Discuss

discuss@lists.centos.org

34758 discussions

Start a nNew thread

madwifi not working for 5.2 x64
by sumit agarwal 25 May '09

25 May '09

hi . i installed madwifi on 5.2 x64 but it dosent seem to be working any clues? pls help :) --

4 5

Send syslog to a remote server
by hce 25 May '09

25 May '09

Hi, I am running CentOS 5 and I tried to config flowing statement in syslog.conf to send syslog messages to a remote server running on FC 9, but it did not work. There was nothing send to the FC9. "*.info;mail.none;authpriv.none;cron.none @@192.168.1.5" Could anyone advice whether the syslog in CentOS 5 does not support remote server, or I could be missing something? System: DISTRO_NAME=centos DISTRO_VERSION=5 DISTRO_CODENAME=final DISTRO_PATCHLEVEL=5 DISTRO_ARCH=x86_64 DISTRO_KERNEL=2.6.18_53.el5 Thank you. Kind Regards, jupiter

7 9

Auto-installing security updates?
by Anne Wilson 25 May '09

25 May '09

I've been asked to think about setting up an installation for a recently- widowed man. His needs are small - mail, Internet, on-line banking, basically - but his wife dealt with all of it on her laptop and he feels very insecure. It seems to me that CentOS would be perfect for him except for the need to keep it securely patched. I'm wondering if it's possible to auto-install security updates - for that matter, with so small a set of applications perhaps auto-installing every update would be good enough. Maybe this could be done with a script run under cron.daily, so that anacron picks it up? I'd be glad of any advice. Anne

20 42

32bit vs 64bit memory usage
by George Negoita 25 May '09

25 May '09

Hi! I ran the following test on 3 different setups: #!/usr/bin/php <? $n=1024*256; $usage1=memory_get_usage(); $rusage1=memory_get_usage(true); $a=array(); for($i=0;$i<$n;$i++) $a[]=0; $usage2=memory_get_usage(); $rusage2=memory_get_usage(true); echo ($usage2-$usage1).'/'.($rusage2-$rusage1); ?> ...and I got the following results: 32bit kernel & 32bit php - 18875368/19136512 64bit kernel & 64bit php - 35654376/35913728 64bit kernel & 32bit php - 18875368/19136512 Some client has a 64bit xen-based VPS with 512MB RAM user for webhosting and I'm wondering if I can free some memory installing httpd&php i386 modules. I understand that 64bit programs use more memory because the pointers, integers, etc. are now 64bit instead of 32bit, but running a 32bit program on a 64bit architecture is the same as running that program on a 32bit architecture (just concerning the memory used)? At least, that's my conclusion after running the above test. Am I wrong? Thank you! PS: No, the client's service provider does not offer a 32bit vps platform and the client won't change the provider or pay for additional memory. -- George Negoita System Administrator iMedia Plus Group

4 3

Video on (video-capable digital) still camera not accessible
by MHR 25 May '09

25 May '09

I'm looking for any intelligent commentary on this - it may be a little off topic, but I'm wondering if anyone knows about this. This isn't short, so bear with me. Yesterday, I tried to download a video off of one of my digital still cameras that also takes videos (Canon Powershot SX10 iS) on my CentOS x86_64 5.3 system. When I plugged the camera into a USB port and turned it on, it showed no images available, AND no device showed up mounted for it. Now, this is not entirely unusual. I know there's a .mov on the camera, two actually, so I tried putting the SD card in a card reader and plugged that in. Nothing. No "disk" was mounted, which is what normally happens when I do that. I ran lsusb, and got this: [mhr@mhrichter ~]$ lsusb Bus 001 Device 072: ID 0aec:3260 Neodio Technologies Corp. 7-in-1 Card Reader Bus 001 Device 001: ID 0000:0000 Bus 002 Device 009: ID 03f0:0205 Hewlett-Packard ScanJet 3300c Bus 002 Device 001: ID 0000:0000 Bus 002 Device 003: ID 04f9:0033 Brother Industries, Ltd That looks normal, but no device is mounted. I tried doing a gnome-mount on /dev/sdd and /dev/sde and both came up with a "no data" error. I tried mounting /dev/sdd (which is where the device should be) as a vfat, and that hung. I got a similar response when I plugged in the camera with the SD card in it and it shows up in lsusb: [mhr@mhrichter ~]$ lsusb Bus 001 Device 073: ID 04a9:318d Canon, Inc. Bus 001 Device 001: ID 0000:0000 Bus 002 Device 009: ID 03f0:0205 Hewlett-Packard ScanJet 3300c Bus 002 Device 001: ID 0000:0000 Bus 002 Device 003: ID 04f9:0033 Brother Industries, Ltd I even took a photo, just so there would be a recognizable image on the camera for the Image Importer, and that worked, but the two .mov files were still not showing up anywhere. Then I figured, well, maybe if CentOS doesn't like this, my Windows XP guest might be able to do something with it. (Hahahahaha! Not funny....) I brought up the Win guest, attached the USB "drive" for the camera and Windows installed the device just fine. I opened an Explorer window and the camera was there, with the photo and two .mov files in its folder, so I went in and clicked the photo and that was it. The Windows guest crashed, and when it came back up, it booted so slowly I wasn't sure it was going to boot at all, and the network connections were gone. I tried a number of things (restart Samba, reboot Windows in safe mode, then back to normal, restart Samba with Windows running, on and on). Nothing worked. All the TCP/IP settings were the same, and the network "card" showed one connection that was active, but no IP address, no path to host, pings all failed, etc. This morning, I figured that, since the guest network seemed to have been blown away completely, I'd reconfigure it and try again. Voila! All my drives are now sharing properly and the NAT network between host and guest works just fine. I am wondering if anyone could hazard a guess w.r.t. these issues: 1) CentOS not seeing either device (camera or SD-in-reader) as mountable 2) How to mount the SD card manually given that it does not appear to be a vfat (which is how most of these have shown up before IIRC). 3) VMWare losing its network configuration (or whatever it lost) that smashed its network connection to the host 4) (most important) Any ideas on how to get at the video files on the SD card (if I can mount it as the right kind of fs, that would be enough) Thanks. mhr

6 14

NetworkManager under CentOS 4 *without* GNome...
by Robert Heller 24 May '09

24 May '09

I have been *manually* dealing with my wired and wireless network interfaces on my laptop. I have a pair of config files (in /etc/sysconfig/network-scripts/: ifcfg-eth0 (wired: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile)) and ifcfg-eth1 (wireless: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter), both with USERCTL=true (and ifcfg-eth0 also has ONBOOT=true). I have manually fiddled with the ESSID, etc. in ifcfg-eth1 when needed, but this is tiresome. I would like to use NetworkManager, since this sounds like it might be easier. I don't use the GNome desktop, so I probably won't be able to use the stock GNome applet (this would not be a problem normally since I would just write my own GUI thingy, but there seems to be a complete lack of documentation for the GNome applet! But I have the source code and will figure it out eventually.). I use FVWM as a window manager and don't use a "desktop manager" at all. I run CentOS 4.8 on my laptop (and no, I am in no hurry to upgrade to CentOS 5). I've started NetworkManager (as root) and started NetworkManagerInfo (both as myself and a 'dummy' user with a vanila GNome desktop), but NetworkManagerInfo complains that there are no network interfaces available. Where does NetworkManager/NetworkManagerInfo get information about available network interfaces? I know that *both* interfaces work just fine using the manual startup (eg ifup eth0 and ifup eth1). Is there a config file I need to mess with? If so, where is it? I tried googling and could not find any difinitively usefull information (http://www.ces.clemson.edu/linux/nm.shtml has some information for FC5, but it is not totally helpful). -- Robert Heller -- 978-544-6933 Deepwoods Software -- Download the Model Railroad System http://www.deepsoft.com/ -- Binaries for Linux and MS-Windows heller(a)deepsoft.com -- http://www.deepsoft.com/ModelRailroadSystem/

2 2

Weird performance problem
by Ugo Bellavance 24 May '09

24 May '09

Hi, I'm running a CentOS 4. server and I sometimes face a weird problem. It is a weird performance problem, and here is how I discovered it. This server runs OpenVZ virtual machines, and one of them is an asterisk server for my personal use. The first symptom of the problem is that the voice quality became flaky. So I logged on the server to see what could be eating cpu cycles, when I ran top, it took almost one minute before top actually showed. Another hint is that when I run dstat (a monitoring utility that is a mix of iostat and vmstat and other stats), I often get a "missed xx ticks", where xx is a number. Example (current) (sorry for the wrap): ----total-cpu-usage---- -dsk/total- -net/total- ---paging-- ---system-- usr sys idl wai hiq siq| read writ| recv send| in out | int csw 3 2 93 2 0 0| 106k 273k| 0 0 | 0.2 0.4 |1039 389 3 6 91 0 0 0| 0 6416k| 276k 275k| 0 0 |2160 6822 missed 55 ticks 4 10 84 2 0 0|1200k 1992k| 82k 93k| 0 0 |1188 6275 missed 29 ticks 1 0 99 0 0 0| 0 1312k| 65k 66k| 0 0 |1050 1114 missed 38 ticks 2 1 96 0 0 0| 0 1168k| 57k 59k| 0 0 | 491 877 missed 13 ticks 3 1 94 1 0 0| 0 6016k| 181k 176k| 0 0 |2169 5996 missed 50 ticks 4 2 91 1 0 0| 28k 8744k| 216k 214k| 0 0 |2159 5438 missed 37 ticks 1 1 98 0 0 0| 0 2632k| 93k 91k| 0 0 | 983 1381 missed 34 ticks 1 1 98 1 0 0| 0 5624k| 113k 110k| 0 0 |1569 2643 missed 52 ticks 1 1 98 1 0 0| 0 2432k| 29k 28k| 0 0 | 679 647 missed 12 ticks 0 0 100 0 0 0| 0 0 | 60B 374B| 0 0 | 13 15 2 3 94 0 0 0| 0 1872k| 209k 210k| 0 0 |1375 3590 missed 30 ticks The problem is currently occuring, but it doesn't seem to be affecting voice quality for now, so I have some time to try to find the cause. The only solution I've found up to now is to reboot... But hey, this isn't a Windows 98 machine :)! I tried restarting the VZ system, which restarts all the VMs, but it didn't solve the problem. I can't tell if the problem occurs on a stock centos kernel, because the server is running production (but non-critical) virtual machines, so it is always running the openVZ kernel. So here is what I've done for now: - Top shows a load of about 0.4 - vmstat 1 10 shows this: procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 592 191092 381720 537956 0 0 53 68 4 3 3 2 93 2 0 0 592 190720 381720 537956 0 0 0 0 32 60 1 1 98 0 0 0 592 191092 381720 537956 0 0 0 0 41 59 0 0 100 0 1 0 592 191092 381728 537948 0 0 0 2584 311 96 10 4 66 19 0 0 592 189968 381732 537944 0 0 0 2080 222 174 2 3 79 16 0 1 592 189968 381732 537944 0 0 0 3244 170 73 10 4 73 12 0 0 592 190216 381732 537944 0 0 0 136 76 113 1 2 93 4 0 0 592 189844 381732 537944 0 0 0 0 33 69 1 1 98 0 0 0 592 189844 381732 537944 0 0 0 0 24 32 0 0 100 0 0 0 592 190340 381732 537944 0 0 0 0 28 42 0 0 100 0 iostat -x 1 (excerpt) Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 171.00 0.00 124.00 0.00 2368.00 0.00 1184.00 19.10 0.14 1.13 0.02 0.20 sdb 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdc 0.00 171.00 0.00 124.00 0.00 2368.00 0.00 1184.00 19.10 0.17 1.35 0.02 0.30 sdd 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md1 0.00 0.00 0.00 294.00 0.00 2352.00 0.00 1176.00 8.00 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-2 0.00 0.00 0.00 294.00 0.00 2352.00 0.00 1176.00 8.00 0.30 1.01 0.02 0.50 dm-3 0.00 0.00 0.00 294.00 0.00 2352.00 0.00 1176.00 8.00 0.30 1.01 0.02 0.50 dm-4 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-5 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-6 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Any insight would be greatly appreciated. It is not critical, but I'd be glad to be able to finally pinpoint and solve the problem. Hardware: HP Netserver, software raid, SCSI disks, 1.7 GB RAM. I can provide more information if needed. Thanks, Ugo

5 10

HP L7780 support in hplip 1.6.7???
by Camron W. Fox 24 May '09

24 May '09

Alle, I have an HP L7780 MFP, which is supported under hplip 1.7.2 but not the current install of 1.6.7. Does anyone know of a way just to add that particular driver to 1.6.7, or will it require removing the standard 1.6.7 and doing a custom install of 1.7.2. If the latter, what would you consider the dangers/other implications of going "rogue"? Best Regards, Camron -- Camron W. Fox Hilo Office High Performance Computing Group Fujitsu Management Services of America, Inc. E-mail: cwfox(a)us.fujitsu.com Phone: (808) 934-4102 Cell: (808) 937-5026

3 2

cd to folder with spaces - in a script
by Michael Casey 24 May '09

24 May '09

How can I cd into a dir, when it contains spaces, and I need to use it in a script? the directory: /home/user/this is a folder/something normally I would use: cd /home/user/this\ is\ a\ folder/something/ but in a script I cant just add the "\" like: find . -type d | while read FOLDER; do cd $FOLDER; done $ No such file or directory the problem is, that there would be more "special chars" then spaces, "sed" them all? :D Thank you

3 4

Where can I get the source package of the RPM alsa-driver-1.0.20-78.el5.i386.rpm
by jasonwen 24 May '09

24 May '09

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss