Discuss

discuss@lists.centos.org

34758 discussions

beta 5 software RAID install
by Jerry Geis 11 Apr '07

11 Apr '07

Hi all, I just installed the beta 5 with 2 disks for RAID. Under centos 4 I always had to issue manual grub commands to have the RAID array boot the first time. Just letting everyone know this is FINALLY fixed in beta 5. Patiently waiting for the final 5... :) (You guys are doing a fine job!) Have a great day all! Jerry

1 0

Dependency problem - libijs.so
by Chuck McParland 11 Apr '07

11 Apr '07

Not sure this one got through.....new to mail list. New to CentOS...very impressed with what I see so far. Have loaded trixbox/CentOS server successfully and am trying to retrofit X server and GNOME progs. Have run into same issue as discussed in this thread. Followed through to last message. But, lacking enough experience w/yum, didn't quite get the punch line. Is there a work around? Can I manually load it from some rpm and bypass this dependency? There's another thread on this issue; but it has taken a different tack and not been, as far as I can see, resolved. Thanks, Chuck McP >ARGHH!!!!! >Jim Perrin wrote: >> On 3/12/07, Robert Moskowitz <rgm at htt-consult.com <http://lists.centos.org/mailman/listinfo/centos>> wrote: >>> Here is what I am seeing: >>> --> Populating transaction set with selected packages. Please wait. >>> ---> Package evolution-data-server.i386 0:1.0.2-13.el4 set to be updated >>> ---> Package php.i386 0:4.3.11-2.8 set to be updated ........ >> Since we're not the vendor here, I'd recommend talking to whoever you >> got your software from. >I had put the Trixbox repo in to grap spandsp, and forgot to take it out >afterwards..... >ARGH. >Sorry all.

1 0

2.6 memory management question
by tblader 11 Apr '07

11 Apr '07

Hello all. I have a centos 4.4 box (2.6.9-42.0.10.ELsmp) with 7gig of ram that doesn't seem to be using swap (also 7gig now). I say "seem" because I've noticed ram utilization run around 95% (with oracle and friends running) and then firing up a couple apps to use that last 5% will stop the machine dead in it's tracks. I ran across some reading[0] about /proc/sys/vm/swappiness and how it affects the kernels decisions when dealing with swap, but it's not all that clear to me whether this is the source of the problem. It seems like the kernel just isn't using swap at all. I've double checked my swap partition in fstab, ran mkswap again, double checked it's availability with vmstat -s but still it's just not getting used. Sunday, the box died around 3am and sar seems to show memory use on the rise right up till it hurled[1] (I just stuck another gig in the box monday, so sar only shows 6gig on sunday) Anyone know whats up with this? PS: swap is an LVM partition. Thanks Thomas [0] - http://lwn.net/Articles/83588/ [1] - sar -A 12:00:01 AM kbmemfree kbmemused %memused kbbuffers kbcached kbswpfree kbswpused %swpused kbswpcad ... 02:40:01 AM 197656 5909384 96.76 203308 4066344 16383992 0 0.00 0 02:50:01 AM 191728 5915312 96.86 203320 4066400 16383992 0 0.00 0 03:00:01 AM 185584 5921456 96.96 203336 4067132 16383992 0 0.00 0 03:10:01 AM 185712 5921328 96.96 203344 4067872 16383992 0 0.00 0 Average: 191895 5915145 96.86 203221 4063819 16383992 0 0.00 0 12:00:01 AM pswpin/s pswpout/s ... 02:00:01 AM 0.00 0.00 02:10:01 AM 0.00 0.00 02:20:01 AM 0.00 0.00 02:30:01 AM 0.00 0.00 02:40:01 AM 0.00 0.00 02:50:01 AM 0.00 0.00 03:00:01 AM 0.00 0.00 03:10:01 AM 0.00 0.00 Average: 0.00 0.00 -- Flambeau Inc. Technology Center - Baraboo, WI Email : tblader(a)flambeau.com Keyserver: http://pgp.mit.edu KeyID: 0x00E9EC2C

7 12

How should I create a repo on Centos 2.1?
by John Summerfield 11 Apr '07

11 Apr '07

I tracked down a createrepo rpm "for RHL 7.x, AS 2.1" etc (hosted by Dag), but it's uninstallable. Eventually I managed to create an rpm from the source (actually, that's fairly easy when onw knows to say "python2"), but python-urlgrabber has completely defeated me. According to Dag, the problem is that "upstream" doesn't see the need to support RHAS2.1/Centos2.1/RHL7.x amd such. While I can, if forced, solve the problem by a personal visit to the site or by creating a repo on the other side of the Internet, there should be a better general solution. What is it? -- Cheers John -- spambait 1aaaaaaa(a)coco.merseine.nu Z1aaaaaaa(a)coco.merseine.nu Please do not reply off-list

2 2

Re: [CentOS] NVidia Quadro4 200/400 NVS CentoOS 4.4
by Rodrigo Barbosa 10 Apr '07

10 Apr '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Tue, Apr 10, 2007 at 01:59:58PM -0400, Michael Velez wrote: > > > I've never used Atrpms. I can't comment. > > Not a problem. From what I gather, it's questionable > > anyway. I've done a little more poking around the Repo page > > on the Wiki, and I've just added CentOS Plus, kbsExtras, and > > kbsMisc. Anyone have thoughts on those? > > > > I wouldn't put CentOS Plus as a repo. I did that to get PHP5 and had a lot > of depencency errors when running yum. I second that. I mostly use kbs* (Karan's) and rpmforge (Dag's), which are fairly trustworthy. However, to avoid mistakes, I keep then disabled by default, and only enable as needed. []s - -- Rodrigo Barbosa "Quid quid Latine dictum sit, altum viditur" "Be excellent to each other ..." - Bill & Ted (Wyld Stallyns) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) iD4DBQFGG9I8pdyWzQ5b5ckRAiNCAKCxPdo1eOOawicUUHYWZO/c+m0+sgCY/FcG y/7x7wxY2Su0rsn/P4feAA== =bLfG -----END PGP SIGNATURE-----

1 0

From LiveCD, mount hda1 gives resource busy
by Neil Aggarwal 10 Apr '07

10 Apr '07

Hello: I booted from the CentOS 4.4 CD. I am trying to mount the partitions on the hard drive of the physical machine (Fedora Core). I did: mkdir /mnt/hda1 chmod 755 /mnt/hda1 mount /dev/hda1 /mnt/hda1 I get back: mount: /dev/hda1 already mounted or /mnt/hda1 busy I checked with df. I don't see hda1 anywhere. Any ideas what is wrong? Thanks, Neil -- Neil Aggarwal, (214)986-3533, www.JAMMConsulting.com FREE! Eliminate junk email and reclaim your inbox. Visit http://www.spammilter.com for details.

2 2

UPS question
by Ashley M. Kirchner 10 Apr '07

10 Apr '07

Hello folks, I'm about to install Centos on a new server and this will be my first "exposure" if you will to Centos. I come from an RH/Fedora background. Anyway, is there a list somewhere that will tell me what UPS batteries are compatible with Centos 4 (brand/model)? I figured before I go out and buy something I better check to see what's supported. Thanks. -- A -- W | It's not a bug - it's an undocumented feature. +-------------------------------------------------------------------- Ashley M. Kirchner <mailto:ashley@pcraft.com> . 303.442.6410 x130 IT Director / SysAdmin / Websmith . 800.441.3873 x130 Photo Craft Imaging . 3550 Arapahoe Ave. #6 http://www.pcraft.com ..... . . . Boulder, CO 80303, U.S.A.

3 2

3ware cards and new firmware in 9.4.1 codeset
by Scott Silva 10 Apr '07

10 Apr '07

I just saw the following in the release notes for the new firmware for the later 3ware cards; Improved CIFS performance The firmware has been tuned to greatly increase performance with CIFS (Common Internet File System) protocol. However, this has resulted in performance with the Linux ext3 file system that is slower than earlier releases. We recommend that you use other Linux file systems, such as XFS. So it looks like ext3 performance would be worse. What are they thinking? They are going to drive linux people away. -- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don't!!!!

10 16

CentOS 4 - prevent X from installing?
by tony＠softins.clara.co.uk 10 Apr '07

10 Apr '07

So, I've just gone through a enw CentOS 4.4 install. I selected the "Custom" installation type, and then in the part for selecting which packages to install, I specifically did NOT select X, Gnome or KDE, nor any of the graphical tools. However, when it finished installing and rebooted, I still ended up with X installed, a graphical login screen and default run level of 5. Does anyone know which default packages might have caused X Windows to have been dragged in? I'll do some digging, but I had an idea this might be a common problem. Cheers Tony -- Tony Mountifield Work: tony(a)softins.co.uk - http://www.softins.co.uk Play: tony(a)mountifield.org - http://tony.mountifield.org

2 1

postgres 7 - CentOS 4.4
by Tom Brown 10 Apr '07

10 Apr '07

Hi Firstly apologies but i have to install an app that uses postgres but i am more a MySQL/Oracle guy so i maybe doing something really wrong here.. I am following instructions for creating a DB user and encountering this # createuser -ADP -U postgres foo Enter password for new user: Enter it again: createuser: could not connect to database template1: FATAL: IDENT authentication failed for user "postgres" In a standard postgres install whats causing this? I presume its because the user postgres has a pwd but what is this and why am i not being prompted to enter this? Thanks and apologies as i know this is not directly a CentOS problem

3 5

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss