Discuss

discuss@lists.centos.org

5 participants
34752 discussions

US Federal Government to require MSIE for copyright preregistration
by Phil Schaffner 05 Aug '05

05 Aug '05

The following OT thread from fedora-list may be of some interest to this list also. https://www.redhat.com/archives/fedora-list/2005-August/msg00730.html https://www.redhat.com/archives/fedora-list/2005-August/msg00801.html Phil

1 0

Definitely recommend upgrades on Tyan S2895 ...
by Bryan J. Smith 05 Aug '05

05 Aug '05

It seems that unstable PowerNow support on the Tyan S2895 is not limited to Linux according to this review: http://www.hardcoreware.net/reviews/review-296-1.htm Their solution was to upgrade the BIOS as well. -- Bryan J. Smith b.j.smith(a)ieee.org http://thebs413.blogspot.com ---------------------------------------------------------------------- The best things in life are NOT free - which is why life is easiest if you save all the bills until you can share them with the perfect woman

1 0

Several kernel problems
by Deim Ágoston 04 Aug '05

04 Aug '05

hi all, I have to configure an Intel desktop motherboard based "server" with 4 disks, using linux software raid (2 raid1 arrays). The type of motherboard is Intel Desktop Board D925XEBC2 "BlackCanyon". The gigabit ethernet controller is Marvell Yukon based (Syskonnekt) and stock kernel has problems using it. It doesn't complain, lspci "sees" it (it's not a big thing at all) but nothing under /proc/net/sk98lin/ (there should be an eth0 at least). I upgraded the stcok kernel to the newer one, 2.6.9-11 EL kernel but it doesn't work too. I tried to compile it as a module and to compile the driver into the kernel. After I downloaded the tar.gz and newest driver from marvell.com and compiled it against the official EL kernel source it worked... for 2 seconds. After that I got a kernel panic. I downloaded the latest vanilla kernel, version 2.6.12.3, compiled it with the patched driver. Right now the kernel sees the ethernet card but there are three problems: - this kernel is not the overpatched, stress tested kernel source (lots of applications and 3rd party drivers require RH kernels) but I can live with it - the boot is terribly sloooooooow. at startup when udev starts the boot process hangs for a while. That should be the version mismatch between kernel version (2.6.12.3) and udev (latest is 0.60, CentOS/RHEL includes 0.39). As far as I've seen the changelogs and lkml archives an udev upgrade should help. But I don't want to replace everything. - it seems that the system constantly uses the disks! The HDD activity LED full time active. If I boot the stock kernel it doesn't do so this was after the upgrade. anybody seen such thing before? (Maybe that's udev related too but I don't think so). It seems that there's no constant writes but it's strange. I used dstat to get this result maybe there's a better option. Any comments appriciated. bye, Ago

1 0

Question driving external LCD from dell laptop
by Jerry Geis 04 Aug '05

04 Aug '05

Bryan, I have the Nvidia chipset. Geforce2 go. Under XP I see a selection for "Nview display mode" and I select to try to find something that will show me refresh rates, scan rates etc... but I dont see where that is. Can you be more specific about how to view that information so I attempt to duplicate that under X and CentOS. THanks, Jerry ------------ Jerry Geis <geisj at pagestation.com <http://lists.centos.org/mailman/listinfo/centos>> wrote: >/ I have a dell inspiron 8200 laptop running centos 4.1 just />/ fine. I want to connect it to an external 32 inch LCD. />/ This laptop is dual boot windows. I set windows up to />/ 1024x768 and connected the LCD - it worked just />/ fine. LCD max is 1333x768 />/ I then booted Centos 4.1 and set X to be 1024x768 also. />/ rebooted the laptop just ot make sure. />/ I then connected the LCD and it says can't display it... />/ Any ideas on how I might get the LCD to display CentOS X? / Depends on the GPU chipset. If it's an nVidia Go Mobile, you can use the nView features of the Standardware (Open Standard, Proprietary Source) drivers. It will let you set the _exact_ scan ranges of your 32" LCD TV (I assume it's a LCD TV, given the size/scan range), as well as the geometry for the 2nd head. If it's an Intel i855G/915G, then I've had a real hissy fit with mine. I can't seem to get the i855G/915G to do anything under Linux except send the _exact_same_ scan rate as it's using for the LCD. E.g., on my Toshiba Satelitte M35 series, it sends the _exact_same_ scan rate out the miniDB15 as it uses for the LCD. I have _never_ seen that with any other notebook I've ever used with a non-i8xx/9xx GPU (they always send VESA-standard output signals). So unless I don't know about some Intel tools out there for Linux, I hate'em. ;-> Never tried ATI Radeon Mobility.

3 3

CentOS-announce Digest, Vol 6, Issue 2
by centos-announce-request＠centos.org 04 Aug '05

04 Aug '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:595 Moderate CentOS 3 i386 SquirrelMail - security update (Tru Huynh) 2. CESA-2005:595 Moderate CentOS 3 x86_64 SquirrelMail - security update (Tru Huynh) 3. CESA-2005:595 Moderate CentOS 4 i386 SquirrelMail- security update (Johnny Hughes) 4. CESA-2005:595 Moderate CentOS 4 x86_64 SquirrelMail- security (Johnny Hughes) 5. CESA-2005:595 Moderate CentOS 4 ia64 SquirrelMail - security update (Pasi Pirhonen) 6. CESA-2005:595 Moderate CentOS 4 s390(x) SquirrelMail - security update (Pasi Pirhonen) 7. CESA-2005:595 Moderate CentOS 3 s390(x) SquirrelMail - security update (Pasi Pirhonen) 8. CESA-2005:595 Moderate CentOS 3 ia64 SquirrelMail - security update (Pasi Pirhonen) 9. CESA-2005:583-01: Low CentOS 2 i386 dump security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Wed, 3 Aug 2005 18:04:15 +0200 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2005:595 Moderate CentOS 3 i386 SquirrelMail - security update To: centos-announce(a)centos.org Message-ID: <20050803160415.GA31614(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2005:595 SquirrelMail security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2005-595.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/squirrelmail-1.4.3a-10.EL3.centos.1.noarch.rpm source: updates/SRPMS/squirrelmail-1.4.3a-10.EL3.centos.1.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update squirrelMail Tru -- Tru Huynh (CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

RE: [CentOS] Qube2
by Tom DE BLENDE (GCC) 04 Aug '05

04 Aug '05

Thomas, Anything special I need to pay attention to before doing it? You know of a How To posted anywhere? Tom -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Joebstl Thomas Sent: woensdag 3 augustus 2005 13:41 To: CentOS mailing list Subject: Re: [CentOS] Qube2 I dont see a MIPS Port mentioned anywhere, so I guess you're out of luck. I'm running Debian on mine. Regards, Thomas Tom DE BLENDE (GCC) schrieb: >Hi, > >I was just wondering whether someone has any experience installing >Cent0S on a Qube2. > >Kind regards, >Tom >_______________________________________________ >CentOS mailing list >CentOS(a)centos.org >http://lists.centos.org/mailman/listinfo/centos > > > > _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

Conflict between mouse and tablet
by Dave Gutteridge 04 Aug '05

04 Aug '05

I've been working hard to get my Wacom tablet to work as my primary pointing device. I've installed the drivers and followed the instructions at the Linux Wacom project at Sourceforge. And I've been largely successful. The drivers are working, the configuration utilities are working. I'm just one step away from success. Apparently the problem is that my mouse and my USB tablet are fighting with each other for control of input to the pointer. A guy from the Linux Wacom mailing list (I can't believe I'm on a mailing list for how to get a pointing device to work) told me that I need to edit xorg.conf so that my mouse device option points to "mouse1" and not "mice". And he referred me to the following page of explanation. http://linuxwacom.sourceforge.net/index.php/howto/mouse1 The guys who work to make the Wacom driver happen on Linux are good guys who have put in a lot of hard work to make their driver as well documented as possible. But it's a case of information overload and cryptic technobabble. They're talking way over my head. Anyway, following the gist of their advice, I edited my xorg.conf file where it says: "Option "Device" "/dev/input/mice" ... to: Option "Device" "/dev/input/mouse1" ... but there was no change. ... and the guys on the Linux Wacom list take a long time to respond, if at all. So, can someone here advise on what setting in xorg.conf will get my mouse input out of the way and let my tablet do it's job? I also tried removing the whole section for the mouse specifications, thinking that if it wasn't there, it couldn't obstruct my tablet. But that caused X windows to crash. Here is my current xorg.conf: # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "stylus" "SendCoreEvents" InputDevice "cursor" "SendCoreEvents" InputDevice "eraser" "SendCoreEvents" EndSection Section "Files" # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" Load "dri" EndSection Section "InputDevice" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # Or if you just want both to be control, use: # Option "XkbOptions" "ctrl:nocaps" # Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mouse1" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "yes" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Dell P1110" DisplaySize 400 300 HorizSync 30.0 - 121.0 VertRefresh 48.0 - 160.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "nv" VendorName "Videocard vendor" BoardName "RIVA TNT2" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "InputDevice" Driver "wacom" Identifier "cursor" Option "Device" "/dev/input/event2" Option "Type" "cursor" Option "Mode" "Relative" Option "USB" "on" EndSection Section "InputDevice" Driver "wacom" Identifier "stylus" Option "Device" "/dev/input/event2" Option "Type" "stylus" Option "USB" "on" EndSection Section "InputDevice" Driver "wacom" Identifier "eraser" Option "Device" "/dev/input/event2" Option "Type" "eraser" Option "USB" "on" EndSection Section "DRI" Group 0 Mode 0666 EndSection

5 8

How to query the package owning the file? (no packahe manger installed)
by Prasad Pillarisetti 04 Aug '05

04 Aug '05

Guys recently I had this question asked in a technical interview. How do I find out the package owning a particular file, when no package managers are installed? I am assuimg SRPMs are used to install the software? Is this actually possible? Install the Linux OS without a package manager? I know "rpm -qf filename" gives the package owning the file. But how to get the package name when I don't have any package manager? Maybe this was a question to rattle me? -- Prasad Pillarisetti "If everything is coming your way, then you are in the wrong lane"

11 16

RE: [CentOS] What do I need to do in order to dial into my server?
by Marc Powell 04 Aug '05

04 Aug '05

> -----Original Message----- > From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > Behalf Of Kevin Anderson > Sent: Wednesday, August 03, 2005 1:29 PM > To: CentOS mailing list > Subject: [CentOS] What do I need to do in order to dial into my server? > > I need to setup my server so I can connect to it through it's phone modem. > Is there a howto anyone knows of? I'm not even sure what to look it up > as. While not CentOS specific -- http://www.google.com/search?hl=en&lr=&q=linux+dialin+server&btnG=Search -- Marc

2 1

centos plus kernel
by Hilliard, Jay 04 Aug '05

04 Aug '05

Are the changes in the centosplus kernel limited only to what is enabled the config file? There are some specific (and critical) patches I've had to apply to 2.6.9-11 to make it stable in our environment. Are kernel patches to known problems something that can be considered for CentOS plus? For example, this one was critical to get rid of prio_tree kernel crashes under heavy load: http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.1… -- Jay Hilliard

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss