virt

virt@lists.centos.org

2 participants
1612 discussions

CentOS-6 KVM virt-manager will not shutdown guest
by James B. Byrne 07 Sep '11

07 Sep '11

I have a CentOS-6 guest VM configured on a CentOS-6 host. If I run virt-manager then I can start the guest VM but once it is running I cannot get a shutdown command to have effect. To shutdown the running guest I either must select Force Off from the Shut Down menu or open the guest console and issue shutdown from the command line. Is there some setting that is required to have Shut Down have effect when issued from within virt-manager? is this a bug or a configuration problem? When I issue the shutdown command to the guest then there is no entry made in /var/log/messages. It just has no effect. However, if I issue a reboot command from the same menu then I get an error: libvirtd: 16:43:51.027: error: VirLibConnError 450 : this function is not supported by the connection driver: virDominReboot Am I to infer that Reboot and Shutdown options actually are not available to use from the virt-manager Shut Down menu, notwithstanding that they are present? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

P2V of NEtware 3.12 working server to Centos >=5.x
by Rajagopal Swaminathan 07 Sep '11

07 Sep '11

Greetings, I would be grateful if anybody can kindly give a pointer to port a Working netware 3.12 server using Centos >=5.x KVM howto? -- Regards, Rajagopal

2 3

Network configuration on KVMs
by James B. Byrne 02 Sep '11

02 Sep '11

In the Redhat EL6 virtualization guide ( http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Virtualiz… ) I read this: # Configure iptables Configure iptables to allow all traffic to be forwarded across the bridge. # iptables -I FORWARD -m physdev --physdev-is-bridged -j ACCEPT # service iptables save # service iptables restart Disable iptables on bridges Alternatively, prevent bridged traffic from being processed by iptables rules. In /etc/sysctl.conf append the following lines: net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 Reload the kernel parameters configured with sysctl. # sysctl -p /etc/sysctl.conf However, later in the same guide ( http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Virtualiz… ) I read this: * Enabling IP forwarding (net.ipv4.ip_forward = 1) is also required for shared bridges and the default bridge. Note that installing libvirt enables this variable so it will be enabled when the virtualization packages are installed unless it was manually disabled. Note Note that enabling IP forwarding is not required for physical bridge devices. When a guest is connected through a physical bridge, traffic only operates at a level that does not require IP configuration such as IP forwarding. Which leaves me a little confused. Is this talking about some form of network device other than the installed NIC? How is this information integrated with the requirement given in section 10.3? Can someone explain to me how these two sections relate to one another? A second difficulty I encounter is that the first vm guest that I created does not seem to have any interface configuration file for etho in /etc/sysconfig/network-scripts. In fact, I see no ifcfg-x files at all. Am I supposed to create these by hand or have I somehow missed a configuration step in virt-manager? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

cloudstack - http://cloudstack.org
by Ian B 01 Sep '11

01 Sep '11

Citrix have open sourced their recently acquired cloud management platform 'Cloudstack'. It apparently supports multiple hypervisors: Xen, KVM, Vmware ESXi The install guide is worth a read even if you're not considering installing it as it goes over some 'best practice' config for storage, networking setup etc. http://download.cloud.com/releases/2.2.0/CloudStack2.2.9InstallGuide.pdf Just wondering if anyone has any experience with it? - Ian

2 1

Centos-6, LVM and KVM guest image
by James B. Byrne 30 Aug '11

30 Aug '11

CentOS-6.0 I created an lv (120 Gb) to hold the image of a KVM guest instance. I mounted this at /var/lib/libvirt/images/lv_guest01. When I do a df I see the lv is mounted at the desired location. When I run the virtual machine manager from the desktop I am given the option to install the image into the root directory tree or to browse for an alternative location. When I browse to the mount point of the lv then the virtual machine manger becomes non-responsive and I get a swirling circular pattern in the right hand pane of the file browser. In CentOS-5.6 I was able to create and mount new lvs and then install kvm guests into them through the virtual machine manager. On CentOS-6, even though I added an lv containing 120Gb I am only given the option to create a new volume in the original root location, which itself is a lv, albeit of just 64 Gb. I do not see the additional storage. What step am I missing here? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 1

compress raw image
by Rainer Traut 22 Aug '11

22 Aug '11

Hi, I need to transfer a local raw image to another datacenter. Is there a way to achieve good compression of this image, I heard of tools overwriting unused space with zeros. Is this a good idea? It's an W2k8 image/NTFS. Thx Rainer

9 9

small cloud interface : http://karesansui-project.info/
by Karanbir Singh 20 Aug '11

20 Aug '11

hi guys, just wondering if anyone had feedback about this project : http://karesansui-project.info/ ; I had a go at setting it up, and it took about 5 minutes to get going and be productive. their installer is extremely odd, its a tarball with RPMS ( although they do provide a yum repo as well ). And its based on CentOS ( hardwired version numbers from centos-5.3 to 5.5 - does not seem to like 5.6 unless you change their detection string, not sure why ). - KB

4 4

profiling KVM i/o on CentOS 5
by Nick 18 Aug '11

18 Aug '11

Hi, I am wondering what tools are available to troubleshoot KVM I/O problems on CentOS 5, given that the kernel is 2.6.18 with some backports to support virtualisation? kvm_stat / kvmtrace - These seem to be available in the kvm-tools package. ftrace related things seem not to be available. OProfile is available, can it be used? Also, SystemTap is available, can it be used? Anything else? I don't currently have any experience using any of those, except for a brief experiment with OProfile, but my impression is that it's more of an event-counting tool - I'm not sure it can time function call execution times. Which makes me think SystemTap is better suited. However, this reference [1] makes me wonder if it can only be used with QEMU/KVM CentOS 6. Has anyone any experience or prior art they can share or reference, specifically with profiling virtio_blk? Thanks, Nick 1. > BZ#632722 - This update introduces support for tracing of events within QEMU; > the tracing is similar in its style to DTrace. When used in conjunction with > SystemTap, it is now possible to trace internal QEMU events such as I/O > operations and memory allocations http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/6.1_Techn…

1 0

(no subject)
by Wendy William 18 Aug '11

18 Aug '11

http://www.kiyamato.com/irewin/catalog/images/work.php?html115

3 3

lvm and kvm
by James B. Byrne 15 Aug '11

15 Aug '11

I am performing some configuration testing on a kvm host. When installing a guest operating system is it advisable to place each instance in a separate lv or better to accept the default and store them on the root file system? Respecting lvm, does one configure lvs in a virtual server to take space from the main vg or does one allocate lv space from inside that allocated to the virtual instance? Is it even considered advisable to use lvs with virtual guests? To give an example, if I were to configure an smtp server on bare metal I might use the following disk layout: vg_bare 500Gb / lv_root 8Gb /boot lv_boot 1Gb /tmp lv_tmp 8Gb /var/log lv_log 8Gb /var/spool/mail lv_mail 16Gb In a kvm setup, if I wish to do this, would I first create an lv just to host the virtual image and then assign lv s from the space allocated to that image file? vg_bare 500Gb / lv_root 8Gb /boot lv_boot 1Gb /tmp lv_tmp 8Gb /var/log lv_log 8G /var/lib/libvirt/images/lv_virt01 32Gb /var/lib/libvirt/images/lv_virt02 32Gb . . . and so forth? Or is it worth the bother to have lv s in a virtual host? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

3 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

virt