virt

virt@lists.centos.org

2 participants
1612 discussions

rhel7beta1 kernel and xen dom0
by Karanbir Singh 20 Dec '13

20 Dec '13

hi who wants to have a stab at the rhel7beta1 kernel ( 3.10 based ) to see what is needed to enable dom0 support ? I suspect it wont be much, but is merely a suspicion. regards, -- Karanbir Singh +44-207-0999389 | http://www.karan.org/ | twitter.com/kbsingh GnuPG Key : http://www.karan.org/publickey.asc

3 4

Patch for domU packet loss
by Vasily Evseenko 15 Dec '13

15 Dec '13

Hi, I've found that dom0 <-> domU begin loss ~ 20% packets on high UDP traffic (with bridged virtual network setup). The fix is to increase txqueuelen on vif* interfaces which is very low (32) by default. Tested with Centos 6.5, 3.10.23-11.el6.centos.alt.x86_64 xen-4.2.3-26.el6.centos.alt P.S. This problem widely discussed in the internet, but nobody publish this fix (why?) http://serverfault.com/questions/442674/xen-pv-packet-loss http://lists.xen.org/archives/html/xen-users/2009-01/msg00381.html ...

1 0

What do you use to provision domU's?
by Kenneth Porter 11 Dec '13

11 Dec '13

The subject says it all. I got CentOS 6.4 installed and then converted it to boot into the Xen kernel, using the C6.4 system as its dom0. But now I'm uncertain how to put a C6.4 domU on the result. Which tools are recommended?

5 9

Re: [CentOS-virt] CentOS-virt Digest, Vol 76, Issue 3
by Hamond, Jean-Paul van 06 Dec '13

06 Dec '13

R Verzonden met mijn Windows Phone ________________________________ Van: centos-virt-request(a)centos.org<mailto:centos-virt-request@centos.org> Verzonden: ‎6-‎12-‎2013 09:35 Aan: centos-virt(a)centos.org<mailto:centos-virt@centos.org> Onderwerp: CentOS-virt Digest, Vol 76, Issue 3 Send CentOS-virt mailing list submissions to centos-virt(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-virt or, via email, send a message with subject or body 'help' to centos-virt-request(a)centos.org You can reach the person managing the list at centos-virt-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-virt digest..." Today's Topics: 1. Re: What do you use to provision domU's? (Johnny Hughes) 2. Re: What do you use to provision domU's? (Johnny Hughes) 3. Re: What do you use to provision domU's? (Dusty Mabe) 4. Re: What do you use to provision domU's? (Johnny Hughes) 5. Re: What do you use to provision domU's? (Kenneth Porter) ---------------------------------------------------------------------- Message: 1 Date: Tue, 03 Dec 2013 17:31:38 -0600 From: Johnny Hughes <johnny(a)centos.org> Subject: Re: [CentOS-virt] What do you use to provision domU's? To: centos-virt(a)centos.org Message-ID: <529E69DA.4030709(a)centos.org> Content-Type: text/plain; charset="iso-8859-1" On 12/02/2013 12:32 AM, Kenneth Porter wrote: > The subject says it all. I got CentOS 6.4 installed and then converted it > to boot into the Xen kernel, using the C6.4 system as its dom0. But now I'm > uncertain how to put a C6.4 domU on the result. Which tools are recommended? You can use virt-manager either from the Dom0 server (if it has all the GUI stuff and virt-manger installed) ... OR ... by connecting to the Dom0 using virt-manager from a Linux workstation. See my xen4centos libvirt article here: http://wiki.centos.org/HowTos/Xen/Xen4QuickStart/Xen4Libvirt You can also use Xen XM tools with the default install ... OR ... if you do not plan on using libvirt at all, you can setup and use Xen XL tools (if using libvirt, you have to use xend and Xen XM): XM Tools: http://wiki.xen.org/wiki/XM XL Tools: http://wiki.xen.org/wiki/XL Thanks, Johnny Hughes

1 0

Official AWS Centos AMI and new instance types
by Luis Fernando Alen 02 Dec '13

02 Dec '13

Hello, list. Yesterday I tried changing the instance type of my c1.medium instances on AWS to c3.large and I wasn't able to do so. It looks like the official Centos AMI on market place is still not ready for c3.large. This is the error message I received: "The instance configuration for this AWS Marketplace product is not supported. Please see http://aws.amazon.com/marketplace/pp?sku=7w73f3vx0zywcfq1izrshkpjl for more information about supported instance types, regions, and operating systems." c3.large provides a huge balance improvement when it comes to cost X benefits. This instance has almost the same price of the old c1.medium ($ 0.150 vs $ 0.145 / hourly) and has more CPU power and double memory (7 ECUs and 3.7G). Given that fact, I believe we'll have lots of people switching from c1.medium to c3.large soon and therefore it'd be wise to have the official AMI ready. Besides c3.large, Amazon has released several new instance types and according to their market place info, I believe that the official AMI is not ready for those as well. Is it possible to get it ready? Thank you.

1 1

Fwd: bnx2x driver in Xen4 kernel
by Dusty Mabe 02 Dec '13

02 Dec '13

Hi, After following the instructions here http://wiki.centos.org/HowTos/Xen/Xen4QuickStart and installing the kernel from Xen4 CentOS project (kernel-3.4.61-9.el6.centos.alt.x86_64) I can't use any networking because the firmware for my NIC is not available: Bringing up interface eth0.3: bnx2x 0000:02:00.0: firmware: requesting bnx2x/bnx2x-e1h-7.2.51.0.fw bnx2x: [bnx2x_init_firmware:11696(eth0)]Can't load firmware file bnx2x/bnx2x-e1h-7.2.51.0.fw bnx2x: [bnx2x_func_hw_init:5476(eth0)]Error loading firmware bnx2x: [bnx2x_nic_load:2118(eth0)]HW init failed, aborting This seems similar to http://bugs.centos.org/view.php?id=6513 . Is this a bug? Is this a known issue? Thanks, Dusty

4 10

Hot adding USB devices to guests at a fixed address
by Stephen Harris 27 Nov '13

27 Nov '13

I have a device I want a guest to see. I've configured the following: % cat /etc/libvirt/HotPlug/owon.xml <hostdev mode='subsystem' type='usb'> <source> <vendor id='0x5345'/> <product id='0x1234'/> </source> </hostdev> And then in udev: % cat /etc/udev/rules.d/90-owon.rules ACTION=="add", \ SUBSYSTEM=="usb", \ SYSFS{idVendor}=="5345", \ SYSFS{idProduct}=="1234", \ RUN+="/usr/bin/virsh attach-device XP_VM1 /etc/libvirt/HotPlug/owon.xml" ACTION=="remove", \ SUBSYSTEM=="usb", \ SYSFS{idVendor}=="5345", \ SYSFS{idProduct}=="1234", \ RUN+="/usr/bin/virsh detach-device XP_VM1 /etc/libvirt/HotPlug/owon.xml" Now this works; I plug the device in and the guest sees it. The problem is that, each time, it shows up at a different address on the guest's USB bus. And, Windows XP being Windows, this means it asks to load a device driver each and every time (I've never understood why Windows wants to load a new device driver just because you plug a device into a different port). Does anyone know of a way of adding a device so that it's at a known fixed address inside the guest? -- rgds Stephen

2 2

Cannot start CentOS after installing the latest Xen4 with kernel 3.10.20
by Токарев Вячеслав 27 Nov '13

27 Nov '13

Hello. I'm installing the latest version of XEN to CentOS 6.4 machine. XEN version: 4.2.3-25.el6.centos.alt kernel: 3.10.20-11.el6.centos.alt When I reboot, many messages appears on the screen, indication the loading of XEN and then.. just a black screen. Several days ago I successfully installed XEN on another machine, but that was XEN 4.2.3-23 and kernel 3.4.68-9. And now, after the new version is released, it stopped working.. Also if I try to load a new kernel without XEN - it works perfectly. Please help me find out what's wrong with the new XEN kernel and how to fix it. Thanks.

3 5

CPU and memory allocation
by Mohit 27 Nov '13

27 Nov '13

Hi, How does cpu and memory allocation works in KVM, If your total vm's on a certain hyp are alloted more RAM and CPU then total physically available CPU-Cores and RAM -- Ericsson Signature line *Mohit Kumar* * Back Office* Ericsson India Global Services Pvt. Ltd BUGS-GSC, Back Office A-8, Tower- A, 3rd Floor, Knowledge Boulevard, Sector-62, Noida, Uttar Pradesh-201301, India mohit.m.kumar(a)ericsson.com www.ericsson.com http://www.ericsson.com/current_campaign <http://www.ericsson.com/current_campaign> This Communication is Confidential. We only send and receive email on the basis of the terms set out at www.ericsson.com/email_disclaimer <http://www.ericsson.com/email_disclaimer>

1 0

Does official oVirt releases works under CentOS 6.x??
by C. L. Martinez 27 Nov '13

27 Nov '13

Hi all, I would like to install oVirt under centos 6.4 to manage my 5 kvm hosts (centos based also), but all info that I have found it is bit confused. Does official oVirt releases works under CentOS 6.x or not for the node and the management server?? Or only official release for CentOS is http://dev.centos.org/centos/6/ovirt/ (a really bit older)?? .. Thanks.

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

virt