Discuss

discuss@lists.centos.org

1 participants
34730 discussions

data overrun on SCSI drive
by Bowie Bailey 17 May '05

17 May '05

I have a system that I just installed with CentOS 4.0. It is an HP NetServer E 60 with dual CPUs and 1G RAM. There is an Adaptec AIC-7895 built into the motherboard. On bootup, I get this: (scsi0:A:1): 11.626MB/s transfers (5.813MHz, offset 8, 16bit) (scsi0:A:1:0): data overrun detected in Data-in phase. Tag == 0x2. (scsi0:A:1:0): Have seen Data Phase. Length = 255. NumSGs = 1. sg[0] - Addr 0x03ace40 : Length 255 (scsi0:A:1:0): data overrun detected in Data-in phase. Tag == 0x3. (scsi0:A:1:0): Have seen Data Phase. Length = 255. NumSGs = 1. sg[0] - Addr 0x03ace40 : Length 255 (scsi0:A:1:0): data overrun detected in Data-in phase. Tag == 0x2. (scsi0:A:1:0): Have seen Data Phase. Length = 255. NumSGs = 1. sg[0] - Addr 0x03ace40 : Length 255 scsi scan: 255 byte inquiry failed with code 458752. Consider BLIST_INQUIRY_36 for this device Vendor: WDIGTL Model: WDE18300 ULTRA2 Rev: 1.30 Type: Direct-Access ANSI SCSI revision: 02 scsi0:A:1:0: Tagged Queuing enabled. Depth 4 SCSI device sdb: 35761710 512-byte hdwr sectors (18310 MB) SCSI device sdb: drive cache: write back sdb: sdb1 Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 How do I use BLIST_INQUIRY_36? Is there anything else I can try to fix this error? Also, is there a searchable archive for this list? Bowie

1 0

cashing named server
by Lee Parmeter 17 May '05

17 May '05

I started the named server on CentOS and it seems to resolve DNS request OK, but it does not seem to retain the info for very long. From what I can tell using "dig", a domain's ip address is retained for less than 12 hours. So in the morning, it takes 4+ seconds to resolve again the first time. Is there an adjustment somewhere for this or is the caching named support not enabled by default? Also, I thought it would be faster if I set named to use my ISP's named server as the first choice. Where do I set this up, in root.hints? Anyone who knows more about "named" please feel free to comment! Thanks! Lee __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

3 4

raidtab on centos 4
by Peter Farrow 17 May '05

17 May '05

Hi There, I re-installed Centos 4 on a box previously running x86 Solaris 10. After a reboot a got a BAD PBR SIG so I used rescue mode and grub to install a boot loader on each of my software-raided disks. Which works fine and allows me to boot ok. My question is, what happened to /etc/raidtab the machine boots ok and lists all the raid-1 devices I set up in the install (including the /boot partition) but there is no raidtab file. I tried using dmraid to take a look at the software RAID setup but it reports "No Software Raid" So my question is "what happened to mkraid commands and stuff like /etc/raidtab", /proc/mdstat reports fine... P.

2 1

centosplus and contrib rpms
by Farkas Levente 17 May '05

17 May '05

hi, it'd be useul if the centosplus and contrib directory can contain a small readme file or some kind of documentaion about the rpm inside. currently there is not any kind of such docs (ok johnny send a description about the kernel rpms, but if someone missed that email). eg the postfix rpm has the same description and changelog inside the rpm as the original ones. if someone just look into the ftp server then it'd be useful some kinf of docs. yours. -- Levente "Si vis pacem para bellum!"

11 24

spamassassin
by Craig White 16 May '05

16 May '05

pulling my hair out... If I rm -fr /root/.spamassassin/* then sa-learn a bunch of messages, it works... ]# sa-learn --dump magic 0.000 0 3 0 non-token data: bayes db version 0.000 0 3997 0 non-token data: nspam 0.000 0 0 0 non-token data: nham 0.000 0 202022 0 non-token data: ntokens 0.000 0 1086136394 0 non-token data: oldest atime 0.000 0 1116269429 0 non-token data: newest atime 0.000 0 1116269429 0 non-token data: last journal sync atime 0.000 0 1116269429 0 non-token data: last expiry atime 0.000 0 0 0 non-token data: last expire atime delta 0.000 0 0 0 non-token data: last expire reduction count then a few minutes later, it all goes to crap... # sa-learn --dump magic bayes: bayes db version 0 is not able to be used, aborting! at /usr/lib/perl5/vendor_perl/5.8.0/Mail/SpamAssassin/BayesStore/DBM.pm line 160. bayes: bayes db version 0 is not able to be used, aborting! at /usr/lib/perl5/vendor_perl/5.8.0/Mail/SpamAssassin/BayesStore/DBM.pm line 160. ERROR: Bayes dump returned an error, please re-run with -D for more information # rpm -qa spamassassin spamassassin-3.0.3-1.1.el3.rf # uname -srvo Linux 2.4.21-27.0.2.ELsmp #1 SMP Wed Jan 19 01:53:23 GMT 2005 GNU/Linux and lastly, for completeness... # spamassassin -p /etc/MailScanner/spam.assassin.prefs.conf -D --lint debug: SpamAssassin version 3.0.3 debug: Score set 0 chosen. debug: running in taint mode? yes debug: Running in taint mode, removing unsafe env vars, and resetting PATH debug: PATH included '/usr/kerberos/sbin', keeping. debug: PATH included '/usr/kerberos/bin', keeping. debug: PATH included '/usr/local/sbin', keeping. debug: PATH included '/usr/local/bin', keeping. debug: PATH included '/sbin', keeping. debug: PATH included '/bin', keeping. debug: PATH included '/usr/sbin', keeping. debug: PATH included '/usr/bin', keeping. debug: PATH included '/usr/X11R6/bin', keeping. debug: PATH included '/root/bin', which doesn't exist, dropping. debug: Final PATH set to: /usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin debug: diag: module installed: DBI, version 1.32 debug: diag: module installed: DB_File, version 1.811 debug: diag: module installed: Digest::SHA1, version 2.10 debug: diag: module installed: IO::Socket::UNIX, version 1.2 debug: diag: module installed: MIME::Base64, version 2.12 debug: diag: module installed: Net::DNS, version 0.48 debug: diag: module installed: Net::LDAP, version 0.30 debug: diag: module not installed: Razor2::Client::Agent ('require' failed) debug: diag: module installed: Storable, version 2.06 debug: diag: module installed: URI, version 1.21 debug: ignore: using a test message to lint rules debug: using "/etc/mail/spamassassin/init.pre" for site rules init.pre debug: config: read file /etc/mail/spamassassin/init.pre debug: using "/usr/share/spamassassin" for default rules dir debug: config: read file /usr/share/spamassassin/10_misc.cf debug: config: read file /usr/share/spamassassin/20_anti_ratware.cf debug: config: read file /usr/share/spamassassin/20_body_tests.cf debug: config: read file /usr/share/spamassassin/20_compensate.cf debug: config: read file /usr/share/spamassassin/20_dnsbl_tests.cf debug: config: read file /usr/share/spamassassin/20_drugs.cf debug: config: read file /usr/share/spamassassin/20_fake_helo_tests.cf debug: config: read file /usr/share/spamassassin/20_head_tests.cf debug: config: read file /usr/share/spamassassin/20_html_tests.cf debug: config: read file /usr/share/spamassassin/20_meta_tests.cf debug: config: read file /usr/share/spamassassin/20_phrases.cf debug: config: read file /usr/share/spamassassin/20_porn.cf debug: config: read file /usr/share/spamassassin/20_ratware.cf debug: config: read file /usr/share/spamassassin/20_uri_tests.cf debug: config: read file /usr/share/spamassassin/23_bayes.cf debug: config: read file /usr/share/spamassassin/25_body_tests_es.cf debug: config: read file /usr/share/spamassassin/25_hashcash.cf debug: config: read file /usr/share/spamassassin/25_spf.cf debug: config: read file /usr/share/spamassassin/25_uribl.cf debug: config: read file /usr/share/spamassassin/30_text_de.cf debug: config: read file /usr/share/spamassassin/30_text_fr.cf debug: config: read file /usr/share/spamassassin/30_text_nl.cf debug: config: read file /usr/share/spamassassin/30_text_pl.cf debug: config: read file /usr/share/spamassassin/50_scores.cf debug: config: read file /usr/share/spamassassin/60_whitelist.cf debug: using "/etc/mail/spamassassin" for site rules dir debug: using "/root/.spamassassin" for user state dir debug: using "/etc/MailScanner/spam.assassin.prefs.conf" for user prefs file debug: config: read file /etc/MailScanner/spam.assassin.prefs.conf debug: plugin: loading Mail::SpamAssassin::Plugin::URIDNSBL from @INC debug: plugin: registered Mail::SpamAssassin::Plugin::URIDNSBL=HASH (0x9d9d6dc) debug: plugin: loading Mail::SpamAssassin::Plugin::Hashcash from @INC debug: plugin: registered Mail::SpamAssassin::Plugin::Hashcash=HASH (0xa6c663c) debug: plugin: loading Mail::SpamAssassin::Plugin::SPF from @INC debug: plugin: registered Mail::SpamAssassin::Plugin::SPF=HASH (0xa6a9d54) debug: plugin: Mail::SpamAssassin::Plugin::URIDNSBL=HASH(0x9d9d6dc) implements 'parse_config' debug: plugin: Mail::SpamAssassin::Plugin::Hashcash=HASH(0xa6c663c) implements 'parse_config' debug: using "/root/.spamassassin" for user state dir debug: bayes: 25890 tie-ing to DB file R/O /root/.spamassassin/bayes_toks debug: bayes: 25890 tie-ing to DB file R/O /root/.spamassassin/bayes_seen debug: bayes: found bayes db version 0 bayes: bayes db version 0 is not able to be used, aborting! at /usr/lib/perl5/vendor_perl/5.8.0/Mail/SpamAssassin/BayesStore/DBM.pm line 160. debug: Score set 1 chosen. debug: ---- MIME PARSER START ---- debug: main message type: text/plain debug: parsing normal part debug: added part, type: text/plain debug: ---- MIME PARSER END ---- debug: bayes: 25890 tie-ing to DB file R/O /root/.spamassassin/bayes_toks debug: bayes: 25890 tie-ing to DB file R/O /root/.spamassassin/bayes_seen debug: bayes: found bayes db version 0 bayes: bayes db version 0 is not able to be used, aborting! at /usr/lib/perl5/vendor_perl/5.8.0/Mail/SpamAssassin/BayesStore/DBM.pm line 160. debug: metadata: X-Spam-Relays-Trusted: debug: metadata: X-Spam-Relays-Untrusted: debug: plugin: Mail::SpamAssassin::Plugin::URIDNSBL=HASH(0x9d9d6dc) implements 'parsed_metadata' debug: dns_available set to yes in config file, skipping test debug: decoding: no encoding detected debug: URIDNSBL: domains to query: debug: is Net::DNS::Resolver available? yes debug: Net::DNS version: 0.48 debug: all '*From' addrs: ignore(a)compiling.spamassassin.taint.org debug: Running tests for priority: 0 debug: running header regexp tests; score so far=0 debug: registering glue method for check_hashcash_double_spend (Mail::SpamAssassin::Plugin::Hashcash=HASH(0xa6c663c)) debug: registering glue method for check_for_spf_helo_pass (Mail::SpamAssassin::Plugin::SPF=HASH(0xa6a9d54)) debug: SPF: message was delivered entirely via trusted relays, not required debug: registering glue method for check_hashcash_value (Mail::SpamAssassin::Plugin::Hashcash=HASH(0xa6c663c)) debug: all '*To' addrs: debug: registering glue method for check_for_spf_softfail (Mail::SpamAssassin::Plugin::SPF=HASH(0xa6a9d54)) debug: SPF: message was delivered entirely via trusted relays, not required debug: registering glue method for check_for_spf_pass (Mail::SpamAssassin::Plugin::SPF=HASH(0xa6a9d54)) debug: registering glue method for check_for_spf_helo_softfail (Mail::SpamAssassin::Plugin::SPF=HASH(0xa6a9d54)) debug: registering glue method for check_for_spf_fail (Mail::SpamAssassin::Plugin::SPF=HASH(0xa6a9d54)) debug: registering glue method for check_for_spf_helo_fail (Mail::SpamAssassin::Plugin::SPF=HASH(0xa6a9d54)) debug: running body-text per-line regexp tests; score so far=-2.623 debug: running uri tests; score so far=-2.623 debug: registering glue method for check_uridnsbl (Mail::SpamAssassin::Plugin::URIDNSBL=HASH(0x9d9d6dc)) debug: Razor2 is not available debug: plugin: Mail::SpamAssassin::Plugin::URIDNSBL=HASH(0x9d9d6dc) implements 'check_tick' debug: running raw-body-text per-line regexp tests; score so far=-2.623 debug: running full-text regexp tests; score so far=-2.623 debug: Razor2 is not available debug: Pyzor is not available: pyzor not found debug: DCCifd is not available: no r/w dccifd socket found. debug: DCC is not available: no executable dccproc found. debug: Running tests for priority: 500 debug: RBL: success for 1 of 1 queries debug: plugin: Mail::SpamAssassin::Plugin::URIDNSBL=HASH(0x9d9d6dc) implements 'check_post_dnsbl' debug: running meta tests; score so far=-2.623 debug: running header regexp tests; score so far=-1.053 debug: running body-text per-line regexp tests; score so far=-1.053 debug: running uri tests; score so far=-1.053 debug: running raw-body-text per-line regexp tests; score so far=-1.053 debug: running full-text regexp tests; score so far=-1.053 debug: Running tests for priority: 1000 debug: running meta tests; score so far=-1.053 debug: running header regexp tests; score so far=-1.053 debug: running body-text per-line regexp tests; score so far=-1.053 debug: running uri tests; score so far=-1.053 debug: running raw-body-text per-line regexp tests; score so far=-1.053 debug: running full-text regexp tests; score so far=-1.053 debug: is spam? score=-1.053 required=5 debug: tests=ALL_TRUSTED,MISSING_DATE,MISSING_SUBJECT,NO_REAL_NAME debug: subtests=__HAS_MSGID,__MSGID_OK_DIGITS,__MSGID_OK_HOST,__SANE_MSGID,__UNUSABLE_MSGID

2 1

Re: Dual Monitors -- "nv" v. "nvidia"
by Bryan J. Smith <b.j.smith＠ieee.org> 16 May '05

16 May '05

From: Richard Humphrey <rlhumphrey(a)gmail.com> > Thanks that did the trick Although nVidia does put people on the Freedomware "nv" driver, and it can handle multiple framebuffers for Xinerama, VIVO (video in, video out), etc..., the Standardware "nvidia" driver is far easier to deal with for single framebuffer (no Xinerama) multiple displays, VIVO, etc..., in addition to adding GLX (OpenGL over X11) support. -- Bryan Political Notes: nVidia actually released the GLX code for the GeForce series back in the XFree86 3.3.x days, and obscuficated some of the code provided by 3rd parties (Intel's AGP trade secrets, SGI and Microsoft patented OpenGL, etc...). Unfortunately the community quickly started reverting the obscuficated code to the formal identifiers and other blocks that the 3rd parties didn't like to see, and lawsuits were threatened. So nVidia decided that it would no longer provide such code on the GLX portion once XFree86 4.0 came out with the ability to use binary drivers. The kernel memory-AGP interface driver portions are largely Intel's trade secrets, although it seems that is actually going GPL as Intel no longer considers AGP a trade secret, and PCIe (PCI-Express) is a formal PCISG standard. ATI should be also commended for attempting to build a "clean room" DRI/GLX implementation. But as lack of resources to continue to "fork" mounted along with lagging performance, ATI had to follow in nVidia's footsteps by creating a closed-source, but standards-driven unified driver by withholding specifications as of the R300 series (Radeon 9500+). Just like nVidia, the "clean room" GLX work is still available, and might even work on newer GeForce/Radeon cards, but the newer features of those cards are not documented. Lastly, it should also be noted that Matrox also has closed source drivers as well. If there is an industry that Microsoft is poised to strike the hardest on patents, it's OpenGL. They've con'd most of the graphics companies into giving them non- exclusionary rights to them -- especially SGI, the inventor. -- Bryan J. Smith mailto:b.j.smith@ieee.org

1 0

Re: Slashdot: "Could Microsoft buy Red Hat?" -- this is a joke made by the clueless
by Bryan J. Smith <b.j.smith＠ieee.org> 16 May '05

16 May '05

From: Nigel Kendrick <support-lists(a)petdoctors.co.uk> > Sorry if it wraps: > http://linux.slashdot.org/article.pl?sid=05/05/16/1758249&tid=109&tid=163&t… This has _nothing_ to do with Microsoft possibly buying Red Hat. People who even suggest this only expose their *0* understanding of business. Microsoft has an alliance with Sun. Why? Because it was in Microsoft's interest to do so. Ever since Microsoft lost the right to Java code, .NET has fallen behind in many areas. They merely relicensed Java, and began other initiatives. Largely as customers demanded interoperability. Same deal here. Red Hat products are now entrenched in everything from defense to financial. Most customers are now demanding more interoperability with Linux. Red Hat, due to their commercial marketshare, is going to be one of Microsoft's major targets. They already have some channels with Novell, but virtually _none_ with Red Hat. Red Hat is firmly committed to 100% GPL. In fact, Red Hat made dozens upon dozens of millions of dollars in purchases of software they GPL'd just last year, let alone the amount of direct employment of core GCC, GLibC, Linux kernel and other developers -- far more than even IBM. The only thing that Red Hat has had to bite on is the trademark issue due to US trademark common law, ironically something that Sun -- more than any other company -- caused. People think of Red Hat in terms of Microsoft, and from an "exclusive contracts" viewpoint, they seem similar. But Red Hat is two companies -- the latter and, by far, the largest portion both expense and labor-wise -- is the largest collection if GPL-centric projects. Red Hat, much like the Cygnus entity it engulfed even when it was much smaller than Cygnus at the time, has made their entire software focus on GPL to the anal power. Red Hat knows should they ever change from that, they will lose everything -- especially mindshare. -- Bryan J. Smith mailto:b.j.smith@ieee.org

1 0

Slashdot: "Could Microsoft buy Red Hat?"
by Nigel Kendrick 16 May '05

16 May '05

Sorry if it wraps: http://linux.slashdot.org/article.pl?sid=05/05/16/1758249&tid=109&tid=163&ti d=110&tid=98&tid=218 Enjoy!

1 0

RE: [CentOS] clamav-0.85
by Bowie Bailey 16 May '05

16 May '05

From: Dag Wieers [mailto:dag@wieers.com] > > On Mon, 16 May 2005, Maciej Zenczykowski wrote: > > > > Well, I could, but why would you use ncftp when lftp is actually more > > > feature complete and much better overall. (ncftp is not open source > > > actually). > > > > > > If there's a good reason you might convince me to do the extra work. > > > > Well, this came up because perl CPAN wants to use ncftpget to download > > files, and it couldn't find it on my system... does lftp contain a > > functional equivalent? > > It includes lftpget. It seems strange to me that CPAN is using ncftp and > does not look for any alternatives. You may have to look into that first. I seem to remember that CPAN prompts for your ftp client when you do the initialization. You may want to go through that process again and specify lftpget when it asks. $ perl -MCPAN -e shell cpan> o conf init Bowie

2 1

Adding/Removing Headers with Sendmail
by Lee W 16 May '05

16 May '05

Hi, I posted this query a few weeks ago but never received a response. I'm guessing that I didn't put things right, so here is another go. The company that I work for currently has email addresses in the format of:- firstname.surname.ext(a)example.com Which we use for various marketing campaigns (therefore the .ext bit is variable). Currently we have this setup as distribution lists with exchange so that any email that goes to this addressess goes both to the sales person and to a catch all mailbox which is then input into our systems. I was wondering if it would be possible so that when an email is received to this format of address it automatically determines where to send it as follows An email comes into joe.bloggs.sa...(a)example.com this then gets split so that it is delivered to joe.blo...(a)example.com and also s...(a)example.com. I think that i have figured out how to rewrite to the second address but how can I get it to send it to the new address as well. I was hoping there would be a way of doing this automatically so that we don't have to setup these addresses for every new starter and they apply on a global basis. Hopefully that explains better what I am after. Regards Lee

5 9

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss