Discuss

discuss@lists.centos.org

5 participants
34752 discussions

CentOS-announce Digest, Vol 11, Issue 5
by centos-announce-request＠centos.org 16 Jan '06

16 Jan '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0179-01: Critical CentOS 2 i386 auth_ldap security update (John Newbigin) 2. CESA-2006:0156-01: Low CentOS 2 i386 Moderate: ethereal security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Mon, 16 Jan 2006 11:08:53 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2006:0179-01: Critical CentOS 2 i386 auth_ldap security update To: centos-announce(a)centos.org Message-ID: <43CAE415.1020201(a)ict.swin.edu.au> Content-Type: text/plain; charset=us-ascii; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2006:0179-01 Critical: auth_ldap security update Files available: auth_ldap-1.4.8-3.1.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 2 Date: Mon, 16 Jan 2006 11:10:30 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2006:0156-01: Low CentOS 2 i386 Moderate: ethereal security update To: centos-announce(a)centos.org Message-ID: <43CAE476.3040602(a)ict.swin.edu.au> Content-Type: text/plain; charset=us-ascii; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2006:0156-01 Moderate: ethereal security update Files available: ethereal-0.10.14-1.AS21.1.i386.rpm ethereal-gnome-0.10.14-1.AS21.1.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 11, Issue 5 **********************************************

1 0

bugzilla rpm?
by Matt Lawrence 16 Jan '06

16 Jan '06

Does anyone know where to find a RPM of bugzilla for CentOS4 (or RHEL4)? I'm still very new at building RPMs, so I would strongly prefer to get one already built (and by someone who is better at it than I am). -- Matt

2 1

USB Problem
by Paul R. Ganci 16 Jan '06

16 Jan '06

I am having this problem where out of the blue my mouse and UPS will stop functiong. Once this even occurs I will find multiple messages like: Jan 15 10:40:32 nureyev kernel: drivers/usb/input/hid-core.c: control queue full Jan 15 10:40:42 nureyev kernel: drivers/usb/input/hid-core.c: control queue full iin /var/log/messages. The only way I can get the mouse and UPS back is to ssh into the affected machine and do: rmmod ohci_hcd modprobe ohci_hcd Then the system will be good from anywhere to a few hours to a week when this occurs again. I am running an up to date Centos 4.2 albeit with the 2.6.9-27 SMP kernel. Here are the devices on the USB: # cat /proc/bus/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4 B: Alloc= 27/900 us ( 3%), #Int= 2, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.9-27.ELsmp ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:02:00.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=046d ProdID=c002 Rev= 1.10 S: Manufacturer=Logitech S: Product=USB-PS/2 Mouse M-BA47 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 50mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=051d ProdID=0002 Rev= 1.06 S: Manufacturer=American Power Conversion S: Product=Back-UPS RS 1000 FW:7.g4 .D USB FW:g4 S: SerialNumber=JB0317027749 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 24mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 6 Ivl=10ms Does anyone have any ideas on what I might do to fix this problem. Thanks. -- Paul (ganci(a)nurdog.com)

1 0

Ping
by Dan Wright 15 Jan '06

15 Jan '06

Ping

2 1

Linksys WPC11 v2.5 + CentOS 4
by Barry Brimer 15 Jan '06

15 Jan '06

Does anyone have a Linksys WPC11 v2.5 running under CentOS 4? If so, were there any special tricks that you had to perform? Any information would be most helpful. Thanks, Barry Brimer

2 2

Pcmcia notebook card configuration
by Anthony Lordi 15 Jan '06

15 Jan '06

I just installed CentOS v.2.1 on my laptop, and am not familiar with and wondered if CentOS has a pc card config gui. I have DSL and a dhcp router and modem setup. I can't find a card setup for my wired eth0 card in CentOS. And, I'm command line deprived. Everything seems to work except the pc cards. Both the wired and wireless are Linksys. Help. Tony

2 2

nvidia driver problem, cant load
by Roger D Vargas 15 Jan '06

15 Jan '06

Im trying to install an old nvidia driver, the last that has support for obsolete cards. But when the compilation process ends I get an error: says that kernel version is not the same of the sources used to compile driver. I checked version of kernel sources and running kernel and they are the same, can somebody tell me whats wrong? -- Roger D. Vargas http://dsgp.blogspot.com | Linux, programación, juegos ______________________________________________ LLama Gratis a cualquier PC del Mundo. Llamadas a fijos y móviles desde 1 céntimo por minuto. http://es.voice.yahoo.com

3 3

yum group install [DNK]
by Dustin Krysak 15 Jan '06

15 Jan '06

Hi there -- i am just looking for clarification on the yum "group install" option.... How can you tell what are valid groups? IE I found the below example on google: yum groupinstall "MySQL Database" I have heard references to doing things like: yum groupinstall "Development Tools" But to the point - is there a list of valid groups for install? ---------- Dustin Krysak Backbone Technology Inc. 604.713.8560

3 4

CentOS 4.2 x86_64
by Fong Vang 14 Jan '06

14 Jan '06

I have a couple of 64-Bit Xeon's with CentOS 4.2 x86_64 installed on them. They don't all have the same motherboards. I've having a difficult time getting CentOS 4.2 x86_64 to boot on some of them in SMP mode (UP works fine). After the installation of CD, it boots up but kernel panics with the following error: Badness in i8042_panic_blink at drivers/input/serio/i8042.c:992 This is the call trace: apic_timer_interrupt+133 vgacon_cursor+0 oops_end+64 release_console_sem+369 error_exit+0 :scsi_mod:scsi_delete_timer+19 :3w_9xxx:twa_interrupt+1323 do_IRQ+197 mwait_idle+86 cpu_idle+26 The Uni processor works fine. I tried the SMP kernel from Fedora Core 4 x86_64 which works fine as well. Any idea what's going on here? I've already tried disabling as many things from the BIOS as possible. Thanks for any help.

3 3

Remote printing problem
by P Marvin Eberly 14 Jan '06

14 Jan '06

Hello list, I am trying to set up a remote Epson printer with a Epson print server attached. I am using IPP and when setting up a print queue from system- config-printer, I am unable to print a test page. I get this error: There was a problem sending CUPS test page to 'remote740' queue: lpr: error - unable to print file: server-error-service-unavailable I can however print a test page from http://localhost:631/printers, whether I set up the queue in http://localhost:631/printers or in system-config-printer. If I set up a queue from the web interface system-config-printer does not see it, but the web interface sees any queue I set up. This is a fully updated CentOS 4.2 Athlon XP machine and I have this remote printing working perfect from FC3 and from CentOS 3 machines on this network. The queue is never seen in OO or any other apps that I've tried to print from. I am probably missing something simple, but cannot find it. Thanks for any ideas, Marvin

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss