Discuss August 2011

discuss@lists.centos.org

222 participants
209 discussions

Re: [CentOS] hardware isues
by William Warren 14 Aug '11

14 Aug '11

On 8/14/2011 6:39 AM, lists-centos wrote: > did you add the broadcom card, or did it come installed? i'm > wondering if there's some type of conflict between it and the > onboard NICs. > > > ------------ Original Message ------------ >> Date: Saturday, August 13, 2011 11:29:25 PM -0400 >> From: William Warren >> To: lists-centos >> Subject: Re: [CentOS] hardware isues >> >> Well i have also tried the minimal version and the same thing. it >> seems there's something not going well with the t110(and maybe >> higher units) and centos? >> >> On 8/13/2011 9:40 PM, lists-centos wrote: >>> ------------ Original Message ------------ >>>> Date: Saturday, August 13, 2011 09:06:51 PM -0400 >>>> From: William Warren<hescominsoon(a)emmanuelcomputerconsulting.com> >>>> >>>> I have a broadcom bcm5722 and a dual intel pro/1000 pt nic in a >>>> dell t110. The setup sees the cards and i put them into >>>> automatic mode. After the install no cards are detected at all. >>>> Astaro 8.01 detects and utilizes all of these cards just fine. >>>> I have also tried ubuntu server 10.04 lts and they work fine. >>>> I'm curious if this is a bug with Centos 6? >>> I have a new T310 with what I suspect has the same intel dual NIC >>> - the machine is off at the moment and the order detail just says: >>> >>> On-Board Dual Gigabit Network Adapter [430-2008] >>> >>> that I installed centos 6.0 on last week. I only configured first >>> port and it worked fine. The install set up a stub ifcfg-eth1 >>> which looked fine too, but I haven't configured it yet to confirm >>> that it works as expected. >>> >>> >>> - Richard >>> >>> > ------------ End Original Message ------------ > > The broadcom is embedded the intel dual port is the addon. Only centos 6 has this issue i am currently running kvm under ubuntu 10.04 right now. I also did a test install of esxi and astaro and they worked perfectly there. It is something weird with centos.

1 0

Re: [CentOS] instlaling onto mdadm centos 6
by Devin Reade 14 Aug '11

14 Aug '11

--On Saturday, August 13, 2011 08:59:30 AM -0400 William Warren <hescominsoon(a)emmanuelcomputerconsulting.com> wrote: > On 8/13/2011 7:40 AM, B.J. McClure wrote: >> >> boot partition must be raid 1. Grub does not work with 5, 10. etc. > > found out grub will not boot directly off the /boot md device..but i can > make grub put itself on the mbr's of both disks..:) Both steps are necessary for a properly redundant configuration. Depending on the age/interface/BIOS of your machine, if you lose your primary/master hard disk you may have to switch cabling to make your other disk (containing the mirror of /boot) the primary/master. Many modern BIOSes will allow you to select the boot priority order between disks without moving cables. This is something that is best determined empirically before you put your machine into production ... Typically, I do the following: 1. Put /boot onto a mirrored md device based on 200MB partitions. 2. Put the remaining disk space into a second partition using whatever RAID level is appropriate (including 5 or 6) 3. Give the large raid device to LVM 4. Add LVM-based filesystems as necessary. 5. After the system is fully installed, ensure that all boot drives have a copy of the proper MBR. 6. Test by powering down, removing the original boot drive, and powering up again (after ensuring that all RAID sync operations have been completed). This has worked fine for quite a while (CentOS 5.x) and I can verify that RAID1 (/boot) + RAID6 (remainder) work just fine with CentOS 6, including putting an encryption layer between the RAID6 device and LVM. Devin

1 0

hardware isues
by William Warren 14 Aug '11

14 Aug '11

I have a broadcom bcm5722 and a dual intel pro/1000 pt nic in a dell t110. The setup sees the cards and i put them into automatic mode. After the install no cards are detected at all. Astaro 8.01 detects and utilizes all of these cards just fine. I have also tried ubuntu server 10.04 lts and they work fine. I'm curious if this is a bug with Centos 6?

1 0

can't list directories in ftp
by Tim Dunphy 13 Aug '11

13 Aug '11

Hey list, Sorry for all the questions today. But I am trying to wrap up this ftp business and still having some issues. I appreciate your input. SELinux is temporarily disabled (until I can work this all out) and I am now able to log into the FTP server. [root@LCENT05:~] #/usr/bin/ftp localhost Connected to localhost (127.0.0.1). 220 FTP Server ready. Name (localhost:root): bluethundr 331 Password required for bluethundr Password: 230 User bluethundr logged in Remote system type is UNIX. Using binary mode to transfer files. ftp> ls 227 Entering Passive Mode (xx,xx,xx,xxx,255,44). ftp: connect: Invalid argument ftp> I still have DebugLevel set to 10 in the config and this is what I see in the proftpd logs: Aug 13 12:00:39 LCENT05 proftpd[2922] 192.168.1.48 (127.0.0.1[127.0.0.1]): USER bluethundr: Login successful. Aug 13 12:00:39 LCENT05 proftpd[2922] 192.168.1.48 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'SYST' to mod_tls Aug 13 12:00:39 LCENT05 proftpd[2922] 192.168.1.48 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'SYST' to mod_core Aug 13 12:00:39 LCENT05 proftpd[2922] 192.168.1.48 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'SYST' to mod_core Aug 13 12:00:39 LCENT05 proftpd[2922] 192.168.1.48 (127.0.0.1[127.0.0.1]): dispatching CMD command 'SYST' to mod_core Aug 13 12:00:39 LCENT05 proftpd[2922] 192.168.1.48 (127.0.0.1[127.0.0.1]): dispatching LOG_CMD command 'SYST' to mod_log Aug 13 12:00:45 LCENT05 proftpd[2922] 192.168.1.48 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'PASV' to mod_tls Aug 13 12:00:45 LCENT05 proftpd[2922] 192.168.1.48 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'PASV' to mod_core Aug 13 12:00:45 LCENT05 proftpd[2922] 192.168.1.48 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'PASV' to mod_core Aug 13 12:00:45 LCENT05 proftpd[2922] 192.168.1.48 (127.0.0.1[127.0.0.1]): dispatching CMD command 'PASV' to mod_core Aug 13 12:00:45 LCENT05 proftpd[2922] 192.168.1.48 (127.0.0.1[127.0.0.1]): in dir_check_full(): path = '/', fullpath = '/'. Aug 13 12:00:45 LCENT05 proftpd[2922] 192.168.1.48 (127.0.0.1[127.0.0.1]): Entering Passive Mode (71,187,203,194,255,44). Aug 13 12:00:45 LCENT05 proftpd[2922] 192.168.1.48 (127.0.0.1[127.0.0.1]): dispatching LOG_CMD command 'PASV' to mod_log Aug 13 12:05:08 LCENT05 proftpd[2863] 192.168.1.48 (71.187.203.194[71.187.203.194]): Client session idle timeout, disconnected Aug 13 12:05:08 LCENT05 proftpd[2863] 192.168.1.48 (71.187.203.194[71.187.203.194]): ROOT PRIVS at mod_auth_pam.c:173 Aug 13 12:05:08 LCENT05 proftpd[2863] 192.168.1.48 (71.187.203.194[71.187.203.194]): ROOT PRIVS: ID switching disabled Aug 13 12:05:08 LCENT05 proftpd[2863] 192.168.1.48 (71.187.203.194[71.187.203.194]): RELINQUISH PRIVS at mod_auth_pam.c:207 Aug 13 12:05:08 LCENT05 proftpd[2863] 192.168.1.48 (71.187.203.194[71.187.203.194]): RELINQUISH PRIVS: ID switching disabled Aug 13 12:05:08 LCENT05 proftpd[2863] 192.168.1.48 (71.187.203.194[71.187.203.194]): FTP session closed. This is what my proftpd config is looking like at the moment. I have the default root set to this directory: DefaultRoot /var/www/html/jokefire.com And I give access to this directory with this directive: <Directory /var/www/html/jokefire.com> <Limit ALL> AllowAll </Limit> </Directory> I plan to tighten up the security a little bit as I make some more progress. But my immediate goal is just to get this to work. :) Here is the entire config.. just in case it might help! Thanks once again! Tim # This is the ProFTPD configuration file # # See: http://www.proftpd.org/docs/directives/linked/by-name.html # Server Config - config used for anything outside a <VirtualHost> or <Global> context # See: http://www.proftpd.org/docs/howto/Vhost.html ServerName "ProFTPD server" ServerIdent on "FTP Server ready." ServerAdmin root@localhost DefaultServer on # Cause every FTP user except adm to be chrooted into their home directory # Aliasing /etc/security/pam_env.conf into the chroot allows pam_env to # work at session-end time (http://bugzilla.redhat.com/477120) VRootEngine on DefaultRoot /var/www/html/jokefire.com #DefaultRoot ~ !adm VRootAlias etc/security/pam_env.conf /etc/security/pam_env.conf # Masqurade Address MasqueradeAddress xx.xxx.xxx.xxx # Passive Ports PassivePorts 60000 65535 # Use pam to authenticate (default) and be authoritative AuthPAMConfig proftpd AuthOrder mod_auth_pam.c* mod_auth_unix.c # If you use NIS/YP/LDAP you may need to disable PersistentPasswd #PersistentPasswd off # Don't do reverse DNS lookups (hangs on DNS problems) UseReverseDNS off # Set the user and group that the server runs as User nobody Group nobody # To prevent DoS attacks, set the maximum number of child processes # to 20. If you need to allow more than 20 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode; in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 20 # Disable sendfile by default since it breaks displaying the download speeds in # ftptop and ftpwho UseSendfile off # Defines debug level DebugLevel 10 # Define the log formats LogFormat default "%h %l %u %t \"%r\" %s %b" LogFormat auth "%v [%P] %h %t \"%r\" %s" # Define a system log SystemLog /var/log/proftpd/proftpd.log # Dynamic Shared Object (DSO) loading # See README.DSO and howto/DSO.html for more details # # General database support (http://www.proftpd.org/docs/contrib/mod_sql.html) # LoadModule mod_sql.c # # Support for base-64 or hex encoded MD5 and SHA1 passwords from SQL tables # (contrib/mod_sql_passwd.html) # LoadModule mod_sql_passwd.c # # Mysql support (requires proftpd-mysql package) # (http://www.proftpd.org/docs/contrib/mod_sql.html) # LoadModule mod_sql_mysql.c # # Postgresql support (requires proftpd-postgresql package) # (http://www.proftpd.org/docs/contrib/mod_sql.html) # LoadModule mod_sql_postgres.c # # Quota support (http://www.proftpd.org/docs/contrib/mod_quotatab.html) # LoadModule mod_quotatab.c # # File-specific "driver" for storing quota table information in files # (http://www.proftpd.org/docs/contrib/mod_quotatab_file.html) # LoadModule mod_quotatab_file.c # # SQL database "driver" for storing quota table information in SQL tables # (http://www.proftpd.org/docs/contrib/mod_quotatab_sql.html) # LoadModule mod_quotatab_sql.c # # LDAP support (requires proftpd-ldap package) # (http://www.proftpd.org/docs/directives/linked/config_ref_mod_ldap.html) # LoadModule mod_ldap.c # # LDAP quota support (requires proftpd-ldap package) # (http://www.proftpd.org/docs/contrib/mod_quotatab_ldap.html) # LoadModule mod_quotatab_ldap.c # # Support for authenticating users using the RADIUS protocol # (http://www.proftpd.org/docs/contrib/mod_radius.html) # LoadModule mod_radius.c # # Retrieve quota limit table information from a RADIUS server # (http://www.proftpd.org/docs/contrib/mod_quotatab_radius.html) # LoadModule mod_quotatab_radius.c # # Administrative control actions for the ftpdctl program # (http://www.proftpd.org/docs/contrib/mod_ctrls_admin.html) # LoadModule mod_ctrls_admin.c # # Execute external programs or scripts at various points in the process # of handling FTP commands # (http://www.castaglia.org/proftpd/modules/mod_exec.html) # LoadModule mod_exec.c # # Support for POSIX ACLs # (http://www.proftpd.org/docs/modules/mod_facl.html) # LoadModule mod_facl.c # # Support for using the GeoIP library to look up geographical information on # the connecting client and using that to set access controls for the server # (http://www.castaglia.org/proftpd/modules/mod_geoip.html) # LoadModule mod_geoip.c # # Configure server availability based on system load # (http://www.proftpd.org/docs/contrib/mod_load.html) # LoadModule mod_load.c # # Limit downloads to a multiple of upload volume (see README.ratio) # LoadModule mod_ratio.c # # Rewrite FTP commands sent by clients on-the-fly, # using regular expression matching and substitution # (http://www.proftpd.org/docs/contrib/mod_rewrite.html) # LoadModule mod_rewrite.c # # Support for the SSH2, SFTP, and SCP protocols, for secure file transfer over # an SSH2 connection (http://www.castaglia.org/proftpd/modules/mod_sftp.html) # LoadModule mod_sftp.c # # Use PAM to provide a 'keyboard-interactive' SSH2 authentication method for # mod_sftp (http://www.castaglia.org/proftpd/modules/mod_sftp_pam.html) # LoadModule mod_sftp_pam.c # # Use SQL (via mod_sql) for looking up authorized SSH2 public keys for user # and host based authentication # (http://www.castaglia.org/proftpd/modules/mod_sftp_sql.html) # LoadModule mod_sftp_sql.c # # Provide data transfer rate "shaping" across the entire server # (http://www.castaglia.org/proftpd/modules/mod_shaper.html) # LoadModule mod_shaper.c # # Support for miscellaneous SITE commands such as SITE MKDIR, SITE SYMLINK, # and SITE UTIME (http://www.proftpd.org/docs/contrib/mod_site_misc.html) # LoadModule mod_site_misc.c # # Provide an external SSL session cache using shared memory # (contrib/mod_tls_shmcache.html) # LoadModule mod_tls_shmcache.c # # Use the /etc/hosts.allow and /etc/hosts.deny files, or other allow/deny # files, for IP-based access control # (http://www.proftpd.org/docs/contrib/mod_wrap.html) # LoadModule mod_wrap.c # # Use the /etc/hosts.allow and /etc/hosts.deny files, or other allow/deny # files, as well as SQL-based access rules, for IP-based access control # (http://www.proftpd.org/docs/contrib/mod_wrap2.html) # LoadModule mod_wrap2.c # # Support module for mod_wrap2 that handles access rules stored in specially # formatted files on disk # (http://www.proftpd.org/docs/contrib/mod_wrap2_file.html) # LoadModule mod_wrap2_file.c # # Support module for mod_wrap2 that handles access rules stored in SQL # database tables (http://www.proftpd.org/docs/contrib/mod_wrap2_sql.html) # LoadModule mod_wrap2_sql.c # # Provide a flexible way of specifying that certain configuration directives # only apply to certain sessions, based on credentials such as connection # class, user, or group membership # (http://www.proftpd.org/docs/contrib/mod_ifsession.html) # LoadModule mod_ifsession.c # TLS (http://www.castaglia.org/proftpd/modules/mod_tls.html) <IfDefine TLS> TLSEngine on TLSRequired on TLSRSACertificateFile /etc/pki/tls/certs/proftpd.pem TLSRSACertificateKeyFile /etc/pki/tls/certs/proftpd.pem TLSCipherSuite ALL:!ADH:!DES TLSOptions NoCertRequest TLSVerifyClient off #TLSRenegotiate ctrl 3600 data 512000 required off timeout 300 TLSLog /var/log/proftpd/tls.log <IfModule mod_tls_shmcache.c> TLSSessionCache shm:/file=/var/run/proftpd/sesscache </IfModule> </IfDefine> # Dynamic ban lists (http://www.proftpd.org/docs/contrib/mod_ban.html) # Enable this with PROFTPD_OPTIONS=-DDYNAMIC_BAN_LISTS in /etc/sysconfig/proftpd <IfDefine DYNAMIC_BAN_LISTS> LoadModule mod_ban.c BanEngine on BanLog /var/log/proftpd/ban.log BanTable /var/run/proftpd/ban.tab # If the same client reaches the MaxLoginAttempts limit 2 times # within 10 minutes, automatically add a ban for that client that # will expire after one hour. BanOnEvent MaxLoginAttempts 2/00:10:00 01:00:00 # Allow the FTP admin to manually add/remove bans BanControlsACLs all allow user ftpadm </IfDefine> # Global Config - config common to Server Config and all virtual hosts # See: http://www.proftpd.org/docs/howto/Vhost.html <Global> # Umask 022 is a good standard umask to prevent new dirs and files # from being group and world writable Umask 022 # Allow users to overwrite files and change permissions AllowOverwrite yes <Limit ALL SITE_CHMOD> AllowAll </Limit> </Global> # A basic anonymous configuration, with an upload directory # Enable this with PROFTPD_OPTIONS=-DANONYMOUS_FTP in /etc/sysconfig/proftpd <IfDefine ANONYMOUS_FTP> <Anonymous ~ftp> User ftp Group ftp AccessGrantMsg "Anonymous login ok, restrictions apply." # We want clients to be able to login with "anonymous" as well as "ftp" UserAlias anonymous ftp # Limit the maximum number of anonymous logins MaxClients 10 "Sorry, max %m users -- try again later" # Put the user into /pub right after login #DefaultChdir /pub # We want 'welcome.msg' displayed at login, '.message' displayed in # each newly chdired directory and tell users to read README* files. DisplayLogin /welcome.msg DisplayChdir .message DisplayReadme README* # Cosmetic option to make all files appear to be owned by user "ftp" DirFakeUser on ftp DirFakeGroup on ftp # Limit WRITE everywhere in the anonymous chroot <Limit WRITE SITE_CHMOD> DenyAll </Limit> # An upload directory that allows storing files but not retrieving # or creating directories. <Directory uploads/*> AllowOverwrite no <Limit READ> DenyAll </Limit> <Limit STOR> AllowAll </Limit> </Directory> # Don't write anonymous accesses to the system wtmp file (good idea!) WtmpLog off # Logging for the anonymous transfers ExtendedLog /var/log/proftpd/access.log WRITE,READ default ExtendedLog /var/log/proftpd/auth.log AUTH auth </Anonymous> </IfDefine> <Directory /var/www/html/jokefire.com> <Limit ALL> AllowAll </Limit> </Directory>

4 5

proftpd can't login locally
by Tim Dunphy 13 Aug '11

13 Aug '11

Hello list!! I am trying to setup very simple authentication for proftpd under centos 5.6. But for some reason it isn't working and I was hoping to get some advice into how to resolve the issue. Machine info: [code] [root@VIRTCENT07:~] #cat /etc/redhat-release CentOS release 5.6 (Final) [root@VIRTCENT07:~] #uname -a Linux VIRTCENT07 2.6.18-238.el5xen #1 SMP Thu Jan 13 17:49:40 EST 2011 i686 i686 i386 GNU/Linux [/code] Proftpd version [code] ProFTPD Version 1.3.3e [/code] When I try to log into FTP authentication fails even tho the password is typed correctly [code] [root@VIRTCENT07:~] #/usr/bin/ftp localhost Connected to localhost (127.0.0.1). 220 FTP Server ready. Name (localhost:root): bluethundr 331 Password required for bluethundr Password: 530 Login incorrect. Login failed. Remote system type is UNIX. Using binary mode to transfer files. [/code] I've enabled the ExtendedLogs option in the config and this is what I saw as a result [code] 127.0.0.1 UNKNOWN nobody [12/Aug/2011:11:45:00 -0400] "USER bluethundr" 331 - 127.0.0.1 UNKNOWN nobody [12/Aug/2011:11:45:04 -0400] "PASS (hidden)" 530 - 127.0.0.1 UNKNOWN nobody [12/Aug/2011:11:45:04 -0400] "SYST" 215 - [/code] The user account is stored in LDAP [code] [root@VIRTCENT07:~] #getent passwd | grep bluethundr bluethundr:*:1001:1002:That Guy:/home/bluethundr:/bin/bash [/code] The proftpd user runs the 'nobody' account [code] User nobody Group nobody [/code] Which is also stored in LDAP [code] [root@VIRTCENT07:~] #getent passwd | grep nobody nobody:x:99:99:Nobody:/:/sbin/nologin [/code] The user that ProFTPd runs as is using a valid shell [code] [root@VIRTCENT07:~] #cat /etc/shells /bin/sh /bin/bash /sbin/nologin /bin/tcsh /bin/csh /bin/ksh [/code] And this is what my entire ProFTPd config file is looking like [code] # This is the ProFTPD configuration file # # See: http://www.proftpd.org/docs/directives/linked/by-name.html # Server Config - config used for anything outside a <VirtualHost> or <Global> context # See: http://www.proftpd.org/docs/howto/Vhost.html ServerName "ProFTPD server" ServerIdent on "FTP Server ready." ServerAdmin root@localhost DefaultServer on # Cause every FTP user except adm to be chrooted into their home directory # Aliasing /etc/security/pam_env.conf into the chroot allows pam_env to # work at session-end time (http://bugzilla.redhat.com/477120) VRootEngine on DefaultRoot ~ !adm VRootAlias etc/security/pam_env.conf /etc/security/pam_env.conf # Use pam to authenticate (default) and be authoritative AuthPAMConfig proftpd AuthOrder mod_auth_pam.c* mod_auth_unix.c # If you use NIS/YP/LDAP you may need to disable PersistentPasswd PersistentPasswd off # Don't do reverse DNS lookups (hangs on DNS problems) UseReverseDNS off # Set the user and group that the server runs as User nobody Group nobody # To prevent DoS attacks, set the maximum number of child processes # to 20. If you need to allow more than 20 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode; in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 20 # Disable sendfile by default since it breaks displaying the download speeds in # ftptop and ftpwho UseSendfile off # Define the log formats LogFormat default "%h %l %u %t \"%r\" %s %b" LogFormat auth "%v [%P] %h %t \"%r\" %s" # Dynamic Shared Object (DSO) loading # See README.DSO and howto/DSO.html for more details # # General database support (http://www.proftpd.org/docs/contrib/mod_sql.html) # LoadModule mod_sql.c # # Support for base-64 or hex encoded MD5 and SHA1 passwords from SQL tables # (contrib/mod_sql_passwd.html) # LoadModule mod_sql_passwd.c # # Mysql support (requires proftpd-mysql package) # (http://www.proftpd.org/docs/contrib/mod_sql.html) # LoadModule mod_sql_mysql.c # # Postgresql support (requires proftpd-postgresql package) # (http://www.proftpd.org/docs/contrib/mod_sql.html) # LoadModule mod_sql_postgres.c # # Quota support (http://www.proftpd.org/docs/contrib/mod_quotatab.html) # LoadModule mod_quotatab.c # # File-specific "driver" for storing quota table information in files # (http://www.proftpd.org/docs/contrib/mod_quotatab_file.html) # LoadModule mod_quotatab_file.c # # SQL database "driver" for storing quota table information in SQL tables # (http://www.proftpd.org/docs/contrib/mod_quotatab_sql.html) # LoadModule mod_quotatab_sql.c # # LDAP support (requires proftpd-ldap package) # (http://www.proftpd.org/docs/directives/linked/config_ref_mod_ldap.html) # LoadModule mod_ldap.c # # LDAP quota support (requires proftpd-ldap package) # (http://www.proftpd.org/docs/contrib/mod_quotatab_ldap.html) # LoadModule mod_quotatab_ldap.c # # Support for authenticating users using the RADIUS protocol # (http://www.proftpd.org/docs/contrib/mod_radius.html) # LoadModule mod_radius.c # # Retrieve quota limit table information from a RADIUS server # (http://www.proftpd.org/docs/contrib/mod_quotatab_radius.html) # LoadModule mod_quotatab_radius.c # # Administrative control actions for the ftpdctl program # (http://www.proftpd.org/docs/contrib/mod_ctrls_admin.html) # LoadModule mod_ctrls_admin.c # # Execute external programs or scripts at various points in the process # of handling FTP commands # (http://www.castaglia.org/proftpd/modules/mod_exec.html) # LoadModule mod_exec.c # # Support for POSIX ACLs # (http://www.proftpd.org/docs/modules/mod_facl.html) # LoadModule mod_facl.c # # Support for using the GeoIP library to look up geographical information on # the connecting client and using that to set access controls for the server # (http://www.castaglia.org/proftpd/modules/mod_geoip.html) # LoadModule mod_geoip.c # # Configure server availability based on system load # (http://www.proftpd.org/docs/contrib/mod_load.html) # LoadModule mod_load.c # # Limit downloads to a multiple of upload volume (see README.ratio) # LoadModule mod_ratio.c # # Rewrite FTP commands sent by clients on-the-fly, # using regular expression matching and substitution # (http://www.proftpd.org/docs/contrib/mod_rewrite.html) # LoadModule mod_rewrite.c # # Support for the SSH2, SFTP, and SCP protocols, for secure file transfer over # an SSH2 connection (http://www.castaglia.org/proftpd/modules/mod_sftp.html) # LoadModule mod_sftp.c # # Use PAM to provide a 'keyboard-interactive' SSH2 authentication method for # mod_sftp (http://www.castaglia.org/proftpd/modules/mod_sftp_pam.html) # LoadModule mod_sftp_pam.c # # Use SQL (via mod_sql) for looking up authorized SSH2 public keys for user # and host based authentication # (http://www.castaglia.org/proftpd/modules/mod_sftp_sql.html) # LoadModule mod_sftp_sql.c # # Provide data transfer rate "shaping" across the entire server # (http://www.castaglia.org/proftpd/modules/mod_shaper.html) # LoadModule mod_shaper.c # # Support for miscellaneous SITE commands such as SITE MKDIR, SITE SYMLINK, # and SITE UTIME (http://www.proftpd.org/docs/contrib/mod_site_misc.html) # LoadModule mod_site_misc.c # # Provide an external SSL session cache using shared memory # (contrib/mod_tls_shmcache.html) # LoadModule mod_tls_shmcache.c # # Use the /etc/hosts.allow and /etc/hosts.deny files, or other allow/deny # files, for IP-based access control # (http://www.proftpd.org/docs/contrib/mod_wrap.html) # LoadModule mod_wrap.c # # Use the /etc/hosts.allow and /etc/hosts.deny files, or other allow/deny # files, as well as SQL-based access rules, for IP-based access control # (http://www.proftpd.org/docs/contrib/mod_wrap2.html) # LoadModule mod_wrap2.c # # Support module for mod_wrap2 that handles access rules stored in specially # formatted files on disk # (http://www.proftpd.org/docs/contrib/mod_wrap2_file.html) # LoadModule mod_wrap2_file.c # # Support module for mod_wrap2 that handles access rules stored in SQL # database tables (http://www.proftpd.org/docs/contrib/mod_wrap2_sql.html) # LoadModule mod_wrap2_sql.c # # Provide a flexible way of specifying that certain configuration directives # only apply to certain sessions, based on credentials such as connection # class, user, or group membership # (http://www.proftpd.org/docs/contrib/mod_ifsession.html) # LoadModule mod_ifsession.c # TLS (http://www.castaglia.org/proftpd/modules/mod_tls.html) <IfDefine TLS> TLSEngine on TLSRequired on TLSRSACertificateFile /etc/pki/tls/certs/proftpd.pem TLSRSACertificateKeyFile /etc/pki/tls/certs/proftpd.pem TLSCipherSuite ALL:!ADH:!DES TLSOptions NoCertRequest TLSVerifyClient off #TLSRenegotiate ctrl 3600 data 512000 required off timeout 300 TLSLog /var/log/proftpd/tls.log <IfModule mod_tls_shmcache.c> TLSSessionCache shm:/file=/var/run/proftpd/sesscache </IfModule> </IfDefine> # Dynamic ban lists (http://www.proftpd.org/docs/contrib/mod_ban.html) # Enable this with PROFTPD_OPTIONS=-DDYNAMIC_BAN_LISTS in /etc/sysconfig/proftpd <IfDefine DYNAMIC_BAN_LISTS> LoadModule mod_ban.c BanEngine on BanLog /var/log/proftpd/ban.log BanTable /var/run/proftpd/ban.tab # If the same client reaches the MaxLoginAttempts limit 2 times # within 10 minutes, automatically add a ban for that client that # will expire after one hour. BanOnEvent MaxLoginAttempts 2/00:10:00 01:00:00 # Allow the FTP admin to manually add/remove bans BanControlsACLs all allow user ftpadm </IfDefine> # Global Config - config common to Server Config and all virtual hosts # See: http://www.proftpd.org/docs/howto/Vhost.html <Global> # Umask 022 is a good standard umask to prevent new dirs and files # from being group and world writable Umask 022 # Allow users to overwrite files and change permissions AllowOverwrite yes <Limit ALL SITE_CHMOD> AllowAll </Limit> </Global> # A basic anonymous configuration, with an upload directory # Enable this with PROFTPD_OPTIONS=-DANONYMOUS_FTP in /etc/sysconfig/proftpd <IfDefine ANONYMOUS_FTP> <Anonymous ~ftp> User ftp Group ftp AccessGrantMsg "Anonymous login ok, restrictions apply." # We want clients to be able to login with "anonymous" as well as "ftp" UserAlias anonymous ftp # Limit the maximum number of anonymous logins MaxClients 10 "Sorry, max %m users -- try again later" # Put the user into /pub right after login #DefaultChdir /pub # We want 'welcome.msg' displayed at login, '.message' displayed in # each newly chdired directory and tell users to read README* files. DisplayLogin /welcome.msg DisplayChdir .message DisplayReadme README* # Cosmetic option to make all files appear to be owned by user "ftp" DirFakeUser on ftp DirFakeGroup on ftp # Limit WRITE everywhere in the anonymous chroot <Limit WRITE SITE_CHMOD> DenyAll </Limit> # An upload directory that allows storing files but not retrieving # or creating directories. <Directory uploads/*> AllowOverwrite no <Limit READ> DenyAll </Limit> <Limit STOR> AllowAll </Limit> </Directory> # Don't write anonymous accesses to the system wtmp file (good idea!) WtmpLog off # Logging for the anonymous transfers ExtendedLog /var/log/proftpd/access.log WRITE,READ default ExtendedLog /var/log/proftpd/auth.log AUTH auth </Anonymous> </IfDefine> [/code] I have also tried raising the debug level to 10 [code] DebugLevel 10 SystemLog /var/log/proftpd/proftpd.log And this was the info I saw in the log file: Aug 12 15:13:48 VIRTCENT07 proftpd[9959] 192.168.1.29: ProFTPD 1.3.3e (maint) (built Thu Apr 7 2011 14:41:56 UTC) standalone mode STARTUP Aug 12 15:13:53 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): AuthOrder in effect, resetting auth module order Aug 12 15:13:53 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): connected - local : 127.0.0.1:21 Aug 12 15:13:53 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): connected - remote : 127.0.0.1:40875 Aug 12 15:13:53 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): FTP session opened. Aug 12 15:13:55 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'USER bluethundr' to mod_tls Aug 12 15:13:55 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'USER bluethundr' to mod_core Aug 12 15:13:55 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'USER bluethundr' to mod_core Aug 12 15:13:55 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'USER bluethundr' to mod_delay Aug 12 15:13:55 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'USER bluethundr' to mod_auth Aug 12 15:13:55 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching CMD command 'USER bluethundr' to mod_auth Aug 12 15:13:55 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching POST_CMD command 'USER bluethundr' to mod_delay Aug 12 15:13:55 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching LOG_CMD command 'USER bluethundr' to mod_log Aug 12 15:13:57 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'PASS (hidden)' to mod_tls Aug 12 15:13:57 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'PASS (hidden)' to mod_core Aug 12 15:13:57 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'PASS (hidden)' to mod_core Aug 12 15:13:57 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'PASS (hidden)' to mod_vroot Aug 12 15:13:57 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): mod_vroot/0.8.5: vroot registered Aug 12 15:13:57 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'PASS (hidden)' to mod_delay Aug 12 15:13:57 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'PASS (hidden)' to mod_auth Aug 12 15:13:57 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching CMD command 'PASS (hidden)' to mod_auth Aug 12 15:13:57 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): retrieved UID 1001 for user 'bluethundr' Aug 12 15:13:57 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): retrieved group IDs: 1002, 500 Aug 12 15:13:57 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): retrieved group name: bluethundr Aug 12 15:13:57 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): ROOT PRIVS at mod_auth_pam.c:312 Aug 12 15:13:58 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): RELINQUISH PRIVS at mod_auth_pam.c:482 Aug 12 15:13:58 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): USER bluethundr (Login failed): Incorrect password. Aug 12 15:13:58 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching POST_CMD_ERR command 'PASS (hidden)' to mod_vroot Aug 12 15:13:58 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): mod_vroot/0.8.5: vroot unregistered Aug 12 15:13:58 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching POST_CMD_ERR command 'PASS (hidden)' to mod_delay Aug 12 15:13:58 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching LOG_CMD_ERR command 'PASS (hidden)' to mod_log Aug 12 15:13:58 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching LOG_CMD_ERR command 'PASS (hidden)' to mod_auth Aug 12 15:13:58 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'SYST' to mod_tls Aug 12 15:13:58 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'SYST' to mod_core Aug 12 15:13:58 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching PRE_CMD command 'SYST' to mod_core Aug 12 15:13:58 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching CMD command 'SYST' to mod_core Aug 12 15:13:58 VIRTCENT07 proftpd[9964] 192.168.1.29 (127.0.0.1[127.0.0.1]): dispatching LOG_CMD command 'SYST' to mod_log [/code] I was able to generate some additional debugging information. not sure how much this helps, but here ya go.. [code] - using TCP receive buffer size of 87380 bytes - using TCP send buffer size of 16384 bytes - testing Unix domain socket using S_ISFIFO - testing Unix domain socket using S_ISSOCK - using S_ISSOCK macro for Unix domain socket detection - mod_tls/2.4.2: using OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 - retrieved UID 99 for user 'nobody' - retrieved GID 99 for group 'nobody' - using TCP receive buffer size of 87380 bytes - using TCP send buffer size of 16384 bytes - testing Unix domain socket using S_ISFIFO - testing Unix domain socket using S_ISSOCK - using S_ISSOCK macro for Unix domain socket detection - mod_tls/2.4.2: using OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 - retrieved UID 99 for user 'nobody' - retrieved GID 99 for group 'nobody' - <IfDefine>: skipping 'TLS' section at line 178 - <IfDefine>: skipping 'DYNAMIC_BAN_LISTS' section at line 195 - <IfDefine>: skipping 'ANONYMOUS_FTP' section at line 228 - UseReverseDNS off, returning IP address instead of DNS name 192.168.1.29 - 192.168.1.29 - Config for ProFTPD server: 192.168.1.29 - ServerIdent 192.168.1.29 - DefaultServer 192.168.1.29 - VRootEngine 192.168.1.29 - DefaultRoot 192.168.1.29 - VRootAlias 192.168.1.29 - AuthPAMConfig 192.168.1.29 - AuthOrder 192.168.1.29 - UserID 192.168.1.29 - UserName 192.168.1.29 - GroupID 192.168.1.29 - GroupName 192.168.1.29 - UseSendfile 192.168.1.29 - DebugLevel 192.168.1.29 - ExtendedLog 192.168.1.29 - Limit 192.168.1.29 - AllowAll 192.168.1.29 - Umask 192.168.1.29 - AllowOverwrite 192.168.1.29 - ROOT PRIVS at mod_delay.c:354 192.168.1.29 - RELINQUISH PRIVS at mod_delay.c:359 192.168.1.29 - ROOT PRIVS at mod_ctrls.c:1139 192.168.1.29 - RELINQUISH PRIVS at mod_ctrls.c:1141 192.168.1.29 - mod_lang/0.9: binding to text domain 'proftpd' using locale path '/usr/share/locale' 192.168.1.29 - mod_lang/0.9: using locale files in '/usr/share/locale' 192.168.1.29 - mod_lang/0.9: added the following supported languages: zh_CN, bg_BG, ja_JP, en_US, ru_RU, zh_TW, ko_KR, fr_FR, it_IT 192.168.1.29 - retrieved group ID: 99 192.168.1.29 - setting group ID: 99 192.168.1.29 - SETUP PRIVS at main.c:3131 192.168.1.29 - ROOT PRIVS at main.c:2153 192.168.1.29 - RELINQUISH PRIVS at main.c:2160 192.168.1.29 - ROOT PRIVS at main.c:2488 192.168.1.29 - deleting existing scoreboard '/var/run/proftpd/proftpd.scoreboard' I was hoping someone out there might be able to recognize what the problem may be and have some suggestions that might help resolve the issue.[/code] thanks in advance!! tim

2 1

drop manitu.net
by m.roth＠5-cent.us 13 Aug '11

13 Aug '11

listadmin, Can you PLEASE, PLEASE find *any* other blacklist than manitu? This asshole's method was ok a dozen years ago; these days, with hosting sites hosting tens or hundreds of thousands of domains, with too many running Windows, and so infected and sending out spam. They then send all mail via one mailhost, with the result that those of us with *no* spam coming out are frequently blocked. This ain't the first time for me with this jerk, either. A few years ago, Cogeco in Canada was using him, and on and off for *months* I was blocked from exchanging email with an old friend... because I was mailing from Roadrunner in Chicago (hosting hundreds of thousands of households), until my friend dropped Cogeco. mark, who is wondering if this will be blocked

15 44

instlaling onto mdadm centos 6
by William Warren 13 Aug '11

13 Aug '11

I am attempting to use mdraid for booting my machine but it never does. Does the centos 5 guide for linux software raid work for centos 6?

2 2

smartd and palimpsest
by Frank Cox 13 Aug '11

13 Aug '11

I notice that the smartd service is not running by default on a new installation. But palimpsest seems to get updated statistics every so often as when I check the statistics on a drive it says "last updated" some number of minutes ago. So if smartd isn't running, where does palimpsest get its information from and what is updating it? Second question, what would enabling the smartd service gain me that I don't have right now? -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com www.creekfm.com - FIFTY THOUSAND WATTS of POW WOW POWER!

4 11

setting the screen background with gconftool-2
by Jerry Geis 12 Aug '11

12 Aug '11

I centos 5 I can run this command: su myuser -c "/usr/bin/gconftool-2 -t string --set /desktop/gnome/background/picture_filename /usr/share/backgrounds/images/mypic.png" and this works fine. under centos 6 it does not appear to be working... I can run the similiar --get command and it tells me its set to what I asked for. However the screen is not showing mypic.png I can use gconf-editor to set it manually and it works. I looked to see if gconfd-2 is running and it is. What might be happening that the screen is not changing and showing the actual pic? Thanks, Jerry

1 1

Wrong directory permissions in RPMs build on CentOS6
by Simon Matter 12 Aug '11

12 Aug '11

Hi, I have rebuilt all our source RPMs on CentOS 6 and found they sometimes differ in directory permissions compared to those built on CentOS 3, 4 and 5. The problem is that %defattr overrides %attr on directories. Have a look at this example spec file: --%<--------------------------------- Summary: foo Name: mini Version: 0.1 Release: 1%{?dist} Group: System Environment/Daemons License: GPLv2+ BuildArch: noarch BuildRoot: %{_tmppath}/%{name}-%{version}-root %description foo %prep %install %{__install} -d %{buildroot}/XXX %files %defattr(0644,root,root,0755) %attr(0730,root,nobody) %dir /XXX --%<--------------------------------- The rpm file list build on EL5 looks like this: drwx-wx--- 2 root nobody 0 Aug 12 14:16 /XXX The same rebuilt on EL6: drwxr-xr-x 2 root nobody 0 Aug 12 14:19 /XXX So the EL6 package seems wrong. Novell has a BZ entry about this bug: https://bugzilla.novell.com/show_bug.cgi?id=629048 Now my questions 1) did I miss the obvious? 2) am I the only one seeing this? 3) is this fixed in EL6.1 (can anyone test this on RHEL6.1?) I've looked up RedHat's bugzilla but couldn't find anything related. Regards, Simon

1 0

← Newer
1
...
11
12
13
14
15
16
17
...
21
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss August 2011