Discuss March 2007

discuss@lists.centos.org

337 participants
401 discussions

RE: [CentOS] Re: LDAP Server configs
by Mark Schoonover 13 Mar '07

13 Mar '07

John Summerfield wrote: > Mark Schoonover wrote: >> centos(a)911networks.com wrote: >> >> >>> Stuff Snipped... >> >> >> >>> Now, what would be a proper help if the person would have started >>> the same email with: >>> >>> I have searched on Google and ... >> >> >>> From the man himself: >> >> http://www.catb.org/~esr/faqs/smart-questions.html >> >> Following these directions on how to ask questions. > > Thamks Mark. I don't entirely agree with everything ESR says about the > topic, but it's a heck of a good start:-) Well, I don't agree 100% of anything from anyone, unless my wife is in the room! I don't think there's a human on the planet that agrees 100% with anyone. ESR does make a lot of sense in how to ask questions, and I do my best to follow those guidelines, and honestly, following his thoughts has rarely gotten me into any hotwater on any list. Thanks! Mark Schoonover *** Winner of the 2008 Best Psychic Award IS Manager American Geotechnical - California, Nevada and Arizona V-> 858.450.4040 F-> 714.685.3909 C-> 858.472.3816

1 0

Dependency problem - libijs.so
by Robert Moskowitz 13 Mar '07

13 Mar '07

In a yum update I got: --> Running transaction check --> Processing Dependency: libijs.so for package: gimp-print --> Finished Dependency Resolution Error: Missing Dependency: libijs.so is needed by package gimp-print But slocate libijs.so Resulted in: /usr/lib/libijs.so So why the dependency error?

3 4

Centos-specific Denyhosts Howto Anyone?
by Karl R. Balsmeier 13 Mar '07

13 Mar '07

Hi, after reading the docs (no man page) and seeing a few example howtos, I see none for Centos specifically. I hereby offer to write this and even host it, and any other wiki-able howto you want, if you can school me on the first few steps relevant to how to link up the current rpmforge rpm for RHEL4-64. See, right now, the one for centos loads into the /usr/share/doc, which is an odd place to stash an executable, -logic perhaps being you just symlink however you want. Now having a time to spare, I appeal to you with paypal beer $. I'd like to of course script this specifically for centos. I have firewall rules and other protections, but it's (denyhosts) too cool to pass up. reminds me a bit of portsentry, or whatever they call it now, tri-sentry, maybe it's quad-sentry now or... I can also trade you some mega-spiffy ultra-detailed centos build scripts for tomcat servers, squid machines, etc. -krb

5 4

Re: LDAP Server configs
by kintaro oe 13 Mar '07

13 Mar '07

I tried to start the ldap server: service ldap start and it says ok..but when i tried to look at the messages logs this shows: Mar 11 07:48:16 main slaptest: sql_select option missing Mar 11 07:48:16 main slaptest: auxpropfunc error no mechanism available Mar 11 07:48:16 main ldap: succeeded Mar 11 07:48:16 main slapd[9183]: sql_select option missing Mar 11 07:48:16 main slapd[9183]: auxpropfunc error no mechanism available Mar 11 07:48:16 main ldap: slapd startup succeeded What does this mean? kintaro oe <kintaro0e_benkyo(a)yahoo.com> wrote: Hi Guys, I'm creating an ldap server for my network. I'm quite confuse about /etc/ldap.conf and /etc/openldap/ldap.conf files. What are the difference of those two config files? Thanks! cheers, kintaro Oe --------------------------------- Need Mail bonding? Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users. cheers, kintaro Oe --------------------------------- Never miss an email again! Yahoo! Toolbar alerts you the instant new Mail arrives. Check it out.

5 9

RE: [CentOS] Re: LDAP Server configs
by Mark Schoonover 13 Mar '07

13 Mar '07

centos(a)911networks.com wrote: >Stuff Snipped... > Now, what would be a proper help if the person would have started > the same email with: > > I have searched on Google and ... >From the man himself: http://www.catb.org/~esr/faqs/smart-questions.html Following these directions on how to ask questions. Thanks! Mark Schoonover *** Winner of the 2008 Best Psychic Award IS Manager American Geotechnical - California, Nevada and Arizona V-> 858.450.4040 F-> 714.685.3909 C-> 858.472.3816

2 1

PgSQL development libraries?
by Devraj Mukherjee 13 Mar '07

13 Mar '07

Hi, I am trying to compile an application (PowerDNS) with PostgreSQL support. Where do the PowerDNS libraries get installed under CentOS? I am constantly getting the error checking for PgSQL library directory... configure: error: Didn't find the pgsql library dir in '/usr/include/lib/pgsql /usr/include/pgsql /usr/include' -- "I never look back darling, it distracts from the now", Edna Mode (The Incredibles)

4 4

HAVP 0.85 on CENTOS
by Indunil Jayasooriya 13 Mar '07

13 Mar '07

Hi all, HAVP 0.85 has been released and also added support for ClamAV 0.90 library. But there is still no rpm available for HAVP 0.85. Dag has HAVP 0.82. (havp-0.82-1.el4.test.i386.rpm<http://dag.wieers.com/rpm/packages/havp/havp-0.82-1.el4.test.i386.rpm>) . Does it support ClamAV 0.90 library ? Can I make a RPM out of current version of Havp Version 0.85 ? If so, How can do it? -- Thank you Indunil Jayasooriya

2 1

raid array device partition missing
by Jerry Geis 12 Mar '07

12 Mar '07

From looking at mdstat it appears I have a RAID partition missing. There are NO errors in /var/log/messages about disk errors or anything. What happened to my sda1??? I had a power outage last week. Any ideas??? Jerry more /proc/mdstat Personalities : [raid1] md1 : active raid1 sdb3[1] sda3[0] 236717696 blocks [2/2] [UU] md0 : active raid1 sdb1[1] 51199040 blocks [2/1] [_U]

2 1

How do I configure additional serial ports?
by Alfred von Campe 12 Mar '07

12 Mar '07

I have installed two 4-port serial cards (http://www.startech.com/ Product/ItemDetail.aspx?productid=PCI4S550&c=US) on a CentOS 4.4 system. The hardware appears to be recognized correctly, as kudzu added 2 entries to /etc/sysconfig/hwconf and lscpi shows both cards (output of lspci -vv for both cards included at the end of this email): # lspci 00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corporation 945G/GZ/P/PL Express PCI Express Root Port (rev 02) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation NV44 [GeForce 6200 TurboCache(TM)] (rev a1) 02:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03) 0a:0a.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) 0a:0a.1 Bridge: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 1 (8bit bus) 0a:0c.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) 0a:0c.1 Bridge: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 1 (8bit bus) However, only the 4 serial ports on one of the two cards are configured correctly: # dmesg | fgrep ttyS ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS4 at I/O 0x5020 (irq = 177) is a 16C950/954 ttyS5 at I/O 0x5028 (irq = 177) is a 16C950/954 ttyS6 at I/O 0x5030 (irq = 177) is a 16C950/954 ttyS7 at I/O 0x5038 (irq = 177) is a 16C950/954 ttyS1 at I/O 0x5060 (irq = 193) is a 16450 ttyS2 at I/O 0x5068 (irq = 193) is a 16450 ttyS3 at I/O 0x5070 (irq = 193) is a 16450 I have no idea what ttyS1-3 are, but I've tested ttyS4-7 and they work fine. If I only install one card (in either PCI slot 1 or 2) I get the same 4 ports. If I install both cards, ttyS4-7 work on the card that is in PCI slot 2. Any ideas how to get the 4 ports on the other card working? Alfred 0a:0a.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) (prog-if 06 [16950]) Subsystem: Oxford Semiconductor Ltd: Unknown device 0000 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 177 Region 0: I/O ports at 5020 [size=32] Region 1: Memory at d2101000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 5000 [size=32] Region 3: Memory at d2100000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0 +,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0a:0a.1 Bridge: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 1 (8bit bus) Subsystem: Oxford Semiconductor Ltd: Unknown device 0000 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 193 Region 0: I/O ports at 5060 [size=32] Region 1: Memory at d2103000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 5040 [size=32] Region 3: Memory at d2102000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0 +,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0a:0c.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) (prog-if 06 [16950]) Subsystem: Oxford Semiconductor Ltd: Unknown device 0000 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 217 Region 0: I/O ports at 50a0 [size=32] Region 1: Memory at d2105000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 5080 [size=32] Region 3: Memory at d2104000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0 +,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0a:0c.1 Bridge: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 1 (8bit bus) Subsystem: Oxford Semiconductor Ltd: Unknown device 0000 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 225 Region 0: I/O ports at 50e0 [size=32] Region 1: Memory at d2107000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 50c0 [size=32] Region 3: Memory at d2106000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0 +,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

7 13

Problem in Mounting Exaclibur 4GB USB Pen Drive on Centos4.0
by ankush grover 12 Mar '07

12 Mar '07

Hi Friends, I have an Excalibur 4GB USB Pen Drive Model Number EXC4. I think it is getting detected by the Centos but I am not sure about the mount point or the device point it is taking /dev/s?? Logs from /var/log/messages. Mar 11 11:30:06 l_l_box kernel: usb 1-1: USB disconnect, address 3 Mar 11 11:30:22 l_l_box kernel: usb 1-1: new high speed USB device using address 4 Mar 11 11:30:22 l_l_box kernel: scsi2 : SCSI emulation for USB Mass Storage devices Mar 11 11:30:22 l_l_box kernel: Vendor: CORNICE Model: Inc. Storage Ele Rev: 0 0 Mar 11 11:30:22 l_l_box kernel: Type: Direct-Access ANSI SCSI revision: 02 Mar 11 11:30:22 l_l_box scsi.agent[17229]: disk at /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/host2/target2:0:0/2:0:0:0 sg3-utils are also installed on the system but sg_scan -i returns nothing Output of /proc/bus/usb/devices T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.9-5.0.3.EL uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.2 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.9-5.0.3.EL uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.1 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.9-5.0.3.EL uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.0 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.9-5.0.3.EL ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1d.7 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=14cd ProdID=6600 Rev= 2.01 S: Manufacturer=Super Top S: Product=USB 2.0 IDE DEVICE S: SerialNumber=?????????? C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Please let me know if you need any further inputs. Thanks & Regards Ankush Grover

3 2

← Newer
1
...
26
27
28
29
30
31
32
...
41
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss March 2007