[Arm-dev] Instructions for installation on an Odroid HC1

[Robert Moskowitz]

On 12/9/18 11:42 AM, Pablo Sebastián Greco wrote:
>
> El 9/12/18 a las 13:25, Robert Moskowitz escribió:
>>
>>
>> On 12/9/18 10:45 AM, Pablo Sebastián Greco wrote:
>>>
>>>
>>> El 9/12/18 a las 12:30, Robert Moskowitz escribió:
>>>> Pablo,
>>>>
>>>> I see a new 419-1820 and a 419-v26-1810 from yesterday.  I will 
>>>> first try the v26 as it is newer...
>>> Correct, both images come from the same ks, but generated with 
>>> different versions of livecd-tools. Better if you use the v26 
>>> version, since it is what we'd like to use in the future.
>>
>> It failed.  I dd the image to a 16GB uSD and used gparted to grow the 
>> rootfs partition.  I used hardkernel's script to add the boot loader 
>> as I did with F29 testing, but used the uboot you have on your 
>> image.  Same 9/18 date, but slightly larger file.  I then appended 
>> the boot info with:
>>
>> sed -i "s|append|& cpuidle.off=1 \
>> console=tty1 console=ttySAC2,115200n8 \
>> rd.driver.pre=ledtrig-heartbeat,xhci-plat-hcd no_bL_switcher|" \
>> /run/media/rgm/__boot/extlinux/extlinux.conf
>>
>> Put the card in the odroid-hc1 and got:
>>
>> U-Boot 2018.09 (Nov 27 2018 - 12:48:09 +0000) for ODROID-XU3/XU4/HC1
>>
>> CPU:   Exynos5422 @ 800 MHz
>> Model: Odroid XU3 based on EXYNOS5422
>> Board: Odroid XU3 based on EXYNOS5422
>> Type:  hc1
>> DRAM:  2 GiB
>> MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 2
>> Loading Environment from MMC... Card did not respond to voltage select!
>> *** Warning - No block device, using default environment
>>
>> In:    serial
>> Out:   serial
>> Err:   serial
>> Net:   No ethernet found.
>> Hit any key to stop autoboot:  0
>> MMC Device 1 not found
>> no mmc device at slot 1
>> Card did not respond to voltage select!
>> switch to partitions #0, OK
>> mmc2 is current device
>> Scanning mmc 2:2...
>> Found /extlinux/extlinux.conf
>> Retrieving file: /extlinux/extlinux.conf
>> 727 bytes read in 4 ms (176.8 KiB/s)
>> Ignoring unknown command: ui
>> Ignoring malformed menu command:  autoboot
>> Ignoring malformed menu command:  hidden
>> Ignoring unknown command: totaltimeout
>> CentOS-Userland-7-armv7hl-generic-Minimal-419-v26-1810 Boot Options.
>> 1:    CentOS-Userland-7-armv7hl-generic-Minimal-419-v26-1810 
>> (4.19.7-300.el7.a
>> rmv7hl)
>> Enter choice: 1: 
>> CentOS-Userland-7-armv7hl-generic-Minimal-419-v26-1810 (
>> 4.19.7-300.el7.armv7hl)
>> Retrieving file: /initramfs-4.19.7-300.el7.armv7hl.img
>> 47336545 bytes read in 3110 ms (14.5 MiB/s)
>> Retrieving file: /vmlinuz-4.19.7-300.el7.armv7hl
>> 7127552 bytes read in 475 ms (14.3 MiB/s)
>> append: cpuidle.off=1 console=tty1 console=ttySAC2,115200n8 
>> rd.driver.pre=ledtri
>> g-heartbeat,xhci-plat-hcd no_bL_switcher ro 
>> root=UUID=df5b1afd-af92-4a3f-b6d8-00
>> 5320ba30b7 rhgb quiet LANG=en_US.UTF-8
>> Retrieving file: /dtb-4.19.7-300.el7.armv7hl/exynos5422-odroidhc1.dtb
>> 52518 bytes read in 84 ms (610.4 KiB/s)
>> Kernel image @ 0x42000000 [ 0x000000 - 0x6cc200 ]
>> ## Flattened Device Tree blob at 43000000
>>    Booting using the fdt blob at 0x43000000
>>    Loading Ramdisk to 4d2db000, end 4ffffc61 ... OK
>>    Loading Device Tree to 4d2cb000, end 4d2dad25 ... OK
>>
>> Starting kernel ...
>>
>> [  OK  ] Started Show Plymouth Boot Screen.
>> [  OK  ] Reached target Paths.
>> [  OK  ] Started Forward Password Requests to Plymouth Directory Watch.
>> [  OK  ] Reached target Basic System.
>>          Mounting Configuration File System...
>> [  OK  ] Mounted Configuration File System.
>> [  148.500221] dracut-initqueue[482]: Warning: dracut-initqueue 
>> timeout - star
>> ting timeout scripts
>> [  149.116935] dracut-initqueue[482]: Warning: dracut-initqueue 
>> timeout - starti
>> ng timeout scripts
>> [  149.688854] dracut-initqueue[482]: Warning: dracut-initqueue 
>> timeout - starti
>> ng timeout scripts
>> [  150.259929] dracut-initqueue[482]: Warning: dracut-initqueue 
>> timeout - starti
>> ng timeout scripts
>> [  150.831854] dracut-initqueue[482]: Warning: dracut-initqueue 
>> timeout - starti
>> ng timeout scripts
>>
>> ....  snip
>>
>> [  216.440176] dracut-initqueue[4Warning: 
>> /dev/disk/by-uuid/df5b1afd-af92-4a3f-b
>> 6d8-005320ba30b7 does not exist
>>
>> Generating "/run/initramfs/rdsosreport.txt"
>>
>>
>> Entering emergency mode. Exit the shell to continue.
>> Type "journalctl" to view system logs.
>> You might want to save "/run/initramfs/rdsosreport.txt" to a USB 
>> stick or /boot
>> after mounting them and attach it to a bug report.
>>
>>
>> dracut:/#
>>
>> Now what?
>>
>> Robert
>>
>>
> Robert, that sounds like this 
> https://lists.centos.org/pipermail/arm-dev/2018-August/003399.html

FWIW, F29 is booting up fine.

What do suggest I add based on the email you reference?

thanks