For many reasons, I have been off this list for a couple months. My Cubies have been idle (except the few production ones). My like is beginning to get back in order and I would like to be able to block out a few hours a week working on Centos armv7 on either a cubie2 or cubietruck.
I have seen a couple of notes about armv7-bananaPi support, but can someone either point me to builds I can use and instructions to get the system up and running, or tell me to go back to other projects for a couple weeks.
thank you
I would like to be able to block out a few hours a week working on Centos armv7 on either a cubie2 or cubietruck.
Johnny Hughes has built and released an image for the cubietruck build using RootFS Build Factory. You can read the blog post here http://seven.centos.org/2015/06/centos-7-1503-armv7hl-proof-of-concept-pre-a... This image does not have the root password set, so you will need a HDMI cable or a serial console cable.
You can generate an image yourself for your cubietruck with the root password set using the latest RootFS Build Factory https://github.com/mndar/rbf
David Tischler has tested the image built for Cubieboard 2. So you can give that a shot too.
For RBF, the README on github has everything to get you started. There are additional docs in the doc directory if you wish to add support for more boards.
Regards Mandar Joshi
On 08/17/2015 06:01 AM, Mandar Joshi wrote:
I would like to be able to block out a few hours a week working on Centos armv7 on either a cubie2 or cubietruck.
Johnny Hughes has built and released an image for the cubietruck build using RootFS Build Factory. You can read the blog post here http://seven.centos.org/2015/06/centos-7-1503-armv7hl-proof-of-concept-pre-a... This image does not have the root password set, so you will need a HDMI cable or a serial console cable.
All my Cubies have the serial console cable to USB. I feel that is as much a 'standard' config as VGA/Kybd was on Intel boards. And it only adds $1.75 per unit.
You can generate an image yourself for your cubietruck with the root password set using the latest RootFS Build Factory https://github.com/mndar/rbf
David Tischler has tested the image built for Cubieboard 2. So you can give that a shot too.
For RBF, the README on github has everything to get you started. There are additional docs in the doc directory if you wish to add support for more boards.
Thanks I will allocate a bit of time for this. Probably more tomorrow than today, it seems.
I got the Cubietruck image from:
http://people.centos.org/hughesjr/armv7hl/cubietruck/images/cubietruck-cento...
I had to decompress it first before dd it to my sd card (at least I do not know an option for dd to process a .gz image).
So my first comment:
Can images be done with xzcat as Fedoraproject is using then it is a 'simple'
xzcat image.xz > /dev/sdb ; sync
Image booted fine, and via serial console, I set the root password. I then created changed host name and created the user acct:
hostnamectl set-hostname fqdn adduser -c "First Last" -G wheel user passwd user
Then I went to move sshd to a port other than 22 and found that semanage not in the build :(
Next I checked the system time and saw it was 0. Need sntp or such to set the date/time as these boards tend NOT to have clock batteries.
MAC address seems to be consistant across boots, but then as I recall F19 worked this way, it was F21 where it broke and was fixed in F22 uboot. This is important if you want to craft your MAC address to control the IPv6 address created wth RA prefixes. Particularly useful if you change a system and don't want to have to change your IPv6 address...
No WiFi, but none in F19. I am months behind on Rawhide testing to see what Hans has working these days.
No /var/log/messages; have to figure out how to turn this on, particularly once I get this image to a sata HD that Cubie supports. Along with logrotate.
No Apache to test out web access. In fact no yum repos, but I think that is what the earlier messages said, and perhaps no progress in this direction.
https://github.com/mndar/rbf talks about based on F21. I would like to see that image, as well as the Cubie2 image mentioned. I do not have any worthwhile experience with github to quickly navigate around (
So other than saying I got C7 up on my Cubietruck, I will need to find a lot more before I can take the next step.
but thanks for what is available so far.
On 08/17/2015 08:04 AM, Robert Moskowitz wrote:
On 08/17/2015 06:01 AM, Mandar Joshi wrote:
I would like to be able to block out a few hours a week working on Centos armv7 on either a cubie2 or cubietruck.
Johnny Hughes has built and released an image for the cubietruck build using RootFS Build Factory. You can read the blog post here http://seven.centos.org/2015/06/centos-7-1503-armv7hl-proof-of-concept-pre-a...
This image does not have the root password set, so you will need a HDMI cable or a serial console cable.
All my Cubies have the serial console cable to USB. I feel that is as much a 'standard' config as VGA/Kybd was on Intel boards. And it only adds $1.75 per unit.
You can generate an image yourself for your cubietruck with the root password set using the latest RootFS Build Factory https://github.com/mndar/rbf
David Tischler has tested the image built for Cubieboard 2. So you can give that a shot too.
For RBF, the README on github has everything to get you started. There are additional docs in the doc directory if you wish to add support for more boards.
Thanks I will allocate a bit of time for this. Probably more tomorrow than today, it seems.
-
Mandar Joshi -
Robert Moskowitz