On 01/26/2017 09:32 AM, Johnny Hughes wrote:
On 01/25/2017 11:49 AM, Kevin Stange wrote:
On 01/24/2017 11:16 AM, Kevin Stange wrote:
On 01/24/2017 09:10 AM, Konrad Rzeszutek Wilk wrote:
On Tue, Jan 24, 2017 at 09:29:39PM +0800, -=X.L.O.R.D=- wrote:
Kevin Stange, It can be either kernel or update the NIC driver or firmware of the NIC card. Hope that helps!
Xlord -----Original Message----- From: CentOS-virt [mailto:centos-virt-bounces@centos.org] On Behalf Of Kevin Stange Sent: Tuesday, January 24, 2017 1:04 AM To: centos-virt@centos.org Subject: [CentOS-virt] NIC Stability Problems Under Xen 4.4 / CentOS 6 / Linux 3.18
<snip> >> >> Has anyone experienced similar issues with this configuration, and if so, >> does anyone have tips on how to resolve the issues? > > Honeslty I would email Intel and see if they can help. This looks like > the NIC decides something is wrong, throws off an PCIe error and > then resets itself.
This happens for several different NICs. Is there a good contact at Intel for this kind of thing, or should I just try to reach them through their web site?
It could also be an error in the Linux stack which would "eat" an interrupt when migrating interrupts (which was fixed upstream, see below). Are you running irqbalance? Could you try turning it off?
irqbalance is enabled on these servers. I'll try disabling it.
I had stopped irqbalance yesterday afternoon, but had a hypervisor's NICs fail anyway in early morning this morning, so I'm pretty sure this is not the right tree to bark up.
Here is a set of drivers/fireware from Intel for those NICs:
https://downloadcenter.intel.com/download/15817/Intel-Network-Adapter-Driver...
I will see if I can get a CentOS-6 build of the latest version of that from our older SRPM:
http://vault.centos.org/6.7/xen4/Source/SPackages/e1000e-2.5.4-3.10.68.2.el6...
I am currently very busy with several c5, c6, c7 updates and the i686 altarch c7 tree .. but I have this on my list. In the meantime, maybe someone else could also see if those drivers help you (or you could try to compile / install it).
Do you have another machine that you can use to see if you can duplicate the issue NOT running the xen.gz hypervisor boot, but just the straight kernel?
Actually .. I think this is the driver for you:
https://downloadcenter.intel.com/download/13663
And this explains how to make it work:
http://www.intel.com/content/www/us/en/support/network-and-i-o/ethernet-prod...