Amigos:
Necesito ayuda, un servidor se me apaga, con el mensaje shutting down for
system halt y luego al arrancalo muestra el sig. log:
kernel: Linux version 2.6.18-348.1.1.el5 (mockbuild(a)builder10.centos.org)
(gcc version 4.1.2 20080704 (Red Hat 4.1.2-54)) #1 SMP Tue Jan 22 16:19:19
EST 2013
kernel: Command line: ro root=/dev/md2
kernel: BIOS-provided physical RAM map:
kernel: BIOS-e820: 0000000000010000 - 0000000000093800 (usable)
kernel: BIOS-e820: 0000000000093800 - 0000000000093c00 (reserved)
kernel: BIOS-e820: 0000000000098000 - 00000000000a0000 (reserved)
kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
kernel: BIOS-e820: 0000000000100000 - 000000007d7d4000 (usable)
kernel: BIOS-e820: 000000007d7d4000 - 000000007d7de000 (ACPI data)
kernel: BIOS-e820: 000000007d7de000 - 000000007d7df000 (usable)
kernel: BIOS-e820: 000000007d7df000 - 0000000080000000 (reserved)
kernel: BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
kernel: BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved)
kernel: BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
kernel: DMI 2.7 present.
kernel: No NUMA configuration found
kernel: Faking a node at 0000000000000000-000000007d7df000
kernel: Bootmem setup node 0 0000000000000000-000000007d7df000
kernel: Memory for crash kernel (0x0 to 0x0) notwithin permissible range
kernel: disabling kdump
kernel: ACPI: PM-Timer IO Port: 0x908
kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
kernel: Processor #0 7:10 APIC version 21
kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
kernel: Processor #2 7:10 APIC version 21
kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
kernel: Processor #4 7:10 APIC version 21
kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
kernel: Processor #6 7:10 APIC version 21
kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
last message repeated 59 times
kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
kernel: Setting APIC routing to physical flat
kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
kernel: Using ACPI (MADT) for SMP configuration information
kernel: Nosave address range: 0000000000093000 - 0000000000094000
kernel: Nosave address range: 0000000000093000 - 0000000000098000
kernel: Nosave address range: 0000000000098000 - 00000000000a0000
kernel: Nosave address range: 00000000000a0000 - 00000000000f0000
kernel: Nosave address range: 00000000000f0000 - 0000000000100000
kernel: Nosave address range: 000000007d7d4000 - 000000007d7de000
kernel: Allocating PCI resources starting at 88000000 (gap:
80000000:74000000)
kernel: SMP: Allowing 64 CPUs, 60 hotplug CPUs
kernel: Built 1 zonelists. Total pages: 505346
kernel: Kernel command line: ro root=/dev/md2
kernel: Initializing CPU#0
kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
kernel: Console: colour VGA+ 80x25
kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
kernel: Checking aperture...
kernel: Memory: 2012576k/2056060k available (2627k kernel code, 42944k
reserved, 1677k data, 224k init)
kernel: Calibrating delay loop (skipped), value calculated using timer
frequency.. 6186.24 BogoMIPS (lpj=3093121)
kernel: Security Framework v1.0.0 initialized
kernel: SELinux: Initializing.
kernel: selinux_register_security: Registering secondary module capability
kernel: Capability LSM initialized as secondary
kernel: Mount-cache hash table entries: 256
kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
kernel: CPU: L2 cache: 256K
kernel: CPU: L3 cache: 8192K
kernel: using mwait in idle threads.
kernel: CPU: Physical Processor ID: 0
kernel: CPU: Processor Core ID: 0
kernel: MCE: Machine Check Exception Reporting is disabled.
kernel: SMP alternatives: switching to UP code
kernel: ACPI: Core revision 20060707
kernel: Using local APIC timer interrupts.
kernel: Detected 6.236 MHz APIC timer.
kernel: SMP alternatives: switching to SMP code
kernel: Booting processor 1/4 APIC 0x2
kernel: Initializing CPU#1
kernel: Calibrating delay using timer specific routine.. 6185.87 BogoMIPS
(lpj=3092938)
kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
kernel: CPU: L2 cache: 256K
kernel: CPU: L3 cache: 8192K
kernel: CPU: Physical Processor ID: 0
kernel: CPU: Processor Core ID: 1
kernel: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09
kernel: SMP alternatives: switching to SMP code
kernel: Booting processor 2/4 APIC 0x4
kernel: Initializing CPU#2
kernel: Calibrating delay using timer specific routine.. 6185.88 BogoMIPS
(lpj=3092941)
kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
kernel: CPU: L2 cache: 256K
kernel: CPU: L3 cache: 8192K
kernel: CPU: Physical Processor ID: 0
kernel: CPU: Processor Core ID: 2
kernel: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09
kernel: SMP alternatives: switching to SMP code
kernel: Booting processor 3/4 APIC 0x6
kernel: Initializing CPU#3
kernel: Calibrating delay using timer specific routine.. 6185.86 BogoMIPS
(lpj=3092932)
kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
kernel: CPU: L2 cache: 256K
kernel: CPU: L3 cache: 8192K
kernel: CPU: Physical Processor ID: 0
kernel: CPU: Processor Core ID: 3
kernel: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09
kernel: Brought up 4 CPUs
kernel: NMI watchdog testing PASSED.
kernel: time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
kernel: time.c: Detected 3093.121 MHz processor.
kernel: migration_cost=23
kernel: checking if image is initramfs... it is
kernel: Freeing initrd memory: 2693k freed
kernel: NET: Registered protocol family 16
kernel: ACPI: bus type pci registered
kernel: Warning: pci_mmcfg_init marking 256MB space uncacheable.
kernel: MCFG table requires 64MB uncacheable only. Try booting with
acpi_mcfg_max_pci_bus_num=on
kernel: PCI: Using MMCONFIG at f4000000
kernel: ACPI: Interpreter enabled
kernel: ACPI: Using IOAPIC for interrupt routing
kernel: ACPI: No dock devices found.
kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
kernel: pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
kernel: pci 0000:00:1c.4: PCI bridge to [bus 02-02]
kernel: pci 0000:00:1c.7: PCI bridge to [bus 01-01]
kernel: pci 0000:00:1e.0: PCI bridge to [bus 13-13] (subtractive decode)
kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *4
kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled.
kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
kernel: pnp: PnP ACPI init
kernel: pnp: PnP ACPI: found 10 devices
kernel: usbcore: registered new driver usbfs
kernel: usbcore: registered new driver hub
kernel: PCI: Using ACPI for IRQ routing
kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
kernel: NetLabel: Initializing
kernel: NetLabel: domain hash size = 128
kernel: NetLabel: protocols = UNLABELED CIPSOv4
kernel: NetLabel: unlabeled traffic allowed by default
kernel: hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8,
0, 0, 0, 0, 0, 0
kernel: hpet0: 8 64-bit timers, 14318180 Hz
kernel: DMAR:Host address width 39
kernel: DMAR:DRHD base: 0x000000fed90000 flags: 0x1
kernel: IOMMU fed90000: ver 1:0 cap c9008020660262 ecap f010da
kernel: DMAR:RMRR base: 0x0000007dffd000 end: 0x0000007dffffff
kernel: DMAR:No ATSR found
kernel: PCI-GART: No AMD northbridge found.
kernel: system 00:01: ioport range 0x408-0x40f has been reserved
kernel: system 00:01: ioport range 0x4d0-0x4d1 has been reserved
kernel: system 00:01: ioport range 0x310-0x313 has been reserved
kernel: system 00:01: iomem range 0xf4000000-0xf7ffffff has been reserved
kernel: system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
kernel: system 00:01: iomem range 0xfed90000-0xfed91fff has been reserved
kernel: pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
kernel: pci 0000:00:1c.0: bridge window [io disabled]
kernel: pci 0000:00:1c.0: bridge window [mem disabled]
kernel: pci 0000:00:1c.0: bridge window [mem pref disabled]
kernel: pci 0000:00:1c.4: PCI bridge to [bus 02-02]
kernel: pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
kernel: pci 0000:00:1c.4: bridge window [mem 0xfbf00000-0xfbffffff]
kernel: pci 0000:00:1c.4: bridge window [mem pref disabled]
kernel: pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref]
kernel: pci 0000:00:1c.7: PCI bridge to [bus 01-01]
kernel: pci 0000:00:1c.7: bridge window [io 0x2000-0x3fff]
kernel: pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbefffff]
kernel: pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit
pref]
kernel: pci 0000:00:1e.0: PCI bridge to [bus 13-13]
kernel: pci 0000:00:1e.0: bridge window [io disabled]
kernel: pci 0000:00:1e.0: bridge window [mem disabled]
rpc.statd[2187]: Version 1.0.9 Starting
kernel: pci 0000:00:1e.0: bridge window [mem pref disabled]
kernel: GSI 16 sharing vector 0xA9 and IRQ 16
kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ
169
kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ
169
kernel: GSI 17 sharing vector 0xB1 and IRQ 17
kernel: ACPI: PCI Interrupt 0000:00:1c.7[D] -> GSI 19 (level, low) -> IRQ
177
kernel: NET: Registered protocol family 2
kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
kernel: TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
kernel: TCP: Hash tables configured (established 262144 bind 65536)
kernel: TCP reno registered
kernel: audit: initializing netlink socket (disabled)
kernel: type=2000 audit(1420618613.662:1): initialized
kernel: Total HugeTLB memory allocated, 0
kernel: VFS: Disk quotas dquot_6.5.1
kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
kernel: Initializing Cryptographic API
kernel: alg: No test for crc32c (crc32c-generic)
kernel: ksign: Installing public key data
kernel: Loading keyring
kernel: - Added public key B69F0AC84A59E856
kernel: - User ID: CentOS (Kernel Module GPG key)
kernel: io scheduler noop registered
kernel: io scheduler anticipatory registered
kernel: io scheduler deadline registered
kernel: io scheduler cfq registered (default)
kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
kernel: ACPI: CPU0 (power states: C1[C1] C2[C2])
kernel: ACPI: CPU1 (power states: C1[C1] C2[C2])
kernel: ACPI: CPU2 (power states: C1[C1] C2[C2])
kernel: ACPI: CPU3 (power states: C1[C1] C2[C2])
kernel: ACPI: Thermal Zone [THM0] (8 C)
kernel: Real Time Clock Driver v1.12ac
kernel: Non-volatile memory driver v1.2
kernel: Linux agpgart interface v0.101 (c) Dave Jones
kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
kernel: brd: module loaded
kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
kernel: ide-floppy driver 0.99.newide
kernel: usbcore: registered new driver hiddev
kernel: usbcore: registered new driver usbhid
kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq
1,12
kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
kernel: mice: PS/2 mouse device common for all mice
kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
kernel: md: bitmap version 4.39
kernel: TCP bic registered
kernel: Initializing IPsec netlink socket
kernel: NET: Registered protocol family 1
kernel: NET: Registered protocol family 17
kernel: ACPI: (supports S0 S4 S5)
kernel: Initalizing network drop monitor service
kernel: Freeing unused kernel memory: 224k freed
kernel: Write protecting the kernel read-only data: 533k
kernel: input: AT Translated Set 2 keyboard as /class/input/input0
kernel: GSI 18 sharing vector 0xD9 and IRQ 18
kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 21 (level, low) -> IRQ
217
kernel: ehci_hcd 0000:00:1a.0: EHCI Host Controller
kernel: ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
kernel: ehci_hcd 0000:00:1a.0: debug port 2
kernel: ehci_hcd 0000:00:1a.0: irq 217, io mem 0xfacd0000
kernel: ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
kernel: usb usb1: configuration #1 chosen from 1 choice
kernel: hub 1-0:1.0: USB hub found
kernel: hub 1-0:1.0: 2 ports detected
kernel: GSI 19 sharing vector 0xE1 and IRQ 19
kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ
225
kernel: ehci_hcd 0000:00:1d.0: EHCI Host Controller
kernel: ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
kernel: ehci_hcd 0000:00:1d.0: debug port 2
kernel: ehci_hcd 0000:00:1d.0: irq 225, io mem 0xfacc0000
kernel: ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
kernel: usb usb2: configuration #1 chosen from 1 choice
kernel: hub 2-0:1.0: USB hub found
kernel: hub 2-0:1.0: 2 ports detected
kernel: USB Universal Host Controller Interface driver v3.0
kernel: ACPI: PCI Interrupt 0000:01:00.4[B] -> GSI 16 (level, low) -> IRQ
169
kernel: uhci_hcd 0000:01:00.4: UHCI Host Controller
kernel: uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3
kernel: uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
kernel: uhci_hcd 0000:01:00.4: irq 169, io base 0x00002000
kernel: usb usb3: configuration #1 chosen from 1 choice
kernel: hub 3-0:1.0: USB hub found
kernel: hub 3-0:1.0: 2 ports detected
kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2
kernel: md: raid1 personality registered for level 1
kernel: SCSI subsystem initialized
kernel: GSI 20 sharing vector 0xE9 and IRQ 20
kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ
233
kernel: usb 1-1: configuration #1 chosen from 1 choice
kernel: hub 1-1:1.0: USB hub found
kernel: hub 1-1:1.0: 6 ports detected
kernel: usb 2-1: new high speed USB device using ehci_hcd and address 2
kernel: usb 2-1: configuration #1 chosen from 1 choice
kernel: hub 2-1:1.0: USB hub found
kernel: hub 2-1:1.0: 6 ports detected
kernel: usb usb3: Controller not stopped yet!
kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl
SATA mode
kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp
pio slum part ems
kernel: scsi0 : ahci
kernel: scsi1 : ahci
kernel: scsi2 : ahci
kernel: scsi3 : ahci
kernel: scsi4 : ahci
kernel: scsi5 : ahci
kernel: ata1: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0100 irq 50
kernel: ata2: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0180 irq 50
kernel: ata3: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0200 irq 50
kernel: ata4: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0280 irq 50
kernel: ata5: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0300 irq 50
kernel: ata6: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0380 irq 50
kernel: ata1: SATA link down (SStatus 0 SControl 300)
kernel: ata2: SATA link down (SStatus 0 SControl 300)
kernel: ata3: SATA link down (SStatus 0 SControl 300)
kernel: ata4: SATA link down (SStatus 0 SControl 300)
kernel: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
kernel: ata5.00: ATA-8: MB1000GCEHH, HPGD, max UDMA/133
kernel: ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
kernel: ata5.00: configured for UDMA/133
kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
kernel: ata6.00: ATA-8: MB1000GCEHH, HPGD, max UDMA/133
kernel: ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
kernel: ata6.00: configured for UDMA/133
kernel: Vendor: ATA Model: MB1000GCEHH Rev: HPGD
kernel: Type: Direct-Access ANSI SCSI revision: 05
kernel: SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB)
kernel: sda: Write Protect is off
kernel: SCSI device sda: drive cache: write back
kernel: SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB)
kernel: sda: Write Protect is off
kernel: SCSI device sda: drive cache: write back
kernel: sda: sda1 sda2 sda3
kernel: sd 4:0:0:0: Attached scsi disk sda
kernel: Vendor: ATA Model: MB1000GCEHH Rev: HPGD
kernel: Type: Direct-Access ANSI SCSI revision: 05
kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
kernel: sdb: Write Protect is off
kernel: SCSI device sdb: drive cache: write back
kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
kernel: sdb: Write Protect is off
kernel: SCSI device sdb: drive cache: write back
kernel: sdb: sdb1 sdb2 sdb3
kernel: sd 5:0:0:0: Attached scsi disk sdb
kernel: md: raid0 personality registered for level 0
kernel: Initializing USB Mass Storage driver...
kernel: usbcore: registered new driver usb-storage
kernel: USB Mass Storage support registered.
kernel: device-mapper: uevent: version 1.0.3
kernel: device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised:
dm-devel(a)redhat.com
kernel: device-mapper: dm-raid45: initialized v0.2594l
kernel: md: Autodetecting RAID arrays.
kernel: md: autorun ...
kernel: md: considering sdb3 ...
kernel: md: adding sdb3 ...
kernel: md: sdb2 has different UUID to sdb3
kernel: md: sdb1 has different UUID to sdb3
kernel: md: adding sda3 ...
kernel: md: sda2 has different UUID to sdb3
kernel: md: sda1 has different UUID to sdb3
kernel: md: created md2
kernel: md: bind<sda3>
kernel: md: bind<sdb3>
kernel: md: running: <sdb3><sda3>
kernel: raid1: raid set md2 active with 2 out of 2 mirrors
kernel: md: considering sdb2 ...
kernel: md: adding sdb2 ...
kernel: md: sdb1 has different UUID to sdb2
kernel: md: adding sda2 ...
kernel: md: sda1 has different UUID to sdb2
kernel: md: created md0
kernel: md: bind<sda2>
kernel: md: bind<sdb2>
kernel: md: running: <sdb2><sda2>
kernel: md0: setting max_sectors to 512, segment boundary to 131071
kernel: raid0: looking at sdb2
kernel: raid0: comparing sdb2(2096384) with sdb2(2096384)
kernel: raid0: END
kernel: raid0: ==> UNIQUE
kernel: raid0: 1 zones
kernel: raid0: looking at sda2
kernel: raid0: comparing sda2(2096384) with sdb2(2096384)
kernel: raid0: EQUAL
kernel: raid0: FINAL 1 zones
kernel: raid0: done.
kernel: raid0 : md_size is 4192768 blocks.
kernel: raid0 : conf->hash_spacing is 4192768 blocks.
kernel: raid0 : nb_zone is 1.
kernel: raid0 : Allocating 8 bytes for hash.
kernel: md: considering sdb1 ...
kernel: md: adding sdb1 ...
kernel: md: adding sda1 ...
kernel: md: created md1
kernel: md: bind<sda1>
kernel: md: bind<sdb1>
kernel: md: running: <sdb1><sda1>
kernel: raid1: raid set md1 active with 2 out of 2 mirrors
kernel: md: ... autorun DONE.
kernel: md: Autodetecting RAID arrays.
kernel: md: autorun ...
kernel: md: ... autorun DONE.
kernel: kjournald starting. Commit interval 5 seconds
kernel: EXT3-fs: mounted filesystem with ordered data mode.
kernel: SELinux: Disabled at runtime.
kernel: type=1404 audit(1420618647.375:2): selinux=0 auid=4294967295
ses=4294967295
kernel: input: PC Speaker as /class/input/input1
kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
kernel: ACPI: PCI Interrupt 0000:01:00.2[B] -> GSI 16 (level, low) -> IRQ
169
kernel: e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
kernel: e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
kernel: e1000e 0000:02:00.0: Disabling ASPM L0s L1
kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ
169
kernel: e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to
dynamic conservative mode
kernel: Floppy drive(s): fd0 is 1.44M
kernel: sd 4:0:0:0: Attached scsi generic sg0 type 0
kernel: sd 5:0:0:0: Attached scsi generic sg1 type 0
kernel: e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1)
38:ea:a7:aa:8a:32
kernel: e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
kernel: e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
kernel: floppy0: no floppy controllers found
kernel: work still pending
kernel: Floppy drive(s): fd0 is 1.44M
kernel: floppy0: no floppy controllers found
kernel: work still pending
kernel: lp: driver loaded but no devices found
kernel: ACPI: Power Button (FF) [PWRF]
kernel: ACPI: Mapper loaded
kernel: dell-wmi: No known WMI GUID found
kernel: md: Autodetecting RAID arrays.
kernel: md: autorun ...
kernel: md: ... autorun DONE.
kernel: device-mapper: multipath: version 1.0.6 loaded
kernel: EXT3 FS on md2, internal journal
kernel: kjournald starting. Commit interval 5 seconds
kernel: EXT3 FS on md1, internal journal
kernel: EXT3-fs: mounted filesystem with ordered data mode.
kernel: Adding 4192760k swap on /dev/md0. Priority:-1 extents:1
across:4192760k
kernel: Loading iSCSI transport class v2.0-871.
kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb(a)candelatech.com>
kernel: All bugs added by David S. Miller <davem(a)redhat.com>
kernel: libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4
bits.
kernel: libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
kernel: Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
kernel: iscsi: registered transport (cxgb3i)
kernel: IPv6: Loaded, but administratively disabled, reboot required to
enable
kernel: cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012)
kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Jun 18, 2012)
kernel: iscsi: registered transport (bnx2i)
kernel: iscsi: registered transport (tcp)
kernel: iscsi: registered transport (iser)
kernel: iscsi: registered transport (be2iscsi)
kernel: 8021q: adding VLAN 0 to HW filter on device eth0
kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
ntpd[2452]: ntpd 4.2.2p1(a)1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
ntpd[2453]: precision = 1.000 usec
ntpd[2453]: Listening on interface wildcard, 0.0.0.0#123 Disabled
ntpd[2453]: Listening on interface lo, 127.0.0.1#123 Enabled
ntpd[2453]: Listening on interface eth0, 178.18.69.1#123 Enabled
ntpd[2453]: kernel time sync status 0040
ntpd[2453]: getaddrinfo: "::1" invalid host address, ignored
xinetd[2437]: xinetd Version 2.3.14 started with libwrap loadavg
labeled-networking options compiled in.
xinetd[2437]: Started working: 1 available service
FaxQueuer[2970]: HylaFAX (tm) Version 4.3.10
FaxQueuer[2970]: Copyright (c) 1990-1996 Sam Leffler
FaxQueuer[2970]: Copyright (c) 1991-1996 Silicon Graphics, Inc.
HylaFAX[2973]: HylaFAX INET Protocol Server: restarted.
saslauthd[3001]: detach_tty : master pid is: 3001
saslauthd[3001]: ipc_init : listening on socket:
/var/run/saslauthd/mux
ntpd[2453]: frequency initialized 8.527 PPM from /var/lib/ntp/drift
ntpd[2453]: synchronized to 200.27.106.115, stratum 1
ntpd[2453]: kernel time sync enabled 0001
