Discuss November 2005

discuss@lists.centos.org

232 participants
368 discussions

RE: [CentOS] Frontpage Extensions
by Bob Pierce 24 Nov '05

24 Nov '05

William, The package from nuonce.net sounds interesting. But if that doesn't work for you, the extensions from Ready To Run do work on Centos4.2. We just finished putting together a hosting server with FP extensions on Centos4.2. Although there are a few initial headaches with configuring everything properly most of the tips we needed came from the ready2run site. If you run into specific problems feel free to ask. Our server's been working good for a few months now. We just have to be careful about the permissions on /var/log/httpd/fpcgisock after yum updates. Bob. -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Doug Ferrell Sent: Thursday, November 24, 2005 7:36 AM To: CentOS mailing list Subject: RE: [CentOS] Frontpage Extensions -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org]On Behalf Of Paul Sent: Thursday, November 24, 2005 12:43 AM To: CentOS mailing list Subject: Re: [CentOS] Frontpage Extensions On Tue, 2005-11-22 at 20:35 -0500, William Warren wrote: > Where can ig et frontpage extensions to install on my centos_4 server? > REady to run's don't mention RHEL anywhere. > Microsoft has discontinued them on their server products. The last system I installed them on was a RH 7.3 system for a local ISP that had a drive meltdown. I don't even know if they work with Apache 2.0. Paul You can try here: http://www.nuonce.net/bq-frontpage.php ...DOUG _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

Where is the proper place to set the group ownership of devices under /dev/ in Centos3.
by Alexander Georgiev 24 Nov '05

24 Nov '05

Dear list members, I have a DVD writer /dev/scd0 which after reboot has the following ACL: brw-rw---- 1 root disk 11, 0 Sep 9 2004 /dev/scd0 However I want to set this device group to "Domain Users" in order to enable its members to burn DVDs. If i invoke: #chgroup "Domain Users" /dev/scd0 the next reboot will override the group back to "disk". Is there a standard/reglamented way to set the group ownership of a device file. Best regards! ageorgiev

2 2

Frontpage Extensions
by William Warren 24 Nov '05

24 Nov '05

Where can ig et frontpage extensions to install on my centos_4 server? REady to run's don't mention RHEL anywhere. -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician) Linux user #322099 Machines: 206822 256638 276825 http://counter.li.org/

4 3

Apache with mod_perl rpm query..
by Sanjay Arora 24 Nov '05

24 Nov '05

Any repository maintaining Apache rpm with mod_perl for CentOS? How do I maintain rpm installs from repos and also maintain ability to use various mods that I would like to use? Or do I have to ./configure ;-) With regards. Sanjay.

3 3

CentOS-announce Digest, Vol 9, Issue 14
by centos-announce-request＠centos.org 24 Nov '05

24 Nov '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CentOS 4.2 Server CD - x86_64 Released (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Thu, 24 Nov 2005 11:03:03 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CentOS 4.2 Server CD - x86_64 Released To: centos-announce(a)centos.org Message-ID: <43859DE7.9030001(a)centos.org> Content-Type: text/plain; charset="us-ascii" The single CD Server edition of CentOS 4.2/x86_64 has now been released. It lets you setup a basic CentOS 4 system along with the server components. Anything else that is needed can then be installed via yum or up2date once the system is running. The resulting installed system is identical to a normal CentOS 4 install ( with yum and up2date ). Download the ServerCD from /centos/4/isos/x86_64/ directory on your local mirror or pickup the torrent. List of mirrors at http://www.centos.org/mirrors . The torrent is at http://mirror.centos.org/centos/4/isos/x86_64/CentOS-4.2.ServerCD-x86_64.to… We appreciate all feedback ( via http://bugs.centos.org/ ), including RFE's and bug notifications. Enjoy!

1 0

Warnings for package kernel-2.6.9-22.0.1.106.unsupported
by Collins Richey 24 Nov '05

24 Nov '05

FYI, During my bi-weekly yum update, I noted the following warnings. Warnings during kernel update kernel-2.6.9-22.0.1.106.unsupported WARNING: /lib/modules/2.6.9-22.0.1.106.unsupported/kernel/fs/afs/kafs.ko needs unknown symbol afs_key_unregister WARNING: /lib/modules/2.6.9-22.0.1.106.unsupported/kernel/fs/afs/kafs.ko needs unknown symbol afs_key_register Is this anything to worry about? If I read this right, the error is for AFS, and I could care less whether AFS works or not. -- Collins Richey Debugging is twice as hard as writing the code ... If you write the code as cleverly as possible, you are, by definition, not smart enough to debug it. -Brian Kernighan

2 1

FUSE/SSHFS RPM Packages.
by Camron W. Fox 24 Nov '05

24 Nov '05

Alle, Does anyone know if there are any reputable repositories out there that contain packages for fuse/sshfs? Best Regards, Camron -- Camron W. Fox Hilo Office High Performance Computing Group Fujitsu America, INC. E-mail: cwfox(a)us.fujitsu.com

3 2

[Hardware] Good Server I/O on-the-cheap: ASL Monarch 811x with CentOS 4.2 ...
by Bryan J. Smith 24 Nov '05

24 Nov '05

Since good server designs have come up in the past, I wanted to point out a "low-cost" server option that has good I/O, and the vendor offers _your_choice_ of not only Fedora Core or Red Hat Enterprise Linux, but _also_ CentOS _shipped_ with it! IN-A-NUTSHELL ... Starting at just over $750, you can get a single Socket-939 Opteron 1xx (dual-core is an option) system with up to 4GiB of ECC (but non- registered) DDR SDRAM, up to 4 hot-swap SATA bays (8114 model), one PCI- X slot (perfect for a 3Ware card, which they _do_ support ;-) and dual on-board GbE Broadcom NICs -- all in a 1U rackmount form-factor. The resulting I/O performance is excellent at the price-point for those that want a good server I/O well beyond typical "desktop/workstation" but for around the same price. The 4 hot-swap drive configuration, with a decent amount of RAM, 3Ware card with the 4 drives in RAID-10 or 5, and, most importantly, with CentOS 4.2 shipped runs just a little over $2K. Not really much more than an equivalent "self-assembled desktop" you might be able to put together, while being a heck of a lot better in interconnect configuration and resulting server performance. ASL Monarch 8110/8114/8115 (Left Column): http://www.aslab.com/products/storage/monarch.html NOW THE TECHNOBABLE I'M INFAMOUS FOR ... ASL Monarch Series, 811x with ServerWorks HT1000 Chipset I haven't purchased anything from ASL in years, but back when I was working in the semiconductor industry, the sysadmin at Transmeta turned me on to them. The really know their hardware and Linux compatibility, and they have been shipping products with 3Ware for years. They are now shipping their Monarch 811x series of products (not to be confused with a _separate_ vendor called Monarch Computer Systems ;-) with the Broadcom ServerWorks HT1000 chipset: http://www.broadcom.com/products/Enterprise-Small-Office/SystemI-O-Chips/HT… The ServerWorks HT1000 is rarely found without the HT2000, hence why you typically only find them in dual or quad socket boxen. And that combination competes against serverboards with the AMD8131/8132, which are also typically only found in dual or quad socket boxen. The number of channels, traces, etc... is why it's never cost-effective to make a single processor with an AMD8131. But in the case of the single chip HT1000 on its own -- with dual-GbE NICs and a single PCI-X channel, plusall legacy PC peripherals logic necessary, it _was_ designed to be standalone. So if I had to guess from the specs, the mainboard is the SuperMicro H8SSL-i (although I have not confirmed it): http://www.supermicro.com/Aplus/motherboard/Opteron/HT1000/H8SSL-i.cfm The H8SSL-i is _not_ available via retail channels, only select OEMs. So you can't just go out and buy it. Unless you just want a 2 SATA drive version (the 8110 or 14" shallow 8115), the 8114 offers up to 4 SATA hot-swap bays in a sub-20" deep 1U rackmount: http://www.aslab.com/products/storage/monarch8114.html They seem to be supporting the latest 3Ware Escalade 9550SX, which it too new to trust IMHO. But if they feel differently, I'd trust them. At the same time, it wouldn't surprise me if they'd sell it with a Escalade 8506 series instead -- which I do trust (especially since with only 4 drives, I'd probably create a RAID-10 volume), and only default to the 9550SX because most customers want RAID-5. -- Bryan J. Smith b.j.smith(a)ieee.org http://thebs413.blogspot.com ------------------------------------------------------------------- For everything else *COUGH*commercials*COUGH* there's "ManningCard"

3 9

dual head on laptop
by Jerry Geis 24 Nov '05

24 Nov '05

I am trying to use the system-config-display utility to setup a laptop for dual-heal. I want my LCD to be 1024x768 and external VGA to be 1366x768. I presume the LCD will go virtual or something to match the 1366x768 which is fine. When I am setting up the dual head and click OK nothing happens??? On the console I have something about secondVideoCardOptionMenu.get_menu().get_active().get_data("NAME") attribute error. There is no second video card in a laptop???? How do setup the VGA port to be different than the LCD? Thanks, jerry

5 11

Desktop media apps query
by Sanjay Arora 24 Nov '05

24 Nov '05

Want to support the following apps on some of our centos 4.2 desktops. Are yum-installable binaries/rpms available for CentOS 4.2 and which repository? MP3 player Macromedia Flash/Shockwave MPlayer Media Player RealPlayer 10 Media Player Java J2RE and Mozilla Plug-in MS TrueType fonts With regards. Sanjay.

6 6

← Newer
1
...
6
7
8
9
10
11
12
...
37
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss November 2005