On Sun, 2007-12-09 at 00:25 -0600, Christopher G. Stach II wrote:
Timothy Selivanow wrote:
I'm seeing an issue with xend not running a custom network script automatically, but works when I run it manually. In /etc/xen/xend-config.sxp I've changed:
(network-script network-bridge)
TO: (network-script network-custom)
I've found that configuring the bridges using the Red Hat method (/etc/sysconfig/network-scripts) is easier and more straightforward than finagling around in the Xen scripts. Then you just disable Xen's method with ``(network-script /bin/true)''. The great thing about this is that you can handle bonding, VLANs, and bridges all in the same spot and at the same time.
Example bridge interface /etc/sysconfig/network-scripts/ifcfg-xenbr0:
DEVICE=xenbr0 TYPE=Bridge BOOTPROTO=none NETWORK=192.168.0.0 NETMASK=255.255.255.0 IPADDR=192.168.0.1 ONBOOT=yes DELAY=0 STP=on
Example bridge port interface /etc/sysconfig/network-scripts/ifcfg-eth0:
DEVICE=eth0 BOOTPROTO=none ONBOOT=yes USERCTL=no BRIDGE=xenbr0
Here is /etc/xen/scripts/network-custom:
# !/bin/bash # network-custom
Maybe your shebang is busted?
Doh! That was it. "Given enough eyeballs, all bugs are shallow." -- even configuration issues :)
Thanks, I can't believe it was that this entire time...
--Tim ____________________________________________________________________ / Plastic... Aluminum... These are the inheritors of the Universe! \ | Flesh and Blood have had their day... and that day is past! | \ -- Green Lantern Comics / -------------------------------------------------------------------- \ \ \ \ /\ ( ) .( o ).