Discuss

discuss@lists.centos.org

5 participants
34752 discussions

dcfldd
by Jerry Geis 03 Sep '21

03 Sep '21

Hi all I did a "yum install dcfldd" on Centos7. I plugged in my USB HUb, plugged in 3 disks I want to duplicate Verified each disk plugged in run the command dcfldd if=myimg.img of=/dev/sdd of=/dev/sde of=/dev/sdf No errors no nothing, Said "writing" the whole time - when done it said 8248Mb Written But the image was not actually written to the three disks. It still just has a single partition - the default partition. Am I doing something wrong ? Thanks, Jerry

2 2

Re: [CentOS] Troubles expanding file system.
by Jeff Boyce 03 Sep '21

03 Sep '21

I realized I was still on receiving the daily digest format last night, so I have probably screwed up the threading on this now. If you cc me directly maybe I can maintain the future threading. Ok, looking at Parted it looks like the resize (or resizepart) command will be what I will need. But that doesn't appear to help recognize the expanded disk, so I think I need something before that. That is what I thought the echo 1 > rescan would do for me. I will look more into fdisk to understand the capabilities there. I am going to take advantage of the holiday weekend in a few days to take care of this so I am trying to understand all of the options available to me before diving into the task. In response to Gordon also, I did rescan the drive as suggested and got the same results; no such file or directory. So then I did a search for the rescan file to see where it was present. Found it in a few locations, but this one looks to be the one that I would want to try. /sys/devices/pci0000:00/0000:00:01.1/host1/target1:0:0/1:0:0:0/ The rescan file was also located in just: /sys/bus/pci but don't know if that would do the job for the specific device. Thanks for everyone's input. Very helpful. More suggestions are welcome while I am still reading up on options. Jeff Date: Wed, 1 Sep 2021 13:15:37 -0400 From: Stephen John Smoogen<smooge(a)gmail.com> To: CentOS mailing list<centos(a)centos.org> Subject: Re: [CentOS] Troubles expanding file system. Message-ID: <CANnLRdhhRkMagTcZ+eqALoteYcXD26nMrHzv7L9F1A35jGS=3g(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" On Wed, 1 Sept 2021 at 12:42, Jeff Boyce<jboyce(a)meridianenv.com> wrote: > Greetings - > > I have tried posting this four times now, from two different email > addresses (on the 25th, 27th, 30th, and 31st) and it never appeared. I > don't see it in the archives, so it appears to be getting dropped in > transition for some reason. I am not getting messages from the email > system saying it is undeliverable, or is bounced; I am sending as plain > text, not HTML, I stripped off my signature. If this makes it through, > someone please give me a clue why the others might not have. But that > is not as important as the real issue that I am trying to get addressed > below. Thanks for any assistance. > > I have a Dell PowerEdge server with a CentOS KVM host (Earth) with > one CentOS guest (Sequoia) that I am trying to expand the partition and > filesystem on. I have LVM logical volumes on the host system (Earth), > which are used as devices/partitions on the guest system (Sequoia). In > this particular situation I have successfully extended the logical > volume (lv_SeqEco) on Earth from 500GB to 700GB. > > 1. Checking the disk information (lsblk) on Earth shows that the > logical volume (lv_SeqEco) is now listed as 700GB. > > 2. Checking disk information (lsblk) on Sequoia shows that the disk > /dev/vde is still listed as 500GB, and partition /dev/vde1 where the > mount point /ecosystem is located is also listed as 500GB. > > 3. I had tried using the resize2fs command to expand the filesystem on > /dev/vde1, but it returned with the result that there was nothing to > do. Which makes sense now after I checked the disk information, since > /dev/vde on Sequoia has not increased from 500GB to 700GB. > Thanks for the long list of items of what you have done. In Fedora Infrastructure, we used this method to resize images in the past https://pagure.io/infra-docs/blob/main/f/docs/sysadmin-guide/sops/guestdisk… The guest system usually needs to have the `fdisk` , `gdisk` or `parted` commands rerun to resize the disk to its new size. > 4. On previous occasions when I have done this task, I would just start > GParted on Sequoia and use the GUI to expand the partition and > filesystem. A real quick and simple solution. > > 5. The problem I have now is that the VGA adapter on my server has died > and I have no graphical output to the attached monitor, nor to the iDrac > console display. So I am stuck doing this entirely by the command line > while logged into the system remotely. > > 6. I suspect that I need to rescan the devices on Sequoia so that it > recognizes the increased space that has been allocated from the extended > the logical volume. But when I did that (command below) it came back > with a no such file or directory. > > echo 1 > /sys/class/block/vde1/device/rescan > Not sure that would do anything. > 7. This server is being retired in the next few months, but I need this > additional space prior to migrating to the new system. Can someone give > me some guidance on what I am missing in this sequence? > > Let me know if I haven't been clear enough in the explanation of my > systems and objective. Thanks.

4 4

CentOS-announce Digest, Vol 198, Issue 1
by centos-announce-request＠centos.org 02 Sep '21

02 Sep '21

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2021:3327 Important CentOS 7 kernel Security Update (Johnny Hughes) 2. CEBA-2021:3332 CentOS 7 resource-agents BugFix Update (Johnny Hughes) 3. CESA-2018:3140 Moderate CentOS 7 gvfs Security Update (Johnny Hughes) 4. CESA-2020:1021 Moderate CentOS 7 gnome-settings-daemon Security Update (Johnny Hughes) 5. CEEA-2019:0045 CentOS 7 virt-what Enhancement Update (Johnny Hughes) 6. CESA-2021:3325 Moderate CentOS 7 bind Security Update (Johnny Hughes) 7. CESA-2021:3336 Important CentOS 7 sssd Security Update (Johnny Hughes) 8. CESA-2021:3338 Low CentOS 7 hivex Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 31 Aug 2021 21:19:47 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2021:3327 Important CentOS 7 kernel Security Update Message-ID: <20210831211947.GA23775(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2021:3327 Important Upstream details at : https://access.redhat.com/errata/RHSA-2021:3327 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 5b19e42e03ab5ffdc24e71ec6c71dd0d4c8a557e482b142cb58bd7eaf529174a bpftool-3.10.0-1160.41.1.el7.x86_64.rpm f181f4bc3868b84eb350197aee4e79d0466d5aaac0e0a70a37eb58aa7533e228 kernel-3.10.0-1160.41.1.el7.x86_64.rpm a5f9b329bc1130ffe9bf6f2ced3317e2ad895c4559a82bdf804c8b85e4765b28 kernel-abi-whitelists-3.10.0-1160.41.1.el7.noarch.rpm 22e7b5d6e46a23025f394d1dd9e25e4e5cfd1c5dbb00f74226f20929ee065bd9 kernel-debug-3.10.0-1160.41.1.el7.x86_64.rpm 72dc266e5da09e38d19f4c3904bdb983146af68adbe466120ff8bfecdb4567bf kernel-debug-devel-3.10.0-1160.41.1.el7.x86_64.rpm e888a6e4abc3928d95ec0b18f8a42febb63ba70ba0371c23615b8823209d9317 kernel-devel-3.10.0-1160.41.1.el7.x86_64.rpm 5573691deaca712e1478b3d889fe322be138680d8955a04b75e3a0066e099ca2 kernel-doc-3.10.0-1160.41.1.el7.noarch.rpm 3c1d7d5a10b6bbb96820657c57af7a774ba60dd1acb011d623b218102b3251f3 kernel-headers-3.10.0-1160.41.1.el7.x86_64.rpm 3ce3178d47c0937ca4073ad24a4d21e17880a93c83bed7d7cdde515bda87c789 kernel-tools-3.10.0-1160.41.1.el7.x86_64.rpm 7c45ba29959e72ceece7bd3f48bcc0ce0a86ebce4677a50e9d95a46e172b5d3b kernel-tools-libs-3.10.0-1160.41.1.el7.x86_64.rpm 69c2b3156d7f7348e92c9b6d94a15da2b8f77e0597041944eb9741c941e07001 kernel-tools-libs-devel-3.10.0-1160.41.1.el7.x86_64.rpm 82af7be38d0c8eb49df265c4c0138bdc35cb7ac26a1b6e3a4d0f0a47d293dc93 perf-3.10.0-1160.41.1.el7.x86_64.rpm b5008882f07f8c6c00a0b544313ead5522d4d71ffce67d2a4c5c59a41e89e091 python-perf-3.10.0-1160.41.1.el7.x86_64.rpm Source: ecb824f2bd03d2d305e5d081734d1dbc420ddcf2a7ce2bcebe7a86f58756b23c kernel-3.10.0-1160.41.1.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Wed, 1 Sep 2021 12:51:12 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2021:3332 CentOS 7 resource-agents BugFix Update Message-ID: <20210901125112.GA25046(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2021:3332 Upstream details at : https://access.redhat.com/errata/RHBA-2021:3332 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: daae913efb6e4874bfa75dfcd0e5d7e7a5608566622349ab0a84cb1fb2583e70 resource-agents-4.1.1-61.el7_9.13.x86_64.rpm 69e3af51dee6dd3aca7ef07201a7beeaa6d764016a11afffdabce904928aee48 resource-agents-aliyun-4.1.1-61.el7_9.13.x86_64.rpm 7f1d9434068b1dab6eb2d4673f1f11fee7c197500b464616bdb606f4cb097f8e resource-agents-gcp-4.1.1-61.el7_9.13.x86_64.rpm Source: 5e5d70ba5f2751b5ad64d0956f9c64d159f2ff334622e87aabf84c6847a8065b resource-agents-4.1.1-61.el7_9.13.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Wed, 1 Sep 2021 12:51:57 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2018:3140 Moderate CentOS 7 gvfs Security Update Message-ID: <20210901125157.GA25370(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2018:3140 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2018:3140 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 717c6856842ddb6b4eca2817cbb3adfce002d371a61b322c8c74761e57ae5bcf gvfs-1.36.2-5.el7_9.i686.rpm 28f3ff68224de0783083894b44eefc57e4833a53461ce91f1f4656bbc1b0eb9f gvfs-1.36.2-5.el7_9.x86_64.rpm dc73b498dea020241c15f040008e6f96731b9a67cfa83b452c60a9d4510edd41 gvfs-afc-1.36.2-5.el7_9.x86_64.rpm cce9b9d8e55d003cd7be906f5603d626c0f14b8e422e5123076eb85b9dab7694 gvfs-afp-1.36.2-5.el7_9.x86_64.rpm 35f5c229e131ffb525fc38628dbe4dc399fd7f6077f047e169dc8e5ddcce20e8 gvfs-archive-1.36.2-5.el7_9.x86_64.rpm 51af7b29f1554b6ee4cfc1be4f18e91dcb17d8795d87ad960cb26d3fe381cc64 gvfs-client-1.36.2-5.el7_9.i686.rpm b95af4b262010256013a4265ab61dfb37bf37e1d4ca12de8b007b315ae8a9b1c gvfs-client-1.36.2-5.el7_9.x86_64.rpm 0b42148789300af59e74814b7d8cb50a3c1453dc197a498f2f37cdc75a6a97d7 gvfs-devel-1.36.2-5.el7_9.i686.rpm 34a08308f948f94b0ad18d9d233e22453d984465c89a58935ec1185d071e7f4d gvfs-devel-1.36.2-5.el7_9.x86_64.rpm 72fedcf3bf921b3e8efb6e27a94cc4edfe624334e5b7a143442d707cfb625b06 gvfs-fuse-1.36.2-5.el7_9.x86_64.rpm 96f852d003908ae51e7c33a2d18e329760dd559b5ca3c8a594e3d2a5ebf41ce5 gvfs-goa-1.36.2-5.el7_9.x86_64.rpm cc2af8b460ae945f1afdf5f03ea0b48e40aa3372a33d96e0408d1256c8c0294e gvfs-gphoto2-1.36.2-5.el7_9.x86_64.rpm b9b11e2c45c327237aea9d0fd84d0d41db9d2a4137822d95f71cedd3ae9145c2 gvfs-mtp-1.36.2-5.el7_9.x86_64.rpm 09277f1295e2db1f4f90bd3fce359dd8150009233cbba997650480e544b67766 gvfs-smb-1.36.2-5.el7_9.x86_64.rpm 3cf6225627d15b57e6db240be4821a47a55d2bf482e4fe8f1928862282e7998e gvfs-tests-1.36.2-5.el7_9.x86_64.rpm Source: 82da6639d664c95a4d729c4eed382b4cd81225931690ad9a382bf4bdbdaaee11 gvfs-1.36.2-5.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Wed, 1 Sep 2021 12:52:11 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2020:1021 Moderate CentOS 7 gnome-settings-daemon Security Update Message-ID: <20210901125211.GA25532(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2020:1021 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2020:1021 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: d6af98392b986204b8b504202adcf13ec1eca355c819f9d4a1ee4d8448a14c55 gnome-settings-daemon-3.28.1-11.el7_9.i686.rpm c4456d3a9934c3fe90a0750649cc735745508843da43735b39aa5cdcaadb99a4 gnome-settings-daemon-3.28.1-11.el7_9.x86_64.rpm 821df7321c6fd01dc77f9435ba556d7b08cfdfdb262113c4223883e34adeedf3 gnome-settings-daemon-devel-3.28.1-11.el7_9.i686.rpm 86f47f4e0ba937bd5cc3e11936092ae2624f85a10417a53a3620844161158224 gnome-settings-daemon-devel-3.28.1-11.el7_9.x86_64.rpm Source: e50add1de7f992a1bc7b2e3b473d93608bc3adce5befd58a15abaa2437ec9e9b gnome-settings-daemon-3.28.1-11.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 5 Date: Wed, 1 Sep 2021 12:52:20 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEEA-2019:0045 CentOS 7 virt-what Enhancement Update Message-ID: <20210901125220.GA25696(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2019:0045 Upstream details at : https://access.redhat.com/errata/RHEA-2019:0045 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: f6645c7cbc24d07e153f2c8892cf815d6c7edf416985b8afe81d4a7af9562adc virt-what-1.18-4.el7_9.1.x86_64.rpm Source: 18a66bb9becc475876141d6a10dc33f11d18c487facb3a991ba2c660a7b7d49c virt-what-1.18-4.el7_9.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 6 Date: Wed, 1 Sep 2021 13:02:58 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2021:3325 Moderate CentOS 7 bind Security Update Message-ID: <20210901130258.GA26529(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2021:3325 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2021:3325 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 7200ad28455e7f8044a9521a187ff712e7d782e9a38db84d1c18e9b54e7a9a28 bind-9.11.4-26.P2.el7_9.7.x86_64.rpm ae6ecf30bc0a1b8e2c0c2d8702e3eaf7db4864987e02a301446311ff1594d050 bind-chroot-9.11.4-26.P2.el7_9.7.x86_64.rpm dfe4993ac8d4d097c4e5e97fc006d27039a6a3d4cc79f87f4d56c9e79afd3a86 bind-devel-9.11.4-26.P2.el7_9.7.i686.rpm 337b3b492087333d675bf644cd7cab27fad998fd2eb5f3f1064b766e5fbf85c1 bind-devel-9.11.4-26.P2.el7_9.7.x86_64.rpm 620e6945f7639eacc1508005775c37d66e64ae3f5ec915e87d132a17a45d3999 bind-export-devel-9.11.4-26.P2.el7_9.7.i686.rpm ddbc53b44a7ec6dd175840df4ba96e8440a167aca06195e38f9ce8e768f82f30 bind-export-devel-9.11.4-26.P2.el7_9.7.x86_64.rpm d1270ff691bc97bc9a737c8556081408a04f2a325ffb0db2fb561a7add15d0e6 bind-export-libs-9.11.4-26.P2.el7_9.7.i686.rpm 5af6b82a47585513d5a6a8ccc974d524ebc2a67fba642652aa75b566045b004c bind-export-libs-9.11.4-26.P2.el7_9.7.x86_64.rpm fc93fa73ee589349b26030b1fd56173975859786d624ddeaf826606e99c8b4f3 bind-libs-9.11.4-26.P2.el7_9.7.i686.rpm 2c72fd0a8014e13440ebde0c0ae037cea29cc8aa567b3723619486dc2040f9e5 bind-libs-9.11.4-26.P2.el7_9.7.x86_64.rpm 23886775cbbf0f0b980d7e700a1fa3cce9ae8149522a191554e770fe0acf1813 bind-libs-lite-9.11.4-26.P2.el7_9.7.i686.rpm f9e741d7af4fbcb102cf759697c858701bf8839ced08a5f62c9415ac5de9dda3 bind-libs-lite-9.11.4-26.P2.el7_9.7.x86_64.rpm 417df6c01f4373a219da10ea1df04e2565b5b27e4710818aa6718065c174f25f bind-license-9.11.4-26.P2.el7_9.7.noarch.rpm f0c0b3f210497c3d560f42df97307f09afe0cd687c2e08ebc1cb7b03e28b8319 bind-lite-devel-9.11.4-26.P2.el7_9.7.i686.rpm 9744361dc7129978289b5a40fcacd9f52369b57774ec2256bc3c078d4d6e8f03 bind-lite-devel-9.11.4-26.P2.el7_9.7.x86_64.rpm 4d2dbd65fa67b8c23648a188f830340cc1da72b5dbc71795229022de0ff9720d bind-pkcs11-9.11.4-26.P2.el7_9.7.x86_64.rpm d4718c0bcf9365bfcd07e9c307952a12ae32802cbc6bde5707222c30c90cbb85 bind-pkcs11-devel-9.11.4-26.P2.el7_9.7.i686.rpm 5ca5234e59243cc5ced75e11bc9ad434a82d86c5fa5eab71a130bd3c3ae49334 bind-pkcs11-devel-9.11.4-26.P2.el7_9.7.x86_64.rpm 3d4d0d965fc073d950dd63507c1b1287648ef59c103d02cf09891c04bd99e930 bind-pkcs11-libs-9.11.4-26.P2.el7_9.7.i686.rpm 32f0185e8d6a9ab586922827519f1f38fb921fcaff260385904d3e61dd029d44 bind-pkcs11-libs-9.11.4-26.P2.el7_9.7.x86_64.rpm f7789c32ac34827df4b6c180e845361bb70aa1fcbc165a6c2a533559f2bc3f76 bind-pkcs11-utils-9.11.4-26.P2.el7_9.7.x86_64.rpm ca5ee1ff2a858d3eaf6bbed3a7c0421519183d99018689b9d2bfb4f8b2bdb122 bind-sdb-9.11.4-26.P2.el7_9.7.x86_64.rpm 850be6d438290af4b3c31805a40c2f8a88e4e751bafa1bb02b6b884736f80ef2 bind-sdb-chroot-9.11.4-26.P2.el7_9.7.x86_64.rpm 0834c02bc349eaabe64a4015d07ee7cbcf7776a68766e81cd93be0a58c7d5465 bind-utils-9.11.4-26.P2.el7_9.7.x86_64.rpm Source: e3a2f06f743ffed5ef8e29fc9cd18fbf075c9e6fac1f47cceac97e15598c3cbb bind-9.11.4-26.P2.el7_9.7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 7 Date: Wed, 1 Sep 2021 13:06:57 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2021:3336 Important CentOS 7 sssd Security Update Message-ID: <20210901130657.GA27136(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2021:3336 Important Upstream details at : https://access.redhat.com/errata/RHSA-2021:3336 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 1db80fc0b7ec4ad66d1f7b86e831c3ed4d4386b1db1558cc7afcecf08ff5184e libipa_hbac-1.16.5-10.el7_9.10.i686.rpm 7bb7db4c0e3b5dbb711a2589b4e752e8fe25c9b73185eaa3eecc00450d613c21 libipa_hbac-1.16.5-10.el7_9.10.x86_64.rpm 9ddb3989f547bec0175c3f866ce77a6ac4742203e5567fcd03af76e451568f49 libipa_hbac-devel-1.16.5-10.el7_9.10.i686.rpm 79b1198c3958d0c5aaf003eb2c5f482ad658aac62e3b7fe05127e6498153d891 libipa_hbac-devel-1.16.5-10.el7_9.10.x86_64.rpm f5d9885773ed21397aa08232737d51af6803c1358395a2168b6820ce496d927f libsss_autofs-1.16.5-10.el7_9.10.x86_64.rpm 905b3f686bda411e8b1469cccabec8ed3ae99a60153880597dd656cabc81a501 libsss_certmap-1.16.5-10.el7_9.10.i686.rpm e668a6070cd6a22b4de750baa84e146e8e064e1a05849a958600f9b2d6b51c0d libsss_certmap-1.16.5-10.el7_9.10.x86_64.rpm d2d65f2dde15fdba0abf08f0eba0a75c42ca7a41d64da706060132398e03a472 libsss_certmap-devel-1.16.5-10.el7_9.10.i686.rpm b16a84b46233f40caa0d30fca524f23408cdf7301cecddbe17cc7b23be9336c9 libsss_certmap-devel-1.16.5-10.el7_9.10.x86_64.rpm 3c2c5a9be0e4c30b02e5553db78d0a3f434bf544273422faeab125baf392165e libsss_idmap-1.16.5-10.el7_9.10.i686.rpm a06df499751c88597c0ff2c9e3571f888ef5f4c900179b21dd22799ec89b624a libsss_idmap-1.16.5-10.el7_9.10.x86_64.rpm 21c9f734ac2660b9ca8602966521796728c6e3830a5aa75fda5d6c6674d2f5d3 libsss_idmap-devel-1.16.5-10.el7_9.10.i686.rpm f7bd069d04d994e785e1883f97be7c9af76091600cb13d99b634f878bb79c5e0 libsss_idmap-devel-1.16.5-10.el7_9.10.x86_64.rpm da23c291f94eaf3fa1751e0812449824e582ca5853fa7e71e730f6f1fb2e0327 libsss_nss_idmap-1.16.5-10.el7_9.10.i686.rpm d41f2ba7244ea561f95aae87e10fc0d097ee72ed2f5cf1cb1e7455374f1add83 libsss_nss_idmap-1.16.5-10.el7_9.10.x86_64.rpm 40fbdb5955ea06836fc5cd49841d43c8ca177c4a345a3731b7fdcb0e482fcde0 libsss_nss_idmap-devel-1.16.5-10.el7_9.10.i686.rpm 5016630a65d39bcfb9fe686d8dda94e2b896afc8b8c41f7c29a6bc5d3305884e libsss_nss_idmap-devel-1.16.5-10.el7_9.10.x86_64.rpm 82615b5f75a4fb89fd8a9662bc57f478e82e61656145912b4cf6dc7349a9b42d libsss_simpleifp-1.16.5-10.el7_9.10.i686.rpm 5d59acc61e4c24682f9a5b9b41b1c5f8974de87c4a1fb4e029e9131a51888c38 libsss_simpleifp-1.16.5-10.el7_9.10.x86_64.rpm 5ee8683f8c93ce6cd407d16531478f99660fed0dd9f582ce317a1aeb518e6484 libsss_simpleifp-devel-1.16.5-10.el7_9.10.i686.rpm 7fdb130eab949bc403e1c3601e83e6c3cbc7954955279ba1bea21124e1e5de38 libsss_simpleifp-devel-1.16.5-10.el7_9.10.x86_64.rpm fc910dd4afd1311d8be1bdce2147613448f4162c19797bb345c5b725efff1d08 libsss_sudo-1.16.5-10.el7_9.10.x86_64.rpm 9988a58fd1793b7bc5fef2c748a853a2c83650e825e9d524d12cccb139f1068c python-libipa_hbac-1.16.5-10.el7_9.10.x86_64.rpm a4b2a180e6418f7810ccfa0cbf722ce37a6133dc60adeb0ef64356a61444a32b python-libsss_nss_idmap-1.16.5-10.el7_9.10.x86_64.rpm 64577751243751eedbe850fc528ea04d250e8a953a86f23a1a44bf84dfdd8e77 python-sss-1.16.5-10.el7_9.10.x86_64.rpm 1006f493d08b88033474d82a195562d019c3fcf80328843dd0d8bb351e49ab25 python-sssdconfig-1.16.5-10.el7_9.10.noarch.rpm 88ab2f3a84ae0b670762548a3b07213bc1a96a8249ebb3ac49b9d659b4187823 python-sss-murmur-1.16.5-10.el7_9.10.x86_64.rpm 96e8afde7554bf087d7015345cb62d8833fcecf0f4165e71ec3a77681591973d sssd-1.16.5-10.el7_9.10.x86_64.rpm ff3b468571e583e09e30108bb68b5b52e5aa7c6c634076708aa4dbbf6d6a6c7e sssd-ad-1.16.5-10.el7_9.10.x86_64.rpm 772df4394d584927dcf77fefe3909f14263b4a632dfec53f011d34b412b30d8c sssd-client-1.16.5-10.el7_9.10.i686.rpm fbd39d1a8897fa30ac649d4e1c6652bada403accff15f98abb244507a91a8494 sssd-client-1.16.5-10.el7_9.10.x86_64.rpm b0d0a9428e29aa54f6cf8736a355da73553cc5c4e20f0795d6faf0e6cab0ce49 sssd-common-1.16.5-10.el7_9.10.x86_64.rpm 826c87462956fa022a02326f271d542600fd73a7be32feb4eb7108cbc8b45eee sssd-common-pac-1.16.5-10.el7_9.10.x86_64.rpm 65a42ec733799dc8d274d0582c47380210b9ba82d7d6c4e9bb2f2cc9e93e54ae sssd-dbus-1.16.5-10.el7_9.10.x86_64.rpm ddd921add46e38c9947a1be713846fcb866f41a25bf6671f3a81e65cc5ae6906 sssd-ipa-1.16.5-10.el7_9.10.x86_64.rpm 62e79c444efc16b710b9f1e149bb3fee5abb2dea036b57e363ce6cc8d48b4c6d sssd-kcm-1.16.5-10.el7_9.10.x86_64.rpm a488570f9d11e747c97f57e3754398d4b317a95c8b12a89765afa51f7a8d5b3c sssd-krb5-1.16.5-10.el7_9.10.x86_64.rpm 0e83fd6b33039ac7fda9317c440371d5e1d6e4173afb995bd498be0589efbf51 sssd-krb5-common-1.16.5-10.el7_9.10.x86_64.rpm e65eedfb0130d1f3e59f5a4547b25b0e1994042c06fb9833816fdb384c062165 sssd-ldap-1.16.5-10.el7_9.10.x86_64.rpm d12ea2121d6e19b9305bc2887e981903b907ef5b7969c1672e397a125e33f070 sssd-libwbclient-1.16.5-10.el7_9.10.x86_64.rpm c72baaba3b68e23ad5857f22697380908c1ca9201e4bbe875f13601fc99a9465 sssd-libwbclient-devel-1.16.5-10.el7_9.10.i686.rpm b554c183bd7760a4c29b178039f5b3746c8549c6a6d40686cd8b4f7a5314ba26 sssd-libwbclient-devel-1.16.5-10.el7_9.10.x86_64.rpm cbe559a32b73c61ade8a92a3d95bf1f0a39b70082feed6bbf79aaff46a5ddf19 sssd-polkit-rules-1.16.5-10.el7_9.10.x86_64.rpm 4d57a9eb757639f05691dc0a674b6cde76770c459608cab6a9a6bc054d091f7f sssd-proxy-1.16.5-10.el7_9.10.x86_64.rpm d1505aaf07075307e949adfd5133dbffded6e90d371bddf5dd1e04c913a8a7b7 sssd-tools-1.16.5-10.el7_9.10.x86_64.rpm 9e34155e9955877814c45bc4c249bf6c38112821f536ccc4baefe4ed42298b48 sssd-winbind-idmap-1.16.5-10.el7_9.10.x86_64.rpm Source: 5cd1a64e99b3346745ae4e478eccb1a3755c31c56fb73357e80b0cc014a2b56c sssd-1.16.5-10.el7_9.10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 8 Date: Wed, 1 Sep 2021 13:09:31 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2021:3338 Low CentOS 7 hivex Security Update Message-ID: <20210901130931.GA27377(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2021:3338 Low Upstream details at : https://access.redhat.com/errata/RHSA-2021:3338 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 79eacef92a2947aefaab902e53fada60dc27d9c173b1e175f1ce4db04d6c653e hivex-1.3.10-6.12.el7_9.i686.rpm ace18d3c4c3acb71a8d4c5a6930f0ae58e655462938d91d3ef45aef7694df479 hivex-1.3.10-6.12.el7_9.x86_64.rpm d39fb02417c772d1ee5c9eb6d9a3981e59719475b6865e25c7e431882fec497b hivex-devel-1.3.10-6.12.el7_9.i686.rpm 233182440f451ea41600279219e708b82494832752dd921ec2f2e4c0ab2a7353 hivex-devel-1.3.10-6.12.el7_9.x86_64.rpm 27554b9b56bcf99ec38c5aac4a10faefaeb0b46d53264ec179036107f7c5461f ocaml-hivex-1.3.10-6.12.el7_9.x86_64.rpm e256274cc5f1a6f7f97af45288258ffc553c2f425401d35928622845d32c4465 ocaml-hivex-devel-1.3.10-6.12.el7_9.x86_64.rpm eb68b066fac31ef1d13db384711879546250d149147a9bfbe0a62bd5f62d0bca perl-hivex-1.3.10-6.12.el7_9.x86_64.rpm 0eaade45e4faa7e8e8b18e0ab2d01b531ee0b40d37435cff287a385b544dea75 python-hivex-1.3.10-6.12.el7_9.x86_64.rpm 1802f181e6589961ea6d796ae4920da55d454d730791ccea8f2c37d1dc609c37 ruby-hivex-1.3.10-6.12.el7_9.x86_64.rpm Source: b5423201c1fa916848c84330889450c9f14e060b5f991769a41acd7b445b2619 hivex-1.3.10-6.12.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 198, Issue 1 ***********************************************

1 0

Mementos
by mark 01 Sep '21

01 Sep '21

Cleaning up, and found something relevant here: anyone want a memento - I have an original RH 5.2 set. No, not RHEL, I said RH 5.2 mark

3 3

Troubles expanding file system.
by Jeff Boyce 01 Sep '21

01 Sep '21

Greetings - I have tried posting this four times now, from two different email addresses (on the 25th, 27th, 30th, and 31st) and it never appeared. I don't see it in the archives, so it appears to be getting dropped in transition for some reason. I am not getting messages from the email system saying it is undeliverable, or is bounced; I am sending as plain text, not HTML, I stripped off my signature. If this makes it through, someone please give me a clue why the others might not have. But that is not as important as the real issue that I am trying to get addressed below. Thanks for any assistance. I have a Dell PowerEdge server with a CentOS KVM host (Earth) with one CentOS guest (Sequoia) that I am trying to expand the partition and filesystem on. I have LVM logical volumes on the host system (Earth), which are used as devices/partitions on the guest system (Sequoia). In this particular situation I have successfully extended the logical volume (lv_SeqEco) on Earth from 500GB to 700GB. 1. Checking the disk information (lsblk) on Earth shows that the logical volume (lv_SeqEco) is now listed as 700GB. 2. Checking disk information (lsblk) on Sequoia shows that the disk /dev/vde is still listed as 500GB, and partition /dev/vde1 where the mount point /ecosystem is located is also listed as 500GB. 3. I had tried using the resize2fs command to expand the filesystem on /dev/vde1, but it returned with the result that there was nothing to do. Which makes sense now after I checked the disk information, since /dev/vde on Sequoia has not increased from 500GB to 700GB. 4. On previous occasions when I have done this task, I would just start GParted on Sequoia and use the GUI to expand the partition and filesystem. A real quick and simple solution. 5. The problem I have now is that the VGA adapter on my server has died and I have no graphical output to the attached monitor, nor to the iDrac console display. So I am stuck doing this entirely by the command line while logged into the system remotely. 6. I suspect that I need to rescan the devices on Sequoia so that it recognizes the increased space that has been allocated from the extended the logical volume. But when I did that (command below) it came back with a no such file or directory. echo 1 > /sys/class/block/vde1/device/rescan 7. This server is being retired in the next few months, but I need this additional space prior to migrating to the new system. Can someone give me some guidance on what I am missing in this sequence? Let me know if I haven't been clear enough in the explanation of my systems and objective. Thanks. Jeff

4 3

systemd | Requires statement with an instantiated service
by Leon Fauster 01 Sep '21

01 Sep '21

Maybe the work day is already to long. I can not find a solution for following requirement. How to apply a "Requires" with an instantiated service. Example: a@.service b.service a@.service is started as a(a)host1.service and b.service must be started after a(a)host1.service but the unit will be differently parameterized (depended of the region). So I want to generalize the requires statement. My dropin file in ./b.service.d/dep.conf looks like [Unit] Requires="a(a)*.service" This just produces following error: 'Failed to add dependency on "a(a)*.service", ignoring: Invalid argument' I use also a Before=b.service statement for a@.service but that is not enough. Any hints? -- Thanks, Leon

2 1

Unable to update Google products on CentOS 7
by Frank Bures 01 Sep '21

01 Sep '21

Hi, I have Google rpm repository enabled. However, running "yum update" returns https://dl.google.com/linux/chrome/rpm/stable/x86_64/repodata/repomd.xml: [Errno 14] HTTPS Error 404 - Not Found It worked OK just a couple of days ago. Is anyone aware of any recent changes in Google repositories? Thanks Frank -- <listfrank1(a)gmail.com>

2 2

Re: [CentOS] Application migration
by Mark Woolfson 01 Sep '21

01 Sep '21

Hello, I have some data analysis applications running on CentOS 6.4 and 6.6. Due to these CentOS variants not being supported on the Intel Ice Lake server platform I have to migrate them. The minimum CentOS variant which works on the Ice Lake is 7.4. Please can you give me an idea of the migration complexity of moving the applications from 6.4/6.6 to 7.4 or any variant of 7. Mark -- This email has been checked for viruses by AVG. https://www.avg.com

6 5

CentOS-announce Digest, Vol 197, Issue 5
by centos-announce-request＠centos.org 31 Aug '21

31 Aug '21

1 0

Upgrading (?) from legacy boot to UEFI
by Rob Kampen 30 Aug '21

30 Aug '21

After three days of effort I have failed to find a way of shifting a server from legacy boot to UEFI boot. I have made my way through the 400+ pages of RH installation manual for EL7, plus their similarly large system administrators manual. Dozens of pages searched via google and yet none of the layouts for the /boot and /boot/efi have worked in my case. System is a Lenovo 3650 M5 with UEFI bios. Due to RH / CentOS design my initial install onto the two 600GB HDD partitioned these using MBR and legacy boot. I have just obtained two SAS SSD drives of 3.8TB and thus MBR is no longer an option. I have successfully migrated all the system and data from the HDD to the SSD, complete with GPT and RAID1 and all works as expected - except the HDD was still needed to boot the system. That's when the fun / agony started. Each system reboot is almost five minutes just to get to the <F1> for system setup option. Thus testing is a very slow process. I am now at the point where I have a "bios boot" partition (1024K type ef02) as the first partition on each GPT partitioned SSD and have grub2-install onto the drives the bios boot junk needed for legacy boot. Thus I can at least legacy boot from one of the SSD and all comes up as expected. (no idea yet why it only works from one of the SSD and not the other). Unfortunately the server is remote and the CentOS7 USB device I left plugged into the machine refuses to boot from UEFI mode. Thus a rescue mode boot has not been possible. I have two 300MB partitions, one on each SSD suitably formatted (type ef00 and vfat) and set up with the files as follows: -rwx------. 1 root root 134 Aug 1 2020 BOOT.CSV -rwx------. 1 root root 134 Aug 1 2020 BOOTX64.CSV drwx------. 2 root root 4096 Aug 27 16:22 fonts -rwx------. 1 root root 6597 Aug 27 21:33 grub.cfg -rwx------. 1 root root 1024 Aug 26 23:22 grubenv -rwx------. 1 root root 1122120 Mar 17 07:24 grubx64.efi -rwx------. 1 root root 19378672 Aug 26 20:29 initramfs-3.10.0-1160.36.2.el7.x86_64.img -rwx------. 1 root root 1154640 Aug 1 2020 mmx64.efi -rwx------. 1 root root 1154640 Aug 1 2020 MokManager.efi -rwx------. 1 root root 1243864 Aug 1 2020 shim.efi -rwx------. 1 root root 1237824 Aug 1 2020 shimx64-centos.efi -rwx------. 1 root root 1243864 Aug 1 2020 shimx64.efi -rwx------. 1 root root 6777448 Aug 26 20:27 vmlinuz-3.10.0-1160.36.2.el7.x86_64.efi unfortunately grub2-mkconfig sets up the grub.cfg as for legacy boot because the /sys/firmware/efi does not exist, thanks to running from a legacy boot. I tried a few manual edits to the grub.cfg to deal with linux16 -> linuxefi and initrd16 -> initrdefi but to little avail. Can someone point me to what needs to happen for UEFI boot to work successfully. I am unsure what file I need to point the UEFI bios disk manager setup at, I have tried shim.efi and shimx84-centos.efi The message I get is that linux16 and initrd16 cannot find their files. The change to linuxefi and initrdefi also fail but the system reboot happens before I can see what flashes on screen. Is a USB based UEFI booted rescue mode the only way I can fix this? TIA for your pointers / suggestions.

5 8

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss