I'm unable to start a virtual machine with KVM.
I'm using Centos 5.4
I have installed all necessary rpms (to my knowledge), but as you can see from the output (below), the system does not boot the CD-ROM. It just sits there doing nothing:
# virt-install --prompt Would you like to use KVM acceleration? (yes or no) yes What is the name of your virtual machine? test
How much RAM should be allocated (in megabytes)? 1024 What would you like to use as the disk (file path)? /var/lib/libvirt/images/test.img How large would you like the disk (/var/lib/libvirt/images/test.img) to be (in gigabytes)? 20
What is the install CD-ROM/ISO or URL? /root/CentOS-5.4-i386-bin-1of6.iso
Starting install... Creating storage file... | 20 GB 00:00 Creating domain... | 0 B 00:00
Connected to domain test Escape character is ^] ÿ
the 'ÿ' character appears after a few seconds, then nothing...
Any help is appreciated!
Just curious as to what hardware you're running it on. And when you say you've installed the necessary rpms, does this mean you installed KVM by hand after the install, or through the installer when you first installed it?
From: centos-virt-bounces@centos.org [mailto:centos-virt-bounces@centos.org] On Behalf Of gibbe gabba Sent: Monday, April 26, 2010 7:02 AM To: centos-virt@centos.org Subject: [CentOS-virt] KVM: 'ÿ' character after starting a VM via virt-install
I'm unable to start a virtual machine with KVM.
I'm using Centos 5.4
I have installed all necessary rpms (to my knowledge), but as you can see from the output (below), the system does not boot the CD-ROM. It just sits there doing nothing: # virt-install --prompt
Would you like to use KVM acceleration? (yes or no) yes
What is the name of your virtual machine? test
How much RAM should be allocated (in megabytes)? 1024
What would you like to use as the disk (file path)? /var/lib/libvirt/images/test.img
How large would you like the disk (/var/lib/libvirt/images/test.img) to be (in gigabytes)? 20
What is the install CD-ROM/ISO or URL? /root/CentOS-5.4-i386-bin-1of6.iso
Starting install...
Creating storage file... | 20 GB 00:00
Creating domain... | 0 B 00:00
Connected to domain test
Escape character is ^]
ÿ
the 'ÿ' character appears after a few seconds, then nothing... https://www.centos.org/uploads/smil3dbd4d75edb5e.gif
Any help is appreciated!
The hardware is DELL PowerEdge R210 Quad Intel(R) Xeon(R) CPU X3430 @ 2.40GHz (/proc/cpuinfo).
I installed KVM with .RPMs after installing the system with a base Centos 5.4 installation (server). yum install kvm yum install virt-install
the kvm and kvm_intel modules are loaded. Also HyperThreading is available (enabled in BIOS), so KVM isn't complaining about that.
I've tried following Linux distros:
- Centos 5.4 - Fedora 12 - Ubuntu 10 - Sipcat 1.3
All of them have the same problem. I tried both installing from a CD ISO and from http repositories.
On Mon, Apr 26, 2010 at 4:53 PM, compdoc compdoc@hotrodpc.com wrote:
Just curious as to what hardware you're running it on. And when you say you've installed the necessary rpms, does this mean you installed KVM by hand after the install, or through the installer when you first installed it?
*From:* centos-virt-bounces@centos.org [mailto: centos-virt-bounces@centos.org] *On Behalf Of *gibbe gabba *Sent:* Monday, April 26, 2010 7:02 AM *To:* centos-virt@centos.org *Subject:* [CentOS-virt] KVM: 'ÿ' character after starting a VM via virt-install
I'm unable to start a virtual machine with KVM.
I'm using Centos 5.4
I have installed all necessary rpms (to my knowledge), but as you can see from the output (below), the system does not boot the CD-ROM. It just sits there doing nothing:
# virt-install --prompt
Would you like to use KVM acceleration? (yes or no) yes What is the name of your virtual machine? test
How much RAM should be allocated (in megabytes)? 1024
What would you like to use as the disk (file path)? /var/lib/libvirt/images/test.img How large would you like the disk (/var/lib/libvirt/images/test.img) to be (in gigabytes)? 20
What is the install CD-ROM/ISO or URL? /root/CentOS-5.4-i386-bin-1of6.iso
Starting install...
Creating storage file... | 20 GB 00:00
Creating domain... | 0 B 00:00
Connected to domain test
Escape character is ^]
ÿ
the 'ÿ' character appears after a few seconds, then nothing...
Any help is appreciated!
CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
Im guessing the hardware has virtual abilities enabled in the bios
This problem you have once happened to me, and from what I can remember it had something to do with storage. These days I use block devices, which is faster. If youre using file-based, I guess you might want to check permissions for the directory youre putting them in, as well as permissions for the .iso file youre installing from.
Also, make sure you are not running the zen kernel KVM requires the normal x86_64 kernel. Using the package manager to list my kvm components:
etherboot-zroms-kvm.x86_64 5.4.4-10.el5.centos installed
kmod-kvm.x86_64 83-105.el5_4.28 installed
kvm.x86_64 83-105.el5_4.28 installed
kvm-qemu-img.x86_64 83-105.el5_4.28 installed
uname -a: Linux centos.domain.com 2.6.18-164.15.1.el5 #1 SMP Wed Mar 17 11:30:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
From: centos-virt-bounces@centos.org [mailto:centos-virt-bounces@centos.org] On Behalf Of gibbe gabba Sent: Wednesday, April 28, 2010 1:06 AM To: Discussion about the virtualization on CentOS Subject: Re: [CentOS-virt] KVM: 'ÿ' character after starting a VM via virt-install
The hardware is DELL PowerEdge R210 Quad Intel(R) Xeon(R) CPU X3430 @ 2.40GHz (/proc/cpuinfo).
I installed KVM with .RPMs after installing the system with a base Centos 5.4 installation (server). yum install kvm yum install virt-install
the kvm and kvm_intel modules are loaded. Also HyperThreading is available (enabled in BIOS), so KVM isn't complaining about that.
I've tried following Linux distros:
- Centos 5.4 - Fedora 12 - Ubuntu 10 - Sipcat 1.3
All of them have the same problem. I tried both installing from a CD ISO and from http repositories.
On Mon, Apr 26, 2010 at 4:53 PM, compdoc compdoc@hotrodpc.com wrote:
Just curious as to what hardware you're running it on. And when you say you've installed the necessary rpms, does this mean you installed KVM by hand after the install, or through the installer when you first installed it?
From: centos-virt-bounces@centos.org [mailto:centos-virt-bounces@centos.org] On Behalf Of gibbe gabba Sent: Monday, April 26, 2010 7:02 AM To: centos-virt@centos.org Subject: [CentOS-virt] KVM: 'ÿ' character after starting a VM via virt-install
I'm unable to start a virtual machine with KVM.
I'm using Centos 5.4
I have installed all necessary rpms (to my knowledge), but as you can see from the output (below), the system does not boot the CD-ROM. It just sits there doing nothing:
# virt-install --prompt
Would you like to use KVM acceleration? (yes or no) yes
What is the name of your virtual machine? test
How much RAM should be allocated (in megabytes)? 1024
What would you like to use as the disk (file path)? /var/lib/libvirt/images/test.img
How large would you like the disk (/var/lib/libvirt/images/test.img) to be (in gigabytes)? 20
What is the install CD-ROM/ISO or URL? /root/CentOS-5.4-i386-bin-1of6.iso
Starting install...
Creating storage file... | 20 GB 00:00
Creating domain... | 0 B 00:00
Connected to domain test
Escape character is ^]
ÿ
the 'ÿ' character appears after a few seconds, then nothing... Error! Filename not specified.
Any help is appreciated!
_______________________________________________ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
Yes, virtualization is enabled in the bios. (otherwise virt-install would exit with an error saying it's not enabled).
I switched from Centos 5.4 i386 version to the x86-64 version. but still the same problem exists. I have those 4 rpm's install you mentioned.
Can you tell me more about using block devices? I cannot see any options for that in virt-install.
Thanks.
On Wed, Apr 28, 2010 at 8:06 PM, compdoc compdoc@hotrodpc.com wrote:
I’m guessing the hardware has virtual abilities enabled in the bios…
This problem you have once happened to me, and from what I can remember it had something to do with storage. These days I use block devices, which is faster. If you’re using file-based, I guess you might want to check permissions for the directory you’re putting them in, as well as permissions for the .iso file you’re installing from.
Also, make sure you are not running the zen kernel – KVM requires the normal x86_64 kernel. Using the package manager to list my kvm components:
etherboot-zroms-kvm.x86_64 5.4.4-10.el5.centos installed
kmod-kvm.x86_64 83-105.el5_4.28 installed
kvm.x86_64 83-105.el5_4.28 installed
kvm-qemu-img.x86_64 83-105.el5_4.28 installed
uname -a: Linux centos.domain.com 2.6.18-164.15.1.el5 #1 SMP Wed Mar 17 11:30:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
*From:* centos-virt-bounces@centos.org [mailto: centos-virt-bounces@centos.org] *On Behalf Of *gibbe gabba *Sent:* Wednesday, April 28, 2010 1:06 AM *To:* Discussion about the virtualization on CentOS *Subject:* Re: [CentOS-virt] KVM: 'ÿ' character after starting a VM via virt-install
The hardware is DELL PowerEdge R210 Quad Intel(R) Xeon(R) CPU X3430 @ 2.40GHz (/proc/cpuinfo).
I installed KVM with .RPMs after installing the system with a base Centos 5.4 installation (server). yum install kvm yum install virt-install
the kvm and kvm_intel modules are loaded. Also HyperThreading is available (enabled in BIOS), so KVM isn't complaining about that.
I've tried following Linux distros:
- Centos 5.4
- Fedora 12
- Ubuntu 10
- Sipcat 1.3
All of them have the same problem. I tried both installing from a CD ISO and from http repositories.
On Mon, Apr 26, 2010 at 4:53 PM, compdoc compdoc@hotrodpc.com wrote:
Just curious as to what hardware you're running it on. And when you say you've installed the necessary rpms, does this mean you installed KVM by hand after the install, or through the installer when you first installed it?
*From:* centos-virt-bounces@centos.org [mailto: centos-virt-bounces@centos.org] *On Behalf Of *gibbe gabba *Sent:* Monday, April 26, 2010 7:02 AM *To:* centos-virt@centos.org *Subject:* [CentOS-virt] KVM: 'ÿ' character after starting a VM via virt-install
I'm unable to start a virtual machine with KVM.
I'm using Centos 5.4
I have installed all necessary rpms (to my knowledge), but as you can see from the output (below), the system does not boot the CD-ROM. It just sits there doing nothing:
# virt-install --prompt
Would you like to use KVM acceleration? (yes or no) yes
What is the name of your virtual machine? test
How much RAM should be allocated (in megabytes)? 1024
What would you like to use as the disk (file path)? /var/lib/libvirt/images/test.img
How large would you like the disk (/var/lib/libvirt/images/test.img) to be (in gigabytes)? 20
What is the install CD-ROM/ISO or URL? /root/CentOS-5.4-i386-bin-1of6.iso
Starting install...
Creating storage file... | 20 GB 00:00
Creating domain... | 0 B 00:00
Connected to domain test
Escape character is ^]
ÿ
the 'ÿ' character appears after a few seconds, then nothing... *Error! Filename not specified.*
Any help is appreciated!
CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
-
compdoc -
gibbe gabba