Discuss June 2010

discuss@lists.centos.org

249 participants
189 discussions

Monitor Network Traffic
by sadas sadas 11 Jun '10

11 Jun '10

What is the best way to monitor the total incoming / outcoming network traffic of CentOS server. I think that the solution is to monitor the network interfaces and to send SNMP packets to remote server. But is it possible? regards

6 8

Service monitoring/"Monit"?
by Toralf Lund 11 Jun '10

11 Jun '10

Has anybody here tried the "Monit" utility (http://mmonit.com/monit/)? I need to set up some kind of "watchdog" functionality for a custom service otherwise started via init (i.e. via a script in /etc/init.d + rc*.d links managed by chkconfig) and it seems like this system may give me nearly what I want. However, something that concerns me about it, is that it appears to take full ownership of the services it monitors, and pretty much bypass the init system, in that once I've told monit to watch a process, it makes not difference if the associated service is enabled or not (via "chkconfig") , and there is no good way to fully stop the service, besides removing the Monit config or disabling Monit itself. (Or maybe I can use special "monit" commands, too, but that means precisely that Monit "owns" the service, which I somehow don't quite like.) What I'd really like, is to have my process watched and restarted if it goes a way, but only if it had already been started via "init" or through the "service" command, or possibly direct execution of the "init.d" script. This also means it should be restarted if it crashes or if is stopped via a direct "kill", but not after "service <name> stop" or similar. Which might mean it all boils down to checking if, and only if, the pid file for the service already exists. (Does that make any sense?) So, does anyone know if there is a way to convince Monit to do this for me? Or alternatively, is there a different tool that might do the job? And yes, I know it shouldn't be that hard to design a program/script/cron job to do it all for me, but I still think not having to maintain another software component would be nice... - Toralf This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

4 11

DHCP/DNS server for LAN with mainly Windows clients : Outlook Express vs. Webmail problem
by Niki Kovacs 11 Jun '10

11 Jun '10

Hi, I recently setup a CentOS 5 file server for a small LAN consisting of 15 Windows XP clients. The LAN is eventually expected to migrate to Linux, at least some of the client machines. The previous setup made by a local Windows-only computer firm was an unhealthy mix of static and dynamic IP addresses with conflicting adresses, etc. First thing I undertook was clean up this mess by setting up a DHCP + local cache DNS server on the Linux machine. Now the curious problem I have: IP addresses are attributed correctly, people can surf on the internet all right. But the only thing they can't seem to do is send mail with Outlook or Outlook Express. I have to revert to the ISP's DNS, but so I lose the benefit of local DNS. And I don't have the slightest clue as to why that is so. Here's my setup, maybe one of the gurus on the list has an idea: 1) /etc/dhcpd.conf (the fixed addresses are attributed because the local printer has a page counting device that works with IP adresses): --8<--------------------------------------- ddns-update-style interim; authoritative; default-lease-time 86400; max-lease-time 86400; option broadcast-address 192.168.0.255; option subnet-mask 255.255.255.0; option routers 192.168.0.1; option domain-name-servers 192.168.0.2; option domain-name "regards.arles"; subnet 192.168.0.0 netmask 255.255.255.0 { range 192.168.0.100 192.168.0.150; } host poste1 { hardware ethernet 00:26:18:B7:D6:10; fixed-address 192.168.0.101; option host-name "poste1"; } host poste2 { hardware ethernet 00:24:81:69:A3:DE; fixed-address 192.168.0.102; option host-name "poste2"; } host poste3 { hardware ethernet 00:1B:FC:6F:66:2C; fixed-address 192.168.0.103; option host-name "poste3"; } ... --8<--------------------------------------- For setting up Bind, I used a "dummy" domain name, like I usually do in LAN's. For example, my home network is "presbytere.montpezat", the local town hall's network is "mairie.montpezat". The network here is "regards.arles". ("Regards" is the name of a local association, and "Arles" is the city in South France where it's located). 2) /etc/named.conf: --8<--------------------------------------- options { directory "/var/named"; listen-on { 127.0.0.1; 192.168.0.0/24; }; }; zone "." IN { type hint; file "named.root"; }; zone "localhost" IN { type master; file "zone.localhost"; allow-update { none; }; }; zone "0.0.127.in-addr.arpa" IN { type master; file "revp.127.0.0"; allow-update { none; }; }; zone "regards.arles" IN { type master; file "zone.arles.regards"; }; zone "0.168.192.in-addr.arpa" { type master; file "revp.192.168.0"; }; --8<--------------------------------------- 3) /var/named/named.root: --8<--------------------------------------- ; <<>> DiG 9.3.6-P1-RedHat-9.3.6-4.P1.el5 <<>> ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 42704 ;; flags: qr rd ra; QUERY: 1, ANSWER: 13, AUTHORITY: 0, ADDITIONAL: 14 ;; QUESTION SECTION: ;. IN NS ;; ANSWER SECTION: . 106187 IN NS h.root-servers.net. . 106187 IN NS i.root-servers.net. . 106187 IN NS j.root-servers.net. . 106187 IN NS k.root-servers.net. . 106187 IN NS l.root-servers.net. . 106187 IN NS m.root-servers.net. . 106187 IN NS a.root-servers.net. . 106187 IN NS b.root-servers.net. . 106187 IN NS c.root-servers.net. . 106187 IN NS d.root-servers.net. . 106187 IN NS e.root-servers.net. . 106187 IN NS f.root-servers.net. . 106187 IN NS g.root-servers.net. ;; ADDITIONAL SECTION: a.root-servers.net. 401883 IN A 198.41.0.4 a.root-servers.net. 401883 IN AAAA 2001:503:ba3e::2:30 b.root-servers.net. 401883 IN A 192.228.79.201 c.root-servers.net. 401883 IN A 192.33.4.12 d.root-servers.net. 401883 IN A 128.8.10.90 e.root-servers.net. 401883 IN A 192.203.230.10 f.root-servers.net. 401883 IN A 192.5.5.241 f.root-servers.net. 401883 IN AAAA 2001:500:2f::f g.root-servers.net. 401883 IN A 192.112.36.4 h.root-servers.net. 401883 IN A 128.63.2.53 h.root-servers.net. 401883 IN AAAA 2001:500:1::803f:235 i.root-servers.net. 401883 IN A 192.36.148.17 j.root-servers.net. 192587 IN A 192.58.128.30 j.root-servers.net. 192587 IN AAAA 2001:503:c27::2:30 ;; Query time: 6 msec ;; SERVER: 192.168.1.252#53(192.168.1.252) ;; WHEN: Wed May 26 18:47:37 2010 ;; MSG SIZE rcvd: 500 --8<--------------------------------------- 4) /var/named/zone.localhost: --8<--------------------------------------- $TTL 1D $ORIGIN localhost. @ IN SOA @ root ( 0000002 ; Serial 8H ; Refresh 15M ; Retry 1W ; Expire 1D) ; Minimum TTL IN NS @ IN A 127.0.0.1 --8<--------------------------------------- 5) /var/named/revp.127.0.0: --8<--------------------------------------- $TTL 1D $ORIGIN 0.0.127.in-addr.arpa. @ IN SOA localhost. root.localhost. ( 0000002 ; Serial 8H ; Refresh 15M ; Retry 1W ; Expire 1D ) ; Minimum TTL IN NS localhost. 1 IN PTR localhost. --8<--------------------------------------- 6) /var/named/zone.arles.regards: --8<--------------------------------------- $ORIGIN regards.arles. $TTL 1D @ IN SOA ibmx225 hostmaster ( 0000003 ; Serial 8H ; Refresh 4H ; Retry 4W ; Expire 1D ) ; Minimum NS ibmx225 localhost A 127.0.0.1 poste1 A 192.168.0.101 poste2 A 192.168.0.102 poste3 A 192.168.0.103 poste4 A 192.168.0.104 poste5 A 192.168.0.105 poste6 A 192.168.0.106 poste7 A 192.168.0.107 poste8 A 192.168.0.108 poste9 A 192.168.0.109 poste10 A 192.168.0.110 poste11 A 192.168.0.111 poste12 A 192.168.0.112 poste13 A 192.168.0.113 poste14 A 192.168.0.114 --8<--------------------------------------- 7) /var/named/revp.192.168.0: --8<--------------------------------------- $ORIGIN 0.168.192.in-addr.arpa. $TTL 1D @ IN SOA ibmx225.regards.arles. contact.kikinovak.net ( 0000003 ; Serial 28800 ; Refresh 14400 ; Retry 2419200 ; Expire 86400 ; Minimum ) NS ibmx225.regards.arles. 101 PTR poste1.regards.arles. 102 PTR poste2.regards.arles. 103 PTR poste3.regards.arles. 104 PTR poste4.regards.arles. 105 PTR poste5.regards.arles. 106 PTR poste6.regards.arles. 107 PTR poste7.regards.arles. 108 PTR poste8.regards.arles. 109 PTR poste9.regards.arles. 110 PTR poste10.regards.arles. 111 PTR poste11.regards.arles. 112 PTR poste12.regards.arles. 113 PTR poste13.regards.arles. 114 PTR poste14.regards.arles. --8<--------------------------------------- Any suggestions? cheers from the sunny South of France, Niki

2 1

operation on the client is slow when openldap servers are down
by XUFENG 11 Jun '10

11 Jun '10

  @import url( C:\Documents and Settings\Administrator\Local Settings\Temporary Internet Files\scrollbar.css ); Hi List,   OS: centos5.3 x86_64 OpenLDAP is installed using yum.   I find that when all the ldap servers are down and offline, the operations on the client is slow. When I try to do `ls` on the directories on the client as root, it waits there for some seconds.(root is not local account not via ldap) But when I power on the openldap servers, it is much better.   The configuration on the client:   [root(a)xxxx ~]# cat /etc/ldap.conf  base dc=xxxx,dc=com timelimit 1 bind_timelimit 1 nss_initgroups_ignoreusers root,ldap,named,avahi,haldaemon,dbus,radvd,tomcat,radiusd,news,mailman,nscd,gdm uri ldaps://auth1.xa.xxxx.com:636 ldaps://auth2.xa.xxxx.com:636 ssl on tls_checkpeer yes tls_cacertdir /etc/openldap/cacerts tls_cacertfile /etc/openldap/cacerts/cacert.pem pam_password md5 bind_policy soft   [root(a)xxxx ~]# cat /etc/openldap/ldap.conf  URI ldaps://auth1.xa.xxxx.com:636 ldaps://auth2.xa.xxxx.com:636 BASE dc=xxxx,dc=com TLS_CACERTDIR /etc/openldap/cacerts TLS_CACERT /etc/openldap/cacerts/cacert.pem TLS_REQCERT demand   [root(a)xxxx ~]# cat /etc/nsswitch.conf  passwd:     files ldap shadow:     files ldap group:      files ldap hosts:      files dns bootparams: nisplus [NOTFOUND=return] files ethers:     files netmasks:   files networks:   files protocols:  files rpc:        files services:   files netgroup:   files ldap publickey:  nisplus automount:  files ldap aliases:    files nisplus     Any suggestions?

3 2

md0 and moving to another system
by aurfalien＠gmail.com 11 Jun '10

11 Jun '10

Hi all, I thought to have tested this a while ago but I guess not. I have a Centos 5.3 system (call its SYSA) software raid 0, 2 disks. I have an identical system (SYSB) else were, so I pull one of my mirrors drives from SYSA and put it in SYSB as the only drive in SYSB. Upon but I get grub error. I boot in recuse mode (CD, linux rescue) and it attempts to mount the disk, but claims no partitions exists. I drop into a shell and mount it w/o issues. Running fdisk on the drive tells me its got 2 partitions which is true. I set this up as ext3, no LVMs, etc... with root and the other partition being swap. I've always thought that all I can do in the event of motherboard failure os to have a duplicate system around and merely move a dive off to it. - aurf

2 2

Kickstart issue: 'dialog' doesn't work in %post, CentOS 5.5
by Zhang Huangbin 10 Jun '10

10 Jun '10

Hi, all. I'm trying to customize a CentOS installation cd, but got trouble with kickstart. I want to use dialog[1] for command line based user interface, but it can't display correctly in kickstart with CentOS 5.5. Same ks file works with CentOS 5.3 (both i386 and x86_64). What's the different between CentOS 5.3/5.5? I can't find it in release notes. And how can i fix it? Thanks very much. :) My ks file: # ========== install cdrom key --skip auth --useshadow --enablemd5 keyboard us lang en_US logging --level=debug selinux --disabled skipx timezone Asia/Hong_Kong text services --enabled=network bootloader --location=mbr zerombr clearpart --all --initlabel rootpw --iscrypted $1$h7EtIFv4$R9JQ4aCOVN7E9ml3A2SXv. firstboot --disable network --onboot=yes --bootproto=dhcp --hostname='iredos.iredmail.org' part swap --bytes-per-inode=4096 --fstype="swap" --size=512 part / --bytes-per-inode=4096 --fstype="ext3" --grow --size=1 %packages --excludedocs basesystem dialog %post --nochroot echo "* Mount CDROM" mkdir -p /mnt/sysimage/mnt/ mount -t iso9660 /tmp/cdrom /mnt/sysimage/mnt %post # Run in chrooted env. echo "* Export LC_ALL" export LC_ALL=C echo "* Set TERM" export TERM='linux' echo "* Set PATH" export PATH="/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin" dialog --yesno "Yes or no" 0 0 # ======== END KS ========= [1] dialog: http://hightek.org/dialog/

3 10

Openwebmail dependency problem
by Jussi Hirvi 10 Jun '10

10 Jun '10

Ok, I have to ask. I tried to yum install the latest openwebmail (from the openwebmail repo), and got a transaction check error about a conflict with some packages which are needed by amavisd and spamassassin (packages originating from rpmforge, I think). Below is the yum output. By googling I found a lot of descriptions of the problem, but no solution. - Jussi (...) Resolving Dependencies --> Running transaction check ---> Package openwebmail.i386 0:2.53-3 set to be updated --> Processing Dependency: openwebmail-data = 2.53-3 for package: openwebmail --> Processing Dependency: perl-suidperl for package: openwebmail --> Processing Dependency: perl-Compress-Zlib for package: openwebmail --> Running transaction check ---> Package openwebmail-data.i386 0:2.53-3 set to be updated ---> Package perl-Compress-Zlib.noarch 0:2.015-1.el5.rf set to be updated ---> Package perl-suidperl.i386 4:5.8.8-27.el5 set to be updated --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: openwebmail i386 2.53-3 openwebmail 2.4 M Installing for dependencies: openwebmail-data i386 2.53-3 openwebmail 7.3 M perl-Compress-Zlib noarch 2.015-1.el5.rf rpmforge 34 k perl-suidperl i386 4:5.8.8-27.el5 base 60 k Transaction Summary ================================================================================ Install 4 Package(s) Upgrade 0 Package(s) Total download size: 9.9 M Is this ok [y/N]: y Downloading Packages: (1/4): perl-Compress-Zlib-2.015-1.el5.rf.noarch.rpm | 34 kB 00:00 (2/4): perl-suidperl-5.8.8-27.el5.i386.rpm | 60 kB 00:00 (3/4): openwebmail-2.53-3.i386.rpm | 2.4 MB 00:11 (4/4): openwebmail-data-2.53-3.i386.rpm | 7.3 MB 00:34 -------------------------------------------------------------------------------- Total 211 kB/s | 9.9 MB 00:47 warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID cfb164d8 openwebmail/gpgkey | 1.3 kB 00:00 Importing GPG key 0xCFB164D8 "Thomas Chung <tchung(a)openwebmail.org>" from http://openwebmail.org/openwebmail/download/redhat/rpm/release/RPM-GPG-KEY-… Is this ok [y/N]: y Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Check Error: file /usr/lib/perl5/vendor_perl/5.8.8/Compress/Zlib.pm from install of perl-Compress-Zlib-2.015-1.el5.rf.noarch conflicts with file from package perl-IO-Compress-2.024-1.el5.rf.noarch file /usr/share/man/man3/Compress::Zlib.3pm.gz from install of perl-Compress-Zlib-2.015-1.el5.rf.noarch conflicts with file from package perl-IO-Compress-2.024-1.el5.rf.noarch -- Jussi Hirvi * Green Spot Topeliuksenkatu 15 C * 00250 Helsinki * Finland Tel. +358 9 493 981 * Mobile +358 40 771 2098 (only sms) jussi.hirvi(a)greenspot.fi * http://www.greenspot.fi

3 3

yum in CentOS 3.9
by Lars Hecking 10 Jun '10

10 Jun '10

I need to support 3.9 for another while and thought I would set up a local repo with base and updates merged into one. How can I update repodata? I don't see createrepo in 3.9. --------------------------------------------------------------- This message and any attachments may contain Cypress (or its subsidiaries) confidential information. If it has been received in error, please advise the sender and immediately delete this message. ---------------------------------------------------------------

3 2

Intel ICH10R on CentOS 5.4
by nate 10 Jun '10

10 Jun '10

Hey there.. I was wondering if anyone could share experiences they have had with the Intel ICH10R SATA controller? I tried looking around but all I could find were RAID references, I have no interest in using the RAID functionality just basic SATA JBOD. Wondering if there are any gotchas for performance, drivers, quality etc. I normally don't touch anything that is not hardware RAID though this is a special project.. And even if I get demo gear I won't have enough time to put it through real paces(likely need weeks) before a decision needs to be made. I don't see anything that is causing alarm but just curious if anyone else has experiences. thanks nate

4 4

PXE boot into rescue mode
by Ruslan Sivak 10 Jun '10

10 Jun '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I followed the instructions here: http://nixcraft.com/file-servers/14803-how-centos-5-pxe-linux-installation-…, along with a few other sources that were less successful, and I finally got a pxe boot going. I'm using CentOS 5.3 x86_64 media as the source. The server boots, but keeps hanging. Here is my boot line: images/centos/5/x64/vmlinuz com2=57600,8n1 console=com2,vga vga=normal initrd=images/centos/5/x64/initrd.img ramdisk_size=32768 text rescue console=ttyS1,57600n8 console=tty1 raid=noautodetect debug noquiet And here's how it hangs: Loading images/centos/5/x64/vmlinuz................................. Loading images/centos/5/x64/initrd.img.......................................... .............................................................. Ready. Linux version 2.6.18-128.el5 (mockbuild(a)builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Jan 21 10:41:14 EST 2009 Command line: com2=57600,8n1 console=com2,vga vga=normal initrd=images/centos/5/x64/initrd.img ramdisk_size=32768 text rescue console=ttyS1,57600n8 console=tty1 raid=noautodetect debug noquiet BOOT_IMAGE=images/centos/5/x64/vmlinuz BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 00000000bfb50000 (usable) BIOS-e820: 00000000bfb50000 - 00000000bfb66000 (reserved) BIOS-e820: 00000000bfb66000 - 00000000bfb85c00 (ACPI data) BIOS-e820: 00000000bfb85c00 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000740000000 (usable) DMI 2.5 present. ACPI: RSDP (v002 DELL ) @ 0x00000000000f2160 ACPI: XSDT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f21fc ACPI: FADT (v003 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bfb83524 ACPI: MADT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bfb83078 ACPI: SPCR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bfb83130 ACPI: HPET (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bfb83184 ACPI: MCFG (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bfb831c0 ACPI: WD__ (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bfb83200 ACPI: SLIC (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bfb83338 ACPI: ERST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bfb6c844 ACPI: HEST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bfb6ca54 ACPI: BERT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bfb6c6c4 ACPI: EINJ (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bfb6c6f4 ACPI: TCPA (v002 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bfb834bc ACPI: SSDT (v001 DELL PE_SC3 0x00000011 INTL 0x20050624) @ 0x00000000bfb6a996 ACPI: SSDT (v001 DELL PE_SC3 0x00000011 INTL 0x20050624) @ 0x00000000bfb6b03c ACPI: SSDT (v001 DELL PE_SC3 0x00000011 INTL 0x20050624) @ 0x00000000bfb6b6e2 ACPI: SSDT (v001 DELL PE_SC3 0x00000011 INTL 0x20050624) @ 0x00000000bfb6bd88 ACPI: SSDT (v001 DELL PE_SC3 0x00000010 INTL 0x20050624) @ 0x00000000bfb6c42e ACPI: DSDT (v001 DELL PE_SC3 0x00000001 INTL 0x20050624) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-0000000740000000 Bootmem setup node 0 0000000000000000-0000000740000000 Memory for crash kernel (0x0 to 0x0) notwithin permissible range disabling kdump On node 0 totalpages: 7233511 DMA zone: 2655 pages, LIFO batch:0 DMA32 zone: 766856 pages, LIFO batch:31 Normal zone: 6464000 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) Processor #7 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[32]) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 32-55 ACPI: IOAPIC (id[0x0a] address[0xfec81000] gsi_base[64]) IOAPIC[2]: apic_id 10, version 32, address 0xfec81000, GSI 64-87 ACPI: IO®zÂÙµ±¥¹ÕéÿInitializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) Checking aperture... PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x405d000 - 0x805d000 Memory: 28811752k/30408704k available (2494k kernel code, 543192k reserved, 1263k data, 200k init) Calibrating delay using timer specific routine.. 4658.32 BogoMIPS (lpj=2329162) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) SMP alternatives: switching to UP code ACPI: Core revision 20060707 Using local APIC timer interrupts. result 20781263 Detected 20.781 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/4 APIC 0x6 Initializing CPU#1 Calibrating delay using timer specific routine.. 4655.05 BogoMIPS (lpj=2327528) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU 5140 @ 2.33GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 4655.03 BogoMIPS (lpj=2327518) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU 5140 @ 2.33GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 3/4 APIC 0x7 Initializing CPU#3 Calibrating delay using timer specific routine.. 4654.97 BogoMIPS (lpj=2327487) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 3 CPU: Processor Core ID: 1 CPU3: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU 5140 @ 2.33GHz stepping 06 Brought up 4 CPUs testing NMI watchdog ... OK. time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. time.c: Detected 2327.503 MHz processor. sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=216 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=96 bytes sizeof(skbuff)=240 bytes migration_cost=16,9133 checking if image is initramfs... it is Freeing initrd memory: 6485k freed NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 PCI: Dell PowerEdge 1950 detected, enabling pci=bfsort. ACPI: Interpreter enabled ACPI: UsingPCI-GART: No AMD northbridge found. pnp: 00:08: ioport range 0x800-0x87f could not be reserved pnp: 00:08: ioport range 0x880-0x8bf has been reserved pnp: 00:08: ioport range 0x8c0-0x8df has been reserved pnp: 00:08: ioport range 0x8e0-0x8e3 has been reserved pnp: 00:08: ioport range 0x900-0x900 has been reserved pnp: 00:08: ioport range 0xc00-0xc7f has been reserved pnp: 00:08: ioport range 0xca0-0xca7 has been reserved pnp: 00:08: ioport range 0xca9-0xcab has been reserved pnp: 00:09: ioport range 0xca8-0xca8 has been reserved pnp: 00:09: ioport range 0xcac-0xcac has been reserved PCI: Bridge: 0000:08:00.0 IO window: disabled. MEM window: f4000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:07:00.0 IO window: disabled. MEM window: f4000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:07:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:06:00.0 IO window: disabled. MEM window: f4000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:06:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: f2000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:01:00.0 IO window: disabled. MEM window: fc500000-fc6fffff PREFETCH window: d8000000-d80fffff PCI: Bridge: 0000:01:00.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: fc400000-fc6fffff PREFETCH window: d8000000-d80fffff PCI: Bridge: 0000:0c:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: fc300000-fc3fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:04:00.0 IO window: disabled. MEM window: f8000000-fbffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: f8000000-fbffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: e000-efff MEM window: fc100000-fc2fffff PREFETCH window: d0000000-d7ffffff GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:06:00.0 to 64 ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:07:00.0 to 64 PCI: Setting latency timer of device 0000:08:00.0 to 64 ACPI: PCI Intide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S4 S5) Freeing unused kernel memory: 200k freed Write protecting the kernel read-only data: 482k Does anyone know what could be wrong? I just need to get to a shell and get into fdisk. Russ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iD8DBQFMEBpKGUZBYlCheYcRAkd6AKC/QeBNqnpmR+D8Aq9KaCF4HAglngCfVytH 08/fy6t85DZXeWHt4hTI9I4= =ApnE -----END PGP SIGNATURE-----

2 1

← Newer
1
...
11
12
13
14
15
16
17
18
19
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss June 2010