On 01/06/2015 08:38 AM, Philippe-A. Lemelin wrote:
On 15-01-06 09:21 AM, George Dunlap wrote:
On Tue, Jan 6, 2015 at 11:42 AM, Pasi Kärkkäinen pasik@iki.fi wrote:
Hello,
It seems currently when you "yum update" CentOS 6.6 Xen host you end up getting python-virtinst from c6 base repo: python-virtinst-0.600.0-24.el6.noarch
and not from Xen4CentOS repo, because the version there is "older": 0.600.0-19.
.. which means the centos/xen-specific patch in python-virtinst is "lost". (default to tap2 instead of tap1, to make blktap2 work out-of-the-box with virt-install and virt-manager when using file based images as disks for VMs).
So.. who can build a new version of python-virtinst, with the blktap2 patch applied?
Looks like Johnny's built an updated version and placed it here:
http://people.centos.org/hughesjr/xen4-test/
Maybe we can leave it there for a day or so for people to test it, and push it to the main xen4 repo at EOD tomorrow?
-George
I just successfully completed the installation of a CentOS guest with this version of python-virtinst.
Thank you,
Philippe-A. Lemelin
I am doing a newer:
1. kernel from kernel.org (3.10.63), also the e1000e kernel module for that.
2. libvirt rolling in the last patch in this tree: http://libvirt.org/git/?p=libvirt.git;a=shortlog;h=refs/heads/v0.10.2-maint
3. newer xen-4.2.5 with all released XSAs > 108 (including 116 .. but not 115 as it is not released)
and that python-virtinstall
I have already modified the the source code and I am building, I'll post when they are reading for testing.
Thanks, Johnny Hughes
On 01/06/2015 09:09 AM, Johnny Hughes wrote:
On 01/06/2015 08:38 AM, Philippe-A. Lemelin wrote:
On 15-01-06 09:21 AM, George Dunlap wrote:
On Tue, Jan 6, 2015 at 11:42 AM, Pasi Kärkkäinen pasik@iki.fi wrote:
Hello,
It seems currently when you "yum update" CentOS 6.6 Xen host you end up getting python-virtinst from c6 base repo: python-virtinst-0.600.0-24.el6.noarch
and not from Xen4CentOS repo, because the version there is "older": 0.600.0-19.
.. which means the centos/xen-specific patch in python-virtinst is "lost". (default to tap2 instead of tap1, to make blktap2 work out-of-the-box with virt-install and virt-manager when using file based images as disks for VMs).
So.. who can build a new version of python-virtinst, with the blktap2 patch applied?
Looks like Johnny's built an updated version and placed it here:
http://people.centos.org/hughesjr/xen4-test/
Maybe we can leave it there for a day or so for people to test it, and push it to the main xen4 repo at EOD tomorrow?
-George
I just successfully completed the installation of a CentOS guest with this version of python-virtinst.
Thank you,
Philippe-A. Lemelin
I am doing a newer:
kernel from kernel.org (3.10.63), also the e1000e kernel module for that.
libvirt rolling in the last patch in this tree:
http://libvirt.org/git/?p=libvirt.git;a=shortlog;h=refs/heads/v0.10.2-maint
- newer xen-4.2.5 with all released XSAs > 108 (including 116 .. but
not 115 as it is not released)
and that python-virtinstall
I have already modified the the source code and I am building, I'll post when they are reading for testing.
OK, the RPMS I am going to release are now in:
http://people.centos.org/hughesjr/xen4-test/
I am going to roll those into the main xen4 repo after some testing .. provide any feedback to this thread.
With no negative feedback, this will likely go live tomorrow or Thursday if it works for the people who test it.
On Tue, Jan 06, 2015 at 12:23:28PM -0600, Johnny Hughes wrote:
I am doing a newer:
kernel from kernel.org (3.10.63), also the e1000e kernel module for that.
libvirt rolling in the last patch in this tree:
http://libvirt.org/git/?p=libvirt.git;a=shortlog;h=refs/heads/v0.10.2-maint
- newer xen-4.2.5 with all released XSAs > 108 (including 116 .. but
not 115 as it is not released)
and that python-virtinstall
I have already modified the the source code and I am building, I'll post when they are reading for testing.
OK, the RPMS I am going to release are now in:
http://people.centos.org/hughesjr/xen4-test/
I am going to roll those into the main xen4 repo after some testing .. provide any feedback to this thread.
With no negative feedback, this will likely go live tomorrow or Thursday if it works for the people who test it.
Johnny: I tested the following:
from http://people.centos.org/hughesjr/xen4-test/ - kernel-3.10.63-11.el6.centos.alt.x86_64.rpm - python-virtinst-0.600.0-25.el6.centos.alt.noarch.rpm
And they worked OK, no problems found!
I'll try to get the latest Xen 4.2.5-38 and libvirt 0.10.2.8-9 rpms tested soon aswell.
-- Pasi
On 01/06/2015 12:47 PM, Pasi Kärkkäinen wrote:
On Tue, Jan 06, 2015 at 12:23:28PM -0600, Johnny Hughes wrote:
I am doing a newer:
kernel from kernel.org (3.10.63), also the e1000e kernel module for that.
libvirt rolling in the last patch in this tree:
http://libvirt.org/git/?p=libvirt.git;a=shortlog;h=refs/heads/v0.10.2-maint
- newer xen-4.2.5 with all released XSAs > 108 (including 116 .. but
not 115 as it is not released)
and that python-virtinstall
I have already modified the the source code and I am building, I'll post when they are reading for testing.
OK, the RPMS I am going to release are now in:
http://people.centos.org/hughesjr/xen4-test/
I am going to roll those into the main xen4 repo after some testing .. provide any feedback to this thread.
With no negative feedback, this will likely go live tomorrow or Thursday if it works for the people who test it.
Johnny: I tested the following:
from http://people.centos.org/hughesjr/xen4-test/
- kernel-3.10.63-11.el6.centos.alt.x86_64.rpm
- python-virtinst-0.600.0-25.el6.centos.alt.noarch.rpm
And they worked OK, no problems found!
I'll try to get the latest Xen 4.2.5-38 and libvirt 0.10.2.8-9 rpms tested soon aswell.
-- Pasi
I upgraded my current xen4centos test box with all the applicable packages in the link above and all my Xen VMs still start and run correctly.
On Tue, Jan 06, 2015 at 01:44:13PM -0600, Johnny Hughes wrote:
On 01/06/2015 12:47 PM, Pasi Kärkkäinen wrote:
On Tue, Jan 06, 2015 at 12:23:28PM -0600, Johnny Hughes wrote:
I am doing a newer:
kernel from kernel.org (3.10.63), also the e1000e kernel module for that.
libvirt rolling in the last patch in this tree:
http://libvirt.org/git/?p=libvirt.git;a=shortlog;h=refs/heads/v0.10.2-maint
- newer xen-4.2.5 with all released XSAs > 108 (including 116 .. but
not 115 as it is not released)
and that python-virtinstall
I have already modified the the source code and I am building, I'll post when they are reading for testing.
OK, the RPMS I am going to release are now in:
http://people.centos.org/hughesjr/xen4-test/
I am going to roll those into the main xen4 repo after some testing .. provide any feedback to this thread.
With no negative feedback, this will likely go live tomorrow or Thursday if it works for the people who test it.
Johnny: I tested the following:
from http://people.centos.org/hughesjr/xen4-test/
- kernel-3.10.63-11.el6.centos.alt.x86_64.rpm
- python-virtinst-0.600.0-25.el6.centos.alt.noarch.rpm
And they worked OK, no problems found!
I'll try to get the latest Xen 4.2.5-38 and libvirt 0.10.2.8-9 rpms tested soon aswell.
-- Pasi
I upgraded my current xen4centos test box with all the applicable packages in the link above and all my Xen VMs still start and run correctly.
Good to hear!
-- Pasi
On Tue, Jan 06, 2015 at 08:47:14PM +0200, Pasi Kärkkäinen wrote:
On Tue, Jan 06, 2015 at 12:23:28PM -0600, Johnny Hughes wrote:
I am doing a newer:
kernel from kernel.org (3.10.63), also the e1000e kernel module for that.
libvirt rolling in the last patch in this tree:
http://libvirt.org/git/?p=libvirt.git;a=shortlog;h=refs/heads/v0.10.2-maint
- newer xen-4.2.5 with all released XSAs > 108 (including 116 .. but
not 115 as it is not released)
and that python-virtinstall
I have already modified the the source code and I am building, I'll post when they are reading for testing.
OK, the RPMS I am going to release are now in:
http://people.centos.org/hughesjr/xen4-test/
I am going to roll those into the main xen4 repo after some testing .. provide any feedback to this thread.
With no negative feedback, this will likely go live tomorrow or Thursday if it works for the people who test it.
Johnny: I tested the following:
from http://people.centos.org/hughesjr/xen4-test/
- kernel-3.10.63-11.el6.centos.alt.x86_64.rpm
- python-virtinst-0.600.0-25.el6.centos.alt.noarch.rpm
And they worked OK, no problems found!
I'll try to get the latest Xen 4.2.5-38 and libvirt 0.10.2.8-9 rpms tested soon aswell.
Also Xen 4.2.5-38 rpms and libvirt 0.10.2.8-9 rpms worked OK for me!
No problems found.
Thanks,
-- Pasi
On 01/07/2015 09:35 AM, Pasi Kärkkäinen wrote:
On Tue, Jan 06, 2015 at 08:47:14PM +0200, Pasi Kärkkäinen wrote:
On Tue, Jan 06, 2015 at 12:23:28PM -0600, Johnny Hughes wrote:
I am doing a newer:
kernel from kernel.org (3.10.63), also the e1000e kernel module for that.
libvirt rolling in the last patch in this tree:
http://libvirt.org/git/?p=libvirt.git;a=shortlog;h=refs/heads/v0.10.2-maint
- newer xen-4.2.5 with all released XSAs > 108 (including 116 .. but
not 115 as it is not released)
and that python-virtinstall
I have already modified the the source code and I am building, I'll post when they are reading for testing.
OK, the RPMS I am going to release are now in:
http://people.centos.org/hughesjr/xen4-test/
I am going to roll those into the main xen4 repo after some testing .. provide any feedback to this thread.
With no negative feedback, this will likely go live tomorrow or Thursday if it works for the people who test it.
Johnny: I tested the following:
from http://people.centos.org/hughesjr/xen4-test/
- kernel-3.10.63-11.el6.centos.alt.x86_64.rpm
- python-virtinst-0.600.0-25.el6.centos.alt.noarch.rpm
And they worked OK, no problems found!
I'll try to get the latest Xen 4.2.5-38 and libvirt 0.10.2.8-9 rpms tested soon aswell.
Also Xen 4.2.5-38 rpms and libvirt 0.10.2.8-9 rpms worked OK for me!
No problems found.
OK, these RPMS are now pushed to the master mirror server and should be distributed to all of mirror.centos.org in 30 minutes.
Thanks for testing.
-
Johnny Hughes -
Pasi Kärkkäinen