Discuss

discuss@lists.centos.org

34753 discussions

Re: [CentOS] Cookbook receipe for SCSI tape install requested.
by Sean O'Connell 07 Sep '05

07 Sep '05

On Tue, 2005-09-06 at 22:54 -0400, James B. Byrne wrote: > On 6 Sep 2005 at 18:13, Rodrigo Barbosa wrote: > > > You will have to select the correct module for your controler, and > > configure it (/etc/modprobe.conf). lspci might give you the information > > you need to get started. > > Perhaps I am using the wrong terminology for my request. I am > seeking assistance in configuring linux to recognize and use a scsi > tape drive. The scsi controller was added to this system for the > sole purpose of supporting the tape unit long after the os was > loaded. I do not know how to tell the linux kernel to select and > load the necessary module to access the scsi controller and thence > the tape drive. That is why I sought a cookbook solution to this > problem. There must be somewhere, a well defined series of steps that > one goes through to identify, select, and configure the appropriate > module for a specific scsi adapter. I lack this knowledge and this > is what I seek. > > lspci yields this: > > 05:04.0 SCSI storage controller: Initio Corporation 360P (rev 02) > > /etc/modeprobe.conf contains this: > > alias eth0 e100 > alias snd-card-0 snd-intel8x0 > options snd-card-0 index=0 > install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 && > /usr/sbin/alsactl restore >/dev/null 2>&1 || : > remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; > }; /sbin/modprobe -r --ignore-remove snd-intel8x0 > alias usb-controller ehci-hcd > alias usb-controller1 uhci-hcd > > SO. What do I put into modprobe.conf to get the system to recognize > the scsi controller? Is there a utility to detect and do this? I > appreciate all the assistance but I need a more basic, step by step, > explanation of how to go about this. Jim- If you run kudzu (Redhat's hardware config utility) by hand as root, does it see the card and attempt to configure it? kudzu should generate the proper magic in /etc/sysconfig/hwconf and in /etc/modprobe.conf. Based on a quick google, this should be supported by the initio module. If kudzu fails to do the magic, try modprobe initio You could also add an entry to /etc/modprobe.conf alias scsi_hostadapter initio modprobe scsi_hostadapter -- Sean

1 0

Cookbook receipe for SCSI tape install requested.
by James B. Byrne 07 Sep '05

07 Sep '05

I need to install an HP Surestore dlt on a Centos 4 machine and I am at a loss as to how to proceed. Can someone either provide or point me to an online reference on how to proceed to add and configure a SCSI adapter and tape drive. I have read, but not really understood, the man page entry for st. Does kudzu handle this? Regards, Jim I am a digest subscriber so the favour of an additional direct reply is desired. -- *** e-mail is not a secure channel *** mailto:byrnejb.<token>@harte-lyne.ca James B. Byrne Harte & Lyne Limited vox: +1 905 561 1241 9 Brockley Drive fax: +1 905 561 0757 Hamilton, Ontario <token> = hal Canada L8E 3C3

4 8

/var/log/lastlog on x86_64
by Manuel BERTRAND 07 Sep '05

07 Sep '05

Hi list, this problem is already known and I'm sorry to bother if an acceptable workaround was already debated on the list. I was getting trouble with a 'grep something /var/log*' which caused the "Memory exhausted" message. With some deeper search I found the lastlog file in /var/log/ to be 1.2T sized. This seems to come from the nfsnobody's uid to be 4294967294 on x86_64 system (and -1 on i386) and the pre-allocation space for every uid (so from 0 to ...4294967294...hum..) from lastlog. Since I do not use NFS at all, can I just erase the nfsnobody from /etc/passwd and start with a blank lastlog file (this looks like a great way to nuke my system)? Or do I need to explicitly exclude this file from all my search? How do you -x86_64 users- deal with this? It seems the mainstream people don't see this as an issue. the system: 2.6.9-11.ELsmp #1 SMP Fri May 20 18:25:30 EDT 2005 x86_64 x86_64 x86_64 GNU/Linux CentOS 4 Thanks, Manuel

3 4

commercial load balancer suggestions
by Robin Mordasiewicz 07 Sep '05

07 Sep '05

Hi we bought an astaro firewall and are quite happy with it, now we need to buy a commercially supported LVS (linux virtual server) appliance. Does anyone have any good experience using any commercial LVS devices with web based GUI. --

7 8

CentOS 3 -> logins
by Ugo Bellavance 07 Sep '05

07 Sep '05

Hi, Since I upgraded CentOS from 3 to 4, I get those enties in logwatch. It seems to be caused by cron, opening a session everytime it executes a task. Is that normal? crond: Unknown Entries: session closed for user root: 381 Time(s) session opened for user root by (uid=0): 379 Time(s) session closed for user user: 239 Time(s) session opened for user user by (uid=0): 239 Time(s) session closed for user backup_user: 2 Time(s) session opened for user backup_user by (uid=0): 2 Time(s) -- Ugo -> Please don't send a copy of your reply by e-mail. I read the list. -> Please avoid top-posting, long signatures and HTML, and cut the irrelevant parts in your replies.

3 2

Yum
by Sam Drinkard 07 Sep '05

07 Sep '05

This may be considered a newbie question, and for me, yum is a new tool. I have discovered via yum, I am *supposed* to have libf2c (386) and libf2c (x86-64) installed. Searching the two libs, I find I only have the 32-bit version installed, and I need both. Should I use yum to remove the pkgs, and then reinstall, or should I use rpm to do the installs? Again, I'm from the BSD camp, so this is all new to me. Also, are the two libs in question on the distro CD's or do I need to go out and find them, or let yum find them for me and install? Thanks.. -- Snowman

3 3

Postfix+sasl Outlook problem.
by Dominik Składanowski 06 Sep '05

06 Sep '05

I have mail server on CentOS 4.1. Sasl authorization for SMTP is enabled. Thunderbird sends mail, but Outlook get an error 554, Relay access denied, error number 0x800CCC79 Outlook has a login and password for SMTP enabled. It is strange, because there is no any sign of authorize in maillog when Outlook try to send mail. -- ____________________________________________________________________ D o m i n i k S k ł a d a n o w s k i

2 7

tripwire?
by Scot L. Harris 06 Sep '05

06 Sep '05

Is there a version of tripwire for Centos? I did a quick search in one of the mirrors but did not find one. Possibly I am looking in the wrong place.

6 10

RE: [CentOS] Paranoid Firewalling
by Minica, Nelson (EDS) 06 Sep '05

06 Sep '05

It will reduce bandwidth, not all, maybe not much, but unestablished TCP connections take less bandwidth than established, with most of the bandwidth being used by the protocol data on top of the established session (even if its just a reject). Nelson

1 0

sending key strokes to applications
by Jerry Geis 06 Sep '05

06 Sep '05

All, Is there a way to send key strokes to applications under X? I wish to send F11 to mozilla/firefox to put it in full screen mode. Not sure why there is not a command line parameter to do it. Just some utility that could be run that sends a keystroke to an application. THanks Jerry

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss