Discuss

discuss@lists.centos.org

5 participants
34752 discussions

Start a nNew thread

CentOS-announce Digest, Vol 14, Issue 7
by centos-announce-request＠centos.org 15 Apr '06

15 Apr '06

1 0

logwatch from cronjob
by "ΠΑΤΡΙΣ > Τμημα Inte rnet" 15 Apr '06

15 Apr '06

Hello, the last 2-3 days i have a saden problem with logwatch wich i call through a cron job. when i ran the cronjob i get this continues error for the script : ---- Use of uninitialized value in concatenation (.) or string at /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 26062. Use of uninitialized value in concatenation (.) or string at /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 26062. Use of uninitialized value in concatenation (.) or string at /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 26062. ...... Use of uninitialized value in concatenation (.) or string at /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 27432. Use of uninitialized value in concatenation (.) or string at /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 27433. Use of uninitialized value in concatenation (.) or string at /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 27433. Use of uninitialized value in concatenation (.) or string at /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 27433. Use of uninitialized value in concatenation (.) or string at /etc/log.d/scripts/shared/applystddate line 43, <STDIN> line 27434. -------- before that logwatch was working perfect any ideas ?

2 1

What happened to www.centos.org?
by Mike 15 Apr '06

15 Apr '06

Not sure if this is specific to me or what... but I cannot access the site.

5 5

CentOS-announce Digest, Vol 14, Issue 6
by centos-announce-request＠centos.org 14 Apr '06

14 Apr '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2006:0413-001 CentOS 4 i386 drbd - bugfix update (EXTRAS Only) (Johnny Hughes) 2. CEBA-2006:0413-001 CentOS 4 x86_64 drbd - bugfix update (EXTRAS Only) (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 13 Apr 2006 16:05:19 -0500 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2006:0413-001 CentOS 4 i386 drbd - bugfix update (EXTRAS Only) To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <1144962319.32197.24.camel(a)myth.home.local> Content-Type: text/plain; charset="us-ascii" CEBA-2006:0413-001 CentOS 4 i386 drbd - bugfix update (EXTRAS Only) This is a drbd bugfix update. The following are the fixes from the previous version: 0.7.17 (api:77/proto:74) ----- * There was a bug that could cause the activity log to be not applied after a primary crash, when an other size than 127 elements was configured. * There was a bug in the activity log code, that could cause that the latest update to the AL is omitted at recovery time. * The "Marked additional XXKB as out-of-synced based on AL." message showed one one eighth of the real amount, fixed. 0.7.16 (api:77/proto:74) ----- * DRBD no longer shrinks an consistent device if it gets connected to an smaller peer or attached to a smaller disk. * There was a bug related to the degr-wcf-timeout config option, it was never used in recent DRBD releases. Fixed. * Made DRBD work with Neil Brown's patch, that serializes recusive ralls to generic_make_request(). FC4 included that patch in its later kernels. * Minor fixes to drbdadm * Compiles now also with Linux-2.6.16-rc1 * Updates to documentation and example config file to make it more clear that we talk about byte/second and not bit/second. 0.7.15 (api:77/proto:74) ----- * Fixed a bug in the GC code that could cause a resync attempt in the wrong direction. * Made DRBD's compat_ioctls work with kernels higher than 2.6.14. This means DRBD builds on AMD64/x86_64 with 2.6.15 and higher again. * drbdadm no longer looks in the current directory for its backend programs (=drbdsetup), but instead looks in the directory of the drbdadm executable and in $PATH. * Removed the examples from manpage, added a pointer to the HA-wiki. --------------------------------------------- The following files are updated and syncing to the mirrors: i386: drbd-0.7.17-1.c4.i386.rpm kernel-module-drbd-2.6.9-11.EL-0.7.17-1.c4.i686.rpm kernel-module-drbd-2.6.9-11.ELhugemem-0.7.17-1.c4.i686.rpm kernel-module-drbd-2.6.9-11.ELsmp-0.7.17-1.c4.i686.rpm kernel-module-drbd-2.6.9-22.0.1.EL-0.7.17-1.c4.i686.rpm kernel-module-drbd-2.6.9-22.0.1.ELhugemem-0.7.17-1.c4.i686.rpm kernel-module-drbd-2.6.9-22.0.1.ELsmp-0.7.17-1.c4.i686.rpm kernel-module-drbd-2.6.9-22.0.2.EL-0.7.17-1.c4.i686.rpm kernel-module-drbd-2.6.9-22.0.2.ELhugemem-0.7.17-1.c4.i686.rpm kernel-module-drbd-2.6.9-22.0.2.ELsmp-0.7.17-1.c4.i686.rpm kernel-module-drbd-2.6.9-22.EL-0.7.17-1.c4.i686.rpm kernel-module-drbd-2.6.9-22.ELhugemem-0.7.17-1.c4.i686.rpm kernel-module-drbd-2.6.9-22.ELsmp-0.7.17-1.c4.i686.rpm kernel-module-drbd-2.6.9-34.EL-0.7.17-1.c4.i686.rpm kernel-module-drbd-2.6.9-34.ELhugemem-0.7.17-1.c4.i686.rpm kernel-module-drbd-2.6.9-34.ELsmp-0.7.17-1.c4.i686.rpm src: drbd-0.7.17-1.c4.src.rpm

1 0

Problems with 4.3 install - didnt write boot record
by Nick Smith 14 Apr '06

14 Apr '06

the first time i tried to install centos on my fileserver it detected my reiserfs drives but then didnt give me a kernel to actually access them - strike one now im trying centos on my mail server, wipe the drives, created a mirrored raid array from the setup, (took over 14 hours to format and sync) finally finished the install AND IT DIDNT WRITE THE BOOT RECORD! when it rebooted i got my grub menu from GENTOO! - strike two, now im back into the install cd, trying to figure out how to install grub like the install should have done for me, but there is no grub command at the prompt (trying to use tab completion) im ready to hurt something im so frustrated, can anyone help me out here? ive seen http://www.dur.ac.uk/a.d.stribblehill/mirrored_grub.html but without the grub command that page is useless. Im sure someone has to be booting RH/CentOS off mirrored software raid, some help please! id like to get this thing going tonight if possible, thanks! Nick

7 11

RE: Re: [CentOS] firewall and * suggestions
by pctech＠mybellybutton.com 14 Apr '06

14 Apr '06

This box will work great. If you would like to find out about a HowTo with regards to the basic building, not ruleset management, of a firewall using CentOS, look in the security section of the Forums. >Hi, > >This box is more then enought for a firewall ;)...i really think you >could send 50Mbits+ of filtered traffic thru this box ;) > >Bgrds, >Finnur > >Simone wrote: > >> Hi, >> I am going to set up an office of 30 employees and since it's the >> first time I thought I will ask for suggestions (trying to make a >> CentOS base office :) ). I was planning to re use an old Compaq LPr >> PII 450, sw mirrored scsi 10000rpm disks, 448Mb RAM, to build a >> CentOS based firewall and I was wondering if this hardware would be >> enough to serve 30 clients (I already have a centos firewall serving 8 >> users on a PC celeron 1,3Ghz machine and top shows average load 0.00). >> The other service they'll need is filesharing, which will be Samba >> running on samba Dell PE1800 (although we could use a compaq 1850r >> PIII 600), while for the phone system I would like to set up Asterisk >> and I was wondering if anyone has had a good experience with the >> Xorcom TS-1, which seems a nice cost effective system. >> >> Suggestions are very welcome, have a nice day. >> >> Simone >> >> _______________________________________________ >> CentOS mailing list >> CentOS(a)centos.org >> http://lists.centos.org/mailman/listinfo/centos > > >_______________________________________________ >CentOS mailing list >CentOS(a)centos.org >http://lists.centos.org/mailman/listinfo/centos

2 1

yum error
by Nick Smith 14 Apr '06

14 Apr '06

Im new to yum, so i really dont know how to fix this problem, i just added the dag repos, havent installed anything yet, just wanted to see what it was, i did a "yum update" and i get this error: [root@mail etc]# yum update Setting up Update Process Setting up repositories Reading repository metadata in from local files Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Package syslinux.i386 0:3.11-1.2.el4.rf set to be updated ---> Package subversion.i386 0:1.2.1-0.1.2.el4.rf set to be updated ---> Package rdesktop.i386 0:1.4.1-0.el4.rf set to be updated ---> Package mtr.i386 2:0.71-1.el4.rf set to be updated ---> Package iptraf.i386 0:3.0.0-1.2.el4.rf set to be updated ---> Package nmap-frontend.i386 2:4.01-2.2.el4.rf set to be updated ---> Package python-urlgrabber.noarch 0:2.9.7-1.2.el4.rf set to be updated ---> Package spamassassin.i386 0:3.0.5-3.el4 set to be updated ---> Package nmap.i386 2:4.01-2.2.el4.rf set to be updated ---> Package rsync.i386 0:2.6.7-2.el4.rf set to be updated ---> Package lftp.i386 0:3.4.4-1.el4.rf set to be updated ---> Package freetype.i386 0:2.1.9-1.2.2.el4.rf set to be updated ---> Package python-elementtree.i386 0:1.2.6-6.2.el4.rf set to be updated --> Running transaction check --> Processing Dependency: perl(String::CRC32) for package: lftp --> Processing Dependency: perl-Mail-SpamAssassin = 3.0.2-1 for package: spamassassin-tools --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Package perl-String-CRC32.i386 0:1.3-1.2.el4.rf set to be updated --> Running transaction check --> Processing Dependency: perl-Mail-SpamAssassin = 3.0.2-1 for package: spamassassin-tools --> Finished Dependency Resolution Error: Missing Dependency: perl-Mail-SpamAssassin = 3.0.2-1 is needed by package spamassassin-tools I do have qmail installed with clamav and SA, and they all seem to be working fine, what is the missing Dep and how to I fix this problem? yum says its installed: [root@mail etc]# yum search perl-Mail-Spam Searching Packages: Setting up repositories Reading repository metadata in from local files perl-Mail-SpamAssassin.i386 3.0.2-1 installed Matched from: perl-Mail-SpamAssassin thanks for the help. -- Linux, because I'd rather own a free OS than steal one that's not worth paying for.

3 4

Centos merchandise
by Fajar Priyanto 14 Apr '06

14 Apr '06

Hi all, Do you know where I can buy Centos merchandise such as posters, tshirt, mug, etc? Especially, posters. I'd like to put some on my office to put some pressures on my windows-minded colleaques. Thanks. -- Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial http://linux2.arinet.org 13:27:37 up 6:06, 2.6.15-1.1830_FC4 GNU/Linux Let's use OpenOffice. http://www.openoffice.org

5 5

heartbeat-2.0.4 in the Testing Repo
by Johnny Hughes 14 Apr '06

14 Apr '06

We have added heartbeat-2.0.4 for CentOS 4 into the testing repository at dev.centos.org. Copy the testing CentOS-Testing.repo file from here: http://dev.centos.org/centos/4/ to /etc/yum.repos.d/ , then use this command to install heartbeat: yum --enablerepo=c4-testing install heartbeat Report issues with this to the heartbeat-2.0 tracker here: http://bugs.centos.org/view.php?id=1305

1 0

Iptables port forwarding help
by Thomas E Dukes 14 Apr '06

14 Apr '06

Hello, I have a webcam that I wish to view from the internet. It is a wireless linksys model with an ip address of 192.168.1.15. I have it set on port 8081, 192.168.1.15:8081. I am using the IP Masquerade HowTo script. Here's the rule I added to my firewall script: EXTIF="ppp0" INTIF="eth1" EXTIP="`$IFCONFIG $EXTIF | grep inet | cut -d : -f 2 | cut -d \ -f 1`" $IPTABLES -A FORWARD -i $EXTIF -o $INTIF -p tcp --dport 8081 -m state \ --state NEW,ESTABLISHED,RELATED -j ACCEPT $IPTABLES -A PREROUTING -t nat -p tcp -d $EXTIP --dport 8081 \ -j DNAT --to 192.168.1.15:8081 Its not working. Can anyone offer a suggestion? TIA

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss