Discuss

discuss@lists.centos.org

34753 discussions

RE: [CentOS] OT: Problems... Resolved
by Bisbal, Prentice 20 Oct '06

20 Oct '06

It happens to all of us. -- Prentice -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Andy Wright Sent: Friday, October 20, 2006 11:54 AM To: CentOS mailing list Subject: Re: [CentOS] OT: Problems... Resolved Oh dear, I feel I should hang my head in shame ! I blame it all on lack of coffee... Many thanks to all that took the trouble to reply to what turned out to be my own self-inflicted problem.... It turns out that I had upgraded one of the servers to PHP5 to do some testing and had left it that way rather than reverting to the stock Centos PHP4. That, coupled with a rather outdated install of Horde was causing the problem. Back on PHP4 now and all is ok. Thanks again to all, Andy. _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos The contents of this communication, including any attachments, may be confidential, privileged or otherwise protected from disclosure. They are intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient, please do not read, copy, use or disclose the contents of this communication. Please notify the sender immediately and delete the communication in its entirety.

1 0

CentOS-announce Digest, Vol 20, Issue 8
by centos-announce-request＠centos.org 20 Oct '06

20 Oct '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0710 Important CentOS 3 i386 kernel - security update (Tru Huynh) 2. CESA-2006:0710 Important CentOS 3 x86_64 kernel - security update (Tru Huynh) 3. CESA-2006:0710 Important CentOS 3 s390(x) kernel - security update (Pasi Pirhonen) 4. CESA-2006:0720 Critical CentOS 4 i386 kdelibs - security update (Johnny Hughes) 5. CESA-2006:0720 Critical CentOS 4 x86_64 kdelibs - security update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 19 Oct 2006 19:14:26 +0200 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2006:0710 Important CentOS 3 i386 kernel - security update To: centos-announce(a)centos.org Message-ID: <20061019171426.GA15998(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2006:0710 kernel security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2006-0710.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/kernel-2.4.21-47.0.1.EL.i586.rpm updates/i386/RPMS/kernel-2.4.21-47.0.1.EL.i686.rpm updates/i386/RPMS/kernel-BOOT-2.4.21-47.0.1.EL.i386.rpm updates/i386/RPMS/kernel-doc-2.4.21-47.0.1.EL.i386.rpm updates/i386/RPMS/kernel-hugemem-2.4.21-47.0.1.EL.i686.rpm updates/i386/RPMS/kernel-hugemem-unsupported-2.4.21-47.0.1.EL.i686.rpm updates/i386/RPMS/kernel-smp-2.4.21-47.0.1.EL.i686.rpm updates/i386/RPMS/kernel-smp-unsupported-2.4.21-47.0.1.EL.i686.rpm updates/i386/RPMS/kernel-source-2.4.21-47.0.1.EL.i386.rpm updates/i386/RPMS/kernel-unsupported-2.4.21-47.0.1.EL.i586.rpm updates/i386/RPMS/kernel-unsupported-2.4.21-47.0.1.EL.i686.rpm updates/i386/RPMS/kernel-2.4.21-47.0.1.EL.athlon.rpm updates/i386/RPMS/kernel-smp-2.4.21-47.0.1.EL.athlon.rpm updates/i386/RPMS/kernel-smp-unsupported-2.4.21-47.0.1.EL.athlon.rpm updates/i386/RPMS/kernel-unsupported-2.4.21-47.0.1.EL.athlon.rpm source: updates/SRPMS/kernel-2.4.21-47.0.1.EL.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update kernel\* Tru -- Tru Huynh (CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

RE: [CentOS] RE: OT: Problems with Pound Signs and Apache
by Bisbal, Prentice 20 Oct '06

20 Oct '06

Are you sure ALL the files are 100% the same, including executables and libraries? I would do an md5sum of EVERY file that might be even remotely related to the behavior of Apache, Horde and anything else and then compare the MD5sums of all the files on the two different systems. If that doesn't turn up anything, then do rpm -qa and make sure all the packages are at the same version. The problem can still be in a library used by Horde or apache that's further down the stack (we all know what problems changing libc can cause, don't we? ) If THAT doesn't turn up anything, do rpm -Va to verify all the packages on the two systems. -- Prentice -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Andy Wright Sent: Friday, October 20, 2006 9:44 AM To: CentOS mailing list Subject: Re: [CentOS] RE: OT: Problems with Pound Signs and Apache Rex Dieter wrote: > We had similar problems, and our best solution was to remove the > "AddDefaultCharset" config option altogether. This allows individual > pages to specify their own encoding using meta tags: > <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> > and browsers to properly auto detect charsets on pages that fail to > explicity set them. > > -- Rex > http://lists.centos.org/mailman/listinfo/centos > again no luck unfortunately. The strange thing is that both Apaches are configured the same so I would expect the same problem with both. This not being the case, I'm thinking the problem is not with Apache but with Horde or elsewhere. However Horde was copied from one server to another (it's actually the original install that's giving the problem so that rules out an error when copying across). Thanks, Andy. _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos The contents of this communication, including any attachments, may be confidential, privileged or otherwise protected from disclosure. They are intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient, please do not read, copy, use or disclose the contents of this communication. Please notify the sender immediately and delete the communication in its entirety.

1 0

OT: Problems with Pound Signs and Apache
by Andy Wright 20 Oct '06

20 Oct '06

Hi list, I have 2 Centos 4 servers running the Horde system, apparently identical in configuration, but they are behaving differently... On one, when emails containing a Pound Sign (£) are displayed it shows as Â£ (not sure if this will come through right, but it's a capital A with a 'hat' accent over it followed by the pound sign). On the other, the Pound sign displays correctly. I have copied the httpd.conf files over between servers and this has no effect. Looking at the page source both are en-gb and UTF8. It looks like the problem is not with Apache as the config files are identical. Both servers are running the same version of Apache, and for that matter the same version of everything else, and all updates are applied. Would anyone have any ideas where to start looking to track down this discrepancy? Thanks! Andy.

6 10

HP Surestore 12000e and multi-LUN
by Paul M. Wright, jr. 20 Oct '06

20 Oct '06

I am running CentOS 4.4 and trying to bring up my tape library. When I do cat /proc/scsi/scsi, it shows only the drive and not the changer although both are shown when the Adaptec card initializes. I recall in the distant past that I had to do "something" to get the kernel to properly scan the SCSI bus for the additional LUN but I cannot for the life of me recall what that was. It would have also been a much earlier kernel. Can anyone here help me out? Regards, paul

2 1

Proper partition/LVM growth after RAID migration
by Christian Wahlgren 20 Oct '06

20 Oct '06

Hi This topic is perhaps not for this list, but it I'm running on a CentOS 4.4 and it seems that a lot of people here uses 3Ware and RAID volumes. I did a RAID migration on a 3Ware 9590SE-12, so that an exported disk grew from 700GB to 1400GB. The exported disk is managed by LVM. The problem now is that I don't really know what to do now to let LVM and my locigal volume to make use of this new disk size, and probably future disk size growth. I initially imagined that I could let the physical partition grow and then the LVM PV, the LV and the FS (ext3) to grow to fill up the new exported disk size. Then I realized that this is not how LVM is designed - you add PVs and let the LV and FS to grow. But, what if the underlying exported disk from a RAID card is growing as you add disks to it's RAID volume? Should you create new physical partitions on the exported disk, and specifically, extended partitions, since you might in the future add more than 4 partitions? Secondly, it seems there is a problem after this migration: The graphical LVM shows that I have an "Unpartitioned space" on the exported disk, but I can't click on "Initialize entry" button. The property window on the right says: "Not initializable: Partition manually". parted shows only one partition: [root@acrux ~]# parted /dev/sdb print Disk geometry for /dev/sdb: 0.000-1430490.000 megabytes Disk label type: msdos Minor Start End Type Filesystem Flags 1 0.000 715245.000 primary lvm fdisk in expert mode (x) shows that partition 2-4 fields are all zeros. Should I now make a lvm partition in an extended partition in parted, and then hopefully, the graphical LVM will be able to add the new physical partition to my logical volume, and then resize my fs (ext3)? Thanks in advance for any input on this, Christian

8 11

HP (compaq) RAID - How to get alerts?
by Daryl 20 Oct '06

20 Oct '06

Hi All, Background: I have HP RAID setups (Smart Array 5, shows up as /dev/cciss/c0d0) on my DL380s, and they run great with CentOS. I have had a drive failure (HDD lights up amber), so I pulled the HDD, replaced it and the RAID controller rebuilt the array in a jiffy - no probs. My question: I cant find anything in the logs to alert me that a drive failed - this makes sense since the RAID is hardware, so i presume i need some management software however i cant find anything on HP or Compaq's sites to tell me what software i need to be running. I imaging it is something like cpq_alert or such. | Does anyone on the list run HP or Compaq hotswapable kit? How do you get alerted to failures? Thanks, MrKiwi

5 4

Switch to Nvidia from ATI
by BRUCE STANLEY 19 Oct '06

19 Oct '06

I am having some issues (e.g. System lock ups) with my ATI 9250 Video card. I am thinging about replacing it with either a Nvidia FX5200, FX5500, or a FX5600 card. Is anyone using one of these cards on Centos 4.1 with the stock (XORG) nv driver?

8 11

Message: 31
by Lance Davis 19 Oct '06

19 Oct '06

On Thu, 19 Oct 2006, Rajeev R Veedu wrote: > I have a Cyrus installation with postfix and openXchange. I get the mails > from catchall account with procmail and distribute with the mail server. Now > I have a new site office where couples of staff members are going to be > relocated. > > Since we have only an ADSL line on site office if there any way I could > forward the mails for these staff members to another Mail Server with > dynamic IP address? The problem using things like dyndns and forwarding to a dynamic ip is that there is a possibility that when your ip has changed mail would be attempted to be delivered to the next user that gets your previous ip. Even with v. low dns timeouts there is still that risk. Better to get a static ip, or failing that use a pull system like fetchmail. Regards Lance -- Re: [CentOS] Mail forwarding on a dynamic IP address From: brent(a)regrafix.com To: centos(a)centos.org User-Agent: SquirrelMail/1.4.8 MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) Importance: Normal > ------------------------------ > > Message: 35 > Date: Thu, 19 Oct 2006 17:17:26 +0200 > From: Andreas Micklei <andreas.micklei(a)ivistar.de> > Subject: Re: [CentOS] Mail forwarding on a dynamic IP address. > To: CentOS mailing list <centos(a)centos.org> > Message-ID: <200610191717.26795.andreas.micklei(a)ivistar.de> > Content-Type: text/plain; charset="iso-8859-15" > > Am Donnerstag, 19. Oktober 2006 16:53 schrieb Brian Mathis: >> fetchmail is the way to go on this. It's one of the things it's >> designed > > Btw.: When considering fetchmail, also take a look at getmail. > > Your best best is to use qmailrocks installation it works great and includes smtp routes. Use your isp's smtp server to relay everything. I am using it on this server to send you this. There is even a way to set it up with smtpauth Also I don't have a problem with a dynamic ip since I have a client installed there is a couple of places that seem to do a better job then others. I used dnsexit because it is free so far no complaints.

1 0

Gnome bluetooth support
by Robert Moskowitz 19 Oct '06

19 Oct '06

Anyone familiar with: http://usefulinc.com/software/gnome-bluetooth/ And will it work with Centos' version of Gnome?

2 2

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss