Anyone can help?
I continue without access from server:
/etc/cron.daily/freshclam:
ERROR: No servers could be reached. Giving up
ERROR: No servers could be reached. Giving up
ERROR: No servers could be reached. Giving up
ERROR: No servers could be reached. Giving up
ERROR: No servers could be reached. Giving up
ERROR: No servers could be reached. Giving up
ERROR: Update failed. Your network may be down or none of the mirrors listed in freshclam.conf is working.
/etc/cron.daily/yum.cron:
Error getting file http://mirror.centos.org/centos/3/addons/i386/headers/header.info
[Errno 4] IOError: <urlopen error >
Error getting file http://mirror.centos.org/centos/3/addons/i386/headers/header.info
[Errno 4] IOError: <urlopen error >
when I try use wget or links I receive this message:
Connecting... <- only this
FTP transfer from internet IP address to server not work.
ifcfg-eth0 file:
DEVICE=eth0
BOOTPROTO=static
BROADCAST=200.138.174.255
IPADDR=200.138.174.27
NETMASK=255.255.255.0
NETWORK=200.138.174.0
ONBOOT=yes
TYPE=Ethernet
[root@cedaspy network-scripts]# route
Tabela de Roteamento IP do Kernel
Destino Roteador MascaraGen. Opcoes Metrica Ref Uso Iface
200.138.174.0 * 255.255.255.0 U 0 0 0 eth0
default rt2.voe.com.br 0.0.0.0 UG 0 0 0 eth0
[root@cedaspy network-scripts]# ifconfig
eth0 Encapsulamento do Link: Ethernet Endereco de HW 00:0E:A6:CD:95:AD
inet end.: 200.138.174.27 Bcast:200.138.174.255 Masc:255.255.255.0
UP BROADCASTRUNNING MULTICAST MTU:1500 Metrica:1
RX packets:3451045 errors:0 dropped:0 overruns:0 frame:0
TX packets:1885175 errors:0 dropped:0 overruns:0 carrier:0
colisoes:0 txqueuelen:1000
RX bytes:756511043 (721.4 Mb) TX bytes:937513004 (894.0 Mb)
IRQ:5 Endereco de E/S:0xe800
eth0:0 Encapsulamento do Link: Ethernet Endereco de HW 00:0E:A6:CD:95:AD
inet end.: 200.138.174.30 Bcast:200.138.174.255 Masc:255.255.255.0
UP BROADCASTRUNNING MULTICAST MTU:1500 Metrica:1
RX packets:3451045 errors:0 dropped:0 overruns:0 frame:0
TX packets:1885177 errors:0 dropped:0 overruns:0 carrier:0
colisoes:0 txqueuelen:1000
RX bytes:756511043 (721.4 Mb) TX bytes:937513248 (894.0 Mb)
IRQ:5 Endereco de E/S:0xe800
lo Encapsulamento do Link: Loopback Local
inet end.: 127.0.0.1 Masc:255.0.0.0
UP LOOPBACKRUNNING MTU:16436 Metrica:1
RX packets:523640 errors:0 dropped:0 overruns:0 frame:0
TX packets:523640 errors:0 dropped:0 overruns:0 carrier:0
colisoes:0 txqueuelen:0
RX bytes:247085909 (235.6 Mb) TX bytes:247085909 (235.6 Mb)
[root@cedaspy /]# uname -a
Linux cedaspy.com.br 2.4.21-27.0.2.ELsmp #1 SMP Wed Jan 19 01:53:23 GMT 2005 i686 i686 i386 GNU/Linux
[root@cedaspy /]# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
access for SSH, MySQL, WEB (Apache), Mail - Qmail (Imap, POP3, SMTP) is FINE.
Anyone can help?
Thanks,
Tiago Bahi
I am trying to setup webdav. I have tried hte webdav list. Has
anyone implemetned webdav on apache?
--
My "Foundation" verse:
Isa 54:17 No weapon that is formed against thee shall prosper;
and every tongue that shall rise against thee in judgment thou
shalt condemn. This is the heritage of the servants of the LORD,
and their righteousness is of me, saith the LORD.
-- carpe ductum -- "Grab the tape"
CDTT (Certified Duct Tape Technician)
Linux user #322099
Machines:
206822
256638
276825
http://counter.li.org/
I wanted to upgrade my ClamAV but ./configure gave this error
checking for zlib installation... /usr
configure: error: The installed zlib version may contain a security bug. Please
upgrade to 1.2.2 or later: http://www.zlib.net. You can omit this check with
--disable-zlib-vcheck but DO NOT REPORT any stablility issues then!
but yum gave this message
# yum install zlib
Gathering header information file(s) from server(s)
Server: CentOS-3.3 - Addons
Server: CentOS-3.3 - Base
Server: CentOS-3.3 - Extras
Server: CentOS-3.3 - Updates
Finding updated packages
Downloading needed headers
zlib is installed and is the latest version.
No actions to take
is it safe to install ClamAV with the --disable-zlib-vcheck option ?
--
This message has been scanned for viruses and
dangerous content by OpenProtect(http://www.openprotect.com), and is
believed to be clean.
Hello,
I noticed that since a couple of hours, this following directory on
belnet is empty ...
ftp://ftp.belnet.be/packages/caosity/centos/3.1/updates/i386/RPMS/
can i do something ?
--
Martin
there seem to be very few iso8859-1 (latin-1) fonts. in particular the
lucidatypewriter fonts aren't there for 8859-1. but it does have 8859-2.
just playing with xfontsel i see about 800 8859-1 fonts and 2000 8859-2.
did something get left out? i did an everything install. and further
poking with yum doesn't show any other font packages that could be
installed.
# yum list all fonts\*
Setting up Repos
base 100% |=========================| 1.1 kB 00:00
updates 100% |=========================| 951 B 00:00
contrib 100% |=========================| 951 B 00:00
addons 100% |=========================| 951 B 00:00
extras 100% |=========================| 1.1 kB 00:00
Reading repository metadata in from local files
base : ################################################## 1407/1407
updates : ################################################## 9/9
extras : ################################################## 24/24
Installed Packages
fonts-ISO8859-2.noarch 1.0-13 installed
fonts-ISO8859-2-100dpi.noarch 1.0-13 installed
fonts-ISO8859-2-75dpi.noarch 1.0-13 installed
fonts-KOI8-R.noarch 1.0-7 installed
fonts-KOI8-R-100dpi.noarch 1.0-7 installed
fonts-KOI8-R-75dpi.noarch 1.0-7 installed
fonts-arabic.noarch 1.5-3 installed
fonts-bengali.noarch 0.1-3 installed
fonts-hebrew.noarch 0.100-4 installed
fonts-ja.noarch 8.0-16 installed
fonts-xorg-100dpi.noarch 6.8.1-1 installed
fonts-xorg-75dpi.noarch 6.8.1-1 installed
fonts-xorg-ISO8859-14-100dpi.noarch 6.8.1-1 installed
fonts-xorg-ISO8859-14-75dpi.noarch 6.8.1-1 installed
fonts-xorg-ISO8859-15-100dpi.noarch 6.8.1-1 installed
fonts-xorg-ISO8859-15-75dpi.noarch 6.8.1-1 installed
fonts-xorg-ISO8859-2-100dpi.noarch 6.8.1-1 installed
fonts-xorg-ISO8859-2-75dpi.noarch 6.8.1-1 installed
fonts-xorg-ISO8859-9-100dpi.noarch 6.8.1-1 installed
fonts-xorg-ISO8859-9-75dpi.noarch 6.8.1-1 installed
fonts-xorg-base.noarch 6.8.1-1 installed
fonts-xorg-cyrillic.noarch 6.8.1-1 installed
fonts-xorg-syriac.noarch 6.8.1-1 installed
fonts-xorg-truetype.noarch 6.8.1-1 installed
I have a Zope + DCOracle2 setup, and I was thinking of moving to Zope +
eGenix ODBC (which will use unixODBC) however that still leaves me
lacking a driver to connect this to the Oracle server.
There are a number of variously priced commercial drivers out there like
EasySoft, Merant, OpenLink, etc.
Someone built upon a previous open source EasySoft driver:
http://fndapl.fnal.gov/~dbox/oracle/odbc/
Anyone have any suggestions/experience?
-Mike