Discuss May 2012

discuss@lists.centos.org

193 participants
203 discussions

kernel: nfs: RPC call returned error 88
by Rhugga Harper 18 May '12

18 May '12

We have a 2-node Oracle RAC that keeps getting the following error: kernel: nfs: RPC call returned error 88 The storage being mounted is netapp. We don't see any errors/issues on the storage itself or the switches this client is connecting thru. The NFS network is a 2-interface ( 2 x 1Gb UTP) bond which shows no errors of any kind. We are mounting with the following mount options: rw,noac,nointr,bg,hard,timeo= 600,wsize=32768,rsize=32768,nfsvers=3,tcp This problem sometimes hits the OCR votedisk shares and causes the instance to crash. These systems were upgraded to 5.6 back in January. Currently running 2.6.32-300.4.1. Thanks for any info,

2 1

Postfix will not start due to permission errors on CentOS 6.2 x86
by Gilbert Sebenste 17 May '12

17 May '12

Hello everyone, I cannot get the Postfix service to start on my pristine copy of CentOS 6.2 (installed straight from a DVD, and 6.2 directly, not 6.0 with upgrades...not thatit should matter). Anyway, I copied over /var/spool/mail to this system by using tar, as well as /etc/services and /etc/passwd, etc. Now, it doesn't want to start. I get permission errors like: postfix/master: warning: /usr/libexec/postfix/pickup pid 2006 exit 1 postfix/master:warning /usr/libexec/postfix/pickup: bad command startup -- throttling postfix/pickup: fatal: scan_dir_push: open directory maildrop: permission denied warning: the postfix sendmail command has set-uid root file permissions warning: or the command is run from a set-uid root process warning: the Postfix sendmail command must be installed without set-uid root file permissions Now, I Googled these errors, and didn't see any good specific help for CentOS. So, I did a yum erase postfix, which also erased dependencies. After I did that, I erased the /etc/postfix directory. I then reinstalled postfix with all the dependencies...and got the same errors. Then I googled the CentOS mailing list for help...nothing that applied to me turned up that I saw. I'm stumped. Does anyone have any ideas what the issue could be? Gilbert ******************************************************************************* Gilbert Sebenste ******** (My opinions only!) ****** *******************************************************************************

5 8

Re: [CentOS] CONFIG_ARPD turned on in centosplus kernel.
by Akemi Yagi 17 May '12

17 May '12

On Sat, May 5, 2012 at 12:40 PM, Steve Clark <sclark(a)netwolves.com> wrote: > http://bugs.centos.org/view.php?id=5709 > > I actually took the latest centosplus kernel srpm and got it going in my > environment (would like to have > semi official support though ;-) ). It has been running stable for a > couple of weeks now. > > I have 4 systems setup using it and opennhrp in a DMVPN hub and spoke > arrangement. > I have 2 hubs with each of the spokes connected to each of the hubs. The > spokes would be units in the field while > the hubs would be at HQ in a failover environment using OSPF amongst them > all. I've updated the RFE you filed with some info. Will be nice if you also add the above note in there. Akemi

2 1

OT: Rewrite part of a message with rsyslog
by C. L. Martinez 17 May '12

17 May '12

Hi all, Sorry for the off-topic, but I have not found how to do this. I have installed a centos6 server to act as a syslog receiver. I need to rewrite all messages that comes from one server. For example a part of the message is: "27April2012 10:33:44 172.1.2.2 data >". Sometimes between 27April2012 and 10:33:44 comes with one white space, sometimes with two, etc. I need to normalize this log to use only one white space between all fileds until ">" character. Somebody knows how can I do this??

3 5

Problem building latest Courier-authlib on CentOS4
by Bowie Bailey 17 May '12

17 May '12

Upgrading to CentOS6 is on my list, but I'm trying to get the latest Courier-MTA running at the moment. I downloaded the current courier tarballs and tried to build the rpms on a CentOS4 system. I got these errors: $ rpmbuild -tb courier-authlib-0.64.0.tar.bz2 ... libtool: link: ar cru .libs/libauthpipe.a authpipe.o authpipelib.o libtool: link: ranlib .libs/libauthpipe.a libtool: link: ( cd ".libs" && rm -f "libauthpipe.la" && ln -s "../libauthpipe.la" "libauthpipe.la" ) libtool: link: gcc -I/usr/include/mysql -g -pipe -m32 -march=i386 -mtune=pentium4 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -fno-strict-aliasing -I/usr/include -O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -Wall -I.. -I./.. -o authdaemontest authdaemontest.o ./.libs/libcourierauthcommon.a /home/bowieb/rpm/BUILD/courier-authlib-0.64.0/.libs/libcourierauth.a -ldl libtool: link: cannot find the library `libltdl/libltdlc.la' or unhandled argument `libltdl/libltdlc.la' make[2]: *** [authdaemondprog] Error 1 make[2]: *** Waiting for unfinished jobs.... libtool: link: gcc -I/usr/include/mysql -g -pipe -m32 -march=i386 -mtune=pentium4 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -fno-strict-aliasing -I/usr/include -O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -Wall -I.. -I./.. -o .libs/authpasswd authpasswd.o ./.libs/libcourierauthcommon.so /home/bowieb/rpm/BUILD/courier-authlib-0.64.0/.libs/libcourierauth.so libhmac/.libs/libhmac.a md5/.libs/libmd5.a sha1/.libs/libsha1.a rfc822/.libs/libencode.a -ldl -Wl,-rpath -Wl,/usr/lib/courier-authlib make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 error: Bad exit status from /var/tmp/rpm-tmp.93944 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.93944 (%build) I asked on the Courier list and Sam said that my libtool is too old. He suggested adding an "autoreconf" line to the spec file, but that just generated an error that my Autoconf is too old. Can someone give me a pointer as to how to fix this? Thanks -- Bowie

2 2

mysql secure installation and multi mysqld
by Bob Hoffman 17 May '12

17 May '12

If you adjust the my.cnf file to make separate instances of mysql..... How would you go through the mysql secure installation? Is is possible or must it all be done manually for each one? is it possible to make each one of those instances a replicate/slave of a different master (thus a backup mysql server in a way?) working on this now, but having issues getting it to work. (centos 6)

2 2

Notes on booting CentOS 6 natively on GPT with an EFI bootloader such as Chameleon without BIOS GPT/EFI support.
by Lamar Owen 16 May '12

16 May '12

Ok, did some experiments. Here's the scoop. You will need a live USB key of CentOS 6 with a persistence layer (overlay) and the EPEL gdisk package installed to make this thing boot. On a system with Chameleon already installed, boot the CentOS 6 install media. Installing Chameleon without OSX is an adventure that I've not done, so a 'testing' OSX install (10.6) with the Chameleon bootloader installed was used; once Chameleon is in the EFI boot partition in theory you can blow away the HFS+ OSX filesystem, but I've not tried it. This involves partitioning the disk as GPT, and there are numerous howtos out there for many motherboards and laptops; the key is to get Chameleon in the MBR and the EFI boot partition properly created, set up with a protective MBR, and populated. Install to the free space on the system, using a /boot of about 500MB, swap space to taste, and other filesystems as you like. When the install prompts for bootloader installation location, you DO NOT want to install to the MBR (Chameleon is there); rather, install it to the /boot partition (on my test system this was /dev/sda3). Finish the installation. It won't yet be bootable. Now, boot your liveUSB stick. When you get your desktop, pull up a terminal and become root. At the root prompt, invoke gdisk just like you would fdisk, making sure to get the right disk device and partition. The command set for gdisk is virtually identical to fdisk. Use 'p' to list the partitions; you'll see your /boot as a partition type of 'EF00' as set by parted in the installer. You want to change that partition type to '0700' instead. The bootable partition must remain the small EFI boot partition of type EF00. You can name the partitions with the 'c' command; I encourage this. Use the 'w' to write out the GPT when done, and shut down. Remove the CentOS 6 liveUSB and reboot. Chameleon should automatically pick up the 'Linux' system in its bootsplash. Now, it may be possible to get parted to make the /boot partition to be type 0700 instead of EF00; didn't try that, since I know gdisk will do it correctly. As I was using a Dell Inspiron 640m, I used a Chameleon boot CD for a Dell Latitude D620 to good effect; you can find that on insanelymac.com. That particular Chameleon install includes a Dell logo and such, and may be some different from your particular Chameleon install. I have not tried this with a drive larger than 2TB; google for 'Chameleon bootloader EFI 2TB' to see the progress in this area. In theory this would allow a BIOS booting machine to boot directly on a 2TB+ drive using GPT without having EFI or variant in the BIOS. Once I get a single drive large than 2TB, or free up a machine with an FC connection and a > 2TB LUN attached to it, I'll try that out, and attempt to do a Chameleon installation without the OSX step in between. -- Lamar Owen Chief Information Officer Pisgah Astronomical Research Institute 1 PARI Drive Rosman, NC 28772 http://www.pari.edu

1 0

ldirectord package on centos 6
by Dennis Jacobfeuerborn 16 May '12

16 May '12

Hi, I'm looking for the ldirectord package but can't find it. Previously this was available as "heartbeat-ldirectord" and nowadays it is built as an independent package from "resource-agents" however neither seems to be available either in core centos 6 or epel. Where did it go? Regards, Dennis

2 4

CentOS-announce Digest, Vol 87, Issue 10
by centos-announce-request＠centos.org 16 May '12

16 May '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2012:0571 Moderate CentOS 6 kernel Update (Johnny Hughes) 2. CEBA-2012:0672 CentOS 5 binutils Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 16 May 2012 09:19:09 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0571 Moderate CentOS 6 kernel Update To: centos-announce(a)centos.org Message-ID: <20120516091909.GA20284(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0571 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0571.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c647a4f968988d4a5419e5afed5cb74c52e3d9dfba09baafa7d00ebf5a635a4f kernel-2.6.32-220.17.1.el6.i686.rpm 49120071c940ec1d48c5e2aed27fbce8f0bae536993e5fb8fb693b5fcf600baf kernel-debug-2.6.32-220.17.1.el6.i686.rpm fa2a72da7dd451d8d646c4adf7be4145ccd87697a9919abe2a4ece562e6ff83d kernel-debug-devel-2.6.32-220.17.1.el6.i686.rpm 103799d749f8015da8632eda2cfa3447edc6b4c306432fc784d791e1800ba8e4 kernel-devel-2.6.32-220.17.1.el6.i686.rpm f2cee8e26a93d4dcffb4ca48967362a906aad0420ab05a566be5dd7a6274dbc5 kernel-doc-2.6.32-220.17.1.el6.noarch.rpm 5731558ecae43f8b1733da18318b1218d078b003741341001a75599ae8948888 kernel-firmware-2.6.32-220.17.1.el6.noarch.rpm 103af35fca156730f22f4907019dc5c43e312305f2696c260f9ee67c84f2af21 kernel-headers-2.6.32-220.17.1.el6.i686.rpm 41dc79e5e4454a0f740109d381562a39afa1839faeb0278e1129f95be78872e0 perf-2.6.32-220.17.1.el6.i686.rpm 702657e91e418bb3e22e6f2ee0226641306a2f428358fa42fa0bcce9d2f51d84 python-perf-2.6.32-220.17.1.el6.i686.rpm x86_64: 693ca4053772d93f38fa2a19393e022811bd11a349c7bd211b54a81523f1b4bf kernel-2.6.32-220.17.1.el6.x86_64.rpm 53ba0a7f2d9763d868e29c4f49e382e69099a4366b3dd714a4697e93803c3ec6 kernel-debug-2.6.32-220.17.1.el6.x86_64.rpm f527dbc9ced3beb286bf4fd13c08b4c98cfc6db608d61c982179554366023e15 kernel-debug-devel-2.6.32-220.17.1.el6.x86_64.rpm f11da0faa2d01f207dba99b0a9cd6e4f30f2ae3e4e08f26cc0ad9453a7eae433 kernel-devel-2.6.32-220.17.1.el6.x86_64.rpm 9d28a169e8c37a3b133835eff722fa342565e2bf6b03972aef2cb5183083b97a kernel-doc-2.6.32-220.17.1.el6.noarch.rpm 61600b65da0b06f393eb06da0b7dec6167b5bb9aebff30c74079d5ca3d63af87 kernel-firmware-2.6.32-220.17.1.el6.noarch.rpm 0810b98c53846cb87c996d46cecedae999e3f75ded31c38928d17f9de56375c3 kernel-headers-2.6.32-220.17.1.el6.x86_64.rpm 35e388db01227bade30dbe2b8ae7f74808e2a425ad851626c548a14127db096f perf-2.6.32-220.17.1.el6.x86_64.rpm c97d385accfaa81fb2948fe6fadd69c361751e5196c0752aed15d3375df9dcfd python-perf-2.6.32-220.17.1.el6.x86_64.rpm Source: d2599082fda0e6887921bfca2cdb2d5e81dd25f5fce37c9d5f443ed2bba2ca69 kernel-2.6.32-220.17.1.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 16 May 2012 12:16:44 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0672 CentOS 5 binutils Update To: centos-announce(a)centos.org Message-ID: <20120516121644.GA29360(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0672 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0672.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 96193a1ab55252b279deb9147564395ca11a6d4abd5c6e78416eedbcbfa33fa4 binutils-2.17.50.0.6-20.el5_8.3.i386.rpm 5ce6b8151aa51e7adea5ba135059334a3484f2df460443eb44c5df137c5b20ad binutils-devel-2.17.50.0.6-20.el5_8.3.i386.rpm x86_64: f07f1302e7cfb72c5041022e096e99b9c387639f141a41b0b55e89aca48cdd44 binutils-2.17.50.0.6-20.el5_8.3.x86_64.rpm 5ce6b8151aa51e7adea5ba135059334a3484f2df460443eb44c5df137c5b20ad binutils-devel-2.17.50.0.6-20.el5_8.3.i386.rpm 36e5acba1e89128f5cb11277d4b9c6c1ba91ee3ddadf2fc9418515b80125d91c binutils-devel-2.17.50.0.6-20.el5_8.3.x86_64.rpm Source: 4a407431f5c5865c9ae185db7658e18e6f54160494750b9f8f7f4665d0674f09 binutils-2.17.50.0.6-20.el5_8.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 87, Issue 10 ***********************************************

1 0

OSS DSP sound card input on CentOS 6.2?
by Gilbert Sebenste 16 May '12

16 May '12

Hello everyone, I'm streaming audio on CentOS 5.8 with no problem, even on a cheap sound card using DarkIce as the input tool. For the input under CentOS5, I use: device = /dev/dsp # OSS DSP soundcard device for the audio input But under CentOS 6.2, there is no such device. I see /dev/snd, and it has: controlC0 hwC0D2 midiC0D1 pcmC0D0p pcmC0D2p pcmC1D0p seq controlC1 hwC1D0 midiC0D2 pcmC0D1c pcmC0D3p pcmC1D1p timer hwC0D0 midiC0D0 pcmC0D0c pcmC0D2c pcmC1D0c pcmC1D2c But nothing that looks OSS-ish to me. Any ideas as to what I need to point at, and why? Any help is greatly appreciated. Thanks! Gilbert ******************************************************************************* Gilbert Sebenste ******** (My opinions only!) ****** *******************************************************************************

2 3

← Newer
1
...
8
9
10
11
12
13
14
...
21
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss May 2012