----- "Tait Clarridge" tait@clarridge.ca wrote:
Interesting, thanks for the info. Can I specify which VLANs it is going to configure and bridge?
Example bridge interface:
/etc/sysconfig/network-scripts/ifcfg-br10: DEVICE=br10 TYPE=Bridge BOOTPROTO=none ONBOOT=yes DELAY=0 STP=on
Example vlan interface on a bridge (you can do this with physical interfaces, as well):
/etc/sysconfig/network-scripts/ifcfg-bond0.10: DEVICE=bond0.10 BOOTPROTO=none ONBOOT=yes USERCTL=no VLAN=yes BRIDGE=br10
Example bonded slave physical interface:
/etc/sysconfig/network-scripts/ifcfg-eth0: DEVICE=eth0 BOOTPROTO=none HWADDR=xx:xx:xx:xx:xx:xx ONBOOT=yes TYPE=Ethernet MASTER=bond0 SLAVE=yes USERCTL=no
Example master for bonding:
/etc/sysconfig/network-scripts/ifcfg-bond0: DEVICE=bond0 BOOTPROTO=none ONBOOT=yes USERCTL=no
The bonding parameters are set in /etc/modprobe.conf. e.g.:
alias bond0 bonding options bond0 mode=balance-rr miimon=100 updelay=1000