virt

virt@lists.centos.org

2 participants
1613 discussions

VMware Server 2 fails on 5.6
by Benjamin Franz 10 Apr '11

10 Apr '11

So others can avoid the lesson I learned this morning, VMware Server 2 stopped working after upgrading to 5.6 from a working 5.5 install (with the libc workaround for 5.4+ already in place). Some Google-Fu indicates the problem is linked to more supporting libraries being changed (zlib, libxml2, possibly others) in addition to the existing libc issue. I get a segmentation fault trying to launch VM Server 2 and have been unsuccessful so far in getting my install to work again. My own solution is I am rebuilding the physical hardware for KVM support and temporarily hosting the VMware VMs on a second machine I have still running 5.5 as I transition to KVM since it became apparent some time ago that VMware Server 2 is no longer a tenable platform. -- Benjamin Franz

2 1

Vlan trunk/QinQ connected to KVM guest
by Nataraj 04 Apr '11

04 Apr '11

I am running KVM guests under Redhat 6. I tried to setup a bridge device to an interface with a vlan trunk connected to a Juniper switch. On the KVM host, I am able to define vlans and access them via the vlan trunk. I was not able to access a vlan from the kvm guest connected to the bridged interface. I believe this would be what is commonly called QinQ or 802.1ad. Is this possible to do? I am using virtio drivers. If I can't do this, I guess I will end up with alot of bridged vlans. I tried doing this a while back under the vmware server and it did not work either. I think the reason that it did not work had something to do with arp resolution. I believe I read some where that it may be possible under ESXi. Thanks, Nataraj

3 4

Time lagging on DomU
by Dennis Jacobfeuerborn 17 Mar '11

17 Mar '11

Hi, on one of our systems I see that while the time on the Centos 5.4 Host is correct it lags behind on two of the 5.5 guests by almost 5 minutes but is correct for the third domU. From what I understand the clock of the system is controlled by the host and and guest cannot write to it (and because of that not change it). Does anyone now what the cause could be and how I can fix the time for the guests? Running kernel versions: Host (correct time): 2.6.18-164.15.1.el5xen guest 1 (correct time): 2.6.18-194.3.1.el5xen guest 2 (wrong time): 2.6.18-194.32.1.el5xen guest 3 (wrong time): 2.6.18-194.el5xen Regards, Dennis

2 1

Resizing EXT3 partition in guest instance CentOS5
by Poh Yong Hwang 14 Mar '11

14 Mar '11

Hi, I have two guest vm instance running CentOS 5 with ext3 partition. I will like to reduce 1 VM harddisk space and using the 'release' harddisk space to add onto my second VM. Basically I need to know how can I reduce and increase an ext3 partition in CentOS KVM. I did a search and basically i can do it by booting the VM using Knoppix and use Gparted to reduce and increase the diskspace. I am thinking of the following 1) Boot first VM using Knoppix 2) Reduce the ext3 partition disk size using Gparted 3) Shutdown the VM and resize the diskspace using Virtual Manager 4) Increae the diskspace of the second VM using Virtual Manager 5) Boot up second VM using Knoppix 6) Increase the ext3 partition disk size using Gparted 7) Reboot the second VM As this is the first time i am doing it, will these work? Anyone has experience resiziing their EXT3 partition in KVM environment before? Thanks! Regards yongsan

6 19

Next3 (eg ext3 snapshots support) on OpenNode / CentOS 5 / RHEL 5 howto and rpms
by Andres Toomsalu 10 Mar '11

10 Mar '11

We have created an next3 and patched e2fsprogs OpenNode / CentOS 5 / RHEL 5 rpms - installable from opennode-test yum repo. Provided next3 kernel module is currently built against RHEL5 OpenVZ kernel used in OpenNode - so installing this next3 rpm package on your CentOS 5 or RHEL 5 host will install also OpenVZ patched RHEL5 kernel and newer e2fsprogs package. Installation and usage instructions are provided by this howto document: http://opennode.activesys.org/documentation/howtos/next3-snapshots/ There is also simple next3 snapshotting automation script available for use with cron - usage and download link provided in howto document referenced above. Regards, -- ---------------------------------------------- Andres Toomsalu, andres(a)active.ee

1 0

Virtual Machine
by Mark Smith 09 Mar '11

09 Mar '11

Hi everyone, I am still struggling to install a Windows XP host within my virtual machine manager, i can't seem to do a http, ftp and nfs. Can someone explain a simpler way of installing i have read all the Redhat documentation but still struggling :-( Thanks Mark

4 10

iaStor Error
by MargoAndTodd 01 Mar '11

01 Mar '11

1 0

Finding inputvsc.iso...
by Tommy Hellberg 01 Mar '11

01 Mar '11

Hello! First time poster, longtime lurker here. I have been trying to get full functionality on a Centos 5.5 in a Hyper-V environment but the mouse pointer is not cooperating at all. It seems I need to find a file called inputvsc.iso that xen has until recently distributed. However the file is nowhere to be found. The link http://www.xen.org/download/satori.html is out of order and I have googled my eyes out all day to no avail. Does anyone have a working source/link for this ISO? =T=

1 0

Xen Hypervisor HELP?
by Mark Smith 18 Feb '11

18 Feb '11

Hi Guys, Sorry i am trying to install a GuestOS but can't seem to be able to select CD rom during creating a new GuestOS is there Paravirtualization is there a way to enable it or can someone explain how to mount an ISO for me to be able to point to during install as the only options i have is FTP, NFS etc. Thanks Rockyuk

2 1

Xen Hypervisor HELP?
by Mark Smith 17 Feb '11

17 Feb '11

Hi Everyone, I am new to Xen Hypervisor and wanted to know if someone has any good guides to configuring it please. Also once i configure a Guest OS how can i connect to it remotely via a windows and linux machine? Thanks Rockyuk

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

virt