Discuss

discuss@lists.centos.org

5 participants
34752 discussions

fedora-usermgmt ?
by Kai Schaetzl 17 Apr '06

17 Apr '06

I was about to install clamav from the dag repo, but added the kbs-CentOS-Extra repo lately. So, there's one as well and I thought I might better get this one since it is rebuilt for CentOS. I'm getting a few confusing dependencies, though. fedora-usermgmt noarch 0.8-1 kbs-CentOS-Extras 7.7 k fedora-usermgmt-setup noarch 0.8-1 kbs-CentOS-Extras 5.7 k fedora-usermgmt-shadow-utils noarch 0.8-1 kbs-CentOS-Extras 6.5 k Which made me think a second time and stop installing. There's no description for fedora-usermgmt. Can I install these three packages without concern? Kai -- Kai Schätzl, Berlin, Germany Get your web at Conactive Internet Services: http://www.conactive.com

2 2

logwatch
by "ΠΑΤΡΙΣ > Τμημα Internet" 17 Apr '06

17 Apr '06

> Have you changed anything during that time? Is this on CentOS-3 or > CentOS-4? ... and what is: > > cat /etc/redhat-release I have the latest release [ CentOS release 4.3 (Final) ] i didn't change anything just the regular updates... ------------------------------ Message: 17 Date: Sat, 15 Apr 2006 12:21:47 +0300 From: "?????? > ????? Internet" <web(a)patris.gr> Subject: [CentOS] logwatch from cronjob To: centos(a)centos.org Message-ID: <4440BB2B.60804(a)patris.gr> Content-Type: text/plain; charset=ISO-8859-7; format=flowed Hello, the last 2-3 days i have a saden problem with logwatch wich i call through a cron job. when i ran the cronjob i get this continues error for the script : ---- Use of uninitialized value in concatenation (.) or string at /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 26062. Use of uninitialized value in concatenation (.) or string at /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 26062. Use of uninitialized value in concatenation (.) or string at /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 26062. ...... Use of uninitialized value in concatenation (.) or string at /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 27432. Use of uninitialized value in concatenation (.) or string at /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 27433. Use of uninitialized value in concatenation (.) or string at /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 27433. Use of uninitialized value in concatenation (.) or string at /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 27433. Use of uninitialized value in concatenation (.) or string at /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 27434. -------- before that logwatch was working perfect any ideas ? ------------------------------ Message: 18 Date: Sat, 15 Apr 2006 05:10:15 -0500 From: Johnny Hughes <mailing-lists(a)hughesjr.com> Subject: Re: [CentOS] logwatch from cronjob To: CentOS ML <centos(a)centos.org> Message-ID: <1145095815.9773.33.camel(a)myth.home.local> Content-Type: text/plain; charset="utf-8" On Sat, 2006-04-15 at 12:21 +0300, "Î Î‘Î¤Î¡Î™Î£ > Î¤Î¼Î·Î¼Î± Internet" wrote: > > Hello, > > the last 2-3 days i have a saden problem with logwatch wich i call > > through a cron job. > > when i ran the cronjob i get this continues error for the script : > > > Have you changed anything during that time? Is this on CentOS-3 or CentOS-4? ... and what is: cat /etc/redhat-release > > ---- > > Use of uninitialized value in concatenation (.) or string at > > /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 26062. > > Use of uninitialized value in concatenation (.) or string at > > /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 26062. > > Use of uninitialized value in concatenation (.) or string at > > /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 26062. > > ...... > > Use of uninitialized value in concatenation (.) or string at > > /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 27432. > > Use of uninitialized value in concatenation (.) or string at > > /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 27433. > > Use of uninitialized value in concatenation (.) or string at > > /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 27433. > > Use of uninitialized value in concatenation (.) or string at > > /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 27433. > > Use of uninitialized value in concatenation (.) or string at > > /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 27434. > > -------- > > > > before that logwatch was working perfect > > > > any ideas ? >

1 0

RPMforge mplayerplug-in seems to be locking up my sound device
by Bart Schaefer 17 Apr '06

17 Apr '06

Got home from vacation last night and ran yum update. Among other things installed was mplayerplug-in-3.25-1.el4.rf ... now any time I attempt to view CNN video, my sound device locks up -- I eventually end up having to kill firefox, and anything thereafter that attempts to access sound (such as system-config-soundcard) also ends up wedged. Previously this only happened sporadically and after several hours of successful use of the plugin. I have nVidia onboard sound, using the snd_intel8x0 driver module. Anybody have any suggestions?

1 2

Re: Building software RAID mdmad adding a second disk
by israel.garcia＠cimex.com.cu 17 Apr '06

17 Apr '06

Thanks Alexandar for your soon answer, BUT, is there another easier way to do this? Regards, Israel >>Quoting israel.garcia(a)cimex.com.cu: > >>How can I build a RAID 1 of all my particions of sda using mdadm? >>1. Boot into rescue mode. >>2. Shrink each file system a bit. Generally you'll use resize2fs >>utility. MD uses some space at the end of partition for its metadata, >>and you don't want this to overwrite the end of your filesystem. Most >>HOWTOs on the net list this as one of the last steps (after mirrors are >>created). However if you do this as last step, in rare cases it may >>lead to data loss. You probably want to be on the safe side and shrink >>file systems first (this will insure your data is secure). I'm not >>sure by how much you need to shrink, should be somewhere in >>documentation how many sectors at end of partition MD uses for >>metadata... >>3. Create mirror(s) using mdadm. Create using only one real partition >>and use "missing" instead of second partition (wish Anaconda installer >>would allow for something like this). Then use mdadm to add second >>partition to the mirror. Something like: >># mdadm --create /dev/md0 --run --level=1 --raid-devices=2 /dev/sda1 >>missing >># mdadm /dev/md0 -a /dev/sdb1 >>4. Edit /etc/fstab file. >>5. You'll need to rebuild initrd image(s) for installed kernel(s). >>Just mount your filesystems somewhere, chroot into it and run mkinitrd. >> Mkinitrd should be smart enough to figure it'll need md device >>drivers by looking into fstab file. Use -v option to mkinitrd to make >>sure it included needed drivers into new initrd image. >>6. Configure boot loader (LILO or Grub, whicever you use) to reflect >>changes. Make sure you install boot loader into MBR of both drives. >>-- >>See Ya' later, alligator! >>http://www.8-P.ca/

5 4

Raid issue
by William Warren 17 Apr '06

17 Apr '06

I am curious about something. I have a friend that made a software raid 1 partition across a 250 gig 7200 rpm drive and an 80 gig 7200 rpm hard disk drive. he shut the system down normally to clean it out and when it came back up he gets the following: a superblock on /dev/md0 failed would mdadm --assemble --force fix it or lead to more damage? -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician) Linux user #322099 Machines: 206822 256638 276825 http://counter.li.org/

4 3

Extracting ISO Images-How?
by Mark Sargent 17 Apr '06

17 Apr '06

Hi All, I am looking at extracting UBCD ISO and installing modules via Insert to use some extra tools when cloning a CentOS install. How is this done via cli? I did a google search, but nothing seems clear to me at the moment. Could someone point me in the right direction? Cheers. Mark Sargent.

1 1

CentOS-announce Digest, Vol 14, Issue 8
by centos-announce-request＠centos.org 16 Apr '06

16 Apr '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0328 Critical CentOS 3 s390(x) firefox - security update (CENTOSPLUS only) (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Sat, 15 Apr 2006 15:41:08 +0300 From: Pasi Pirhonen <upi(a)papat.org> Subject: [CentOS-announce] CESA-2006:0328 Critical CentOS 3 s390(x) firefox - security update (CENTOSPLUS only) To: centos-announce(a)centos.org Message-ID: <20060415124108.GE18360(a)core.upi.iki.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2006:0328 https://rhn.redhat.com/errata/RHSA-2006-0328.html The following updated files have been uploaded and are currently syncing to the mirrors: s390: centosplus/s390/RPMS/firefox-1.0.8-1.4.1.centos3.s390.rpm s390x: centosplus/s390x/RPMS/firefox-1.0.8-1.4.1.centos3.s390x.rpm source: centosplus/SRPMS/firefox-1.0.8-1.4.1.centos3.src.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://iki.fi/upi/ Top-postings silently ignored

1 0

problem apache proxy reverse
by joseph medina 15 Apr '06

15 Apr '06

hello: i have centos 4.0 whits apache httpd-2.0.52-22.ent.centos4, this is configured like a reverse proxy, but i have a problem only the first site name on the httpd.conf work when i do a peticion from internet for all the rest servers only respond the firts. <VirtualHost *> ServerName dir_ip ProxyPass / http://ejemplo1.test.com/ ProxyPassReverse / http://ejemplo1.test.com/ </VirtualHost> <VirtualHost *> ServerName dir_ip2 ProxyPass / http://ejemplo2.test.com/ ProxyPassReverse / http://ejemplo2.test.com/ </VirtualHost> <VirtualHost *> ServerName dir_ip3 ProxyPass / http://ejemplo3.test.com/ ProxyPassReverse / http://ejemplo3.test.com/ </VirtualHost> DNS is fine becouse from internet all peticion coming to the apache server, but this dont forwarding the second petition. I need one escenario like this /---------\ /------------\ | Web | --------- | Router | \---------/ \------------/ | | /-------------\ |Apache Server| \-------------/ 10.0.0.1 | | Server's /------------------------------------------\ | | | /----------\ /----------\ /----------\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \----------/ \----------/ \----------/ domain1.com domain2.com domain3.com 10.0.0.2 10.0.0.3 10.0.0.4 --------------------------------- LLama Gratis a cualquier PC del Mundo. Llamadas a fijos y móviles desde 1 céntimo por minuto. http://es.voice.yahoo.com --------------------------------- LLama Gratis a cualquier PC del Mundo. Llamadas a fijos y móviles desde 1 céntimo por minuto. http://es.voice.yahoo.com

2 1

Frappr
by Vic Ricker 15 Apr '06

15 Apr '06

Hi. I created a CentOS group on Frappr (http://www.frappr.com/centosusers) if anyone is interested in joining. I'm willing to turn admin rights over if any "official" CentOS people would like to run it. -- Vic Ricker http://www.ricker.us/

2 2

Setting Abbreviatons In .exrc Problems
by Mark Sargent 15 Apr '06

15 Apr '06

Hi All, I'm trying to get vi to display an ab like so, ab htm <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> \<html> \<head> \<meta content="text/html; charset=UTF-8" http-equiv="content-type"> \<title>NewUser</title> \</head> \<body> \</body> \</html> but, when I input the text htm and press the spacebar, I get the following, <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"><html><head><meta content="text/html; charset=UTF-8" http-equiv="content-type"><title>NewUser</title></head><body></body></html> not the desired result. If I remove the leading backslashes, I get errors when starting vi, [racket@ibmlap htdocs]$ sudo vi newuser.php Error detected while processing /home/racket/.exrc: line 26: E488: Trailing characters: <html> line 27: E488: Trailing characters: <head> line 28: E488: Trailing characters: <meta content= line 29: E488: Trailing characters: <title>NewUser</title> line 30: E488: Trailing characters: </head> line 31: E488: Trailing characters: <body> line 32: E488: Trailing characters: </body> line 33: E488: Trailing characters: </html> Hit ENTER or type command to continue How do I get the desired result? Cheers. Mark Sargent.

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss