Discuss

discuss@lists.centos.org

34758 discussions

Directories not writable (Apache/PHP)
by Mark Fitzsimmons 09 Oct '06

09 Oct '06

Hi, I have a new CentOS sever install. I've also installed suPHP to replicate a live server. When I upload file via FTP the permissions seem OK, however the directories copied are not writable?? Any ideas? I have tried chmod 777 and that's not working either. Could is be a suPHP issue? I have 'suPHP_UserGroup GROUP USER' setup in my virtual directory and the user is also in the users & groups. The suPHP log file shows the php file executing OK. Any ideas? Thanks, Mark.

1 0

2TB limit, weird mounting issues on reboot
by W S 09 Oct '06

09 Oct '06

Greetings, I'm seeing some weird issues surrounding the 2 terabyte limit on my 3ware (9590SE, PCI Express model) raid controller. Currently, the raid array is 6 x 500GB disks for a total of around 2.3 terabytes formatted. Looking at the documentation on the 3ware site, the raid card can handle a single partition over 2TB, but it still looks like fdisk fails to create a primary partition over the 2TB limit. I did resort to parted, and it creates a partition over 2TB. And, in fact, I can run mke2fs on this partition, and mount it. I also have an entry for this partition in the /etc/fstab file. However, if I reboot the system, the partition fails to mount from the init scripts. If I comment out the /etc/fstab line, and run a mount command from rc.local, that works; however, the partition is now seen as a 259GB partition, and not the 2.3TB I originally had to start. I have the feeling the partition table is getting hosed on a reboot. Fdisk seems to handle the partition on the raid array just fine if it is a hair under 2TB, and from all the things I've read, it seems fdisk and other disk utilities still have real problems with partitions greater than 2TB (32-bit x 512-byte blocks, etc). I guess I'm shocked. I figured this wouldn't be an issue as of 2006, but it still is..... anyone have any similar experiences? If so, any workarounds other than just stay at the 2TB limit? Regards, Will

6 8

CentOS-announce Digest, Vol 20, Issue 2
by centos-announce-request＠centos.org 08 Oct '06

08 Oct '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0689 Important CentOS 4 x86_64 kernel - security update (Johnny Hughes) 2. CESA-2006:0689 Important CentOS 4 i386 kernel - security update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Sat, 07 Oct 2006 12:42:47 -0500 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2006:0689 Important CentOS 4 x86_64 kernel - security update To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <1160242967.5013.80.camel(a)myth.home.local> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2006:0689 https://rhn.redhat.com/errata/RHSA-2006-0689.html The following updated files have been uploaded and are currently syncing to the mirrors: x86_64: kernel-doc-2.6.9-42.0.3.EL.noarch.rpm kernel-2.6.9-42.0.3.EL.x86_64.rpm kernel-devel-2.6.9-42.0.3.EL.x86_64.rpm kernel-largesmp-2.6.9-42.0.3.EL.x86_64.rpm kernel-largesmp-devel-2.6.9-42.0.3.EL.x86_64.rpm kernel-smp-2.6.9-42.0.3.EL.x86_64.rpm kernel-smp-devel-2.6.9-42.0.3.EL.x86_64.rpm src: kernel-2.6.9-42.0.3.EL.src.rpm

1 0

lm_sensors rpm
by Michael Kress 08 Oct '06

08 Oct '06

Hello, maybe you're interested in building an rpm of lm_sensors containing a more recent lm_sensors rpm (latest snapshot 'r4197-20061007'). Then have a look at http://lists.lm-sensors.org/pipermail/lm-sensors/2006-October/018052.html Perhaps there's someone who wants to take over maintenance for building this rpm from the snapshots in some other repo than the base one... (I don't have time for that). At least, this rpm works for me now on a x86_64 and I thought, I'd share it with the centos folks out there. cu - Michael -- Michael Kress, kress(a)hal.saar.de http://www.michael-kress.de / http://kress.net P E N G U I N S A R E C O O L

1 0

problems with LVM and upgrade new kernel 2.6.18
by Thijs Joosten - Netfeed 07 Oct '06

07 Oct '06

Dear, I have a lot of problems with LVM of CentOS when upgrading to the new kernel 2.6.18. When I have compiled the new kernel and I insert the new rules in the GRUB configuration and when I restart the server I get the warnings that the group volume VolGroup00 not found and then the kernel has a panic situation (Kernal panic - not syncing: Attempting to kill init!). This problem I have on several servers, so it is not hardware related but I think CentOS software related. After a lot of searching on the internet I have seen many people with this problem but mostly no solution. At http://www.gatago.com/linux/redhat/20330778.html I read almost the same story and a solution but the solution does not work for me and I see the same situation at http://www.centos.org/modules/newbb/viewtopic.php?topic_id=5087 I do not know what do to any more, hopefully you can help me with getting kernel 2.6.18 working. CentOS systems: 4.3 en 4.4 Kernel: 2.6.18 Kernelconfig: http://www.netfeed.nl/software/kernels/2.6.18/kernelconfig Many thanks in advance! -- Met vriendelijke groeten / Kind regards, Thijs Joosten

2 1

centos 4.4's kernel source
by Valentín González E. 07 Oct '06

07 Oct '06

Hi, Where i can get the centos 4.4's kernel source in rpm format? VG -- "Algunos triunfan porque están destinados al exito, los demás triunfan porque están decididos a hacerlo."

2 1

sylpheed not executing HTML addess on clicking
by Richard E Miles 07 Oct '06

07 Oct '06

I use sylpheed version 2.0.4 on Centos 4.4. Somehow the double clicking on an HTML address is not working. This used to work before. Why would this be happining? -- Richard Miles Federal Way WA. USA registered linux user 46097

2 1

2.6.18 Kernel
by Drew Weaver 06 Oct '06

06 Oct '06

Are there any plans for Redhat/CentOS to implement the 2.6.18 Kernel which adds support for the Core 2 Duo chipsets, i.e. 965, 975, and 946? Thanks, -Drew

4 6

RE: [CentOS] Re: Apache and PHP
by Mark Fitzsimmons 06 Oct '06

06 Oct '06

Thanks but I've just fixed it. I just needed to tweak the suphp.conf to the correct web file location and bingo! > > If I take out all my suphp from the apache conf, it trys to download the > .php file rather than running it. > > What's the best log file to trouble shoot this?? > hmmm rpm -q php if php is installed, make sure you restart httpd > Thanks in advance, Mark. _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

Apache and PHP
by Mark Fitzsimmons 06 Oct '06

06 Oct '06

Sorry for the newbee setup questions, but... Should PHP be already setup with apache on the centos server install?? It's just that I can't get PHP working at all. It's 100% me, I just don't have enough experience. There is already a PHP.ini file, if I add any php modules in apache conf and run httpd -S is says it's already running a php module. I am using vhosts. I did start by trying to use/install suphp as I'm trying to replicate another server but when suphp engine is on I get a 500 error on .php pages. If I take out all my suphp from the apache conf, it trys to download the .php file rather than running it. What's the best log file to trouble shoot this?? Thanks in advance, Mark.

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss