virt

virt@lists.centos.org

1608 discussions

virsh autostart: cannot set autostart for transient domain
by Christopher Hunt 13 Nov '09

13 Nov '09

Hello all, I'm running a newly installed CentOS 5.4 KVM host and am running into problems setting guests up to autostart. Has anyone seen and/or overcome this issue? [root@virt04 ~]# virsh autostart guest02 error: Failed to mark domain guest02 as autostarted error: internal error cannot set autostart for transient domain Just for kicks I tried symlinking /etc/libvirt/guest02.xml and /etc/libvirt/autostart/guest02.xml, but to no avail. I've entered "virsh create /root/vms/guest2.xml" into /etc/rc.d/rc.local for now. Thanks Christopher Hunt

1 0

CentOS-5.4, KVM, QEMU, Virt-Manager and kvm-qemu-img
by James B. Byrne 11 Nov '09

11 Nov '09

What is the correct combination of packages to configure and manage VMs via virt-manager undet CentOS-5.4? If I use qemu then while virt-manager works I obtain SELinux alerts with respect to the real-time clock. If instead of qemu I use kvm-qemu-img then virt-manager simply does not work. It starts but it does not find any form of qemu and the selection boxes are all greyed out. Further, do I need tun/tap to host VMs that themselves support virtual ips? The module for tun I found as part of the base install. But I cannot locate the module for ethertap and yum does not tell me where it is found. Lastly, why is qemu 4.5M but kvm-qemu-img is only 125K? Regards, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

4 15

Xen pci passthru problems with kernel -164.6.1
by Miguel Di Ciurcio Filho 10 Nov '09

10 Nov '09

I previously reported this on the centos mailing list: http://lists.centos.org/pipermail/centos/2009-November/085672.html And I've found out that Red Hat has backported the VT-d support from Xen 3.3 to RHEL 5.4. http://lists.centos.org/pipermail/centos/2009-November/085677.html It seams to me that the "classic" Xen pci-passthru (up to Xen 3.2) works only on some minor cases as described here (when using the new kernel and hypervisor): https://bugzilla.redhat.com/show_bug.cgi?id=514458#c4 The recommendation seams to be (although not stated at any documentation) to use the VT-d support for various reasons (better security for the guests when accessing the hardware I guess). My concern is that the hardware I use does not support VT-d (it is a Intel 5000P chipset, ~2 years old) so I believe I'm kind of screwed. Or keep using the kernel and Xen packages from 5.3 (not a good option either). Am I the only one bitten by this?

3 2

Migrating from KVM to XEN - kernel panic
by Christopher Hunt 10 Nov '09

10 Nov '09

First let me say that I'm not a sysadmin, but am simply wearing that hat this week so please excuse my ignorance. I need to temporarily move some virtual servers from a CentOS-KVM platform to a CentOS-XEN platform while I do some upgrades to the CentOS box. I've created a local LV, and used DD and SCP to transfer the block device from the VKM machine to the XEN machine. For quite a while I struggled with the "Error: (2, 'Invalid kernel', 'xc_dom_parse_elf_kernel: ELF image has no shstrtab\n')" error but thanks to Nick Couchman from http://lists.xensource.com/archives/html/xen-users/2008-03/msg00603.html, I've passed that. Now I'm stuck with a kernel panic situation. Unfortunately the kernel panic error doesn't appear using "xm console" and flashes so quickly through "virt-viewer" that I can't get any details. I think it may have to do with the differing file structures on the 2 Host machines. The KVM machine mounts / on /dev/mapper/vg00-root whereas the XEN machine mounts / on /dev/mapper/VMM01-KVMvg00-c5root00: [root@VMM01-KVM ~]# mount /dev/mapper/vg00-root on / type ext3 (rw) [root@VMM03-XEN xen]# mount /dev/mapper/VMM01-KVMvg00-c5root00 on / type ext3 (rw) Interesting log file entries: [2009-11-06 10:27:26 xend 5112] DEBUG (blkif:27) exception looking up device number for xvda: [Errno 2] No such file or directory: '/dev/xvda' [2009-11-06 10:27:26 xend 5112] DEBUG (blkif:27) exception looking up device number for xvda: [Errno 2] No such file or directory: '/dev/xvda' -------------------------------------------------------------------------------- The domU is configured thusly: [root@VMM03-XEN xen]# cat /etc/xen/guest02 # Automatically generated xen config file name = "guest02" memory = "1024" disk = [ 'phy:/dev/VMM01-KVMvg00/guest02,xvda,w', ] vif = [ 'mac=00:16:3e:5c:f1:dd, bridge=xenbr0', ] vfb = ["type=vnc,vncunused=1"] #bootloader="/usr/bin/pygrub" kernel = "/boot/vmlinuz-2.6.18-164.6.1.el5xen" ramdisk = "/boot/initrd-2.6.18-164.6.1.el5xen.img" vcpus=1 on_reboot = 'restart' on_crash = 'restart' #root = "/dev/VMM01-KVMvg00/c5root00 ro" #extra = "single selinux=0" extra = "ro" -------------------------------------------------------------------------------- >From the domU instance running on the KVM box: [root@guest02 ~]# cat /etc/fstab /dev/vg00/root / ext3 defaults 1 1 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/vg00/swap swap swap defaults 0 0 [root@guest02 ~]# cat /etc/gr group group- grub.conf -------------------------------------------------------------------------------- [root@guest02 ~]# cat /etc/grub.conf # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/vg00/root divider=10 notsc # initrd /initrd-version.img #boot=/dev/vda default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.18-164.el5) root (hd0,0) kernel /vmlinuz-2.6.18-164.el5 ro root=/dev/vg00/root divider=10 notsc initrd /initrd-2.6.18-164.el5.img title CentOS (2.6.18-128.7.1.el5) root (hd0,0) kernel /vmlinuz-2.6.18-128.7.1.el5 ro root=/dev/vg00/root divider=10 notsc initrd /initrd-2.6.18-128.7.1.el5.img title CentOS (2.6.18-128.4.1.el5) root (hd0,0) kernel /vmlinuz-2.6.18-128.4.1.el5 ro root=/dev/vg00/root divider=10 notsc initrd /initrd-2.6.18-128.4.1.el5.img title CentOS (2.6.18-128.2.1.el5) root (hd0,0) kernel /vmlinuz-2.6.18-128.2.1.el5 ro root=/dev/vg00/root divider=10 notsc initrd /initrd-2.6.18-128.2.1.el5.img title CentOS (2.6.18-128.1.10.el5) root (hd0,0) kernel /vmlinuz-2.6.18-128.1.10.el5 ro root=/dev/vg00/root divider=10 notsc initrd /initrd-2.6.18-128.1.10.el5.img -------------------------------------------------------------------------------- Dom-0 Log files: [root@VMM03-XEN xen]# tail -f /var/log/xen/xend.log [2009-11-06 10:27:26 xend.XendDomainInfo 5112] DEBUG (XendDomainInfo:206) XendDomainInfo.create(['vm', ['name', 'guest02'], ['memory', '1024'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['vcpus', 1], ['image', ['linux', ['kernel', '/boot/vmlinuz-2.6.18-164.6.1.el5xen'], ['ramdisk', '/boot/initrd-2.6.18-164.6.1.el5xen.img'], ['args', 'ro']]], ['device', ['vbd', ['uname', 'phy:/dev/VMM01-KVMvg00/guest02'], ['dev', 'xvda'], ['mode', 'w']]], ['device', ['vif', ['bridge', 'xenbr0'], ['mac', '00:16:3e:5c:f1:dd']]], ['device', ['vkbd']], ['device', ['vfb', ['vncunused', '1'], ['type', 'vnc'], ['xauthority', '/root/.Xauthority']]]]) [2009-11-06 10:27:26 xend.XendDomainInfo 5112] DEBUG (XendDomainInfo:328) parseConfig: config is ['vm', ['name', 'guest02'], ['memory', '1024'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['vcpus', 1], ['image', ['linux', ['kernel', '/boot/vmlinuz-2.6.18-164.6.1.el5xen'], ['ramdisk', '/boot/initrd-2.6.18-164.6.1.el5xen.img'], ['args', 'ro']]], ['device', ['vbd', ['uname', 'phy:/dev/VMM01-KVMvg00/guest02'], ['dev', 'xvda'], ['mode', 'w']]], ['device', ['vif', ['bridge', 'xenbr0'], ['mac', '00:16:3e:5c:f1:dd']]], ['device', ['vkbd']], ['device', ['vfb', ['vncunused', '1'], ['type', 'vnc'], ['xauthority', '/root/.Xauthority']]]] [2009-11-06 10:27:26 xend.XendDomainInfo 5112] DEBUG (XendDomainInfo:445) parseConfig: result is {'features': None, 'image': ['linux', ['kernel', '/boot/vmlinuz-2.6.18-164.6.1.el5xen'], ['ramdisk', '/boot/initrd-2.6.18-164.6.1.el5xen.img'], ['args', 'ro']], 'cpus': None, 'vcpu_avail': None, 'backend': [], 'uuid': None, 'on_reboot': 'restart', 'cpu_weight': None, 'memory': 1024, 'cpu_cap': None, 'localtime': None, 'timer_mode': None, 'start_time': None, 'on_poweroff': None, 'on_crash': 'restart', 'device': [('vbd', ['vbd', ['uname', 'phy:/dev/VMM01-KVMvg00/guest02'], ['dev', 'xvda'], ['mode', 'w']]), ('vif', ['vif', ['bridge', 'xenbr0'], ['mac', '00:16:3e:5c:f1:dd']]), ('vkbd', ['vkbd']), ('vfb', ['vfb', ['vncunused', '1'], ['type', 'vnc'], ['xauthority', '/root/.Xauthority']])], 'bootloader': None, 'maxmem': None, 'shadow_memory': None, 'name': 'guest02', 'bootloader_args': None, 'vcpus': 1, 'cpu': None} [2009-11-06 10:27:26 xend.XendDomainInfo 5112] DEBUG (XendDomainInfo:1774) XendDomainInfo.construct: None [2009-11-06 10:27:26 xend 5112] DEBUG (balloon:145) Balloon: 3145436 KiB free; need 4096; done. [2009-11-06 10:27:26 xend.XendDomainInfo 5112] DEBUG (XendDomainInfo:1900) XendDomainInfo.initDomain: 50 256 [2009-11-06 10:27:26 xend.XendDomainInfo 5112] DEBUG (XendDomainInfo:1941) _initDomain:shadow_memory=0x0, maxmem=0x400, memory=0x400. [2009-11-06 10:27:26 xend 5112] DEBUG (balloon:145) Balloon: 3145436 KiB free; need 1048576; done. [2009-11-06 10:27:26 xend 5112] INFO (image:139) buildDomain os=linux dom=50 vcpus=1 [2009-11-06 10:27:26 xend 5112] DEBUG (image:208) domid = 50 [2009-11-06 10:27:26 xend 5112] DEBUG (image:209) memsize = 1024 [2009-11-06 10:27:26 xend 5112] DEBUG (image:210) image = /boot/vmlinuz-2.6.18-164.6.1.el5xen [2009-11-06 10:27:26 xend 5112] DEBUG (image:211) store_evtchn = 1 [2009-11-06 10:27:26 xend 5112] DEBUG (image:212) console_evtchn = 2 [2009-11-06 10:27:26 xend 5112] DEBUG (image:213) cmdline = ro [2009-11-06 10:27:26 xend 5112] DEBUG (image:214) ramdisk = /boot/initrd-2.6.18-164.6.1.el5xen.img [2009-11-06 10:27:26 xend 5112] DEBUG (image:215) vcpus = 1 [2009-11-06 10:27:26 xend 5112] DEBUG (image:216) features = [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:114) DevController: writing {'protocol': 'x86_32-abi', 'state': '1', 'backend-id': '0', 'backend': '/local/domain/0/backend/vkbd/50/0'} to /local/domain/50/device/vkbd/0. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:116) DevController: writing {'frontend-id': '50', 'domain': 'guest02', 'frontend': '/local/domain/50/device/vkbd/0', 'state': '1', 'online': '1'} to /local/domain/0/backend/vkbd/50/0. [2009-11-06 10:27:26 xend.XendDomainInfo 5112] DEBUG (XendDomainInfo:633) Checking for duplicate for uname: /dev/VMM01-KVMvg00/guest02 [phy:/dev/VMM01-KVMvg00/guest02], dev: xvda, mode: w [2009-11-06 10:27:26 xend 5112] DEBUG (blkif:27) exception looking up device number for xvda: [Errno 2] No such file or directory: '/dev/xvda' [2009-11-06 10:27:26 xend 5112] DEBUG (blkif:27) exception looking up device number for xvda: [Errno 2] No such file or directory: '/dev/xvda' [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:114) DevController: writing {'virtual-device': '51712', 'device-type': 'disk', 'protocol': 'x86_32-abi', 'backend-id': '0', 'state': '1', 'backend': '/local/domain/0/backend/vbd/50/51712'} to /local/domain/50/device/vbd/51712. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:116) DevController: writing {'domain': 'guest02', 'frontend': '/local/domain/50/device/vbd/51712', 'format': 'raw', 'dev': 'xvda', 'state': '1', 'params': '/dev/VMM01-KVMvg00/guest02', 'mode': 'w', 'online': '1', 'frontend-id': '50', 'type': 'phy'} to /local/domain/0/backend/vbd/50/51712. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:114) DevController: writing {'mac': '00:16:3e:5c:f1:dd', 'handle': '0', 'protocol': 'x86_32-abi', 'backend-id': '0', 'state': '1', 'backend': '/local/domain/0/backend/vif/50/0'} to /local/domain/50/device/vif/0. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:116) DevController: writing {'bridge': 'xenbr0', 'domain': 'guest02', 'handle': '0', 'script': '/etc/xen/scripts/vif-bridge', 'state': '1', 'frontend': '/local/domain/50/device/vif/0', 'mac': '00:16:3e:5c:f1:dd', 'online': '1', 'frontend-id': '50'} to /local/domain/0/backend/vif/50/0. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:114) DevController: writing {'protocol': 'x86_32-abi', 'state': '1', 'backend-id': '0', 'backend': '/local/domain/0/backend/vfb/50/0'} to /local/domain/50/device/vfb/0. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:116) DevController: writing {'vncunused': '1', 'domain': 'guest02', 'frontend': '/local/domain/50/device/vfb/0', 'xauthority': '/root/.Xauthority', 'state': '1', 'online': '1', 'frontend-id': '50', 'type': 'vnc'} to /local/domain/0/backend/vfb/50/0. [2009-11-06 10:27:26 xend 5112] DEBUG (vfbif:11) Spawn: ['/usr/lib/xen/bin/qemu-dm', '-M', 'xenpv', '-d', '50', '-domain-name', 'guest02', '-vnc', '127.0.0.1:0', '-vncunused', '-k', 'en-us'] [2009-11-06 10:27:26 xend.XendDomainInfo 5112] DEBUG (XendDomainInfo:992) Storing VM details: {'shadow_memory': '0', 'uuid': '21fa15ea-febf-1cbd-6360-cfa02eb73d8c', 'on_reboot': 'restart', 'start_time': '1257532046.49', 'on_poweroff': 'destroy', 'name': 'guest02', 'xend/restart_count': '0', 'vcpus': '1', 'vcpu_avail': '1', 'memory': '1024', 'on_crash': 'restart', 'image': '(linux (kernel /boot/vmlinuz-2.6.18-164.6.1.el5xen) (ramdisk /boot/initrd-2.6.18-164.6.1.el5xen.img) (args ro))', 'maxmem': '1024'} [2009-11-06 10:27:26 xend.XendDomainInfo 5112] DEBUG (XendDomainInfo:1027) Storing domain details: {'console/ring-ref': '1084703', 'console/port': '2', 'name': 'guest02', 'console/limit': '1048576', 'vm': '/vm/21fa15ea-febf-1cbd-6360-cfa02eb73d8c', 'domid': '50', 'cpu/0/availability': 'online', 'memory/target': '1048576', 'store/ring-ref': '1055232', 'store/port': '1'} [2009-11-06 10:27:26 xend.XendDomainInfo 5112] DEBUG (XendDomainInfo:1249) XendDomainInfo.handleShutdownWatch [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:158) Waiting for devices vif. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:164) Waiting for 0. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vif/50/0/hotplug-status. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vif/50/0/hotplug-status. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:523) hotplugStatusCallback 1. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:158) Waiting for devices usb. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:158) Waiting for devices vbd. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:164) Waiting for 51712. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vbd/50/51712/hotplug-status. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:523) hotplugStatusCallback 1. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:158) Waiting for devices irq. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:158) Waiting for devices vkbd. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:164) Waiting for 0. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vkbd/50/0/hotplug-status. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:523) hotplugStatusCallback 1. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:158) Waiting for devices vfb. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:164) Waiting for 0. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:509) hotplugStatusCallback /local/domain/0/backend/vfb/50/0/hotplug-status. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:523) hotplugStatusCallback 1. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:158) Waiting for devices pci. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:158) Waiting for devices ioports. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:158) Waiting for devices tap. [2009-11-06 10:27:26 xend 5112] DEBUG (DevController:158) Waiting for devices vtpm. [2009-11-06 10:27:26 xend 5112] INFO (XendDomain:387) Domain guest02 (50) unpaused. [root@VMM03-XEN xen]# xm create guest02 ; xm console guest02 Using config file "./guest02". Started domain guest02 Linux version 2.6.18-164.6.1.el5xen (mockbuild(a)builder16.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Tue Nov 3 17:53:47 EST 2009 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000040800000 (usable) 304MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active ACPI in unprivileged domain disabled Built 1 zonelists. Total pages: 264192 Kernel command line: ro Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0750000 soft=c0730000 PID hash table entries: 4096 (order: 12, 16384 bytes) Xen reported: 2992.688 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB disabled vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000 Memory: 1025064k/1056768k available (2162k kernel code, 22592k reserved, 887k data, 176k init, 311304k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 7493.78 BogoMIPS (lpj=14987562) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 13k freed Brought up 1 CPUs checking if image is initramfs... it is Freeing initrd memory: 6980k freed Grant table initialized NET: Registered protocol family 16 Brought up 1 CPUs PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) type=2000 audit(1257533537.470:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API alg: No test for crc32c (crc32c-generic) ksign: Installing public key data Loading keyring - Added public key 5CA5E7AEC7491D45 - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones brd: module loaded Xen virtual console successfully installed as xvc0 Event-channel device installed. Console: switching to colour frame buffer device 100x37 input: Xen Virtual Keyboard/Mouse as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode XENBUS: Device with no driver: device/vbd/51712 XENBUS: Device with no driver: device/vif/0 Initalizing network drop monitor service Freeing unused kernel memory: 176k freed Write protecting the kernel read-only data: 390k USB Universal Host Controller Interface driver v3.0 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) SCSI subsystem initialized megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel(a)redhat.com device-mapper: dm-raid45: initialized v0.2594l ##### using virt-viewer to view the console I see one more line: #### waiting for driver initialization... Grovellingly yours, with bruised forehead -Chris

4 6

Re: [CentOS-virt] Migrating from KVM to XEN - kernel panic
by Christopher G. Stach II 10 Nov '09

10 Nov '09

----- "Christopher Hunt" <dharmachris(a)gmail.com> wrote: > ugh.... after doing inglorious battle, I return. It's definitely > situation (1). The error messages haven't changed. Inside the init > file, should the paths references be from the point of view of Dom0? This is the initrd, running in the context of the guest. dom0 doesn't matter at this point. > lvm vgchange -ay --ignorelockingfailure vg00 > resume /dev/vg00/swap00 If swap00 is the name of the LV for the guest, those look correct. > mkrootdev -t ext3 -o defaults,ro /dev/mapper/vg00-root If "root" is the name of the LV for the guest, that looks okay, too. > Also, should the xen host config file (/etc/xen/guest02) root > parameter point to the dom0 root or the block device for the domU? The guest's. That is basically what would go on the kernel command line, say, in grub.conf. -- Christopher G. Stach II

1 0

Re: [CentOS-virt] Migrating from KVM to XEN - kernel panic
by Christopher G. Stach II 09 Nov '09

09 Nov '09

----- "Christopher G. Stach II" <cgs(a)ldsys.net> wrote: > 1. mkinitrd --with=xenblk --with=xennet --preload=xenblk > --preload=xennet <img> <version> > (yes, that's the original one without the fstab) > 2. gunzip -c /boot/initrd-blah.img > /root/blah > 3. mkdir /mnt/blah > 4. mount -o loop /root/blah /mnt/blah > 5. vi /mnt/blah/init > <change occurrences of dom0 VG to guest VG> > <change dom0 root device name to guest root device name> > 6. umount /mnt/blah > 7. gzip -c /root/blah > /boot/initrd-blah.img If you followed these directions, you're probably scratching your head. I screwed up. The initrd is actually a cpio archive, so: 1. mkinitrd --with=xenblk --with=xennet --preload=xenblk --preload=xennet <img> <version> (yes, that's the original one without the fstab) 2. mkdir /root/initrd-blah 3. cd /root/initrd-blah 4. gunzip -c /boot/initrd-blah.img | cpio -idmv 5. vi /root/initrd-blah/init 6. find . -print | cpio -o | gzip -c > /boot/initrd-blah.img -- Christopher G. Stach II

2 1

Re: [CentOS-virt] Migrating from KVM to XEN - kernel panic
by Christopher G. Stach II 09 Nov '09

09 Nov '09

----- "Christopher Hunt" <dharmachris(a)gmail.com> wrote: > I've updated accordingly, and now am getting a brand new file system > issue: > > > Waiting for driver initialization. > Scanning and configuring dmraid supported devices > Creating root device. > Mounting root filesystem. > mount: could not find filesystem '/dev/root' > Setting up other filesystems. > Setting up new root fs > setuproot: moving /dev failed: No such file or directory > no fstab.sys, mounting internal defaults > setuproot: error mounting /proc: No such file or directory > setuproot: error mounting /sys: No such file or directory > Switching to new root and running init. > unmounting old /dev > unmounting old /proc > unmounting old /sys > switchroot: mount failed: No such file or directory > Kernel panic - not syncing: Attempted to kill init! This could be a couple of things. Is it still displaying the message that it found vg00? If not, (1) it's mkinitrd being stupid and not creating the initrd init script correctly (ignoring LVM initialization when you supply an alternate fstab). If it is starting vg00 properly, it is probably (2) that your root device names are different in dom0 and the guest.' If you have situation 1, you can modify the initrd manually or do a lengthy process with kpartx, yum install kernel-xen, bind mount a bunch of filesystems from dom0, mkinitrd, undo everything, and proceed to the next guest. (It's scriptable, bit still a pain.) Modifying the initrd manually isn't that bad. It basically goes like this: 1. mkinitrd --with=xenblk --with=xennet --preload=xenblk --preload=xennet <img> <version> (yes, that's the original one without the fstab) 2. gunzip -c /boot/initrd-blah.img > /root/blah 3. mkdir /mnt/blah 4. mount -o loop /root/blah /mnt/blah 5. vi /mnt/blah/init <change occurrences of dom0 VG to guest VG> <change dom0 root device name to guest root device name> 6. umount /mnt/blah 7. gzip -c /root/blah > /boot/initrd-blah.img You can keep repeat 4-7 as necessary until it works or you lose it. :) If you don't have situation 1 but you have situation 2, just change the root device name in fstab-domU and rerun the mkinitrd command with the fstab argument. -- Christopher G. Stach II

1 0

Re: [CentOS-virt] Migrating from KVM to XEN - kernel panic
by Christopher G. Stach II 09 Nov '09

09 Nov '09

----- "Christopher Hunt" <dharmachris(a)gmail.com> wrote: > Found volume group "vg00" using metadata type lvm2 ## this is the VG > on the KVM host > Volume group "virt01vg00" not found ## this is the VG on the XEN host mkinitrd is getting this from your dom0's /etc/fstab. sed 's/virt01vg00/vg00/g' /etc/fstab > /tmp/fstab-domU mkinitrd -f --fstab=/tmp/fstab-domU --with=xenblk --with=xennet --preload=xenblk --preload=xennet /boot/initrd-2.6.18-164.6.1.el5xen-domU.img 2.6.18-164.6.1.el5xen Better luck this time. :) -- Christopher G. Stach II

2 1

Re: [CentOS-virt] Migrating from KVM to XEN - kernel panic
by Christopher G. Stach II 09 Nov '09

09 Nov '09

----- "Christopher Hunt" <dharmachris(a)gmail.com> wrote: > This brings me back to suspecting the problem is in the different file > structures. I'm still trying to wrap my head around the other replies > in this thread. mkinitrd in dom0 with xenblk and xennet and use that new initrd for the guests. After you get the guests up and running, install kernel-xen in each one and switch to using pygrub. The following should handle the first part, but no warranties implied. :) mkinitrd --with=xenblk --with=xennet --preload=xenblk --preload=xennet /boot/initrd-2.6.18-164.6.1.el5xen-domU.img 2.6.18-164.6.1.el5xen for i in /etc/xen/guest[0-9]*; do cp ${i} ${i}.bak sed -i '/^ramdisk/cramdisk = "/boot/initrd-2.6.18-164.6.1.el5xen-domU.img"' ${i} done -- Christopher G. Stach II

2 1

Domain0 with Kernel 2.6.18-92.1.22.el5xen fails to boot Guests with Kernel 2.6.18-164.el5xen
by Devraj Mukherjee 09 Nov '09

09 Nov '09

Hi all, I am in a bit of a fix here, I have several Guests paravirtualized running on a Dom0 that is currently running the 2.6.18-92.1.22.el5xen Kernel. All my guests (administered by different people) have subsequently been updated to later versions of the kernel (namely 2.6.18-164.el5xen or 2.6.18-128.4.1.el5xen). Ones that are still running are using the Kernel 2.6.18-128.4.1.el5xen while Dom0 is still booted up into 2.6.18-92.1.22.el5xen I restarted a Guest that's now trying to boot with the 2.6.18-164.el5xen Kernel and it spits out messages like XENBUS: Waiting for devices to initialise: 295s...290s... and eventually reboots. If I try and interrupt the boot and choose a previous version of the Kernel on the Guest, it says the following and fails to boot. The guests use a single disk image that has the SWAP and Root partitions. Is this happening because the version of the kernel on the Dom0 is way too old for guests to boot? I am just a bit hesitant in rebooting my server for the new kernel to take effect unless I am sure :) device-mapper: dm-raid45: initialized v0.2429 Scanning and configuring dmraid supported devices Scanning logical volumes Reading all physical volumes. This may take a while... Activating logical volumes Volume group "VolGroup00" not found Creating root device. Mounting root filesystem. mount: could not find filesystem '/dev/root' Setting up other filesystems. Setting up new root fs setuproot: moving /dev failed: No such file or directory no fstab.sys, mounting internal defaults setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys switchroot: mount failed: No such file or directory Kernel panic - not syncing: Attempted to kill init! -- "The secret impresses no-one, the trick you use it for is everything" - Alfred Borden (The Prestiege)

3 4

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

virt