Discuss

discuss@lists.centos.org

5 participants
34752 discussions

making a route sticky
by Aleksandar Milivojevic 09 Aug '05

09 Aug '05

Is it possible to have a route stick in the kernel, even if device it points to goes to roller coaster up and down drive. For example. I have an ADSL modem and am doing VPN over it. There's a route needed for VPN added like this: ip route add 192.168.1.0/24 via 1.2.3.4 src 192.168.2.1 There are two problems with it: a) if ADSL link is down when above command is executed, the route command will fail (ppp0 is down, so there's no 1.2.3.4) b) if ADSL link is up when above command is executed, but it goes down (and up again) later, the route is removed from kernel routing tables So, if there are any problems with ADSL link, I need to manually reset my VPN setup. I could write some monitoring script (and call it from cron) that would check if route is present and attempt to readd it if needed, but I'd rather be able to have the route either sticky (not removed when interface goes down) or automatically reenabled by the kernel when interface goes up again. Thanks, Aleksandar Milivojevic ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

7 23

2.4 kernel on CentOS 4.1
by Harald Finnås 09 Aug '05

09 Aug '05

Just wondering if anyone is running a 2.4 kernel with CentOS 4.1? I need to "downgrade" for compatability with a disk driver, and from experience I know this can be a HUGE problem with certain other distros... Regards, Harald

2 1

Missing dependencies for HA
by John Banas 09 Aug '05

09 Aug '05

CentOS 4.1 and Heartbeat 2.0.0. I'm trying to install the rpm's for heartbeat and heartbeat-stonith and get these failed dependencies. error: Failed dependencies: libcrypto.so.0.9.7 is needed by heartbeat-2.0.0-1.i586 libnet.so.0 is needed by heartbeat-2.0.0-1.i586 librpm-4.1.so is needed by heartbeat-2.0.0-1.i586 librpmdb-4.1.so is needed by heartbeat-2.0.0-1.i586 librpmio-4.1.so is needed by heartbeat-2.0.0-1.i586 libcrypto.so.0.9.7 is needed by heartbeat-stonith-2.0.0-1.i586 I tried looking for them under Fedora 3 and 4 without any luck. Anyone know were I can find them? I have openssl installed and I have rpm-libs installed but I'm still coming up empty.

2 1

Ivan Čaplovič je na dovolenke.
by icaplovic＠gamo.sk 09 Aug '05

09 Aug '05

I will be out of the office starting 09.08.2005 and will not return until 28.08.2005. Odpoviem Vám, keď sa vrátim. Prípadne je ma možné kontaktovať formou SMS na mobilnom telefóne.

1 0

httx, iiimf, and Japanese input still not working
by Dave Gutteridge 08 Aug '05

08 Aug '05

Japanese input - the final frontier. This is the last obstacle before I can work completely within Centos and be free of Windows. But it's still not working. To cut to the chase, in my quest to get Japanese working, I came across the following: https://www.redhat.com/archives/fedora-i18n-list/2004-November/msg00030.html ... where someone says: "You need to have httx (htt_xbe) running to use iiimf in KDE." Okay, so I go looking on the net for httx, but can't quite figure out what it is or how to download it. So my question is what is it, where do I get it, and will it help me get Japanese input? Now, for anyone who needs a reference, what follows is how I came to find out about httx. I was following the instructions on this page: http://fedora.redhat.com/projects/i18n/iiimf-faq.html And here are the results of some of the commands they suggest to check if iiimf is running in KDE: [root@localhost dave]# service iiim status htt (pid 3193) is running... [root@localhost dave]# rpm -qa |grep iiimf iiimf-csconv-12.1-13.EL iiimf-protocol-lib-11.4-43 iiimf-libs-devel-12.1-13.EL iiimf-libs-12.1-13.EL iiimf-gtk-12.1-13.EL iiimf-client-lib-11.4-43 iiimf-x-12.1-13.EL iiimf-gnome-im-switcher-12.1-13.EL iiimf-le-unit-12.1-13.EL iiimf-client-lib-devel-11.4-43 iiimf-server-12.1-13.EL iiimf-le-canna-12.1-13.EL iiimf-docs-12.1-13.EL iiimf-protocol-lib-devel-11.4-43 [root@localhost dave]# ps auxwww | grep httx root 4433 0.0 0.2 5272 664 pts/4 S+ 18:38 0:00 grep httx [root@localhost dave]# LANG=ja_JP.UTF-8 XMODIFIERS=@im=htt kedit QInputContext: no input method context available QInputContext: no input method context available When I went to Google to look up this error, that's when I eventually came across httx, but that's where I was stonewalled. I hope someone can help me get this last piece of the puzzle in place. Dave

4 5

Compiling kernel/drivers for hw RocketRaid 1640
by JN 08 Aug '05

08 Aug '05

I picked up a RocketRaid 1640 card b/c it had support for "RedHat". Apparently, their version of "RedHat" is "stable"(9), which I pointed out was "dead" for all security purposes... (at least, that was what I understood from someone in one of the RH/clone IRC channels.) It turns out that I need to build a new driver from their open source code. This task is a little over my head. (Appears to be a 'lot' over my head, but I'm assuming that it just looks bigger than it is b/c I keep reading "compiling a kernel isn't that hard..." ... yet, I've yet to be successful on any platform.) I'm in this mess because I recommended our company use Linux for a fileserver. I think that once it is up and running, it will be the rock-solid workhorse that I claimed it could be... however, I've got to get past this hurdle first. Is there a FAQ for compiling a new kernel specifically for CentOS 4.1? I've tried some of the generic flavored FAQs, but I tend to get confused with the differences between the flavors. (I was reading something in the slackware forums about using lilo as the first step to compiling a new kernel... ) -- the point is that someone tells me "CentOS is identical to RHEL 4", then I go and look at RHEL 4 docs, and they say that the source package for the kernel has been removed, and you need to download the RPM which is only available from them... I can't be sure, however, I don't think CentOS is identical in this way... Really, I'd like a FAQ for specific kernel compilation on CentOS 4.1, however, failing that, here are the error messages that I'm getting: In trying to follow this guide: http://crab-lab.zool.ohiou.edu/kevin/kernel-compilation-tutorial-en/index.h… , I was unable to complete step 4: first and foremost, there was no mention of rpm-build in that guide, which I was told I needed to install, and did, seemingly without issue. This was the next message I received: > [root@localhost jae]# rpm -ivh kernel-2.6.9-11.EL.src.rpm > 1:kernel warning: user builder does not exist - > using root > warning: group builder does not exist - using root > warning: user builder does not exist - using root ... Which I suspect was my own fault for trying to use a non-root script as root to install the kernel source. Exiting root status back into my user account yielded this: > sh: -c: line 0: unexpected EOF while looking for matching `"' > sh: -c: line 1: syntax error: unexpected end of file I have no idea what these messages are trying to tell me... but I did note further links in this guide, and ultimately modified /etc/rpm/macros, copying this code: http://users.tkk.fi/~tkarvine/rpm-build-as-user.html ... which resulted in more errors: > [j@localhost ~]$ sudo rpm -ivh kernel-2.6.9-11.EL.src.rpm > sh: -c: line 0: unexpected EOF while looking for matching `"' > sh: -c: line 1: syntax error: unexpected end of file > sh: -c: line 0: unexpected EOF while looking for matching `"' > sh: -c: line 1: syntax error: unexpected end of file > sh: -c: line 0: unexpected EOF while looking for matching `"' > sh: -c: line 1: syntax error: unexpected end of file > error: cannot create %sourcedir /rpmbuild/kernel ... Can someone *please* point me in the right direction? Thanks! -- J.N.

1 0

Bandwidth limiting
by Joe Klemmer 08 Aug '05

08 Aug '05

Since shapecfg is no longer part of the distro what are people using in place of cbq to limit/throttle bandwidth? I have an ftp mirror that, if left unchecked, will suck up the entire bandwidth of the CoLo site. TIA, Joe -- My Useless Vanity Page - http://www.webtrek.com/joe See my blog, sumo game ranks and other useless junk

4 8

KDE Upgrade from 3.3.1 to 3.4.2
by duffmckagan 08 Aug '05

08 Aug '05

I have downloaded the required KDE files (version 3.4.2)(I know what all files are required), and tried to simply upgrade using the rpm -Uvh command. But i began getting dependency problems. Now, what I did was searched google like a mad buffalo :P to find that missing files, and was successful to a great extent. But the weird thing was I got a few conflicts, which I can't around with. Please guide me what needs to be done. Here is the excerpt from the failure of dependency list . (the following are just the conflicts that are at fault. ----------------------------------------------------------------------------------------------------------------- kdeaddons < 0:3.3.90 conflicts with kdelibs-3.4.2-1.1.el4.kde.i386 kdeartwork < 0:3.3.90 conflicts with kdelibs-3.4.2-1.1.el4.kde.i386 kdebase < 6:3.3.90 conflicts with kdelibs-3.4.2-1.1.el4.kde.i386 ----------------------------------------------------------------------------------------------------------------- Hope you can help. -- "No-one dies a virgin. Life screws everyone."

4 7

Help required on pxe booting + installation of CentOS
by manish jain 08 Aug '05

08 Aug '05

Hi, I have a (bugridden, idiotic) fedora 4 server with tftpd, nfsd and dhcpd support. I want to remove fedora from my network and initiate pxe installation of CentOS Linux on all machines on my network from my fedora box. I have the CentOS's pxe-kernel and pxe-initrd images. I have also compiled fedora's pxeboot file from the sources and placed it in /tftpboot/. Can someone please guide me through the steps I need to take to get CentOS to boot via pxe from my box and install from an NFS-exported directory containing the whole CentOS distribution ? Thanks for any help. And thanks also for CentOS. Red Hat is just murdering Linux with its distributions - Fedora is a great reason for people to use Microsoft Windows. Manish Jain ____________________________________________________ Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs

3 2

proper use of alternatives framework
by Jim Perrin 08 Aug '05

08 Aug '05

So in a previous thread about java installs, I became more aware of /usr/sbin/alternatives and the links in /etc/alternatives. In an effort to not get lost in that thread (and mostly because it's a seperate topic and may help others when searching the list) I decided to posit my question directly. Rather than hack like a caveman at my installs of java and other things that fit into the alternatives framwork, I've been reading the man pages and googling, but sometimes I need things spelled out using crayons and small words. If someone has some documentation or insight about using the alternatives framework, including the --slaves options, I would be immensely appreciative. -- Jim Perrin System Administrator - UIT Ft Gordon & US Army Signal Center

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss