Arm-dev March 2016

arm-dev@lists.centos.org

28 participants
30 discussions

Start a nNew thread

Patch to fix build of libqb
by Henrik Andersson 08 Mar '16

08 Mar '16

Hi, Attached is a patch which fix building of libqb Regards, Henrik Andersson

1 0

Epel pkgs for armhfp
by Fabian Arrotin 07 Mar '16

07 Mar '16

It's a question we receive a lot (not only this list, but also on irc, or even mails and direct discussions) but the actual status isn't really clear. It seems that something is slowly going on but hardware availability and other things have to be solved first at the epel side. (see for example this blog post about other arches in epel, and centos : http://smoogespace.blogspot.be/2016/02/epel-proposal-4-build-it-all-in-cent…) So, as some of us still need those packages, I've just created an epel-pass-1 plague target, and I just started to rebuild some of the packages. The primary goal is at least to show that it can be done, and also to help actual users who need those packages. (and all of us rebuilding the same SRPM[s] on our side is a waste of time) I haven't submitted the whole EPEL source pkgs list to the builders, but just some pkgs that I thought most people would be interested in . Pkgs (unsigned/untested) will appear here : http://armv7.dev.centos.org/repodir/epel-pass-1/ While build/root logs will appear (as usual) here : http://armv7.dev.centos.org/rpmbuild/epel-pass-1/ Willing to test ? Give feedback ? submit a list of pkgs you want to see built ? Feel free to comment -- Fabian Arrotin The CentOS Project | http://www.centos.org gpg key: 56BEC54E | twitter: @arrfab

2 2

Raspberry Pi3 CentOS image : call for testers !
by Fabian Arrotin 07 Mar '16

07 Mar '16

I think everything is in the title, so : http://dev.centos.org/centos/7/isos/armhfp/CentOS-Userland-7-armv7hl-Minima… Feedback wanted please PS : I ordered one myself, but still not delivered so untested on my side, but KB said that he tested it and that it booted fine (and fast !) :-) -- Fabian Arrotin The CentOS Project | http://www.centos.org gpg key: 56BEC54E | twitter: @arrfab

5 7

Lenovator Cello arm64/aarch64 server development board announced
by Jim Perrin 07 Mar '16

07 Mar '16

Lenovator is now taking pre-orders for a server development platform. This board should "just work" out of the box with CentOS. If you're interested in 64bit arm, you might consider pre-ordering this board. http://www.lenovator.com/product/103.html -- Jim Perrin The CentOS Project | http://www.centos.org twitter: @BitIntegrity | GPG Key: FA09AD77

2 1

Additional X-Gene patches
by Phong Vo 07 Mar '16

07 Mar '16

Hi Jim, Please help incorporate the attached patches in the next build. Please note that patches 0008 and 0009 are more applicable to X-Gene 2 which you should be able to verify on Merlin boards. Thanks, -Phong

4 11

fix check-files for mesa-10.6.5-3.20150824.el7.arm build
by Henrik Andersson 05 Mar '16

05 Mar '16

Add msm_dri.so to files section of dri-drivers subpackage. diff --git a/SPECS/mesa.spec b/SPECS/mesa.spec index 7ad8c48..c1ec675 100644 --- a/SPECS/mesa.spec +++ b/SPECS/mesa.spec @@ -480,6 +480,7 @@ rm -rf $RPM_BUILD_ROOT %endif %if 0%{?with_freedreno} %{_libdir}/dri/kgsl_dri.so +%{_libdir}/dri/msm_dri.so %endif %{_libdir}/dri/nouveau_dri.so %if 0%{?with_vmware}

2 1

Light desktop
by Enrique Villalobos 03 Mar '16

03 Mar '16

Hello, My name is Enrique and I'm from Madrid (Spain). My question is: has anyone setup CentOS on a RPi 2 with a light desktop (LDXE, Mate, ...)? Any advice? :) I have experience with CentOS buy I've always worked with servers. Command line only. Thank you.

2 1

Issue with CentOS Networking on RPi-2
by Prakash R Kanthi 03 Mar '16

03 Mar '16

Hi There, I have a 8GB SD card that has centos latest arm release on it. OS fails to get a DHCP IP. ifconfig shows that eth exists and dropping packets and no IP. Contents of /etc/sysconfig/network-scripts/ifcfg-eth0 are as following: TYPE=Ethernet BOOTPROTO=dhcp NM_CONTROLLED=yes DEFROUTE=yes NAME=eth0 ONBOOT=yes Ifdown and ifup are not working either. [root@rpi2 ~]#ifdown eth0 ERROR : [ipv6_test_device_status] Missing parameter 'device' (arg 1) /etc/sysconfig/network-scripts/ifdown-post: line 52: 1183 Segmentation fault /usr/bin/firewall-cmd -remove-interface="${DEVICE}" > /dev/null 2>&1 [root@rpi2 ~]#ifup eth0 Error: Connection activation failed. System boots up fine with following errors: Error Starting Security Auditing Service Failed to start Root Filesystem Auto-Resizer I see following in /var/log/messages: Sshd.service failed Polkit.service failed Any help is appreciated. Thanks, Prakash

3 4

Rasberry Pi 3
by johan.vermeulen7＠telenet.be 02 Mar '16

02 Mar '16

Hello All, just got this. For those who haven't heard already http://www.cyberciti.biz/hardware/raspberry-pi-3-model-b-specs-pricing

3 3

Patch to enable DesignWare Core I2C driver
by Phong Vo 01 Mar '16

01 Mar '16

Hi Jim, Please accept the attached patch to enable Designware Core I2C driver in CentOS 7.2. Thanks, -Phong

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Arm-dev March 2016