Forgot to mention it, but yes, I edited /etc/modprobe.conf.
BTW, I can make the bridge working alone, and the bonding alone also ; but not together.
On Fri, 2008-10-24 at 09:25 -0400, Roy Firestein wrote:
Did you also edit the modprobe.conf file? Here is a good guide: http://wiki.centos.org/TipsAndTricks/BondingInterfaces
Good luck, Roy Firestein
----- Original Message ----- From: "Mickaël Canévet" canevet@embl.fr To: centos-virt@centos.org Sent: Friday, October 24, 2008 3:47:36 AM GMT -05:00 US/Canada Eastern Subject: [CentOS-virt] bonding over bridge or bridge over bonding ?
Hi,
I'm trying to configure a network bridge over a bonding without any success. Here is my configuration:
ifcfg-eth0:
DEVICE=eth0 HWADDR=00:1E:C9:E8:3F:E5 ONBOOT=yes USERCTL=no MASTER=bond0 SLAVE=yes
ifcfg-eth1:
DEVICE=eth1 HWADDR=00:1E:C9:E8:3F:E7 ONBOOT=yes USERCTL=no MASTER=bond0 SLAVE=yes
ifcfg-bond0:
DEVICE=bond0 ONBOOT=yes BRIDGE=br0 USERCTL=no
ifcfg-bridge0:
DEVICE=br0 TYPE=Bridge BOOTPROTO=static IPADDR=192.168.52.55 NETMASK=255.255.255.0 NETWORK=192.168.52.0 BROADCAST=192.168.52.255 ONBOOT=yes DELAY=0
eth0 and eth1 don't goes up...
Am I doing something wrong ? Shouldn't I trying to do a bonding over 2 bridges ?
Do anybody already tried such a configuration with success ?
Thanks