated. ----gary > Alex White wrote: > What kind of dsl modem do you have? Is it a speedstream of some > sort or is it a 2wire variant? > What is the contents of /etc/ppp/pppoe.conf > The newer speedstream modems (if you can call them that) can retain > credentials. Have you tried connecting to it and seeing what > settings are in there? > Do you have /etc/sysconfig/network-scripts/ifcfg-ppp0 ? What is the > contents of that file? Have you tried a simple 'ifconfig ppp0 up'? > Try seeing the settings of your config via the main menu System > > Administration > Network. > Try this as well 'system-config-network' What does it mention (if>anything) about ppp0? > HTH > Alex White Alex - The Alcatel Speed Touch Home modem worked just fine with Centos5 on a different machine. Trying to activate sytem-config-network gives the following: /sbin/adsl-start: line 214: 3132 Terminated $CONNECT"$@" >/dev/null 2>&1 I have no /etc/ppp/pppoe.conf - not installed - having run adsl-setup after a fresh reinstall. /etc/sysconfig/network-scripts/ifcfg-ppp0: USERCTL=yes BOOTPROTO=dialup NAME=DSLppp0 DEVICE=ppp0 TYPE=xDSL ONBOOT=yes PIDFILE=/var/run/pppoe-adsl.pid FIREWALL=STANDALONE PING=. PPPOE_TIMEOUT=80 LCP_FAILURE=3 LCP_INTERVAL=20 CLAMPMSS=1412 CONNECT_POLL=6 CONNECT_TIMEOUT=60 DEFROUTE=yes SYNCHRONOUS=no ETH=eth0 PROVIDER=DSLppp0 USER=garys(a)mtaonline.net PEERDNS=no DEMAND=no I'll tinker with some these values and hope for success. ----gary

2 2

Raid5 issues
by Ruslan Sivak 08 May '07

08 May '07

So when I couldn't get the raid10 to work, I decided to do raid5. Everything installed and looked good. I left it overnight to rebuild the array, and when I came in this morning, everything was frozen. Upon reboot, it said that 2 of the 4 devices for the raid5 array failed. Luckily, I didn't have any data on it, but how do I know that the same thing won't happen when I have real data on it? I kind of feel that the problem might be that I'm using SATA drives, and they probably tried to self-correct and error and took too long, and the raid controller assumed that it was a bad drive, and took it out of the array. The question is, is there anything I can do about it? Russ

8 36

Installing from a custom kernel
by Ruslan Sivak 08 May '07

08 May '07

Since the built in kernel doesn't have the raid10 module for some reason, I would like to custom compile a kernel that does, and install with it. How would I go about doing this? Russ

6 7

wget not in minimal install
by MrKiwi 08 May '07

08 May '07

Hi All, I used to always do a minimal install with v4.4, and wget (and other tools) was included. With v5 if i untick *everything* in the installation (incl "base") so that i can install from 1 cd, wget is not included. I couldn't make sense of any of the xml or xml.gz files on the installation cd. (/dev/cdrom/repodata/*), although they do mention wget as 'default' rather than 'mandatory' in one of the files. Which option should i tick to get wget? or should i just use a kickstart install and throw yum -y install wget dos2unix in the postinstall section? MrKiwi,

2 2

CentOS 5: GDM starts, but console doesn't switch VTs
by Bart Schaefer 07 May '07

07 May '07

(2nd attempt, the mailing list is still bouncing some gmail SMTP servers because of the multihop DSBL.) Over the weekend I installed CentOS 5 on my hp pavilion ze5300. The graphical install went just fine, and everything (except wireless, haven't worked on that yet) seems to be working. However, on boot, the text console comes up. If I hit Alt-F7 manually, I'm switched to the graphical GDM login, and that logs me in to a Gnome session as usual -- but the console never automatically switches over to the GDM virtual terminal, as far as I can tell. Is anyone else experiencing this? It may be that this happens only with the Xen kernel and has something to do with rhgb itself switching into text mode because of the microcode module installation failure that has been discussed elsewhere.

1 0

Zimbra MTA and Contact package?
by John Plemons 07 May '07

07 May '07

Does anyone have any feedback on the Zimbra MTA and Contact software? I just saw that Comcast is going to start using the software, I played with it over a year ago and dumped it. It seems to have been developed much further and works, open source and compiled for RedHat 4 Enterprise. Any feedback would be helpful... Thanks, john

2 1

runuser: /dev/null permission denied when init script is run via service
by Karel Rank 07 May '07

07 May '07

Hi, I have problem with runuser utility and permission to /dev/null. runuser is called from init script. When init script is run /etc/init.d/callrec start, then there are no problems with permissions, but when init script is called via service callrec start. Then runuser starts complaining about permissions. runuser: /dev/null: Permission denied What is strange is that I do not redirect to /dev/null anywhere. Permissions to /dev/null are: crw-rw-rw- 1 root root 1, 3 Apr 16 16:39 /dev/null The difference between calling init script from command line and from service tool is that service calls script as parameter of env env -i LANG=en_US.UTF-8 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin TERM=xterm /etc/init.d/callrec start CentOS is 4.3. Can somebody explain me where the problem is? Regards, Karel Rank

2 1

adsl-setup (compaq presario sr5010nx)
by gary 07 May '07

07 May '07

I just bought a new cheap compaq presario sr5010nx and so far have been unable to get my dsl up and running on Centos5. pppoeconf on Ubuntu works just fine -- same machine -- same harddrive. I've run adsl-setup and system-config-network? (separately) numerous times without success. So far I suspect a missing driver but suppose it could also be a detection issue. Suggestions or workarounds appreciated. ----gary

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss