virt

virt@lists.centos.org

1612 discussions

Moving vmware guests to a CentOS KVM server
by carlopmart 24 Feb '10

24 Feb '10

Hi all, I need to move ten CentOS/RHEL 5.4 vmware guests from a vmware ESXi 4 host to a CentOS 5.4 KVM host (fully patched). But I have two doubts. First: all these guests have two e1000 network drivers defined as a eth0,eth1 and modprobe.conf file is the same on all: alias eth0 e1000 alias eth1 e1000 alias net-pf-10 off options ipv6 disable=1 Can I change e1000 driver to virtio_net driver without problems and then update kernel??? Second doubt: all MAC address are defined with vmware range (00:50:56:XX:XX:XX) and I have configured all with HWADDR option under ifcfg-ethX files. Do I need to change all MAC address to KVM range or can I keep vmware range?? I don't need to convert virtual disks because all these guests are installed on an iSCSI luns under Solaris/ZFS servers ... Many thanks. -- CL Martinez carlopmart {at} gmail {d0t} com

4 6

Boot delay and startup order for KVM guests
by carlopmart 23 Feb '10

23 Feb '10

Hi all, Finally, I have migrated my rhel/centos guests from vmware to kvm server using virtio drivers without problems. But I need to startup these guests using certain order and assign boot delays. How can I do this?? Does kvm provides some type of tool to do it?? Or do I need to create virsh scripts to do it?? I have tried autostart option from libvirt but starts all guests at the same time. Thanks. -- CL Martinez carlopmart {at} gmail {d0t} com

3 4

Dynamically add virtio storage to guests via libvirt and KVM?
by Steven Ellis 22 Feb '10

22 Feb '10

Is this actually possible with KVM on Centos 5.4? I'd like to be able to grow the storage of a virtualised database server as required. Both the base server and virtual guest are running Centos 5.4 I've tried adding the storage but it doesn't appear until reboot. I can't force a scsi device scan as there are no entries under /sys/class/scsi_* Any ideas? Steve

1 0

Fedora 12 domU will not boot kernel
by Tait Clarridge 21 Feb '10

21 Feb '10

Hello Everyone, I have been trying to get a Fedora 12 domU to boot for the better part of the afternoon and haven't had success booting any F12 kernel in Xen. I can get Fedora 11 installed no problem, tried to do a preupgrade but the when booting the preupgrade kernel through grub (or even from outside the domU) the domU reboots very quickly and ultimately crashes. As far as I saw in the qemu-dm-xxx.log, xend.log, and xend-debug.log there are no messages informing me of what went wrong. I am using CentOS 5.3 with the 2.6.18-92.1.22.el5xen kernel. I am unable to update the kernel at this time as new drivers cause major disk controller issues. If it as simple as a kernel update I will try again, but as of right now I am stumped so I asking for a little help! Has anyone successfully gotten F12 set as a domU using the regular CentOS xen and kernel-xen packages? xen-3.0.3-80.el5_3.3 kernel-xen-2.6.18-92.1.22.el5 Best, Tait

4 11

Mounting LVM contained ntfs systems.
by Ben M. 20 Feb '10

20 Feb '10

Using CentOS 5.4 Xen Virtualization "stock install" Added rpmforge NTFS extension for mount command. Scenario: Have mirror dd'd off to "backup" unmounted LV contained Windows machine. Within the LVM volume are two NTFS partitions formatted by Win2k8. Issue: How can I mount this? I need to verify file existence and run batch of file compare checks. If I try to mount the LV: ~~~~~~~~~~~~~ [root@vm1 ~]# mount -t ntfs /dev/thisvg00/thisw2kwe-b4change /mnt/ntfs NTFS signature is missing. Failed to mount '/dev/mapper/serv1vg00-w2kwe--b4cert': Invalid argument The device '/dev/mapper/serv1vg00-w2kwe--b4cert' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? ~~~~~~~~~~~~~ Would I have had an easier situation if I just had made one big C: partition instead of two (1 for OS and progs, other for data and applications)?

2 2

Which driver interface do I need to install Windows 2008 R2 as a KVM guest?
by carlopmart 17 Feb '10

17 Feb '10

Hi all, With the latest kvm updates, somebody have tried to install windows 2008 R2/windows 7 as a kvm guest using e1000 or virtio net driver?? Works with the windows installer?? Thanks. -- CL Martinez carlopmart {at} gmail {d0t} com

3 4

bridged kvm guest and ever changing MAC address
by Veiko Kukk 16 Feb '10

16 Feb '10

Hi, Centos 5.4, dual igb ethernet, kvm guest (Centos 5.4). br0 is connected to eth0, guest has virtio ethernet connected to br0. Guest is configured using virt-manager. When host is booting, br0 gets mac address of eth0. Every time i start guest (with virt-manager) vnet0 appears and br0 mac aadressi on host is changed. Why does it need to change the mac? I'd like to keep it same, not to change it every time guest is booting. -- Veiko

2 3

Install CentOS boot from iSCSI with Virtualization: could not get boot entry
by Bart Heinsius 13 Feb '10

13 Feb '10

Hi, I'm installing CentOS 5.4 on an iSCSI disk. When I choose to install the Server component only, the system boots perfectly from the iSCSI disk. When I choose to install the Server and the Virtualization components, it looks like the lvm root partition can't be mounted, I get the message: iscsistart: could not get boot entry Can't the Xen kernel boot from iSCSI? -Bart

1 0

KVM - restart of VMs after rejoin a node into cluster
by Ingmar 11 Feb '10

11 Feb '10

Hi, I have the following problem ... I have a cluster with 2 nodes and use the Vrtualisierung KVM (83-105.el5_4.22) on CentOS 5.4 (x64 - 2.6.18-164.6.1.el5) with drbd 8.3.6. For the cluster, I use the following software tools: - heartbeat (3.0.1) - pacemaker (1.0.7) and - libvirt (0.6.3). If a node has been switched off or he was placed on standby and I activate it again, all VMs will be restarted (reboot) after the 2nd Node is online and active. Is this a known problem? Does anyone know where the bug is? Is there a solution for this? regards

1 0

Enabling KSM with ksmctl under Centos 5.4
by Steven Ellis 11 Feb '10

11 Feb '10

Are their any good guides out there on how to use ksmctl to enable and tune KSM performance on Centos/RedHat At the moment the only guidelines I can find are from the following OLS paper, plus the Linux Kernel Docs. * http://www.kernel.org/doc/ols/2009/ols2009-pages-19-28.pdf * http://www.kernel.org/doc/Documentation/vm/ksm.txt On a basic dual core testbed with 4GB Ram and 4-5 VMs I've tried ksmctl start 60 5000 This resulted in a 5% system cpu load as it tried to recover shared space. Sadly I can't tell how well it is working as we don't have /sys/kernel/mm/ksm support in Centos. Has anyone got some guidelines on how to relate number of pages + interval to number of CPUs and Ram. Cheers Steve -- Bulletin.net <http://www.bulletin.net/> *Steven Ellis - Director of Worldwide Engineering,* *Bulletin.Net Inc* - http://www.bulletin.net/ *Ph* +64 9 307 1146 *Fax* +64 9 307 1148 *Mo* +64 21 321 673

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

virt