Discuss

discuss@lists.centos.org

3 participants
34748 discussions

SELinux
by Craig White 31 Aug '05

31 Aug '05

I'm probably dense - CentOS 4.1 # cat /etc/sysconfig/selinux ..snip... SELINUXTYPE=targeted # su - Alec # tail -n 3 /var/log/messages Aug 31 08:48:26 srv1 su(pam_unix)[31435]: session opened for user Alec by root(uid=0) Aug 31 08:48:26 srv1 su[31435]: Warning! Could not relabel /dev/pts/0 with user_u:object_r:devpts_t, not relabeling.Operation not permitted Aug 31 08:48:27 srv1 su(pam_unix)[31435]: session closed for user Alec restorecon -v /dev/pts/0 or restorecon -R /dev/pts don't help My interest is actually trying to remotely run a vnc session to a different computer. I connect to it via ssh # ssh -XC -p XXXX root@fqdn and then run vncviewer # vncviewer 192.168.1.253:0 VNC viewer for X version 4.0 - built Feb 21 2005 15:39:30 Copyright (C) 2002-2004 RealVNC Ltd. See http://www.realvnc.com for information on VNC. vncviewer: unable to open display "" so I was thinking I would try to set up vncserver as the user on that machine but unable to su to a shell for that user means I can't run vncpassword for that user. ;-( Anyone want to toss me a bone on any of these issues (I have been reading SELinux notes at Fedora 3 Craig

1 1

iptables help request
by James Pifer 31 Aug '05

31 Aug '05

I have a server running on CentOS that sits being another firewall. I want to forward a certain ports to another server, but only for a handful of addresses. Can anyone assist with an example rule of this? For example, let's say I wanted requests from 24.83.77.24 and 63.47.50.16 on port 10001 to forward to internal server 192.168.1.15 All other requests for THAT port would be rejected or dropped. Anyone willing to give me an example rule that would allow this to be forwarded? I appreciate any help. Thanks, James

2 1

Tux on Centos 4.x x86_64
by Alan Hodgson 31 Aug '05

31 Aug '05

Is anyone successfully running Tux on Centos 4.1 x86_64? If so, what version? Thanks in advance for any info. -- In a world where the citizens of most developed nations have half their incomes wrested from them by the state (slaves only paid about a quarter, effectively), how widely supported do you think the idea of "freedom" really is?

2 2

mnt usb hard drive
by Filianx 31 Aug '05

31 Aug '05

Hi all, can anyone tell me how to mount my usb hdd, all other usb peripherals get picked up ok cheers in advance -- Filianx

4 6

CentOS-announce Digest, Vol 6, Issue 15
by centos-announce-request＠centos.org 31 Aug '05

31 Aug '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:267 Important CentOS 3 s390(x) Evolution - security update (Pasi Pirhonen) 2. CESA-2005:267 Important CentOS 4 s390(x) Evolution - security update (Pasi Pirhonen) 3. CESA-2005:267 Important CentOS 3 x86_64 Evolution - security update (seth vidal) 4. CESA-2005:267 Important CentOS 3 i386 Evolution - security update (seth vidal) ---------------------------------------------------------------------- Message: 1 Date: Tue, 30 Aug 2005 18:25:47 +0300 From: Pasi Pirhonen <upi(a)papat.org> Subject: [CentOS-announce] CESA-2005:267 Important CentOS 3 s390(x) Evolution - security update To: centos-announce(a)centos.org Message-ID: <20050830152547.GC22588(a)core.upi.iki.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2005:267 https://rhn.redhat.com/errata/RHSA-2005-267.html The following updated files have been uploaded and are currently syncing to the mirrors: s390: updates/s390/RPMS/evolution-1.4.5-16.s390.rpm updates/s390/RPMS/evolution-devel-1.4.5-16.s390.rpm s390x: updates/s390x/RPMS/evolution-1.4.5-16.s390x.rpm updates/s390x/RPMS/evolution-devel-1.4.5-16.s390x.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://iki.fi/upi/

1 0

USB DIsk and mount point
by Jesús García González 30 Aug '05

30 Aug '05

Hello. I use Centos 4.1 When I inserted my usb 2.0 disk for the first time it created the mount point /media/usbdisk just fine. Which I used to mount the disk. But as soon as I used it in another computer (winxp) when I took the usb back to centos the mount point had become /media/IOMEGA (yeah it's an iomega driver) but then as time goes by, the mount point every time the disk is used else where the mount point changes from /media/___________ to whatever other garble you can think of.... Now Executing a mount /media/_what_ever_is_today_ will mount the usb disk just fine without any problems. Why does the mount point changes so erratically??? J.

2 1

USB Disk
by James Pifer 30 Aug '05

30 Aug '05

I put a new server together with CentOS 4. This server is doing a number of functions including ntp, mail, and web server. I had a USB drive plugged in and it was working great. I could access it at /media/usbdisk and I copied lots of data to it. I felt the server was "complete" so I wanted to move it. I shut it down, moved it, etc. Everything is ok, except that I cannot access the usbdisk now. If I plug it into my laptop (FC4) I can access it without any problems. When I plug it into the server I get: Aug 30 15:47:22 porky kernel: ohci_hcd 0000:00:0f.2: wakeup Aug 30 15:47:22 porky kernel: usb 1-2: new full speed USB device using address 3 Aug 30 15:47:22 porky kernel: scsi3 : SCSI emulation for USB Mass Storage devices Aug 30 15:47:22 porky kernel: Vendor: WDC WD16 Model: 00JB-00GVA0 Rev: 0 0 Aug 30 15:47:22 porky kernel: Type: Direct-Access ANSI SCSI revision: 02 Aug 30 15:47:22 porky kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) Aug 30 15:47:22 porky kernel: sdb: assuming drive cache: write through Aug 30 15:47:22 porky kernel: sdb: sdb1 Aug 30 15:47:22 porky kernel: Attached scsi disk sdb at scsi3, channel 0, id 0, lun 0 Aug 30 15:47:22 porky kernel: Attached scsi generic sg3 at scsi3, channel 0, id 0, lun 0, type 0 Aug 30 15:47:22 porky scsi.agent[9209]: disk at /devices/pci0000:00/0000:00:0f.2/usb1/1-2/1-2:1.0/host3/target3:0:0/3:0:0:0 Aug 30 15:47:23 porky fstab-sync[9282]: added mount point /media/usbdisk for /dev/sdb1 Problem is when I go to /media/usbdisk there's nothing there. Anyone have any suggestions? Thanks, James

4 4

server install and software config advise please
by Robert Hanson 30 Aug '05

30 Aug '05

Greetings I did another quick server install on an old rackmount Compaq Proliant 1850R with hardware RAID5 today. would someone please shed some of their experience and light on how they deal with deleting or keeping the default configs on these items please when i do a chkconfig --list | grep :on | more nfslock 0:off 1:off 2:off 3:on 4:on 5:on 6:off readahead 0:off 1:off 2:off 3:off 4:off 5:on 6:off portmap 0:off 1:off 2:off 3:on 4:on 5:on 6:off rawdevices 0:off 1:off 2:off 3:on 4:on 5:on 6:off rpcsvcgssd 0:off 1:off 2:off 3:on 4:on 5:on 6:off irqbalance 0:off 1:off 2:off 3:on 4:on 5:on 6:off lm_sensors 0:off 1:off 2:on 3:on 4:on 5:on 6:off messagebus 0:off 1:off 2:off 3:on 4:on 5:on 6:off netfs 0:off 1:off 2:off 3:on 4:on 5:on 6:off microcode_ctl 0:off 1:off 2:on 3:on 4:on 5:on 6:off mdmonitor 0:off 1:off 2:on 3:on 4:on 5:on 6:off autofs 0:off 1:off 2:off 3:on 4:on 5:on 6:off rpcgssd 0:off 1:off 2:off 3:on 4:on 5:on 6:off readahead_early 0:off 1:off 2:off 3:off 4:off 5:on 6:off rpcidmapd 0:off 1:off 2:off 3:on 4:on 5:on 6:off arptables_jf 0:off 1:off 2:on 3:on 4:on 5:on 6:off cpuspeed 0:off 1:on 2:on 3:on 4:on 5:on 6:off i did snip some out as i choose to keep them... i can obviously dust all the rpc**** stuff and portmap for now correct??? can anyone please comment on the rest of these please? i mean, what is some of this unrecognizable stuff??... at least for me eh? this is a straight dns server with all ext3 and a swap and is running bind, vsftpd, sshd, and smtp and that is about it. ive done enough research and searching to be more dangerous than good on these..........and even though i have been involved in this for a long time, i would rather be safe than sorry with the newer opsys versions. thanks in advance! - rh - rh -- Robert Hanson Abba Communications http://www.abbacomm.net

5 7

install on a Dell4400 perc2 /DC
by peter v richards 30 Aug '05

30 Aug '05

I got fedora core 4 to install and show me the configured Raid drives. no mean trick let me tell you. However, the platform is unstable and hangs. I tried Centos 4.1 but the raid drives are not identified like most other distros. can i do anything from the fedora install that might allow me to install the centos distro. I would rather not have to go out and buy a new raid card. peter richards

3 2

CentOS-announce Digest, Vol 6, Issue 14
by centos-announce-request＠centos.org 30 Aug '05

30 Aug '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:267 Important CentOS 4 ia64 Evolution - security update (Pasi Pirhonen) 2. CESA-2005:267 Important CentOS 3 ia64 Evolution - security update (Pasi Pirhonen) 3. CESA-2005:267 Important CentOS 4 i386 Evolution - security update (Johnny Hughes) 4. CESA-2005:267 Important CentOS 4 x86_64 Evolution - security update (Johnny Hughes) 5. Re: CESA-2005:267 Important CentOS 4 x86_64 Evolution - security update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 29 Aug 2005 22:46:26 +0300 From: Pasi Pirhonen <upi(a)papat.org> Subject: [CentOS-announce] CESA-2005:267 Important CentOS 4 ia64 Evolution - security update To: centos-announce(a)centos.org Message-ID: <20050829194626.GA22588(a)core.upi.iki.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2005:267 https://rhn.redhat.com/errata/RHSA-2005-267.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/ia64/RPMS/evolution-2.0.2-16.3.ia64.rpm updates/ia64/RPMS/evolution-devel-2.0.2-16.3.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://iki.fi/upi/

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss