Discuss

discuss@lists.centos.org

34753 discussions

selinux problem with squid and snmp_port in centos 5
by net foss 20 Apr '07

20 Apr '07

Hi all, Just want to enable squid's SNMP support to get information about its perfomance through snmp client. I set "snmp_port 3401" in squid.conf SELinux is in enforcing state with targeted policy. But squid daemon doesn't start. There are some messages in audit.log like type=SYSCALL msg=audit(1176946812.492:244): arch=40000003 syscall=102 success=no exit=-13 a0=2 a1=bf880060 a2=81109f0 a3=bf88007c items=0 ppid=15684 pid=15705 auid=500 uid=23 gid=23 euid=0 suid=0 fsuid=0 egid=23 sgid=23 fsgid=23 tty=(none) comm="squid" exe="/usr/sbin/squid" subj=user_u:system_r:squid_t:s0 key=(null) Note that squid can run if I make one of two following changes 1) switch selinux to permissive (setenfoce 0), and keep snmp_port 3401 in squid.conf 2) keep selinux in enforcing state, and disable snmp_port in squid.conf This problem happens in CentOS 5. The same configuration (i.e. selinux enforcing, and snmp_port 3401) works well in 4.4. Any hint to solve the problem is appreciated. -- NetFOSS netfoss(a)gmail.com

3 3

tomcat
by CentOS List 19 Apr '07

19 Apr '07

Hi, I had installed java via yum and would like to run jbilling application and got an error. run.sh: Missing file: /lib/tools.jar run.sh: Unexpected results may occur. Make sure JAVA_HOME points to a JDK and not a JRE. How can i check where is the JAVA_HOME? regards

5 10

WPA Radius wireless authentication and CentOS 5
by David G. Miller 19 Apr '07

19 Apr '07

I previously had WPA radius authentication working from my laptop to my home network with the laptop running Fedora Core 6 and the server running freeRadius under CentOS 4.4 (freeradius-1.0.1-3.RHEL4.3). I'm attempting to move my FC 6 boxes to CentOS 5 so I decided to pick on the laptop first. Unfortunately, I neglected to backup /etc before doing the CentOS 5 install (bad Dave, bad Dave) so I don't have my previously working configuration for reference. I attempted to follow the instructions at: http://www.linuxjournal.com/article/8017 http://www.linuxjournal.com/article/8095 http://www.linuxjournal.com/article/8151 that I had previously used to get the laptop authenticating with FC6. All I can ever get the radius server to spew is: ... (lots of normal looking stuff) ... rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP NAK rlm_eap: NAK asked for bad type 0 rlm_eap: Failed in EAP select modcall[authenticate]: module "eap" returns invalid for request 1 modcall: group authenticate returns invalid for request 1 auth: Failed to validate the user. Login incorrect: [spindle/<no User-Password attribute>] (from client Wireless-client port 4 cli 00904bac8f67) Delaying request 1 for 1 seconds Finished request 1 Going to the next request ... As per the referenced articles, for the client I have cert.pem as the certificate file, key.pem as the key file, keycert.pem as the combined key and certificate file and ca.pem as the server certificate file. I've tried all the combinations of the certificate and key files I can think of through NetworkManager and the best I get is the above NAK. Everything works with either an open AP (*REALLY* bad idea) or using WPA with a pre-shared key. I'd like to get WPA radius working again. Any suggestions (other articles to follow, a howto, how to get free radius to tell me what's wrong, whatever) would be appreciated. Thanks, Dave -- Politics, n. Strife of interests masquerading as a contest of principles. -- Ambrose Bierce

1 0

JPackage, Java 1.5.0, and CentOS 5?
by Benjamin J. Weiss 19 Apr '07

19 Apr '07

Hey, y'all. I don't know how many folks here are familiar with a blogging program called 'pebble' http://pebble.sourceforge.net, but it's *supposed* to be an easy drop-in to a tomcat5 container. I suppose that it is, once I figured out how to get tomcat 5 working in CentOS 5, but I'm still having problems with the java. CentOS comes with Java 1.4.2, but I need Java 1.5 in order to run pebble. I've tried to use jpackage by downloading the jpackage.repo and doing yum searches, but it looks like jpackage doesn't have RHEL 5 support. I tried downloading and installing the SDK from Sun, but I must have done that wrong because it broke a lot of other things. Has anybody got any ideas? Thanks! Ben

2 1

Mime Type in Nautilus
by Bernard Lheureux 19 Apr '07

19 Apr '07

Hi All... Could someone guide me to solve a strange behaviour of Nautilus, when I want to click on a JPEG file that has a .jpg extension I receive this message and eod refuses to launch: >=-=-=-=-=-=-=-=-=-=-=-=-=-=-8<-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Cannot open Cactus -'Ot 'N' Sweaty(1972)_back.jpg The filename "Cactus -'Ot 'N' Sweaty(1972)_back.jpg" indicates that this file is of type "jpg document". The contents of the file indicate that the file is of type "JPEG image". If you open this file, the file might present a security risk to your system. Do not open the file unless you created the file yourself, or received the file from a trusted source. To open the file, rename the file to the correct extension for "JPEG image", then open the file normally. Alternatively, use the Open With menu to choose a specific application for the file. >=-=-=-=-=-=-=-=-=-=-=-=-=-=-8<-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= In the pas, my machine was running in FC4 and everything worked correctly, now it refuses to open this kind of files unless I rename it to .jpeg extension... Thanks if you can guide me on how to solve this to open eog to view this type of file... M$-Internet Exploder est le cancer de l'Internet, voyez pourquoi ici : --> http://www.decroissance.info/Ateliers-Liberez-votre-ordinateur <-- Et plus vous éviterez les produits Micro$oft, plus libres vous serez : -------------> http://libre-fan.apinc.org/article21.html <------------ -- (°- Bernard Lheureux Gestionnaire des MailingLists ML, TechML, LinuxML //\ http://www.bbsoft4.org/Mailinglists.htm ** MailTo:root@bbsoft4.org v_/_ http://www.bbsoft4.org/ <<<<<< * >>>>>> http://www.portalinux.org/

1 1

CentOS 5 - Gnome
by Drew Weaver 19 Apr '07

19 Apr '07

Hi there I am just writing to find out if anyone else had an issue installing CentOS 5 on an inspiron notebook. If I choose Desktop - Gnome in the distribution selection, after the "transferring image to hard disk" message it waits a very long time than dies with an error about not being able to run the transaction due to the following error: Press enter to reboot. I am able to install (in text mode) the 'server' option. But I would really like to install the desktop environment on my laptop. Thank you in advance. -Drew

7 14

CentOS 5 sound problems on ICH5
by Jon Jahren 19 Apr '07

19 Apr '07

Hi I have installed CentOS 5 on my computer which has an Intel ICH5 sound chip. The card appears as it should, and I can adjust the volume just fine. However, when I try to play a sound file(.ogg for instance), rhythmbox plays through the file, but no sound is heard. I've tried as root, and I've tried doing cat /dev/urandom > /dev/dsp, and it's all quiet. Output from lspci: 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) I've tried a reboot, I've tried restarting the sound system from system-config-soundcard, but nothing seems to work. Any suggestions please? Kind Regards Jon Jahren

4 9

linuxthreads & Printers in Centos5...
by Jake Grimmett 19 Apr '07

19 Apr '07

Pierre, many thanks for your help. I think I might need a compat-glibc for the "n-2 distro" as linuxthreads support was removed from Centos5; from the RHEL-4 release-notes: "support for LinuxThreads still exists for RHEL 4, ...advance notice that Red Hat Enterprise Linux 5 will no longer include support for LinuxThreads. Thus applications that require LinuxThreads support must be updated before they will be able to work properly on a Red Hat Enterprise Linux 5 system." In RHEL4 the solution was to one of the following: 1) Use LD_ASSUME_KERNEL environment variable or 2) Use an explicit rpath to /lib/i686/ or /lib/ to select LinuxThreads instead of NPTL at runtime I used solution #1 to get InsightII to run under Centos4. Is there any (reasonable) chance of providing older (=Centos3) libraries under Centos5 for one errant program? Thanks again for your time Jake Pierre Bourgin wrote: >Depends which older version you need; the compat-glibc package provides >binary compatibility with the n-1 distro: >Jake Grimmett wrote: >> 1) Some of our software needs linuxthreads (i.e. InsightII) but it's closed >> source and the writers (Accelrys) are unlikely to respin the code as they >> want us to move to a different program. -- Dr J. Grimmett Computer Systems Manager Division of Molecular Structure National Institute for Medical Research The Ridgeway Mill Hill London, NW7 1AA

2 1

linuxthreads & Printers in Centos5...
by Jake Grimmett 19 Apr '07

19 Apr '07

Dear All, Firstly, many thanks for the hard work put in by the development team :) Now I have a couple of problems, any help welcome: 1) Some of our software needs linuxthreads (i.e. InsightII) but it's closed source and the writers (Accelrys) are unlikely to respin the code as they want us to move to a different program. Is there any way of installing another set of glibc libs on centos 5, to allow an old, broken, but uselful program to run? 2) As part of my setup script for centos 4, I add a large list of printers to each workstation by using system-config-printer-tui --Ximport < settings.xml (on my master machine I create the list with system-config-printer-tui --Xexport > settings.xml ) Is there any easy way of automatically adding 15 printers to Centos 5 ? My thanks for your time, Jake -- Dr J. Grimmett Computer Systems Manager Division of Molecular Structure National Institute for Medical Research The Ridgeway Mill Hill London, NW7 1AA

4 3

Centos 4.4 or 5 and HP Proliant network card teaming function
by Erick Perez 19 Apr '07

19 Apr '07

Hi, has anyone enabled using centos, the proliant functionality of "teaming" the two integrated network cards, to be seen as one by the network switch? This is available in a nice GUI in windows. but i have no idea how to do that on linux. -- ------------------------------------------------------------ Erick Perez Panama Sistemas Integradores de Telefonia IP y Soluciones Para Centros de Datos Panama, Republica de Panama Cel Panama. +(507) 6694-4780 ------------------------------------------------------------

2 2

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss