virt

virt@lists.centos.org

1608 discussions

Xen DomU supoprt in RHEL 7 and the CentOS Plan
by Karanbir Singh 03 Jun '14

03 Jun '14

Hi Guys, so far, in rhel7rc its pretty clear that Xen instances ( domUs ) are not going to boot with the RHEL7rc kernel. Also, i think at this point its a safe bet that these things wont change to GA - no way to accertain that, but its a safe bet ). Wondering if someone has looked into what the challenges might be to enable this support, and then what the options are to deliver this support ? If we can get the stuff staged up, we can work it during the Distro QA stages and target ( potentially ) a in-sync release for Xen support when CentOS7 goes GA - KB -- Karanbir Singh +44-207-0999389 | http://www.karan.org/ | twitter.com/kbsingh GnuPG Key : http://www.karan.org/publickey.asc

13 19

Re: [CentOS-virt] xen setup documentation for centos?
by Scot P. Floess 02 Jun '14

02 Jun '14

Lee, I managed to get this working, but I'm not in front of my computer at the moment. I used KOAN and Cobbler with a few caveats...I'll try to follow up to tomorrow. Sent from my Verizon Wireless 4G LTE Smartphone -------- Original message -------- From: lee <lee(a)yun.yagibdah.de> Date:06/01/2014 8:45 PM (GMT-05:00) To: centos-virt(a)centos.org Subject: [CentOS-virt] xen setup documentation for centos? Hi, what is the proposed way to create domU guests on centos 6.5? At first I tried to follow the documentation on the xen project website which recommends using xl. I created a config file and ended up with getting a message that the kernel is not bootable when trying to create a guest. I also had to stop some daemon (xend?) because it said that xl isn`t compatible with it and the daemon must be stopped first. Then I followed redhat documentation which suggests to use virt-manager --- which doesn`t work because servers don`t have GUIs. So I finally managed to create a guest with virt-install. I can start and stop the guest (which is also running centos), though I don`t think this is the right way to create one. So how exactly are you supposed to create guests? Now I can`t get the networking to work. I`ve been reading lots of documentation and still don`t understand how that is supposed to work. As far as I understand, you get three different network interfaces: dom0: a bridge (virbr0) dom0: a virtual network interface (vifN.X) domU: a virtual network interface which doesn`t appear to be virtual to domU And dom0 keeps it`s own network interface(s), like eth0, which is a physical one. Is vifN.X the same as eth0 in domU? Or what is it for? If it`s the same, is it supposed to have the same IP on both sides? How do I make it so that domU has network access (beyond dom0)? How does this network stuff work? Do the virtual devices have to be in different subnets? When they are not, the network becomes reachable via multiple interfaces, and I`m guessing that either packet loops may be created or some paths might be disabled by STP. Do I have to set up shorewall (or the like) on dom0 to be able to handle network access for guests? Would I need to create a bridge for every guest to be able to handle them separately for firewalling purposes because otherwise packets circumvent firewall rules by directly going over the bridge? If so, why are bridges needed? I would understand doing things like adding those guests that are visible to the LAN only to the same bridge to have them all reachable likewise. When doing that, it would seem to make sense to use a different subnet for guests in the DMZ. All the documentation tells you many different things, none of them work and it`s totally confusing. Is there any /good/ documentation somewhere? -- Knowledge is volatile and fluid. Software is power. _______________________________________________ CentOS-virt mailing list CentOS-virt(a)centos.org http://lists.centos.org/mailman/listinfo/centos-virt

1 0

Xen and Centos 6.5
by Steve Campbell 22 May '14

22 May '14

What exactly is the status of Xen and Centos 6.5? Is it available to install and run on production machines? I find a lot of how-to methods for installation on google, but is there a standard recommended way to install this according to the Centos folk? steve campbell

4 3

Today's VIRT SIG minutes
by Lars Kurth 20 May '14

20 May '14

Hi all, I updated http://wiki.centos.org/SpecialInterestGroup/Virtualization/Status and tracked meeting minutes at http://wiki.centos.org/SpecialInterestGroup/Virtualization/2014-May20-notes Lars

1 0

Call for agenda items for tomorrow's VIRT SIG meeting
by Lars Kurth 20 May '14

20 May '14

Hi all, please reply to this thread of you have any agenda items that you would like to add. Meeting minutes of past minutes are under * http://wiki.centos.org/SpecialInterestGroup/Virtualization "Meetings" * The TODO list is under http://wiki.centos.org/SpecialInterestGroup/Virtualization/Status (just updated it) * Draft roadmap is under "Roadmap" and probably needs formalizing Lars

4 5

Re: [CentOS-virt] Call for agenda items for tomorrow's VIRT SIG meeting
by Lars Kurth 20 May '14

20 May '14

No, it isn't. I think we should go through * Round the call for any additional agenda items * Action Updates * Bug tracker * RPM subpackage structure Lars On 20/05/2014 12:02, Jonathan Ludlam wrote: > If it's not too late to add agenda items now, could we talk about the structure of the RPM subpackages? > > In particular, some folks here at Citrix have spent some time fixing up our xen RPM such that the subpackages have a more useful split - for example, there is a now distinction between xen-libs and xen-dom0-libs - where the former has libraries useful in all domains, e.g. libxenstore and libvchan, and the latter has libraries that are _only_ useful for dom0. There are a few other changes that have been made, and I was wondering what the appetite was for convergence, and where the problems will lie if we were to pursue this. > > Thanks, > > Jon > > > > ________________________________________ > From: centos-virt-bounces(a)centos.org [centos-virt-bounces(a)centos.org] on behalf of Lars Kurth [lars.kurth(a)xen.org] > Sent: 19 May 2014 07:35 > To: Discussion about the virtualization on CentOS > Subject: [CentOS-virt] Call for agenda items for tomorrow's VIRT SIG meeting > > Hi all, > please reply to this thread of you have any agenda items that you would > like to add. Meeting minutes of past minutes are under > * http://wiki.centos.org/SpecialInterestGroup/Virtualization "Meetings" > * The TODO list is under > http://wiki.centos.org/SpecialInterestGroup/Virtualization/Status (just > updated it) > * Draft roadmap is under "Roadmap" and probably needs formalizing > Lars > > _______________________________________________ > CentOS-virt mailing list > CentOS-virt(a)centos.org > http://lists.centos.org/mailman/listinfo/centos-virt

1 0

RFC: Use git am for patchqueue
by George Dunlap 20 May '14

20 May '14

OK, I've got a basic initial port of the xen package up to 4.4.0. But before I post that, I wanted to get comments on a new method of managing the Xen part of the patchqueue. You can find the RFC branch here: repo: http://github.com/gwd/sig-virt-xen branch: out/git-am-patchqueue-RFC-v1 The basic idea is to put as much as possible into a 'git am' file. This file can easily be imported into git on top of a Xen git repository with "git am [filename]", rebased / edited like any branch, and the exported again with "git format-patch -N --stdout [release-tag]". I've got a copy of the Xen repo with the patchqueue applied as a branch here: repo: http://github.com/gwd/xen branch: centos/pq/4.2.4-v1 Unfortunately this only works for patches to things in the core Xen repo; patches to qemu, or the out-of-tree blktap will need to be managed separately still. However, at the moment those patches are kind of small. Having the patchqueue in this format made rebasing to 4.4 a *lot* easier. Any thoughts? -George

2 2

Bug system?
by Konrad Rzeszutek Wilk 20 May '14

20 May '14

Hey, For the kernel and hypervisor related issues I would ask that I get copied (or the other Linux Xen maintainers). But I am unclear what the bug system is - if any - so that I can create an account on it? Thanks!

4 5

Xen4CentOS: Unnecessary gpxe / ipxe obsoletes
by George Dunlap 20 May '14

20 May '14

I installed CentOS6 with the xen4centos set of packages; then I tried to install KVM (for performance comparison), I got the following error in YUM: --> Processing Dependency: /usr/share/gpxe/e1000-0x100e.rom for package: 2:qemu-kvm-0.12.1.2-2.415.el6_5.4.x86_64 Package gpxe-roms-qemu is obsoleted by ipxe-roms-qemu, but obsoleting package does not provide for requirements I manually downloaded the gpxe package and installed it with no problems, so there are no actual conflicts in the files. Thus, ipxe probably *shouldn't* obsolete gpxe -- there are no conflicts between the two, and ipxe doesn't provide what gpxe does. If I had already installed KVM, and was toying with the idea of giving Xen a spin, this may have been enough to deter me. I checked with the XenServer guys, and their version of ipxe doesn't obsolete gpxe; so that must have been something that was introduced in CentOS. -George

4 11

Mailing list policy
by Lars Kurth 19 May '14

19 May '14

Hi all, right now the centos-virt(a)centos.org mailing list is set up such that all posts by people not subscribed to the list are auto-discarded. This is in line with all the other lists and I propose that we keep things as they are. The reason for this is that traditionally the amount of spam that centos lists are getting was very high. I am not sure this holds for centos-virt(a)centos.org. It may be worth trying a change to see whether it would be manageable to use moderation of posts by people not subscribed to the list. Input very welcome Regards Lars

4 6

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

virt