Discuss

discuss@lists.centos.org

34758 discussions

Centos 4.4 perl modules. where are they?
by Erick Perez 27 Jan '07

27 Jan '07

I need to install VICIDIAL (cause is a free outbound call solution) and vicidial wants the following perl modules: MD5 Digest::MD5 Digest::SHA1 readline Bundle::CPAN DBI (found the rpm perl-DBI) DBD::mysql (found the RPM perl-DBD-Mysql) Net::Telnet Time::HiRes Net::Server OLE::Storage_Lite Spreadsheet::ParseExcel I do not want to taint the installation if an RPM is available on the DVD or in centos extras/plus. How can I check what RPM will provide such perl modules? thanks in advance. -- ------------------------------------------------------------ Erick Perez Panama Sistemas Integradores de Telefonia IP y Soluciones Para Centros de Datos Panama, Republica de Panama Cel Panama. +(507) 6694-4780 ------------------------------------------------------------

3 2

RE: [CentOS] Problems with building a complete kernel
by Mark Hull-Richter 27 Jan '07

27 Jan '07

I haven't actually made any changes to the kernel yet - I need a working build, hopefully one that matches my current installation, but a working build to start. (Otherwise I won't know if the kernel I'm running and one I've modified contain anything I don't know about....) I used the config that the installed version had as my base, and I don't think I changed anything. I ran make menuconfig and set the version to something different, then ran make oldconfig to see what changes were needed (none), then built. In theory, if lvm support was in the installed kernel, it should have built into my new one, right? I'll be making a minor mod to xfs first, then there's a device driver we want to add (I think). I got a ton of "attempt to assign to nonexistent symbol" notices after exiting make menuconfig - I'm assuming that these are harmless. Thanks again. -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Jim Perrin Sent: Friday, January 26, 2007 3:47 PM To: CentOS mailing list Subject: Re: [CentOS] Problems with building a complete kernel On 1/26/07, Mark Hull-Richter <mhull-richter(a)datallegro.com> wrote: > My bad - I rechecked and it is the correct source. AND I found that the > make install (with make modules_install first) takes care of GRUB for > me. > > BUT: > > Now I can't boot because the installed Centos 4.4 was from the > distribution DVD, and it depends on the lvm to load. My build doesn't > know about the lvm and it refuses to boot - it dies coming up with an > error from lvm, followed by two more where it can't find a file system, > then the kernel panics (and hangs the machine). > > How do I get around lvm? Build your kernel with lvm support. It sounds like you're changing far more than you need to in the config. If you follow the how-to on the centos wiki, you'd only be changing the things you need to, and all else will stay the same. This keeps you from running into things like you're experiencing. Again, are you certain you need to rebuild? What feature is it that you need? -- During times of universal deceit, telling the truth becomes a revolutionary act. George Orwell _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

officejet 7310
by Jerry Geis 27 Jan '07

27 Jan '07

Has anyone gotten centos 4 to print on an officejet 7310? I have tried jetdirect with pcl and postcript no go... I have tried smb but it does seem to be browsable as its not listed and when I specify I enter the IP address for server and I dont know what the share is. Windows XP connects and prints fine. THanks, Jerry

3 2

Installing DCC on CentOS 4.4
by Indunil Jayasooriya 27 Jan '07

27 Jan '07

Hi, I want to install dcc on CentOS 4.4 as I am ruunig Dual-Sendmail with amavisd-new. I am looking for DCC RPM pkg. I searchrd bit I could not find any RPM pkg. Pls help me to find DCC RPM pkg. Have you installed DCC on CentOS 4.4. then Pls guide me. -- Thank you Indunil Jayasooriya

4 4

Microsoft makes hard call for input
by kenkensmile＠netscape.net 27 Jan '07

27 Jan '07

hi all, you might be interested in this article. cheers, joe A Sydney software engineer has been embroiled in a controversy in which Microsoft stands accused of trying to use him as a paid proxy to finesse entries on the Wikipedia site. Doug Mahugh, Microsoft "technical evangelist", emailed the engineer, Rick Jelliffe, on Monday, hoping to use Mr Jelliffe's expertise to modify a number of technical articles in the online encyclopedia. Mr Jelliffe holds an economics degree from the University of Sydney and is chief technical officer at Topologi, a Pyrmont software company. But the Microsoft approach has been interpreted as an attempt to disguise its hand in the editing process. Wikipedia allows anyone to add to and modify articles, and relies on volunteer moderators to correct inaccuracies. But Microsoft has rejected suggestions it was being sneaky or underhanded by approaching Mr Jelliffe. In the email to Mr Jelliffe, which Mr Mahugh has since published online, Mr Jelliffe was asked if he would be interested in correcting "errors" and "slanted language" found in Wikipedia entries relating to rival computer software standards, one of which was developed by Microsoft. The email encouraged Mr Jelliffe to disclose his deal with Microsoft in his blog, and reassured him that Microsoft did not have to approve any of the Wikipedia edits before they were made. Mr Jelliffe's disclosure of the offer on his blog sparked a flurry of criticism. He denied he was pro-Microsoft. "Full disclosure was part of the deal! I wouldn't have been interested otherwise," he wrote. Mr Jelliffe has refused to add to his published comments. A Microsoft spokeswoman, Catherine Brooker, said no money had changed hands, but did not say whether the contract had been withdrawn. source http://www.theage.com.au/news/biztech/microsoft-makes-hard-call-for-input/2… ________________________________________________________________________ Check Out the new free AIM(R) Mail -- 2 GB of storage and industry-leading spam and email virus protection.

2 1

RE: [CentOS] Problems with building a complete kernel
by Mark Hull-Richter 27 Jan '07

27 Jan '07

My bad - I rechecked and it is the correct source. AND I found that the make install (with make modules_install first) takes care of GRUB for me. BUT: Now I can't boot because the installed Centos 4.4 was from the distribution DVD, and it depends on the lvm to load. My build doesn't know about the lvm and it refuses to boot - it dies coming up with an error from lvm, followed by two more where it can't find a file system, then the kernel panics (and hangs the machine). How do I get around lvm? Thanks (again). -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Will McDonald Sent: Thursday, January 25, 2007 4:21 PM To: CentOS mailing list Subject: Re: [CentOS] Problems with building a complete kernel On 26/01/07, Mark Hull-Richter <mhull-richter(a)datallegro.com> wrote: > Thanks - I'm still working on it. > > Does anyone know where there is a clean, working source for Centos > 2.6.9-42.0.3 (supposedly the 4.4 final)? I'm pretty sure the one I have > is NOT the right one.... The source tarball should be included in the SRPM for your kernel, I'd imagine. http://mirror.centos.org/centos-4/4.4/updates/SRPMS/kernel-2.6.9-42.0.3. EL.src.rpm Once installed (if installed as root) it'll be in /usr/src/redhat/SOURCES, otherwise it'll be in wherever your .rpmmacros file points. Will. _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

Setting up HP OfficeJet 5610 fax on CentOS 4.4 shared
by Rakhesh Sasidharan 26 Jan '07

26 Jan '07

Hi there, As the subject says, I'm trying to set up an HP OfficeJet 5610 on CentOS 4.4 for shared use across my machines. I've managed to get printing (through HPLIP/ CUPS/ SAMBA) and scanning (through SANE) shared; but I'm unable to get fax shared working. Is it possible to do that? The instructions on the HPLIP page talk about installing the 5610 as a fax device and then faxing using hp-sendfax and hp-toolbox etc. But what I want to do is to share the fax device itself on the network -- like the printer and scanner -- any ideas on how I can achieve that? Thanks, Rakhesh ps. I am using CentOS-server. No GUI etc. So would prefer CLI oriented solutions. Thanks.

2 1

oom killer: gfp=mask=0xd1 - bug w/ EM64T?
by Lance Lierheimer 26 Jan '07

26 Jan '07

Hi - Running into the error below when copying over large files via ssh. This occurs even when I have vm.overcommit_memory=2 set in /etc/sysctl.conf. The research I've done indicates that this is a bio-uses-GFP_DMA bug with EM64T. I'm running CentOS 4.4 with the 2.6.9-42.0.3.ELsmp x86_64 kernel on the following hardware: 2 x Intel Xeon CPU 5148 @ 2.33GHz Supermicro X7DB8 motherboard Is there a patch or workaround for this, or some parameter that I can pass to the kernel at boot? Any help would be appreciated. thanks, Lance ***** oom-killer: gfp_mask=0xd1 Mem-info Node 0 DMA per-cpu: cpu 0 hot: low 2, high 6, batch 1 cpu 0 cold: low 0, high 2, batch 1 cpu 1 hot: low 2, high 6, batch 1 cpu 1 cold: low 0, high 2, batch 1 cpu 2 hot: low 2, high 6, batch 1 cpu 2 cold: low 0, high 2, batch 1 cpu 3 hot: low 2, high 6, batch 1 cpu 3 cold: low 0, high 2, batch 1 Node 0 Normal per-cpu: cpu 0 hot: low 32, high 96, batch 16 cpu 0 cold: low 0, high 32, batch 16 cpu 1 hot: low 32, high 96, batch 16 cpu 1 cold: low 0, high 32, batch 16 cpu 2 hot: low 32, high 96, batch 16 cpu 2 cold: low 0, high 32, batch 16 cpu 3 hot: low 32, high 96, batch 16 cpu 3 cold: low 0, high 32, batch 16 Node 0 HighMem per-cpu: empty Free pages: 16203544kB (0kB HighMem) Active:6029 inactive:29822 dirty:25578 writeback:1 unstable:0 free:4050886 slab:5003 mapped:4627 pagetables:272 Node 0 DMA free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:16384kB pages_scanned:2 all_unreclaimable? yes protections[]: 0 0 0 Node 0 Normal free:16203608kB min:4216kB low:8432kB high:12648kB active:24116kB inactive:119288kB present:17809408kB pages_scanned:0 all_unreclaimable? no protections[]: 0 0 0 Node 0 HighMem free:0kB min:128kB low:256kB high:384kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no protections[]: 0 0 0 Node 0 DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB Node 0 Normal: 1412*4kB 611*8kB 189*16kB 219*32kB 106*64kB 15*128kB 1*256kB 0*512kB 1*1024kB 1*2048kB 3948*4096kB = 16203608kB Node 0 HighMem: empty Swap cache: add 0, delete 0, find 0/0, race 0+0 Free swap: 16450552kB 4456448 pages of RAM 353637 reserved pages 97288 pages shared 0 pages swap cached (etc... oom killer kills off other processes) -- Lance Lierheimer Sr. Systems Engineer Greenplum www.greenplum.com lance at greenplum.com

1 0

RE: [CentOS] Limiting files when using rsync
by Mark Schoonover 26 Jan '07

26 Jan '07

Todd Cary wrote: > Mark - > > Thanks! That did it. > > > /usr/bin/rsync -av --exclude=".*" -e ssh /home/ 192.168.0.22:/home/ > My next step will be to brush the dust off of my Perl book and write > a crontab script to backup nightly. > > Question: I may not be using the term "backup" absolutely correctly. > The destination server is a "standby" server. This is if the source > server fails, all I have to do is change the router to point to the > standby server. These are in a home office and I do not consider > myself a system administrator; just someone who knows enough to keep > the server running (it's main task is FTPing). Do you have any > suggestions about using rsync as I am doing? > Todd, If all you want to do is mirror the main server to the backup server, your command is almost correct. You'll want to add --delete on the commandline. This will cause rsync to remove any files from the destination before sending them from the source. This will create a mirror of your main server to your backup server. You don't need to go to all the overhead of running Perl to crontab this up. Just drop your rsync command into a file, make it executable then add it to root's crontab file. It'll run just fine after that. One other thing nonrsync related - top posting, and sending HTML to the list. Makes it hard to respond to your questions. Just remember to use text only, and post responses at the bottom of your emails. Things just tread much easier from top to bottom. Thanks! Mark Schoonover IS Manager American Geotechnical - California, Nevada and Arizona V-> 858.450.4040 F-> 714.685.3909 C-> 858.472.3816 * software development * systems administration * networking * security *

3 2

RE: [CentOS] Limiting files when using rsync
by Mark Schoonover 26 Jan '07

26 Jan '07

Todd Cary wrote: > Mark Schoonover wrote: >> Todd Cary wrote: >> >>> Mark - >>> >>> Thanks! That did it. >>> >>> >>> /usr/bin/rsync -av --exclude=".*" -e ssh /home/ 192.168.0.22:/home/ >>> My next step will be to brush the dust off of my Perl book and write >>> a crontab script to backup nightly. >>> >>> Question: I may not be using the term "backup" absolutely correctly. >>> The destination server is a "standby" server. This is if the source >>> server fails, all I have to do is change the router to point to the >>> standby server. These are in a home office and I do not consider >>> myself a system administrator; just someone who knows enough to keep >>> the server running (it's main task is FTPing). Do you have any >>> suggestions about using rsync as I am doing? >>> >>> >> >> Todd, >> >> If all you want to do is mirror the main server to the backup >> server, your command is almost correct. You'll want to add --delete >> on the commandline. This will cause rsync to remove any files from >> the destination before sending them from the source. This will >> create a mirror of your main server to your backup server. >> >> You don't need to go to all the overhead of running Perl to crontab >> this up. Just drop your rsync command into a file, make it >> executable then add it to root's crontab file. It'll run just fine >> after that. >> >> One other thing nonrsync related - top posting, and sending HTML to >> the list. Makes it hard to respond to your questions. Just remember >> to use text only, and post responses at the bottom of your emails. >> Things just tread much easier from top to bottom. >> >> Thanks! >> >> Mark Schoonover >> IS Manager >> American Geotechnical - California, Nevada and Arizona >> V-> 858.450.4040 F-> 714.685.3909 C-> 858.472.3816 >> * software development * systems administration * networking * >> security * >> >> >> >> >> >> _______________________________________________ >> CentOS mailing list >> CentOS(a)centos.org >> http://lists.centos.org/mailman/listinfo/centos >> >> >> > Mark - > > Yes, the bottom post vs. the top post is a continual problem for me > since my business accounts ask for top post (almost demand it) and > Thunderbird does not have an option for each email address as it does > for email mode. I'll try to remember to swap it back and forth. > > Concerning the --delete switch, if I use it, will files created by a > user on the destination server remain? Though it is a standby server, > there are times when it is used by staff. > > The main reason I will use Perl is to create the backup files of the > Interbase databases and then scp (or rsync) them to the other server. > > Many thanks for the tips.... > > Todd Todd, I understand about top posting issues. I don't do it all the time, especially with coworkers and friends. Since we're the only two in the conversation, we know the history of the email. To someone that's just started reading our thread, everything will be in order, all they have to do is to read from top to bottom. No, the --delete switch will only delete files from the destination server. Now, if the destination server is also having files changed, then rsync is not for you. Rsync is a one way transfer of files, you can't do bidirectional rsync. For that you'll have to use Unison instead. I do the exact same thing with my Mysql servers. I used mysqldump to backup my databases to a directory. Then, using rsync, I copy them all to an offsite backup server. The --excludes option, also has --includes, or better yet, --include-files=filestorsync.txt, then put /home/ /interbasebackups, in that .txt file, one per line. That will tell rsync to grab everything in /home, and /interbasebackups. No need for Perl in this situation. You've really got all the info on the basics of rsync. Now, it's a matter of just creating test scripts, reading the man page, etc. Thanks! Mark Schoonover IS Manager American Geotechnical V: 858-450-4040 - F: 714-685-3909 - C: 858-472-3816 "Stop the Earth!! I want off!!"

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss