Arm-dev August 2014

arm-dev@lists.centos.org

10 participants
5 discussions

Help on SElinux
by Robert Moskowitz 13 Aug '14

13 Aug '14

I come over here from the RedSleeve-Users list. RedSleeve's minimal EL6 distribution has SELinux disabled, in part because of no support in the armv5 kernels. But I am using an armv7 (Cubieboard2) with the F19 kernel which DOES have SELinux working (I tried it to be sure). But I cannot get SELinux working on my RedSleeve build, so I was hoping there might be some expertise here to find out what is missing. I have posted my RSEL build guide for the Cubieboard on the Redsleeve list; I expect that at some point I will be getting it on the wiki. But I can supply a compressed SDcard image that will just boot up on a 8Gb SDcard (minimum size of 7960Mb). But when I take that image, install: system-config-securitylevel selinux-policy policycoreutils-python rebooted, and no SElinux running. # sestatus SELinux status: disabled And no semanage commands work. But the config file shows it should be enforcing. So can I get some help on this here? Or do I have to work around no SELinux support until the group here gets Centos 7 ported to arm. thanks

1 0

Xen on Cubieboards
by Robert Moskowitz 12 Aug '14

12 Aug '14

Dr. Jon Crowcroft over at Cambridge (an old IETF friend), just told me that they have a XEN port to the Cubieboard. If that is of interest to anyone here, I plan on getting more information. I have never entered into the world of virtualization (other than VM on old IBM iron), but might give it a try. Particularly if Jon gets one of his students to help me along...

3 8

what boards do we all have ?
by Karanbir Singh 12 Aug '14

12 Aug '14

Hi guys, as a show of hands, can we get a list of : 1) boards we have at the moment 2) Boards we would like to have in say the next 6 to 8 months 3) boards that dont make either of those two lists, but what folks think might be worth targetting anyway I'll reply to this with my own list shortly Regards -- Karanbir Singh +44-207-0999389 | http://www.karan.org/ | twitter.com/kbsingh GnuPG Key : http://www.karan.org/publickey.asc

8 15

Re: [Arm-dev] what boards do we all have ?
by Oliver Frommel 11 Aug '14

11 Aug '14

>> >> as a show of hands, can we get a list of : >> 1) boards we have at the moment > > I have a Cubietruck >> 2) Boards we would like to have in say the next 6 to 8 months > and hope to get an AMD Opteron A1100 in the future :) best Oliver

3 3

Re: [Arm-dev] what boards do we all have ?
by Gordan Bobic 08 Aug '14

08 Aug '14

There are many ARM machines including the hugely popular Sheva/Guru/Dream Plugs and R-Pi that are < ARMv7. They all meet the spec you list but won't work if the distro is targeting armv7hl. My lost of ARMv5 hardware is: ShevaPlug GuruPlug DreamPlug QNAP TS-421 (NAS) All of the above are Marvell Kirkwood based. ARMv6: VIA APC ARMv7: Toshiba AC100 (Tegra 2) Compulab TrimSlice (Tegra 2) Samsung Chromebook 1 (Exynos) Cornfed Conserved (iMX6) Solidrun Cubox-i (iMX6?) Arndale OCTA (Samsung?) My next planned acquisition as far as ARM machines are concerned is Chromebook 2. Karanbir Singh <kbsingh(a)centos.org> wrote: On 08/08/2014 01:33 AM, Gordan Bobic wrote: > On 08/08/2014 01:27 AM, Karanbir Singh wrote: >> Hi guys, >> >> as a show of hands, can we get a list of : >> 1) boards we have at the moment > > I'm going to hazard a guess there isn't any point in even mentioning > anything that isn't at least ARMv7? well, if people want to come along and do the work for other platforms, I dont see why we should block that. But realistically, I've been working on the assumption that 512MB of ram and 400Mhz+ is perhaps the lowest end we should try and target resource wise. > >> 2) Boards we would like to have in say the next 6 to 8 months >> >> 3) boards that dont make either of those two lists, but what folks >> think >> might be worth targetting anyway > > Am I right in assuming the main purpose of this question is for > determining which kernel builds are worth trying to provide? At the moment, I am trying to workout what sort of resources we might want to pool in for the builder, testing side. -- Karanbir Singh, Project Lead, The CentOS Project +44-207-0999389 | http://www.centos.org/ | twitter.com/CentOS GnuPG Key : http://www.karan.org/publickey.asc _______________________________________________ Arm-dev mailing list Arm-dev(a)centos.org http://lists.centos.org/mailman/listinfo/arm-dev

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Arm-dev August 2014