[Arm-dev] Instructions for installation on an Odroid HC1

[Pablo Sebastián Greco]

El 9/12/18 a las 13:25, Robert Moskowitz escribió:
>
>
> On 12/9/18 10:45 AM, Pablo Sebastián Greco wrote:
>>
>>
>> El 9/12/18 a las 12:30, Robert Moskowitz escribió:
>>> Pablo,
>>>
>>> I see a new 419-1820 and a 419-v26-1810 from yesterday.  I will 
>>> first try the v26 as it is newer...
>> Correct, both images come from the same ks, but generated with 
>> different versions of livecd-tools. Better if you use the v26 
>> version, since it is what we'd like to use in the future.
>
> It failed.  I dd the image to a 16GB uSD and used gparted to grow the 
> rootfs partition.  I used hardkernel's script to add the boot loader 
> as I did with F29 testing, but used the uboot you have on your image.  
> Same 9/18 date, but slightly larger file.  I then appended the boot 
> info with:
>
> sed -i "s|append|& cpuidle.off=1 \
> console=tty1 console=ttySAC2,115200n8 \
> rd.driver.pre=ledtrig-heartbeat,xhci-plat-hcd no_bL_switcher|" \
> /run/media/rgm/__boot/extlinux/extlinux.conf
>
> Put the card in the odroid-hc1 and got:
>
> U-Boot 2018.09 (Nov 27 2018 - 12:48:09 +0000) for ODROID-XU3/XU4/HC1
>
> CPU:   Exynos5422 @ 800 MHz
> Model: Odroid XU3 based on EXYNOS5422
> Board: Odroid XU3 based on EXYNOS5422
> Type:  hc1
> DRAM:  2 GiB
> MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 2
> Loading Environment from MMC... Card did not respond to voltage select!
> *** Warning - No block device, using default environment
>
> In:    serial
> Out:   serial
> Err:   serial
> Net:   No ethernet found.
> Hit any key to stop autoboot:  0
> MMC Device 1 not found
> no mmc device at slot 1
> Card did not respond to voltage select!
> switch to partitions #0, OK
> mmc2 is current device
> Scanning mmc 2:2...
> Found /extlinux/extlinux.conf
> Retrieving file: /extlinux/extlinux.conf
> 727 bytes read in 4 ms (176.8 KiB/s)
> Ignoring unknown command: ui
> Ignoring malformed menu command:  autoboot
> Ignoring malformed menu command:  hidden
> Ignoring unknown command: totaltimeout
> CentOS-Userland-7-armv7hl-generic-Minimal-419-v26-1810 Boot Options.
> 1:    CentOS-Userland-7-armv7hl-generic-Minimal-419-v26-1810 
> (4.19.7-300.el7.a
> rmv7hl)
> Enter choice: 1: CentOS-Userland-7-armv7hl-generic-Minimal-419-v26-1810 (
> 4.19.7-300.el7.armv7hl)
> Retrieving file: /initramfs-4.19.7-300.el7.armv7hl.img
> 47336545 bytes read in 3110 ms (14.5 MiB/s)
> Retrieving file: /vmlinuz-4.19.7-300.el7.armv7hl
> 7127552 bytes read in 475 ms (14.3 MiB/s)
> append: cpuidle.off=1 console=tty1 console=ttySAC2,115200n8 
> rd.driver.pre=ledtri
> g-heartbeat,xhci-plat-hcd no_bL_switcher ro 
> root=UUID=df5b1afd-af92-4a3f-b6d8-00
> 5320ba30b7 rhgb quiet LANG=en_US.UTF-8
> Retrieving file: /dtb-4.19.7-300.el7.armv7hl/exynos5422-odroidhc1.dtb
> 52518 bytes read in 84 ms (610.4 KiB/s)
> Kernel image @ 0x42000000 [ 0x000000 - 0x6cc200 ]
> ## Flattened Device Tree blob at 43000000
>    Booting using the fdt blob at 0x43000000
>    Loading Ramdisk to 4d2db000, end 4ffffc61 ... OK
>    Loading Device Tree to 4d2cb000, end 4d2dad25 ... OK
>
> Starting kernel ...
>
> [  OK  ] Started Show Plymouth Boot Screen.
> [  OK  ] Reached target Paths.
> [  OK  ] Started Forward Password Requests to Plymouth Directory Watch.
> [  OK  ] Reached target Basic System.
>          Mounting Configuration File System...
> [  OK  ] Mounted Configuration File System.
> [  148.500221] dracut-initqueue[482]: Warning: dracut-initqueue 
> timeout - star
> ting timeout scripts
> [  149.116935] dracut-initqueue[482]: Warning: dracut-initqueue 
> timeout - starti
> ng timeout scripts
> [  149.688854] dracut-initqueue[482]: Warning: dracut-initqueue 
> timeout - starti
> ng timeout scripts
> [  150.259929] dracut-initqueue[482]: Warning: dracut-initqueue 
> timeout - starti
> ng timeout scripts
> [  150.831854] dracut-initqueue[482]: Warning: dracut-initqueue 
> timeout - starti
> ng timeout scripts
>
> ....  snip
>
> [  216.440176] dracut-initqueue[4Warning: 
> /dev/disk/by-uuid/df5b1afd-af92-4a3f-b
> 6d8-005320ba30b7 does not exist
>
> Generating "/run/initramfs/rdsosreport.txt"
>
>
> Entering emergency mode. Exit the shell to continue.
> Type "journalctl" to view system logs.
> You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick 
> or /boot
> after mounting them and attach it to a bug report.
>
>
> dracut:/#
>
> Now what?
>
> Robert
>
>
Robert, that sounds like this 
https://lists.centos.org/pipermail/arm-dev/2018-August/003399.html