Hello,
I would really appreciate some help/guidance with this problem. First of all sorry for the long message. I would file a bug, but do not know if it is my fault, dm-cache, qemu or (probably) a combination of both. And i can imagine some of you have this setup up and running without problems (or maybe you think it works, just like i did, but it does not):
PROBLEM LVM cache writeback stops working as expected after a while with a qemu-kvm VM. A 100% working setup would be the holy grail in my opinion... and the performance of KVM/qemu is great i must say in the beginning.
DESCRIPTION
When using software RAID 1 (2x HDD) + software RAID 1 (2xSSD) and create a cached LV out of them, the VM performs initially great (at least 40.000 IOPS on 4k rand read/write)! But then after a while (and a lot of random IO, ca 10 - 20 G) it effectively turns in to a writethrough cache although there's much space left on the cachedlv.
When working as expected on KVM host all writes go to SSDs
iostat -x -m 2
Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sda 0.00 324.50 0.00 22.00 0.00 14.94 1390.57 1.90 86.39 0.00 86.39 5.32 11.70 sdb 0.00 324.50 0.00 22.00 0.00 14.94 1390.57 2.03 92.45 0.00 92.45 5.48 12.05 sdc 0.00 3932.00 0.00 *2191.50* 0.00 *270.07* 252.39 37.83 17.55 0.00 17.55 0.36 *78.05* sdd 0.00 3932.00 0.00 *2197.50 * 0.00 *271.01 * 252.57 38.96 18.14 0.00 18.14 0.36 *78.95*
When not working as expected on KVM host all writes go through the SSD on to the HDDs (effectively disabling writeback so it becomes a writethrough)
Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sda 0.00 7.00 234.50 *173.50 * 0.92 *1.95* 14.38 29.27 71.27 111.89 16.37 2.45 *100.00* sdb 0.00 3.50 212.00 *177.50 * 0.83 *1.95* 14.60 35.58 91.24 143.00 29.42 2.57*100.10* sdc 2.50 0.00 566.00 *199.00 * 2.69 0.78 9.28 0.08 0.11 0.13 0.04 0.10 *7.70* sdd 1.50 0.00 76.00 *199.00* 0.65 0.78 10.66 0.02 0.07 0.16 0.04 0.07 *1.85*
Stuff i've checked/tried:
- The data in the cached LV has then not exceeded even half of the space, so this should not happen. It even happens when only 20% of cachedata is used. - It seems to be triggerd most of the time when %cpy/sync column of `lvs -a` is about 30%. But this is not always the case! - changing the cachepolicy from cleaner to smq, wait (check flush ready with lvs -a) and then back to smq seems to help /sometimes/! But not always...
lvchange --cachepolicy cleaner /dev/mapper/XXX-cachedlv
lvs -a
lvchange --cachepolicy smq /dev/mapper/XXX-cachedlv
- *when mounting the LV inside the host this does not seem to happen!!* So it looks like a qemu-kvm / dm-cache combination issue. Only difference is that inside host i do mkfs in stead of LVM inside VM (so could be LVM inside VM on top of LVM on KVM host problem too? small chance probably because the first 10 - 20GB it works great!)
- tried disabling Selinux, upgrading to newest kernels (elrepo ml and lt), played around with dirty_cache thingeys like proc/sys/vm/dirty_writeback_centisecs /proc/sys/vm/dirty_expire_centisecs cat /proc/sys/vm/dirty_ratio , and migration threashold of dmsetup, and other probably non important stuff like vm.dirty_bytes
- when in "slow state" the systems kworkers are exessively using IO (10 - 20 MB per kworker process). This seems to be the writeback process (CPY%Sync) because the cache wants to flush to HDD. But the strange thing is that after a good sync (0% left), the disk may become slow again after a few MBs of data. A reboot sometimes helps.
- have tried iothreads, virtio-scsi, vcpu driver setting on virtio-scsi controller, cachesettings, disk shedulers etc. Nothing helped.
- the new samsung 950 PRO SSDs have HPA enabled (30%!!), i have AMD FX(tm)-8350, 16G RAM
It feels like the lvm cache has a threshold (about 20G of data that is dirty) and that is stops allowing the qemu-kvm process to use writeback caching (the root uses inside the host seems to not have this limitation). It starts flushing, but only to a certain point. After a few MBs of data it is right back in the slow spot again. Only solution is waiting for a long time (independant of CPY%SYNC) or sometimes change cachepolicy and force flush. This prevents for me the production use of this system. But it's so promising, so I hope somebody can help.
desired state: Doing the FIO test (described in section reproduce) repeatedly should keep being fast till cachedlv is more or less full. If resyncing back to disc causes this degradation, it should actually flush it fully within a reasonable time and give opportunity to write fast again up to a given threshold. It now seems like a one time use cache that only uses a fraction of the SSD and is useless/very unstable afterwards.
REPRODUCE 1. Install newest CentOS 7 on software RAID 1 HDDs with LVM. Keep a lot of space for the LVM cache (no /home)! So make the VG as large as possible during anaconda partitioning.
2. once installed and booted in to the system, install qemu-kvm
yum install -y centos-release-qemu-ev yum install -y qemu-kvm-ev libvirt bridge-utils net-tools # disbale ksm (probably not important / needed) systemctl disable ksm systemctl disable ksmtuned
3. create LVM cache
#set some variables and create a raid1 array with the two SSDs
VGBASE= && ssddevice1=/dev/sdX1 && ssddevice2=/dev/sdX1 && hddraiddevice=/dev/mdXXX && ssdraiddevice=/dev/mdXXX && mdadm --create --verbose ${ssdraiddevice} --level=mirror --bitmap=none --raid-devices=2 ${ssddevice1} ${ssddevice2}
# create PV and extend VG
pvcreate ${ssdraiddevice} && vgextend ${VGBASE} ${ssdraiddevice}
# create slow LV on HDDs (use max space left if you want)
pvdisplay ${hddraiddevice} lvcreate -lXXXX -n cachedlv ${VGBASE} ${hddraiddevice}
# create the meta and data: for testing purposes I keep about 20G of the SSD for a uncached lv. To rule out it is not the SSD.
lvcreate -l XX -n testssd ${VGBASE} ${ssdraiddevice}
#The rest can be used as cachedata/metadata.
pvdisplay ${ssdraiddevice} # about 1/1000 of the space you have left on the SSD for the meta (minimum of 4) lvcreate -l X -n cachemeta ${VGBASE} ${ssdraiddevice} # the rest can be used as cachedata lvcreate -l XXX -n cachedata ${VGBASE} ${ssdraiddevice}
# convert/combine pools so cachedlv is actually cached
lvconvert --type cache-pool --cachemode writeback --poolmetadata ${VGBASE}/cachemeta ${VGBASE}/cachedata
lvconvert --type cache --cachepool ${VGBASE}/cachedata ${VGBASE}/cachedlv
# my system now looks like (VG is called cl, default of installer) [root@localhost ~]# lvs -a LV VG Attr LSize Pool Origin [cachedata] cl Cwi---C--- 97.66g * [cachedata_cdata] cl Cwi-ao---- 97.66g ** ** [cachedata_cmeta] cl ewi-ao---- 100.00m * * cachedlv cl Cwi-aoC--- 1.75t [cachedata] [cachedlv_corig] * [cachedlv_corig] cl owi-aoC--- 1.75t [lvol0_pmspare] cl ewi------- 100.00m root cl -wi-ao---- 46.56g swap cl -wi-ao---- 14.96g * testssd cl -wi-a----- 45.47g
*[root@localhost ~]#lsblk* * NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdd 8:48 0 163G 0 disk └─sdd1 8:49 0 163G 0 part └─md128 9:128 0 162.9G 0 raid1 ├─cl-cachedata_cmeta 253:4 0 100M 0 lvm │ └─cl-cachedlv 253:6 0 1.8T 0 lvm ├─cl-testssd 253:2 0 45.5G 0 lvm └─cl-cachedata_cdata 253:3 0 97.7G 0 lvm └─cl-cachedlv 253:6 0 1.8T 0 lvm sdb 8:16 0 1.8T 0 disk ├─sdb2 8:18 0 1.8T 0 part │ └─md127 9:127 0 1.8T 0 raid1 │ ├─cl-swap 253:1 0 15G 0 lvm [SWAP] │ ├─cl-root 253:0 0 46.6G 0 lvm / │ └─cl-cachedlv_corig 253:5 0 1.8T 0 lvm │ └─cl-cachedlv 253:6 0 1.8T 0 lvm └─sdb1 8:17 0 954M 0 part └─md126 9:126 0 954M 0 raid1 /boot sdc 8:32 0 163G 0 disk └─sdc1 8:33 0 163G 0 part └─md128 9:128 0 162.9G 0 raid1 ├─cl-cachedata_cmeta 253:4 0 100M 0 lvm │ └─cl-cachedlv 253:6 0 1.8T 0 lvm ├─cl-testssd 253:2 0 45.5G 0 lvm └─cl-cachedata_cdata 253:3 0 97.7G 0 lvm └─cl-cachedlv 253:6 0 1.8T 0 lvm sda 8:0 0 1.8T 0 disk ├─sda2 8:2 0 1.8T 0 part │ └─md127 9:127 0 1.8T 0 raid1 │ ├─cl-swap 253:1 0 15G 0 lvm [SWAP] │ ├─cl-root 253:0 0 46.6G 0 lvm / │ └─cl-cachedlv_corig 253:5 0 1.8T 0 lvm │ └─cl-cachedlv 253:6 0 1.8T 0 lvm └─sda1 8:1 0 954M 0 part └─md126 9:126 0 954M 0 raid1 /boot
# now create vm wget http://ftp.tudelft.nl/centos.org/6/isos/x86_64/CentOS-6.9-x86_64-minimal.iso -P /home/ DISK=/dev/mapper/XXXX-cachedlv
# watch out, my netsetup uses a custom bridge/network in the following command. Please replace with what you normally use. virt-install -n CentOS1 -r 12000 --os-variant=centos6.7 --vcpus 7 --disk path=${DISK},cache=none,bus=virtio --network bridge=pubbr,model=virtio --cdrom /home/CentOS-6.9-x86_64-minimal.iso --graphics vnc,port=5998,listen=0.0.0.0 --cpu host
# now connect with client PC to qemu virt-viewer --connect=qemu+ssh://root@192.168.0.XXX/system --name CentOS1
And install everything on the single vda disc with LVM (i use defaults in anaconda, but remove the large /home to prevent SSD beeing over used).
After install and reboot log in to VM and
yum install epel-release -y && yum install screen fio htop -y
and then run disk test:
fio --randrepeat=1 --ioengine=libaio --direct=1 --gtod_reduce=1 --name=test *--filename=test* --bs=4k --iodepth=64 --size=4G --readwrite=randrw --rwmixread=75
then *keep repeating *but *change the filename* attribute so it does not use the same blocks over and over again.
In the beginning the performance is great!! Wow, very impressive 150MB/s 4k random r/w (close to bare metal, about 20% - 30% loss). But after a few (usually about 4 or 5) runs (always changing the filename, but not overfilling the FS, it drops to about 10 MBs/sec.
normal/in the beginning
read : io=3073.2MB, bw=183085KB/s, *iops=45771* , runt= 17188msec write: io=1022.1MB, bw=60940KB/s, *iops=15235* , runt= 17188msec
but then
read : io=3073.2MB, bw=183085KB/s, *iops=**2904* , runt= 17188msec write: io=1022.1MB, bw=60940KB/s, *iops=1751* , runt= 17188msec
or even worse up to the point that it is actually the HDD that is written to (about 500 iops).
P.S. when a test is/was slow, that means it is on the HDDs. So even when fixing the problem (sometimes just by waiting), that specific file will keep being slow when redoing the test till its promoted to the lvm cache (takes a lot of reads I think). And once on the SSD it sometimes keeps beeing fast, although a new testfile will be slow. So I really recommend changing the testfile all the time when trying to see if a change in speed has occurred.
Adding Paolo and Miroslav.
On Sat, Apr 8, 2017 at 4:49 PM, Richard Landsman - Rimote <richard@rimote.nl
wrote:
Hello,
I would really appreciate some help/guidance with this problem. First of all sorry for the long message. I would file a bug, but do not know if it is my fault, dm-cache, qemu or (probably) a combination of both. And i can imagine some of you have this setup up and running without problems (or maybe you think it works, just like i did, but it does not):
PROBLEM LVM cache writeback stops working as expected after a while with a qemu-kvm VM. A 100% working setup would be the holy grail in my opinion... and the performance of KVM/qemu is great i must say in the beginning.
DESCRIPTION
When using software RAID 1 (2x HDD) + software RAID 1 (2xSSD) and create a cached LV out of them, the VM performs initially great (at least 40.000 IOPS on 4k rand read/write)! But then after a while (and a lot of random IO, ca 10 - 20 G) it effectively turns in to a writethrough cache although there's much space left on the cachedlv.
When working as expected on KVM host all writes go to SSDs
iostat -x -m 2
Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sda 0.00 324.50 0.00 22.00 0.00 14.94 1390.57 1.90 86.39 0.00 86.39 5.32 11.70 sdb 0.00 324.50 0.00 22.00 0.00 14.94 1390.57 2.03 92.45 0.00 92.45 5.48 12.05 sdc 0.00 3932.00 0.00 *2191.50* 0.00 *270.07* 252.39 37.83 17.55 0.00 17.55 0.36 * 78.05* sdd 0.00 3932.00 0.00 *2197.50 * 0.00 *271.01 * 252.57 38.96 18.14 0.00 18.14 0.36 *78.95*
When not working as expected on KVM host all writes go through the SSD on to the HDDs (effectively disabling writeback so it becomes a writethrough)
Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sda 0.00 7.00 234.50 *173.50 * 0.92 * 1.95* 14.38 29.27 71.27 111.89 16.37 2.45 *100.00* sdb 0.00 3.50 212.00 *177.50 * 0.83 * 1.95* 14.60 35.58 91.24 143.00 29.42 2.57* 100.10* sdc 2.50 0.00 566.00 *199.00 * 2.69 0.78 9.28 0.08 0.11 0.13 0.04 0.10 *7.70* sdd 1.50 0.00 76.00 *199.00* 0.65 0.78 10.66 0.02 0.07 0.16 0.04 0.07 *1.85*
Stuff i've checked/tried:
- The data in the cached LV has then not exceeded even half of the space,
so this should not happen. It even happens when only 20% of cachedata is used.
- It seems to be triggerd most of the time when %cpy/sync column of `lvs
-a` is about 30%. But this is not always the case!
- changing the cachepolicy from cleaner to smq, wait (check flush ready
with lvs -a) and then back to smq seems to help *sometimes*! But not always...
lvchange --cachepolicy cleaner /dev/mapper/XXX-cachedlv
lvs -a
lvchange --cachepolicy smq /dev/mapper/XXX-cachedlv
- *when mounting the LV inside the host this does not seem to happen!!*
So it looks like a qemu-kvm / dm-cache combination issue. Only difference is that inside host i do mkfs in stead of LVM inside VM (so could be LVM inside VM on top of LVM on KVM host problem too? small chance probably because the first 10 - 20GB it works great!)
- tried disabling Selinux, upgrading to newest kernels (elrepo ml and lt),
played around with dirty_cache thingeys like proc/sys/vm/dirty_writeback_centisecs /proc/sys/vm/dirty_expire_centisecs cat /proc/sys/vm/dirty_ratio , and migration threashold of dmsetup, and other probably non important stuff like vm.dirty_bytes
- when in "slow state" the systems kworkers are exessively using IO (10 -
20 MB per kworker process). This seems to be the writeback process (CPY%Sync) because the cache wants to flush to HDD. But the strange thing is that after a good sync (0% left), the disk may become slow again after a few MBs of data. A reboot sometimes helps.
- have tried iothreads, virtio-scsi, vcpu driver setting on virtio-scsi
controller, cachesettings, disk shedulers etc. Nothing helped.
- the new samsung 950 PRO SSDs have HPA enabled (30%!!), i have AMD
FX(tm)-8350, 16G RAM
It feels like the lvm cache has a threshold (about 20G of data that is dirty) and that is stops allowing the qemu-kvm process to use writeback caching (the root uses inside the host seems to not have this limitation). It starts flushing, but only to a certain point. After a few MBs of data it is right back in the slow spot again. Only solution is waiting for a long time (independant of CPY%SYNC) or sometimes change cachepolicy and force flush. This prevents for me the production use of this system. But it's so promising, so I hope somebody can help.
desired state: Doing the FIO test (described in section reproduce) repeatedly should keep being fast till cachedlv is more or less full. If resyncing back to disc causes this degradation, it should actually flush it fully within a reasonable time and give opportunity to write fast again up to a given threshold. It now seems like a one time use cache that only uses a fraction of the SSD and is useless/very unstable afterwards.
REPRODUCE
- Install newest CentOS 7 on software RAID 1 HDDs with LVM. Keep a lot of
space for the LVM cache (no /home)! So make the VG as large as possible during anaconda partitioning.
- once installed and booted in to the system, install qemu-kvm
yum install -y centos-release-qemu-ev yum install -y qemu-kvm-ev libvirt bridge-utils net-tools # disbale ksm (probably not important / needed) systemctl disable ksm systemctl disable ksmtuned
- create LVM cache
#set some variables and create a raid1 array with the two SSDs
VGBASE= && ssddevice1=/dev/sdX1 && ssddevice2=/dev/sdX1 && hddraiddevice=/dev/mdXXX && ssdraiddevice=/dev/mdXXX && mdadm --create --verbose ${ssdraiddevice} --level=mirror --bitmap=none --raid-devices=2 ${ssddevice1} ${ssddevice2}
# create PV and extend VG
pvcreate ${ssdraiddevice} && vgextend ${VGBASE} ${ssdraiddevice}
# create slow LV on HDDs (use max space left if you want)
pvdisplay ${hddraiddevice} lvcreate -lXXXX -n cachedlv ${VGBASE} ${hddraiddevice}
# create the meta and data: for testing purposes I keep about 20G of the SSD for a uncached lv. To rule out it is not the SSD.
lvcreate -l XX -n testssd ${VGBASE} ${ssdraiddevice}
#The rest can be used as cachedata/metadata.
pvdisplay ${ssdraiddevice} # about 1/1000 of the space you have left on the SSD for the meta (minimum of 4) lvcreate -l X -n cachemeta ${VGBASE} ${ssdraiddevice} # the rest can be used as cachedata lvcreate -l XXX -n cachedata ${VGBASE} ${ssdraiddevice}
# convert/combine pools so cachedlv is actually cached
lvconvert --type cache-pool --cachemode writeback --poolmetadata ${VGBASE}/cachemeta ${VGBASE}/cachedata
lvconvert --type cache --cachepool ${VGBASE}/cachedata ${VGBASE}/cachedlv
# my system now looks like (VG is called cl, default of installer) [root@localhost ~]# lvs -a LV VG Attr LSize Pool Origin [cachedata] cl Cwi---C--- 97.66g
- [cachedata_cdata] cl Cwi-ao----
97.66g *
[cachedata_cmeta] cl ewi-ao---- 100.00m *
cachedlv cl Cwi-aoC--- 1.75t [cachedata]
[cachedlv_corig] * [cachedlv_corig] cl owi-aoC--- 1.75t
[lvol0_pmspare] cl ewi------- 100.00m
root cl -wi-ao---- 46.56g
swap cl -wi-ao---- 14.96g
- testssd cl -wi-a----- 45.47g *[root@localhost ~]#lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdd 8:48 0 163G 0 disk └─sdd1 8:49 0 163G 0 part └─md128 9:128 0 162.9G 0 raid1 ├─cl-cachedata_cmeta 253:4 0 100M 0 lvm │ └─cl-cachedlv 253:6 0 1.8T 0 lvm ├─cl-testssd 253:2 0 45.5G 0 lvm └─cl-cachedata_cdata 253:3 0 97.7G 0 lvm └─cl-cachedlv 253:6 0 1.8T 0 lvm sdb 8:16 0 1.8T 0 disk ├─sdb2 8:18 0 1.8T 0 part │ └─md127 9:127 0 1.8T 0 raid1 │ ├─cl-swap 253:1 0 15G 0 lvm [SWAP] │ ├─cl-root 253:0 0 46.6G 0 lvm / │ └─cl-cachedlv_corig 253:5 0 1.8T 0 lvm │ └─cl-cachedlv 253:6 0 1.8T 0 lvm └─sdb1 8:17 0 954M 0 part └─md126 9:126 0 954M 0 raid1 /boot sdc 8:32 0 163G 0 disk └─sdc1 8:33 0 163G 0 part └─md128 9:128 0 162.9G 0 raid1 ├─cl-cachedata_cmeta 253:4 0 100M 0 lvm │ └─cl-cachedlv 253:6 0 1.8T 0 lvm ├─cl-testssd 253:2 0 45.5G 0 lvm └─cl-cachedata_cdata 253:3 0 97.7G 0 lvm └─cl-cachedlv 253:6 0 1.8T 0 lvm sda 8:0 0 1.8T 0 disk ├─sda2 8:2 0 1.8T 0 part │ └─md127 9:127 0 1.8T 0 raid1 │ ├─cl-swap 253:1 0 15G 0 lvm [SWAP] │ ├─cl-root 253:0 0 46.6G 0 lvm / │ └─cl-cachedlv_corig 253:5 0 1.8T 0 lvm │ └─cl-cachedlv 253:6 0 1.8T 0 lvm └─sda1 8:1 0 954M 0 part └─md126 9:126 0 954M 0 raid1 /boot
# now create vm wget http://ftp.tudelft.nl/centos.org/6/isos/x86_64/CentOS-6.9- x86_64-minimal.iso -P /home/ DISK=/dev/mapper/XXXX-cachedlv
# watch out, my netsetup uses a custom bridge/network in the following command. Please replace with what you normally use. virt-install -n CentOS1 -r 12000 --os-variant=centos6.7 --vcpus 7 --disk path=${DISK},cache=none,bus=virtio --network bridge=pubbr,model=virtio --cdrom /home/CentOS-6.9-x86_64-minimal.iso --graphics vnc,port=5998,listen=0.0.0.0 --cpu host
# now connect with client PC to qemu virt-viewer --connect=qemu+ssh://root@192.168.0.XXX/system --name CentOS1
And install everything on the single vda disc with LVM (i use defaults in anaconda, but remove the large /home to prevent SSD beeing over used).
After install and reboot log in to VM and
yum install epel-release -y && yum install screen fio htop -y
and then run disk test:
fio --randrepeat=1 --ioengine=libaio --direct=1 --gtod_reduce=1 --name=test *--filename=test* --bs=4k --iodepth=64 --size=4G --readwrite=randrw --rwmixread=75
then *keep repeating *but *change the filename* attribute so it does not use the same blocks over and over again.
In the beginning the performance is great!! Wow, very impressive 150MB/s 4k random r/w (close to bare metal, about 20% - 30% loss). But after a few (usually about 4 or 5) runs (always changing the filename, but not overfilling the FS, it drops to about 10 MBs/sec.
normal/in the beginning
read : io=3073.2MB, bw=183085KB/s, *iops=45771* , runt= 17188msec write: io=1022.1MB, bw=60940KB/s, *iops=15235* , runt= 17188msec
but then
read : io=3073.2MB, bw=183085KB/s, *iops=**2904* , runt= 17188msec write: io=1022.1MB, bw=60940KB/s, *iops=1751* , runt= 17188msec
or even worse up to the point that it is actually the HDD that is written to (about 500 iops).
P.S. when a test is/was slow, that means it is on the HDDs. So even when fixing the problem (sometimes just by waiting), that specific file will keep being slow when redoing the test till its promoted to the lvm cache (takes a lot of reads I think). And once on the SSD it sometimes keeps beeing fast, although a new testfile will be slow. So I really recommend changing the testfile all the time when trying to see if a change in speed has occurred.
-- Met vriendelijke groet,
Richard Landsmanhttp://rimote.nl
T: +31 (0)50 - 763 04 07 (ma-vr 9:00 tot 18:00)
24/7 bij storingen: +31 (0)6 - 4388 7949 @RimoteSaS (Twitter Serviceberichten/security updates)
CentOS-virt mailing list CentOS-virt@centos.org https://lists.centos.org/mailman/listinfo/centos-virt
Hello everyone,
Anybody had the chance to test out this setup and reproduce the problem? I assumed it would be something that's used often these days and a solution would benefit a lot of users. If can be of any assistance please contact me.
On Thu, Apr 20, 2017 at 12:32 PM, Richard Landsman - Rimote < richard@rimote.nl> wrote:
Hello everyone,
Anybody had the chance to test out this setup and reproduce the problem? I assumed it would be something that's used often these days and a solution would benefit a lot of users. If can be of any assistance please contact me.
I haven't seen any additional report of this happening, can you please try to reproduce with the new qemu-kvm-ev-2.6.0-28.el7_3.9.1 currently in testing?
-- Met vriendelijke groet,
Richard Landsmanhttp://rimote.nl
T: +31 (0)50 - 763 04 07 (ma-vr 9:00 tot 18:00)
24/7 bij storingen: +31 (0)6 - 4388 7949 @RimoteSaS (Twitter Serviceberichten/security updates)
Hello everyone,
I've tried just about everything the last weeks and my findings are:
- the problem with LVM cache seems NOT to be caused by KVM/qemu. But is /seems/ that it is noticeable more inside a KVM. So the slowdown of the cache also happens on HW-node, but you must give it a serious go before you notice.
- Not a single time I succeeded in creating a well working cache using LVM2 cache. In artificial / KVM setups and with *small* devices it works (dm-testsuite etc). But in real life scenario with *fully population all the PV's* on 2TB HDDs and 250G SSDs (both RAID 1) the cache stopped working after 20 - 50 GB of writes although the cache is 150+G large. Please use fio examples below and always use new filenames so not the same blocks are overwritten.
The poor performance stayed most of the time even when all blocks were flushed. Very unpredictable cache performance / behavior.
I finally decided to go for dm-writeboost in stead of lvm2 cache (dm-cache). This was the only way to create a well working cache that works till 95% filled. But of course would be nicer to have something that generally more stable like LVM2.
I guess in the sens of this mailing-list this issue is resolved because it does not seem to belong here.
-
Richard Landsman - Rimote -
Sandro Bonazzola