Hi!
I am building a KVM cluster that needs VM live migration.
My shared storage as well as the KVM hosts will be running CentOS.
Because 10 Gbps Ethernet switches are very expensive at the moment I will connect the KVM hosts to the storage by cross-over cables and create private networks for each connection (10.0.0.0/30 and 10.0.0.4/30).
The following diagram shows the topology
Management Management Management VLAN VLAN VLAN | | | +----+-----+ 10 Gbps +----+----+ 10 Gbps +----+-----+ | KVM Host |-----------| Storage |-----------| KVM Host | +----+-----+ +----+----+ +----+-----+ | | | Public Public Public VLAN VLAN VLAN
My question is: will live migration work in this configuration since the storage will have 2 different IP addresses (10.0.0.1 and 10.0.0.5) in 2 different networks even though it is the same storage?
Thanks!
A couple of comments.
Take a look at http://whiteboxswitch.com/ or do a general search for white box switches.
Migration will work so long as the storage is consistent between the two KVM hosts. If there is buffering or caching going on you could have problems. Something like GFS or NFS will work. I have used DRBD to setup a simple 2 node system and migration works quite nicely.
Take a look at ProxMox or some of the postings on alteeve.ca. A good place to start would be https://alteeve.ca/w/2-Node_Red_Hat_KVM_Cluster_Tutorial
On 07/06/2015 07:58 AM, Miguel Barbosa Gonçalves wrote:
Hi!
I am building a KVM cluster that needs VM live migration.
My shared storage as well as the KVM hosts will be running CentOS.
Because 10 Gbps Ethernet switches are very expensive at the moment I will connect the KVM hosts to the storage by cross-over cables and create private networks for each connection (10.0.0.0/30 and 10.0.0.4/30).
The following diagram shows the topology
Management Management Management VLAN VLAN VLAN | | | +----+-----+ 10 Gbps +----+----+ 10 Gbps +----+-----+ | KVM Host |-----------| Storage |-----------| KVM Host | +----+-----+ +----+----+ +----+-----+ | | | Public Public Public VLAN VLAN VLAN
My question is: will live migration work in this configuration since the storage will have 2 different IP addresses (10.0.0.1 and 10.0.0.5) in 2 different networks even though it is the same storage?
Thanks! _______________________________________________ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
On Mon, Jul 6, 2015 at 7:58 AM, Miguel Barbosa Gonçalves m@mbg.pt wrote:
Hi!
I am building a KVM cluster that needs VM live migration.
My shared storage as well as the KVM hosts will be running CentOS.
Because 10 Gbps Ethernet switches are very expensive at the moment I will connect the KVM hosts to the storage by cross-over cables and create private networks for each connection (10.0.0.0/30 and 10.0.0.4/30).
The following diagram shows the topology
Management Management Management VLAN VLAN VLAN | | | +----+-----+ 10 Gbps +----+----+ 10 Gbps +----+-----+ | KVM Host |-----------| Storage |-----------| KVM Host | +----+-----+ +----+----+ +----+-----+ | | | Public Public Public VLAN VLAN VLAN
My question is: will live migration work in this configuration since the storage will have 2 different IP addresses (10.0.0.1 and 10.0.0.5) in 2 different networks even though it is the same storage?
I don't know for sure if you'll run into problems having two different IP addresses, but I'd suspect you would. Some people (myself included) on this list use LVM backing and DRBD on the KVM hosts in which case the referenced storage layer is identically named.
Solution(?) for your scenario: Maybe create a bridge on your Storage node that includes both 10Gbit NICs going to your KVM hosts? That way you put a single IP address on the bridge and it is accessible (because it's bridged) to both KVM hosts. And less need for a 10Gbit switch (just yet).
-
Alvin Starr -
Miguel Barbosa Gonçalves -
Mike - st257