Discuss

discuss@lists.centos.org

34758 discussions

install on via 800mhz box 4.4
by Jerry Geis 28 Sep '06

28 Sep '06

I tried install 4.4 on an old Via 800mhz box. i386 of course. The installer dies pretty quick. I thought the via was i386 compatible? Is there something special to do. Jerry

5 5

Re-doing the MBR
by Al Sparks 28 Sep '06

28 Sep '06

I tried to install CentOS 4.4. This was on a machine where I've got Windows XP on the first partition (hda1). CentOS, like most of the distros will automatically install Grub in the MBR unless you tell it not to. In fact it will wipe the MBR first pretty early in the install. Here was my problem. During the install, the second CD had some sort of read issue. So I had to abort the install by intervening with the power switch. So when I rebooted, I couldn't boot into my XP because the MBR had been wiped. I pulled out an Insert distribution and did a RAM only boot up. I could still see my NTFS partition where XP was located, and I could also see where the CentOS installed the /boot partition in /dev/hda2. Now I finally solved this problem by going back and doing a minimal install of CentOS which doesn't require the second CD. I've now got something in the MBR, and I'm up an running. But does anyone have suggestions on how to semi-manually install grub so that it sees what it calls the "other" partition to boot into? Is there a tool out there that will do that? I mean, what if the install had hung up on the first disk instead? === Al

3 2

Re: xpdf and other alternatives
by Steve Bergman 28 Sep '06

28 Sep '06

On Thu, 2006-09-28 at 12:54 -0400, Michael V. De Palatis wrote: > Certainly. But I like Epiphany over Firefox for a number of reasons > (see, e.g., the recent issues between Debian and the Mozilla > Foundation; also, e.g., the lighter interface). Indeed, Mozilla Corp. may be the best marketing partner that other Linux browser projects have right now! ;-) Perhaps: strace -o epiphany.trace -f epiphany would shed some light on where it is picking up acroread? Perhaps if it can't get its apps the gnome way, it falls back to some other, more conventional unix way? Have you checked /etc/mailcap and ~/.mailcap? -Steve

1 1

rebuilding centos 2.1 isos
by Aleksandar Milivojevic 28 Sep '06

28 Sep '06

Hi, I'm attempting to rebuild CentOS 2.1 ISOs with the latest kernel (to attempt installation on some newer hardware with SATA drives). It seems that the original build environment used different version of anaconda than shipped with CentOS 2.1 (7.2-77_ELAS vs 7.2.32AS). I found SRPM of 7.2.32AS, however I'm wondering if there is binary package also? BTW, any hints on the things that might be problematic with rebuilding the ISOs with newer kernel are more than welcome ;-) Thanks -- NOTICE: If you are not intended recipient, you are hereby notified that by reading this message you agreed not to disturb frogs during mating season. For more info, visit http://www.8-P.ca/

2 2

Install Using Floppy/CD
by Charles Sliger 28 Sep '06

28 Sep '06

Is there a doc that describes how to create a floppy that will boot and then switch over to the installation CD? It looks to me like this should be possible using grub on the floppy. Charles L. Sliger, Information Systems Engineer, chaz(a)bctonline.com "No matter where you go, there you are..."

6 8

interactive bash v3 sessions and yank-last-arg
by Wojtek.Pilorz 28 Sep '06

28 Sep '06

The readline function yank-last-arg (normally called through M-. or M-_) in bash3 work somewhat differently than in older bash versions for commented lines: For example, if I run in bash echo 1 2 3 #echo a b c then Esc-2 Esc-. produces alarm on first try and '2' on second try; So I can recall commented history lines using Esc-p, but not the arguments using Esc-. In older versions yank-last-arg worked on commented lines as well, which was very handy. Does anyone know, how to enable that 'old' behaviour in bash?

1 0

Trouble with X and vnc-4.0-8.1.i386 on Centos 4.4
by Wojtek.Pilorz 28 Sep '06

28 Sep '06

I have recently migrated from an old, RedHat Linux 9 - based system (Aurox 9.2) to Centos 4.4. I am having trouble with vnc causing X unusable until reboot. By unusable I mean that X screen is either blank or blinking and moving, which is not cured by X restart until reboot. My system is: Compaq EVO D510 SFF CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz RAM: 256 MB Video: 00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01) (prog-if 00 [VGA]) X: X Window System Version 6.8.2, using KDE in runlevel 3 kernel: Linux version 2.6.9-42.0.2.EL (buildsvn@build-i386) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) Monitor: Dell E176FP (LCD, resolution 1280x1024) Mouse: Compaq/Logitech PS/2 mouse with wheel The X driver used is i810 How I get into trouble: I connect to an NT 4.0 Workstation box running 800x600 resolution with vnc; my resolution is 1280x1024 so the letters are too small for me and I switch resolution to 1024x768 or 800x600 using Ctrl-Alt-+; When I move mouse pointer so it leaves vnc window (sometimes through bottom vnc window border, sometimes through right border) then screen starts blinking with the image displayed multiple times and moving. Whether the image is moving and how fast depends on mouse position (X coordinate) on the screen (the mouse cursor is not visible, btw). If I move mouse vertically, lower part of the screen is is black. If I turn on screen saver (which is analog clock) it is displayed perfectly well on both resolution I tried ( 1280x1024 and 1024x768). but when I go back to KDE the screen is again unusable. If I switch to a text console, text mode is perfectly well, too. OSD display from the monitor is OK and stable all the time. If I exit X and then start it again, the screen is either blank while in X, or blinking. (if I exit X through Ctrl-Alt-Backspace it was blank; if I exit X using KDE menus, and the start it again, it is sometimes blank, sometimes blinking). After CentOS is rebooted all is fine. If I do not change X resolution from the default 1280x1024, vnc work fine all the time. I do not see anything special in var/log/messages. On VT I started X from, I have a message (1600x1200,Monitor0) mode clock 162MHz exceeds DDC maximum 140MHz each time I switch from text console to X (or perhaps the other way), same whether X is working correctly or not. I have never had that kind of problem with old RHL9-based distribution. Has anyone seen such behaviour? I would appreciate any advice. (I will send more info is needed, perhaps /var/log/Xorg.0.log ?) Best regards, Wojtek ------------------------------ Screen-related sections of my /etc/X11/xorg.conf file are as follows: Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "DELL E176FP" DisplaySize 340 270 HorizSync 31.0 - 80.0 VertRefresh 56.0 - 75.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "i810" VendorName "Videocard vendor" BoardName "Intel 845" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 16 Modes "1280x1024" EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x1024" "1024x768" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection

2 1

Lan Monitoring Software on Centos
by ankush grover 28 Sep '06

28 Sep '06

hey friends, I am looking for a free Lan Monitoring Software/tool on Centos. My Network is hetrogenous consisting of Windows XP/2000/2003/98, Pix Firewall, APC UPS, Printers , Laptops. I want to monitor Desktops & Laptops and want a daily, weekly,monthly reports for each and every client with the details like Bandwidth spend on www, mail, chatting. Company wants to track how much bandwidth each client is consuming and on what. Is there any such tool available? I am using Centos 4.0 Thanks & Regards Ankush Grover

3 2

Re: Samba setup for CentOS-4.4 workstations
by James B. Byrne 28 Sep '06

28 Sep '06

I altered the /etc/samba/smb.conf file to use '_' as the winbind separator character and asigned BROCKLEY_ADMINISTRATOR to the admin users: ---> winbind separator = _ admin users = BROCKLEY_ADMINISTRATOR <--- After a restart of the smb service (#service smb restart) I get this: ---> # smbclient -L BRDC-01 Password: <cr> Domain=[BROCKLEY] OS=[Windows 5.0] Server=[Windows 2000 LAN Manager] Sharename Type Comment --------- ---- ------- USERS$ Disk Redirected User Folders PMAIL$ Disk Pegasus E-Mail network depository imports.1 Printer Duplex - XCap Tray IPC$ IPC Remote IPC print$ Disk Printer Drivers exports.1 Printer HP LaserJet 4 P1 NETLOGON Disk Logon server share QB$ Disk QuickBooks Financial Data Share UPLOAD$ Disk General file depository PROFILES$ Disk Roaming Profiles Folder UPLOAD Disk General File Depository ADMIN$ Disk Remote Admin SYSVOL Disk Logon server share C$ Disk Default share imports.3 Printer HP LaserJet 2100 P03 imports.2 Printer HP LaserJet 2100 P02 Domain=[BROCKLEY] OS=[Windows 5.0] Server=[Windows 2000 LAN Manager] Server Comment --------- ------- BRDC-01 Primary Domain Contoller BRDC-02 Secondary Domain Cintroller BRMS-02 Administration BRWS-09 Accounting BRWS-11 Exports BRWS-14 Administration BRWS-15 Imports BRWS-16 Imports BRWS-17 ... snip BRWS-LX-01 BRWS-LX-01.brockley.harte-lyne.ca BRWS-MW-19 Workgroup Master --------- ------- BROCKLEY BRDC-01 [root@BRWS-LX-01 etc]# mount -t smbfs //brdc-01/upload$ /ms-win/shares -U brockley_byrnejb mount: bad UUID <--- So, a bad UUID tells me that I am not getting a UUID from the PDC and that the one being provided by the smbclient is meaningless. So, how do I obtain an appropriate UUID/GUID assigned to look at these shares? -- James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 2

Systems hangs on boot
by Jordi Espasa Clofent 28 Sep '06

28 Sep '06

Hi all, I've a AMD64 box with CentOS 4.4 and FreeBSD 6.1 installed. All worked fine until I installed webmin. Since webmin was installed, the system hangs during the boot process. Completely hangs: included the mouse, , no ctrl+alt+f(n) keycombo... The system hangs when try to load the webmin service, so I reboot with runlevel 1 and reconfigure the runlevel with chekconfig tool (I've deactivated the webmin service). And.. the systems works fine. Now (after 2/3 reboots) the systems shows the same problem, but in the HAL service. I've tried to work with FreeBS and everything works fine, so I rule out a hardware problem. -- Jordi Espasa Clofent PGP id 0xC5ABA76A #http://pgp.mit.edu/ FSF Associate Member id 4281 #http://www.fsf.org/

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss